HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.

HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.
I have frequent Paper Jam errors of this type during duplex jobs. Simplex jobs seem to work fine unless I try to duplex manually by printing on one side and then the other.
When it jams, I will have one page hitting the sensors after the Pre-transfer roller, usually the next blank page from any given tray, and my duplex page, which has gone through one time and has returned for the backpage, folded in underneath or on top of itself after it passes the tranfer roller but before it hits the Fuser rollers.
Sometimes it wil happen every other duplex page or it may allow 5 to 10 before doing it again.
The fuser has been replaced twice, because I thought maybe the first fuser was defective.
I have run the component tests, sensor tests and they appear to be normal.
I need to know where I need to look next.
Right now I am considering changing the feed guide assembly, since that is where the jamming is taking place.
This question was solved.
View Solution.

The feed guide assembly was the culprit.
The main roller connected to the gears was broken, which allowed the smaller gear to come out.

Similar Messages

HP LaserJet p1505n Error: Load Paper msg

I have had no problems with my year and a half old (minimally used) hp 1505n printer until recently. Now, when I click the print icon (on WordPerfect) after the Preparing Document messages flashes on and disappears a large message in a window appears on the right of my screen with a diagram of a printer depicted on it. On top of the window it says: HP LaserJet P1505n Error. In the window near the printer depiction is the message: Load Paper. However, the tray is filled with paper. The printer works if I click the OK in the message and press the print button on the printer.
One technician told me she thinks it because the printer is on Manual Feed rather than Auto Select. But when it is put on Auto Select it always returns to Manual Feed even after clicking OK.
Any solutions?
Stan

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp color laserjet 4700 error 13.30.00 or 13.20.00

hp color laserjet 4700 error 13.30.00 or 13.20.00
this jam occures from casette no 4.
the jamed paper located in the paper path between no 2 and no3 cassette.
how do i fix this ?

Hello tombaman. Please follow this troubleshooting on how to clear the jam, as there are a couple sections relevant to these errors:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=473038&spf_...
If you are still having difficulty removing the paper, or still get the error message, please let me know. I'm only here to help!
Mario
I worked on behalf of HP.

Laserjet P4515 network issue

Hi all,
I've got a Laserjet P4515 that seems to have a dead network card. Both communication LEDs on the LAN port are off, and I can't ping the printer from the network.
I've replaced the formatter, but the problem remains.
The odd thing is that on the configuration page, the printer's IP shows correct, but on the jetdirect menu the IPv4 settings are zero.
Any ideas on what might be causing the problem?
I've inserted the printer, and jetdirect configuration pages
Thanks for reading and replies

Hi,
You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
Find it with the link below.
http://h30499.www3.hp.com/
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet M1522 Error Code 49 + "Memory is Low" Message.

i am having a problem with my HP LaserJet M1522 Error Code 49 + "Memory is Low" Message can anyone tell me how to fix this?

update your firmware download it from hp website
tecnical support for hp printing

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps

Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found

hi,
While running a page using jdeveloper am getting error like
Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found.
am very thankful to the response
Thanks
Surya

Hi,
I faced the same issue.
I fixed it by searching the missing file (In my case MyEO.xml which is a removed file) using JDeveloper (Menu Search/Search Files...).
It found an occurence in the related .jpr file.
In the .jpr, I deleted the related lines:
<Item>
<Key class="java.net.URL" path="xx/oracle/apps/.../MyEO.xml"/>
<Value idref="15"/>
</Item>
That's it.
Regards,
Olivier

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

When logging on to my account a receive this message "the server encountered an error processing registration. Please try again later". This is not a new account. I have changed my password and nothing works. What am I doing wrong.

I'm having trouble logging into facetime. We do not have a new account. I've changed the password and still cannot get in. The message that pops up is "the server encountered an error processing registration. Please try again later." I want to talk to my granddaughter but can't. Can someone help me. Thanks

I had to same problem. I found forums about adding the DNS 8.8.8.8 and 8.8.4.4 in System Preferences - Networks I did that and it still didnt work. Just found another forum saying to go into System Preferences - Time and Date and check the Set time and Date automatically. And it worked for me. Hope it works for you too.

When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

Hi,
As the Other threads suggests I would check the Date and Time settings on the Mac and compare that with the settings in the router.
Messages (and iChat before that) send Time stamped info to Login and to send IMs.
Obviously most people set their Macs to their Time Zone and nearest city/town.
What people sometimes forget is that their Router/Modem device(s) have to be set correctly as well.
EDIT
Also Add a Public DNS server to your System Preferences> Network > Advanced Button > DNS tab
A Google one such as 8.8.4.4 or 8.8.8.8 seem to work well for most people
10:15 PM Saturday; March 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

LaserJet 4L paper feed jams.

As the LaserJet 4L picks up the paper from the paper tray, it jams. It has done this before and I have been able to fix it by opening the drawer and turning the wheel behind the black plastic rectangular thing on the far left and "messing" with the "rubberized" thing just to the right that seems to pick up the paper.
After attempting to fix it, the printer will usually print one page and then jam on the next page.
Love the printer, don't want to put it out to pasture.

Mine was picking up the paper then jamming just as it passed the main feed wheel. Ussually the first page would print but then the second page would stop right as the paper started passing under the smoked plastic sheild on top. Finally fixed it by taking things appart and cleaning the two solenoids that control the feed events. One solenoid controls the D wheel that pickups up the paper - you can see the little metal lever against the D wheel when the paper tray is removed - the other is hidden inside the main roller assembly. Both the solenoids used some type of bumper tape (to stop the metal to metal clicking) that has deteriorated and left a sticky adhesive behind. This sticking is what throws off the timing and causes the jam. This adhesive need to be cleaned off and the machine should run again as new. I've had my 4L for 20 years, and hated to throw it out, it otherwise still prints great and the toner can be had cheap. Just fixed mine and it once again running perfect. Now I'm interested to see just how long I can keep this workhorse going. kudos to the old HP.
I took a bunch of pictures of the disasembly process if anyone is interested. Tricky at first, but only took 5 minutes the second time. (I only found the one solenoid the first time and had to go back in for the second)

XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context

Following is my development environment:
JDeveloper 9i Release Candidate
JDeveloper JVM 1.3.1
Oracle XML Parser v2 9.2.0.0.0
I'm using the Oracle XML Parser V2 9.2.0.0.0 library to apply a stylesheet to an XML document. However when I invoke the call to processor.processXSL() an XSLException is thrown with the following details:
oracle.xml.parser.v2.XSLException: <Line 1, Column 116>: XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context.
exception
Below is the sequence of events:
// Create an instance of XSLProcessor to perform the transformation
XSLProcessor processor = new XSLProcessor();
// create a Reader from a String object that contains the stylesheet text
StringReader r = new StringReader( stylesheet );
// create a new XSL stylesheet, passing it the Reader object reference
XSLStylesheet sheet = processor.newXSLStylesheet(r);
// apply the stylesheet
// the variable sheet represents the XSLStylesheet object
// the variable source represents the XMLDocument object
// this call throws the exception
DocumentFragment df =
processor.processXSL(sheet,source);
I've included the Stylesheet and source XML file I'm processing below.
Note: My application works fine when I use the Oracle XML Parser v2 9.0.1 library. (although I have to use new XSLStylesheet() in place of XSLProcessor.newXSLStylesheet())
Any ideas on what has changed between the two releases? I do have a reproducible test case that I can send on if required?
thanks in advance
private String stylesheet =
"<INSERT xsl:version=\"1.0\" xmlns:xsl=\"http://www.w3.org/1999/XSL/Transform\"> "+
"<xsl:output method=\"xml\" indent=\"yes\"/> "+
"<ROWSET table_name=\"acc_database\"> "+
" <xsl:for-each select=\"DATABASES/DATABASE\"> "+
" <ROW> "+
" <DBID><xsl:value-of select=\"DBID\"/></DBID> "+
" <DBNAME><xsl:value-of select=\"DBNAME\"/></DBNAME> "+
" <DBSIZE><xsl:value-of select=\"DBSIZE\"/></DBSIZE> "+
" <DBPATHNAME><xsl:value-of select=\"DBPATHNAME\"/></DBPATHNAME> "+
" <DBUSER><xsl:value-of select=\"DBUSER\"/></DBUSER> "+
" <DBPASSWORD><xsl:value-of select=\"DBPASSWORD\"/></DBPASSWORD> "+
" <ISAPPDB><xsl:value-of select=\"ISAPPDB\"/></ISAPPDB> "+
" <ISATTACHEDDB><xsl:value-of select=\"ISATTACHEDDB\"/></ISATTACHEDDB> "+
" <CONVERTDB><xsl:value-of select=\"CONVERTDB\"/></CONVERTDB> "+
" <VERSION><xsl:value-of select=\"VERSION\"/></VERSION> "+
" </ROW> "+
" </xsl:for-each> "+
"</ROWSET> "+
"</INSERT>";
<?xml version="1.0" encoding="ISO-8859-1"?>


<DATABASES>
<DATABASE>
<DBID>1</DBID>
<DBNAME>xmltest</DBNAME>
<DBSIZE>1</DBSIZE>
<DBPATHNAME>E:\xmltest.mdb</DBPATHNAME>
<DBUSER>xmltest</DBUSER>
<DBPASSWORD>oracle</DBPASSWORD>
<ISAPPDB>1</ISAPPDB>
<ISATTACHEDDB>0</ISATTACHEDDB>
<CONVERTDB>1</CONVERTDB>
<VERSION>4.0</VERSION>
<TABLES>
<TABLE PRIMARY_KEY="1">
<TBLID>1</TBLID>
<DBID>1</DBID>
<TBLNAME>xsu_test</TBLNAME>
<CNVTABLESTRUCT>1</CNVTABLESTRUCT>
<CNVMOVEDATA>1</CNVMOVEDATA>
<CNVRI>1</CNVRI>
<CNVVALIDATION>1</CNVVALIDATION>
<CNVDEFAULT>1</CNVDEFAULT>
<CNVADDTIMESTAMP>1</CNVADDTIMESTAMP>
<ATTACHTABLEBACKTOACCESS>1</ATTACHTABLEBACKTOACCESS>
<SAVEPASSWORD>0</SAVEPASSWORD>
<CNVMAKEUPDATEABLE>1</CNVMAKEUPDATEABLE>
<RETAINLOCALCOPY>0</RETAINLOCALCOPY>
<SYNCWITHSERVER>1</SYNCWITHSERVER>
<OWNERID>1</OWNERID>
<VALIDATIONTEXT></VALIDATIONTEXT>
<VALIDATIONRULE></VALIDATIONRULE>
<NUMBEROFROWS>1</NUMBEROFROWS>
<CACHINGTABLE>0</CACHINGTABLE>
<DESCRIPTION></DESCRIPTION>
<COLUMNS>
<COLUMN>
<COLID>1</COLID>
<TBLID>1</TBLID>
<COLNAME>id</COLNAME>
<COLTYPE>4</COLTYPE>
<COLTYPEDESC>Long</COLTYPEDESC>
<COLAUTOINCR>1</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>4</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>1</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
<COLUMN>
<COLID>2</COLID>
<TBLID>1</TBLID>
<COLNAME>name</COLNAME>
<COLTYPE>10</COLTYPE>
<COLTYPEDESC>Text</COLTYPEDESC>
<COLAUTOINCR>0</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>50</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>2</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
</COLUMNS>
<INDEXES>
<INDEX>
<INDID>1</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>id</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>0</ISPRIMARY>
<ISUNIQUE>0</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>0</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>1</INDCOLID>
<INDID>1</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
<INDEX>
<INDID>2</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>PK_xsu_test</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>1</ISPRIMARY>
<ISUNIQUE>1</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>1</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>2</INDCOLID>
<INDID>2</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
</INDEXES>
</TABLE>
</TABLES>
<RELATIONS>
</RELATIONS>
</DATABASE>
<ATTACHED_TABLES>
</ATTACHED_TABLES>
</DATABASES>

Your problem is that your stylesheet is illegal.
You're using the "simple form" of the stylesheet which
is equivalent to having a single root template.
If you use the simple form, you cannot use: <xsl:include>,
<xsl:import>, <xsl:output>, <xsl:param>
or any other <xsl:XXX> element which must be at the "top-level"
of the stylesheet.
The solution is to change from:
<INPUT xsl:version="1.0" xmlns:xsl="...">
   <xsl:output>
</INPUT>.
which is illegal to:
<xsl:stylesheet version="1.0" xmlns:xsl="...">
    <xsl:output>
    <xsl:template match="/">
      <INPUT>
      </INPUT>
    </xsl:template>
</xsl:stylesheet>

HT1498 "An error has occurred. Please try again later." i rented a movie and thats all i ve been getting for 5 days now. how do i fix it???

"An error has occurred. Please try again later." i rented a movie and thats all i ve been getting for 5 days now. how do i fix it???

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.

Similar Messages

Maybe you are looking for