HP Laserjet p4015 CB526A, duplex copy quality

I have a LJ P4015 that is putting a excess toner on the right side of the the paper when duplexing. It doesn't do it on single sided printing. It looks like it should be a fuser problem but I replaced that and it didn't fix it. I've also replaced the toner cartridge, duplexer, and transfer roller.
Any suggestions would be appreciated.

Hello,
It looks like the HP Laserjet p4015 series are enterprise printers. You may get better support posting your question in their support forums
HP Enterprise Business Community
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Similar Messages

  • HP LaserJet P4015 stopped responding

    We have rolled out HP LaserJet P4015 in our entire School District.  We have printer communication issue with this printer.  It just stopped responding. have tried different versions of Driver, we have updated the firmware, too.  Everytime we change the driver it will work and then stopped again.  Is there anybody here experiencing the same problem? 

    I am having the same problem with my P2015dn.  Looking at the posts indicate a number of models are having this problem.  Mine workvia USB just fine.  I can ping the printer, the router shows the printer, the printer shows ready but won't print and if you delete the printer and try and then go back to add printer - it is not found.  Judging by the recent flourish of posts, I expect the answer will have something to do with the recent Windows Updates but nothing yet on the HP or Microsoft sites - just a lot of frustration and time wasted on the part of their customers!  I hope some one has ideas

  • HP LaserJet Pro M1536 just copy and scan lines

    HP LaserJet Pro M1536 just copy and scan lines
    Hi, I have a problem with the multifunction suddenly.
    When I make a photocopy or when I scan to PC, both the ADF glass, leaving only the lines without any image of the sheet that I'm scanning. If mold from windows instead working normally.
    What might be?
    Greetings.
    Raffaele
    HP LaserJet Pro M1536 copia e scansiona solo righe
    Salve, ho un problema all'improvviso con la multifunzione.
    Quando faccio una fotocopia oppure quando scansiono verso il pc, sia dal vetro che dall'adf, escono solo delle righe senza alcuna immagine del foglio che sto scansionando. Se stampo da windows invece funziona normalmente.
    Da cosa può dipendere ?
    Saluti.
    Raffaele

    Hi Opp1,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand you are unable to reinstall the printer software.
    I will be happy to help you.
    The print spooler is part of the Windows operating system and if it doesn't stay running the printer software won't install or print.
    You could try the following steps to see if this will resolve the issue.
    Normally with spooler problems the first thing to do is to clear the print queue.
    Open a Run window (Windows Logo key+R), type cmd and press Enter.
    Now type these commands, which are in capitals for clarity:
    NET STOP SPOOLER and press Enter
    DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press Enter
    NET START SPOOLER and press Enter
    EXIT and press Enter
    If you are still having issues with the print spooler stopped then right click on the start button, left click on explore, open the windows folder, open system32 folder, open the spool folder, open the printer's folder, then delete everything on the right window.
    Then go back and try and start the print spooler again.
    Run a full uninstall of the printer software. Disconnect the USB cable.
    To uninstall from CD:
    Go start and select computer.
    Right click on the CD for the printer and left click open in a new window.
    Double click on uninstall.
    Uninstall printer from the C Drive.
    Go to start, computer, c:, windows, program files or program files x86, HP, printer name. Double click uninstall. Restart the computer.
    Check to make sure the print spooler is running.
    Ran the installation again. Don't connect the USB cable until prompted.
    If the print spooler stops again you will need to contact the computer manufacturer to resolve this issue.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a great weekend!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • CM6040mfp Color copy quality issues

    I posted this problem a couple of weeks ago and thought it was solved, but it turned out it was not (I could not find that post for some reason, so I started another one).  This machine puts out excellent quality prints when doing an internal test page or sending docs to it.  However, when copying, the quality is terrible (blacks look brown, grays look pink).  I performed a scanner calibration twice and it seemed to improve quite a bit.  I just got a note from the customer stating that the problem is back again.  My thinking is that the scanner mirrors are dusty.  Would anyone out there agree with this theory or have a different idea.  I have resolved similar issues on different machines by removing the glass and cleaning the mirrors.  I have not yet done this on this particular machine because it does not look as easy as it would be on most other machines to remove the glass and clean the mirrors.  Any ideas?  Thanks.

     Upgrade to Firmware version 52.200.4 (CPE 11.4) or newer, which provides a solution for this copy quality issue
    http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prod...
    Also, can you provide a sample of the print out.
    Regards,
    affableLJ
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    I am an HP employee!

  • HP 300 MFP M375 Grinding Noise and Strange Copy Quality Issue

    We are having a copy quality problem with one of these units...  The machine will print bands across the page (not in direction of paper travel) of pretty much all 4 colors spaced out by 3 or 4 inches on most of the prints.  If you print a config page, the band is just black and happens on about 90% of the pages.  You might get one or two that don't exhibit the band but most do.  On color prints, you will always get a band, mostly multiples, of the different colors across the page.  Also, we have noticed a strange grinding noise coming from the lower front right side of the machine?  We removed all of the toner cartridges and the turned the printer on and we are still getting the noise so I don't think the print cartridges are related although they are not OEM.  We have replaced the transfer belt, color mis-registration sensor assy, and transfer roller and also replaced the black print cartridge for this issue with no luck.  I have a new set of cartridges coming to me but I still don't think this is the culprit.  Anyone else run across this issue?  It's really strange..

    Same engine as the CM2320 which means it has two motors on the right side and if one of them goes bad it will give the color bars across the paper.  To test just remove the right side cover and swap the motors since they are the same and see if the problem changes.

  • Duplex copying on an 8600

    Where do you find the number that ends in a g or an n that tells you whether your printer will duplex copy and not just duplex print?

    Hi,
    Please watch the following video:
      http://www8.hp.com/h20621/video-gallery/us/en/customer-care/1245168283001/how-to-find-the-model-prod...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

    I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
    Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
    Is it possible to use the AUTO DUPLEX  feature of  the printer with Windows 7   64 bit  operating system.
    All replies welcomed!   Aaron in Calif.

    Hi Aaron,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP LaserJet p4015. Question about pick up rollers

    Is standart warranty cover pick up roller replacement on LJ p4015? Machine has done 116000 pages.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hp laserjet 1300 prints 1 copy even when I select or ask it to print more

    HP laserJet 1300; Windows 7 Home premium 64-bit; printer only prints 1 copy of page/document even when requesting more than 1.

    Hello smarber,
    I have few work-arounds which should resolve the issue ..
    #1 >
    Make sure the printer is ON.
    Unplug the Power Cable from back of the Printer.
    Unplug the USB cable from back of the Printer incase you have the printer connected with USB cable, else ignore this step.
    Wait for 30 seconds.
    Plugin the Power cord to the Printer,and wait until gets back to home screen.
    plug in the USB cable to back of the Printer incase you have the printer connected with USB cable, else ignore this step
    Now Try printing multiple pages.
    #2 >
    Click START > Device and Printer > Add a Printer > Add a local printer >
    ( if the printer is connected with USB )
    Select "Use Existing Port " then Virtual USB from drop down  , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
    OR
    ( if printer is on Network, ) 
    Click START > Device and Printer > Add a Printer > Add a local printer > Select "Create a New Port" > type in the Printer's IP address Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
    Now try printing from lotus and hopefully it should work. 
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Laserjet 1320 - no duplex, print comes out offset, top 4 lines missing

    Hi,
    I have an HP Laserjet 1320 connected to an Ubuntu (Gutsy) server and shared as a SMB printer.
    Printing from Linux or Windows XP works fine: the print is aligned, I get duplex etc.
    When I print from my Macbook Pro running Leopard 10.5.1 I get the following:
    - The print alignment is offset vertically, resulting in the top four lines or so missing from each print (i.e. off the paper).
    - No matter what I sent in the print dialog duplex does not work.
    I have installed the latest driver from the HP site, but that didn't make any difference.
    Any ideas?
    Regards
    D.

    I found this fix for duplex from a 1320;
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c00752270&jumpid=regR1002USEN
    The thrust is that the print option is set intra-application, not at printer level. Say launch word, select print, then click on copies and pages, this gives you the option for 2 sided. You can over type the "standard-1" with text such as "Duplex 2 sided printing", which then defaults to mail etc.

  • HP Laserjet p4015 auto select envelop feeder

    Client machine will not automatically select envelope feeder when printing envelopes.   I have two windows 7 clients using the same driver and same versions of software printing to the same Lazerjet P4015 printer.   One selects automaticly selects the  envelope feeder  and the other client does not.  The envelope feeder is available for manual selection, but the print job is not automatically directed to the envelope feeder like on the other client machine.  I’ve tried reinstalling driver and software with no luck.   Any ideas?
    Both machines are running windows 7 professional (64bt) and office 2013.  

    I initially called HP tech support on this issue, and was told that HP's printer drivers for Mac did not support this feature (even though the hardware was capable of it). Turns out that was BS (and the tech support guy I talked to clearly knew very little about it). HP's network printers have a built-in web server. You log-in by going by going to the IP address using Safari or your preferred browser. You can turn on and set up these options, and more, via the web-server. Easy as pie, once you know what to do.

  • HP LaserJet P3005dn not duplexing after update

    We have a user who, after installing the latest (v. 2.7) HP Printer Drivers, can no longer print to an HP P3005dn printer and use the duplexing feature. The Duplex box is greyed out when they try to select it. Previously they were able to print using the duplex feature of the printer. They are printing to this printer over our LAN.
    Does anyone have any ideas about this?
    Is there a fix for this?
    MacPro OS X 10.6.8

    Sorry you're having problems with your PC.  Since you mention an update I'd recommend starting with a system restore (not recovery) that returns your system to a point in time when it was working properly.
    Click HERE for how to perform a system restore if you need assistance.   If HPSA works after the restore you can attempt to update it again.  Hopefully the update will load and run correctly this time. 
    If a system restore and re-update do not successfully remedy the issue then you may want to uninstall and reinstall the HPSA.  If you need assistance with that let us know here on the forum.
    Thanks for being an HP customer!
    My response is my own and not HP's.
    If this solves your issue please mark "Accept as Solution."
    Click on the white Kudos star to show your appreciation.

  • Scan and Copy Quality - Document feeder

    I have suddenly started to get black vertical lines appearing on any copies or scans that I make using the document feeder - there was no warning and no error messages.  I've tried cleaning the flatbed but that has not made any difference.  Any ideas?
    Best regards

    Welcome to the forums!
    @LynneFlo 
    Please let me know which printer model you have, and I will gladly check out the troubleshooting steps for the issue you're having with seeing vertical black lines on your copies or scans.
    How Do I Find My Model Number?
    In the meantime, try a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly. Test a copy afterwards.
    Hope to hear from you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Color Laserjet CP3525 and duplex printing

    Hi,
    just trying out the 3525 and I have noticed that duplex printing is very misaligned, i.e. the printing on a two page spread has a different top margin on the left and right page. This is real dissapointment, I was really expecting more from an HP device and payed much more just to get the duplex function!
    Is there anything I can do about this?
    Regards
    Goran

    Hi,
    Have you been able to solve the ghost printing problem as I have encountered the same problem & would like to know how to fix it?
    Many thanks

  • LaserJet Pro 500 color printing quality

    Hi,
    Last May, I bought the HP LJ Pro 500 MFP 570n printer and since then I have PQ problem.  When printed, the documents are not as what is on the screen:  B&W pictures are green and white; colour pictures are bland and too dark.
    There is no problem when scanning.
    HP provided me with Level 1 Maintenance, meaning changing yellow cartridge, changing the HV power supply, and changing the Transfer Belt.  Driver has been updated and color calibrated.
    According to Level 2 Maintenance Management, located in Bangalore, India, there is no such PQ issue.

    Color calibration may not be the only way to achieve color match output with a printer (irrespective of drivers or operating system). 
    To actually achieve WYSIWYG (what you see is what you get) (i.e very close color match) you might need to use an additional software/hardware to perform color calibration between the different devices which are involved in creating, editing & printing the particular image or document (like scanner, camera, printer, monitor etc.)
    If you are looking for nearest color match using the product's inbuilt options, then you may print & use RGB & CMYK Samples (use the information menu from device control panel for printing these samples).
    Use the color mix as given in the samples while editing your documents/images.  Also try to  use the other advanced color match options available using the printer driver properties.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

Maybe you are looking for