HP LaserJet P4515 Printer

Hi ,
     I am facing problem with the P4515 Printer . This Printer is attached to Postmate6 Pressure Sealer Output . The problem with the printer P4515 is that when given 200 printouts 15 pages are with papers . Suppose we give print-out one-by-one , one of the pages is always with blank printout . We tried clearing the cache at that point in time its fine for sometime , but again the problem persists . Current firmware version is V.36.36.FF . Somebody adviced us to update the firmware . Will updating the firmware solve this issue ?

Please describe your problem with the printer.

Similar Messages

  • HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.

    HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.
    I have frequent Paper Jam errors of this type during duplex jobs. Simplex jobs seem to work fine unless I try to duplex manually by printing on one side and then the other.
    When it jams, I will have one page hitting the sensors after the Pre-transfer roller, usually the next blank page from any given tray, and my duplex page, which has gone through one time and has returned for the backpage, folded in underneath or on top of itself after it passes the tranfer roller but before it hits the Fuser rollers.
    Sometimes it wil happen every other duplex page or it may allow 5 to 10 before doing it again.
    The fuser has been replaced twice, because I thought maybe the first fuser was defective.
    I have run the component tests, sensor tests and they appear to be normal.
    I need to know where I need to look next.
    Right now I am considering changing the feed guide assembly, since that is where the jamming is taking place.
    This question was solved.
    View Solution.

    The feed guide assembly was the culprit.
    The main roller connected to the gears was broken, which allowed the smaller gear to come out.

  • Laserjet P4515 network issue

    Hi all,
    I've got a Laserjet P4515 that seems to have a dead network card. Both communication LEDs on the LAN port are off, and I can't ping the printer from the network. 
    I've replaced the formatter, but the problem remains.
    The odd thing is that on the configuration page, the printer's IP shows correct, but on the jetdirect menu the IPv4 settings are zero.
    Any ideas on what might be causing the problem?
    I've inserted the printer, and jetdirect configuration pages
    Thanks for reading and replies

    Hi,
    You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
    Find it with the link below.
    http://h30499.www3.hp.com/
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Enabling the printing function of your HP Laserjet M1005 printer

    If you wonder how to install the printing function of your HP Laserjet M1005 printer, here is listed a bullet list of the actions. This has just been tested out thanks to the Support team from Germany
    Go to the page http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1 839459&lang=en&cc=us&prodTypeId=18972&prodSeriesId=1839458&taskId=135 and select the link Mac OS X; download the link "HP LaserJet M1005 MFP Mac OS X Full Software Solution"
    Use the opportunity to update your printer firmware by selecting the link "Printer Firmware Update"
    Shutdown your Mac and start up in the safe boot mode (should be the combined keyboard shift and power on/off - refer to the Apple web site for details)
    Run the downloaded SW package listed in the step 1
    Go and select under system settings printer and fax, follow the step-by-step instructions to have a printer installed
    Shutdown your Mac and start up again in the safe boot mode
    Connect your printer and the printer SW installation message shoud pop up requesting you to install it
    SW download process should appear and run
    Be aware that just the printing function will be available - no scanning function so far
    For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation.
    Continue to enjoy your HP Laserjet M1005 printer

    "For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation."
    You should read this:
    http://www.reedcorner.net/mmg-antivirus/

  • HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

    HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
    OS: Windows 7 Ultimate x64
    Browser: Google Chrome 15
    HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
    Printer is connected by WiFi to 4 computers

    Hi AbZu, 
    You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
    http://support.google.com/chrome/?hl=en
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP LaserJet 4300 prints gibberish for one user, but prints OK for all others on a Windows 7 32-bit

    HP LaserJet 4300 printer installed via LPT1 using Universal Print Driver v5.2.6.9321 on an HP 8100 desktop running Windows 7 Enterprise SP1 32-bit.
    For one particular user, this printer prints gibberish no matter what type of document she attempts to print.
    Not sure when the problem began, the user uses a network printer to work around this issue. She can print to any of the other HP printers on our network OK, including another 4300 down the hall.
    Anyone else can log on and print the same documents OK on this desktop using this printer.
    Have tried rebooting the HP 8100 and power cycled off/on the 4300. Also uninstalled and re-installed the 4300.
    I have updated the firmware on this 4300.
    Changing the print processor in the printer properties did not help either.
    Virus and malware scans have not detected any issues.
    Any advice for this issue would be greatly appreciated.
    This question was solved.
    View Solution.

    Hi MDOTd5-247,
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Printing problem with HP Color Laserjet 3000 printer

    I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6  with SPAD with device type "HPLJ4    : HP Laserjet 4 series PCL” and access method = “L: Print Locally Using LP”
    At HPUX level printer in configured with proper driver also.
    When I print from SAP, I get following error
    "Invalid option, Please refer to MAN page for valid options" as attached
    Other then above line , nothing else comes
    Please help,
    Al Mamun

    Hi,
    Make a try using the device type HKSAPWIN and the access method is front end prinitng.
    Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
    Regards,
    Vamshi.

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I determine how many pages my Laserjet 1020 printer has printed in its lifetime?

    I am trying to be proactive in determining whether I need to plan to replace my Laserjet 1020 printer.  I know that I have seen printouts from resellers/refurbishers which show the number of pages that a printer has printed in its lifetime.  I am just trying to figure out how to get this information from my printer so that I can see how much life it has left.  Can anyone tell me how to generate this report?
    Thanks!!
    This question was solved.
    View Solution.

    Hi davesuff, 
    You should be able to view the pages printed by going into the driver. Let me know if this works?
    1. Printing Preferences
    2. Basics tab 
    3. click on About.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HT1338 i can't attach my hp color laserjet cp1215 printer.

    i can't attach my hp color laserjet cp1215 printer.

    Adhvaresh,
    "attach" is a word we usually use for plugging in cables - but I don't think that is what you mean.
    If you want a driver for that model laserjet, I suggest you use the foo2hp set of drivers. Install Foomatic and ghostscript from here:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
    Then, install foo2HP from:
    http://foo2hp.rkkda.com/

  • HP Color LaserJet 1600 Printer

    I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts.
    I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked RFU to ON position and installed the firmware. Added HP Color LaserJet 1600 Printer via USB, as required and my MacBook correctly identifies it as such. Though the driver I have chosen is HP Color LaserJet 2605 since the one for 1600 is not available in the database. The printer responds positively during the upgrade but later does not print. I can see the print command being transmitted to the printer but it stays dead.
    Please help and let me know stepwise how to do it correctly.

    Just upgraded my printer to HP Color LaserJet Pro 200 M251nw.... Problem solved.

  • Cheque Printing using HP LaserJet P3005n printer

    Hi To All,
    We have problem in cheque printing. There is a output but the words are missed aline. The device type is HP Laserjet 4 PCL-5 and O.S. is AIX 5.3. Before it is running OK with HP Laserjet 4 printer model. Is this a driver issue in O.S. side? I cannot find suitable driver for this new printer that is suitable in AIX.
    Thank you in advance.
    Naithan

    Hi Naithan,
    If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
    Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
    Regards,
    Anil

  • Unable to add HP Laserjet 4250 printer to my network

    I've obtained an HP LaserJet 4250 printer to add to my home network. Plugged in the network cable, came up as an option on my "add printer" list. Clicked, was recognized, added to menu. When I try to print, item hangs in the print que and nothing happens. Printing out settings page from the printer, it appears the printer has an IP address not on my network! How to change the address. BTW, how do I find a list of IP addresses assigned by by Airport Extreme? It no longer seems to be an option in Airport Utility (v6.2)!
    Using Mountain Lion (OS 10.8.3), iMac, Airport Extreme/Time Machine connected to Netgear ProSafe Gigabit switch.

    Download the latest Driver and install it could solve the problem.
    http://support.apple.com/kb/DL907

  • Resetting or Moving a HP LaserJet P1102W printer

    Moving or Relocating an HP Laserjet P1102w printer, resetting the wireless to defaults
    things you need...
    a. Smart Start software from HP (may not need)
    b. usb cord for connectivity to printer
    c.  some time
    steps....
    1.  Reset the Printers wireless by unplugging the printer and hold down the Wireless and Cancel keys together and plug the printer back in.
    2.  Hold down for about 5 seconds after power then release, this setup the wireless part for DHCP.
    3.  uninstall the printer software from your PC or Laptop, if you have other HP products be careful with this part.
    4.  Reboot your PC or Laptop.
    5.  plug printer via usb which will start the installation wizard.
    6.  follow prompts.
    7.  make sure you choose "install software for wireless network" or something to that affect.  This will start the Network install using the USB.
    8.  The wizard will let you know when to disconnect the USB.
    9.  The wizard will walk you through the wireless setup while using the usb when finished it will ask you to disconnect the USB.
    10. follow the on screen prompts and printing the test page and you should be good to go.
    for this issue i was moving the printer from one wireless network to another.  I was trying to find some documentation, but could not find anything that was straight forward.  Hope this helps.

    Thanks for sharing that valuable information Rogerr777 .
    I did come across one document with different ways for setting up the printer over the wireless network, that you might want to take a look at also for future reference.
    Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Adjust density on HP Laserjet P2015dn printer

    Hello,
    I use HP Laserjet P2015dn printer with Windows 7 Ultimate. I would like to ask you how to adjust the density of printing. I couldn't find any similar option in the printer's properties.
    Thanks.

    Stasko,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for