HP Laserjet p4015 auto select envelop feeder

Client machine will not automatically select envelope feeder when printing envelopes. I have two windows 7 clients using the same driver and same versions of software printing to the same Lazerjet P4015 printer. One selects automaticly selects the envelope feeder and the other client does not. The envelope feeder is available for manual selection, but the print job is not automatically directed to the envelope feeder like on the other client machine. I’ve tried reinstalling driver and software with no luck. Any ideas?
Both machines are running windows 7 professional (64bt) and office 2013.

I initially called HP tech support on this issue, and was told that HP's printer drivers for Mac did not support this feature (even though the hardware was capable of it). Turns out that was BS (and the tech support guy I talked to clearly knew very little about it). HP's network printers have a built-in web server. You log-in by going by going to the IP address using Safari or your preferred browser. You can turn on and set up these options, and more, via the web-server. Easy as pie, once you know what to do.

Similar Messages

Can't select envelope feeder on HP LaserJet 4250tv

My office has an iMac running OS 10.6.4. Data and programs were transferred from an older iMac running OS 10.5.8.
The computer will no longer allow you to select the envelope feeder on our HP LaserJet 4250tn. If you try to print an envelope from Word or another program (InTouch With) and select the envelope feeder a message pops up that says "Changing the setting of Paper Source to Envelope Feeder would cause a conflict that cannot be resolved. No change will be made."
None of the other computers using this printer have this problem. There are two other iMacs using it, one running OS 10.5.8.
I'm unable to figure out what the conflict would be so that I can resolve the issue.
If you send the print job it tries to print from tray 1. If you remove the paper from tray 1 first the printer allows you to change the job to the envelope feeder.

I'm having this same issue with a P4015 and envelope feeder.
The printer is managed by MCX and has the envelope feeder checked in the driver tab. The print dialog lets us select the envelope feeder under the "paper feed" settings, but then the error pops up.
Anyone have a way to fix this?

HP Laserjet w Envelope Feeder

Hi there,
I have a power user who needs to print 50-100 envelopes a day. The HP Laserjet P4015 has a dedicated envelope feeder in tray #1, but we cannot seem to get that to work for more than a single envelope. The App is MS Word 2011, but the 2008 version had the same issue.
Any suggestions would be greatly appreciated. I've already posted in the HP and Mactopia forums.
Barn

This issue was a bug in the printer driver for 10.6.4. This has been escalated to Engineering/Development in HP, and they promise it to be resolved in the next update to the drivers. Case 4621417946.

HP LaserJet 600 M601 doesn't want to use envelope feeder

1. HP LaserJet 600 M601
2. Windows XP 32-bit
3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print. Then prints OK.
4. New printer.
5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
Driver is configured with correct trays and printer with paper types.
User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
Tray configuration:
Envelope Feeder: Envelope #10, Envelope
Tray 1: Legal, Plain
Tray 2: Letter, Any Type
Tray 3: Letter, Letterhead
Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
Firmware: 2131305_192069

Just got off the phone with HP on the very same issue using a 602dn printer. What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ). You'll want the PS driver, not the PCL6 one. When you exctract it, update your driver to the v5.4 driver. I don't know why that would have fixed it, but it did. Let me know if it works for you.

Printing Envelopes Other Than #10 with HP LaserJet 4240 Envelope Feeder

I'm trying to use an HP LaserJet 4240 and an HP 75-sheet Envelope Feeder to print envelopes from FileMaker Pro. HP's specifications for the envelope feeder note that it accepts "various sizes of envelopes." However, we are unable to specify any size other than #10 envelopes in the print dialog box. #10 envelopes print just fine, but choosing a different envelope size (like C5) in Page Setup and attempting to print brings up an error message saying that only #10 envelopes can be printed and asking if the document should be scaled to fit that size envelope. If you agree and continue printing, the printer shows "Service Error" on its display.
The workaround I've used so far is to put text out to the very edge of the #10 margins in FileMaker and just load larger envelopes. This leaves too large a margin, however, and I'd really like to be able to print to the actual size of a C5 envelope.
I've tried specifying a letter sized sheet of paper and setting the paper feed to "Envelope Feeder" but the printer is smart enough to know that letter paper can't go through the feeder and asks to specify a different tray.
Has anyone succeeded in specifying a custom envelope size that will print via the envelope feeder? I don't want to have to manually feed envelopes into the printer as that's why we purchased the envelope feeder in the first place!
Thanks in advance for any suggestions anyone can offer.

try this FREE little widget - it's the best solution for printing all types of envelopes …
http://www.ambrosiasw.com/utilities/easyenvelopes/
Alan

HP LaserJet P2015 - Auto papersize selection with 3rd tray installed?

Hi,
Our office just bought an HP LaserJet P2015, and installed a third paper tray that we had to order from HP. In the pref's pane for the printer, I have checked the "Tray 3" check box. We have legal size paper in tray 3, and letter size in tray 2 (the built in tray).
No matter whether the page setup is set to letter or legal, every document prints from tray 3 on legal size paper. Is there a way to make the printer auto-select the correct paper size?
Thank you,
Tom

I initially called HP tech support on this issue, and was told that HP's printer drivers for Mac did not support this feature (even though the hardware was capable of it). Turns out that was BS (and the tech support guy I talked to clearly knew very little about it). HP's network printers have a built-in web server. You log-in by going by going to the IP address using Safari or your preferred browser. You can turn on and set up these options, and more, via the web-server. Easy as pie, once you know what to do.

HP LaserJet P2015 Tray 1 paper feed

My HP LaserJet P2015dn printer has been my workhorse printer since new, especially for printing checks, envelopes, forms from paper Tray 1. I always print using the Auto Select for paper feed, so that if there are checks/envelopes in Tray 1, they will be selected. For the past 6 weeks or so, the printer will not feed from Tray 1 on demand, that is will not pick paper from Tray 1 if Auto Select is enabled as I have used it in the past.
Printer will pick from Tray 1 IF Tray 1 is specifically selected OR Tray 2 has no paper or is removed. I doubt I can retrain myself to do either of these things as work arounds.
Stupidly, I paid a $50 bench fee for a technician to tell me the printer is mechanically working as it should. On further investigation, I have determined that the HP print drivers is use seem to have been installed on July 10, 2008 (about the time this issue started AFAIK) from a combined installer HPLaserJetP2015andColorLaserJet2605_2700.dmg which I installed for my Color LaserJet 2605dn printer.
I still have the prior LJP2015OSXfullsol.dmg on my hard disk, but reinstalling same does not seem to replace the new driver with the old.
So, is there any way to get rid of the the newer print software OR overlay the older on the newer? Other suggestions?

So, I cranked up my old PowerBook G4 (OS 10.4.11) which has the older driver for the P2015dn and the problem remains.
I have made some progress: If I want to print with paper feed from Tray 1, I pull Tray 2 out a few inches, load the paper in Tray 1, start the print job, and the yellow Attention LED flashes indicating an error. Note that the Paper Out light does NOT come on. So I press the Go button, the Attention LED goes out, and the print job completes using the forms in Tray 1 as desired.
So I'm thinking now, What Error condition? and why does clearing it make it print?
Certainly seems like a hardware problem to me as this is NOT the way the printer is supposed to work as documenetd in the User Guide.

How do I get my 8600 premium printer to auto select between tray 1 and tray 2?

How do I get my 8600 premium printer to auto select between tray 1 and tray 2? Right now, i have to pull out tray 1 to get the printer to feed tray 2.

Hi Retrotriker,
Follow the steps below to properly configure your paper trays.
1. Touch (right arrow), touch Setup, touch Preferences, and then select Default Tray
2. Select Tray 2 as the Default tray
3. Open Printers and Faxes
4. Right click on printer, and then select Printer Properties
5. Click on Device Settings tab
6. On this screen set the media type you have assigned to each tray (Example: tray 1 - Envelopes & Tray 2 - Letter)
7. Click Apply, and then Ok
8. When you have an envelope you are printing it will pull from Tray 1
9. When you have a letter you are printing it will pull from Tray 2
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

P2035 not auto selecting tray

For one of my users (P2035 / Windows 8) we are encountering the following new problems.
Under printing preferences:
Size: letter
Source: Auto Select
Type: Plain Paper
In multiple programs ( WordPerfect & Printing from Chrome browser )
If there is paper in tray 2 AND paper in tray 1 (the bypass tray) it will print from tray 2.
Previously it would detect that there is paper in tray 1 and print from tray 1. This is what I think of as “auto select”
If I load paper in tray 1 and remove tray 2 from the machine it will print from tray 1.
In our postage program (Stamps.com) we had it set to “auto select” for the source, but now it pulls plain paper from tray 2 even if there is an envelope in tray 1. I set it to “tray 1" and got the same results.
So I set the source to “manual feed from tray 1". And then it prompts to load paper and press the “go” button on the printer. Since the envelope is already in tray 1, I press the go button and it prints fine.
I have tried uninstalling the printer and reinstalling it from the original disk and I have tried the PLC5 driver without success.
Any assistance would be appreciated.
Thanks
More info:
This morning I swapped the printer that is giving me the problems (P2035) with another printer (P2015). The P2015 works fine, however the P2035 is still giving me the exact same issues at the new desk, I was not expecting that, and it makes me think it might be a hardware or firmware issue.
If it would never pick up from the bypass tray I would think that the switch that indicates paper in the bypass tray was defective, but with tray 2 removed it sees the paper in the bypass tray just fine.
Any thoughts?
Is there anyway to re-install or update the firmware?
Thanks

If the other network will not work with your mobile devices, you can remover that network or networks from your settings and then the iPad will not join them at all - unless you manually select them and join them again on your own.
Settings>WiFi>Tap on the blue arrow next to the name of the network that you want to remove. In the next window, tap on "Forget This Network". That will remove the unwanted network from the iPad and it will only join the mobile network that is listed in the settings - if that is the only network listed for the school.
I assume that this is would be OK with the IT folks if they dont want you to use the other networks, but what bothers me is why they would have set your iPad put so that you could use that network in the first place.

Can mac auto select pages for print by size

Hello, does anyone knows if there is a way how to set up on Mac auto selecting for printing pages by size? I need it to print loan documents for my notary public business. Using HP laser dual tray printer.

Hello Shane,
I am notary public and I would recieve file with documents that need to be printed on both legal and letter size paper. I used Adobe Acrobat from my husband's Windows computer which sorts the documents by paper size and then print's them out on correct size paper.
The printer I have is HP Laserjet 400 M401n.
Thank you for your help

Using Envelope Feeder

I'm trying to print a B5 envelope using an envelope feeder on an HP 4250n. Whenever I try to change the source tray to Envelope Feeder and print I get the following error:
"The Paper Source option, Envelope Feeder, is not available when the destination paper size is set to C31A79FA-689A-4E68-B6D2-C84008F6099B. To scale to fit to #10 Envelope, select Continue. To keep Paper Source at its previous setting, select Cancel."
I've changed the default size for the envelope feeder in printer properties to both B5 or Any Size, and it still gives me the above message and only wants a #10 envelope. Can anyone help?

This looks like a commercial product. The best place to get help for commercial products is the Business Support forum.
The Business Support forums are located here.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP LaserJet P4015 stopped responding

We have rolled out HP LaserJet P4015 in our entire School District. We have printer communication issue with this printer. It just stopped responding. have tried different versions of Driver, we have updated the firmware, too. Everytime we change the driver it will work and then stopped again. Is there anybody here experiencing the same problem?

I am having the same problem with my P2015dn. Looking at the posts indicate a number of models are having this problem. Mine workvia USB just fine. I can ping the printer, the router shows the printer, the printer shows ready but won't print and if you delete the printer and try and then go back to add printer - it is not found. Judging by the recent flourish of posts, I expect the answer will have something to do with the recent Windows Updates but nothing yet on the HP or Microsoft sites - just a lot of frustration and time wasted on the part of their customers! I hope some one has ideas

Auto selection of file from folder during uploading??

Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
Bikash

Hi Chandan,
                    All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
     wa_tab TYPE file_table,
       lw_file LIKE LINE OF it_tab,
       gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
   file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = file_str1
*    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
   tables
     data_tab                      = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.

HP Laserjet p4015 CB526A, duplex copy quality

I have a LJ P4015 that is putting a excess toner on the right side of the the paper when duplexing. It doesn't do it on single sided printing. It looks like it should be a fuser problem but I replaced that and it didn't fix it. I've also replaced the toner cartridge, duplexer, and transfer roller.
Any suggestions would be appreciated.

Hello,
It looks like the HP Laserjet p4015 series are enterprise printers. You may get better support posting your question in their support forums
HP Enterprise Business Community
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Batch handle with 'Auto Select' option

Hello Everyone!
We are trying to find out how the 'Auto Select' button works with batch handle.
Our customer wants to handle batches by FIFO.
We need to try if it is possible to 'Auto Select' batches by 'Admission Date'. Even when we found out that it is possible SBO does not do it rightly, because not always get well organized by 'Admission Date'.
Somebody knows which logic uses the 'Auto Select' option to select batches?
There is some configuration at SBO to handle batches by 'Admission Date'?
Thanks a lot!

The batch auto selection selects the batches according to the ascending alphanumeric order. To issue based on FIFO method, user has to identify the admission date/ manufacturing date of the batch and issue.
There is No configuration at SBO to handle batches by 'Admission Date'.
As a workaround you can use the batches to startwith 'Admission Date'.

HP Laserjet p4015 auto select envelop feeder

Similar Messages

Maybe you are looking for