Hp laserjet printer p11o2w attention light in on continously

the attention light on my laserjet printer p1102w is on continouly (there is nopaper blockage) and the printer will not print. The printer is 2 years old.

Hi @flur ,
I see by your post that the attention light is continuously on and you unable to print anything. I can help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
You can find the blinking light pattern in this document and the solutions appropriate to the pattern you are experiencing. Blinking Lights on the HP LaserJet Pro P1102, P1102w, P1106, and P1108 Printers.
Reseat the toner and remove the paper from the paper tray and reseat the paper again.
Remove the USB cable temporarily and try and print a hardware self test on the printer. If using a USB connection.
Were you able to print the test page, or is the attention light still on?
When you turn the printer on or open the top cover, does the printer make a noise?
Are you using Genuine HP Toner?
What are the toner levels?
How is the printer connected? (USB/Wireless)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Color Laserjet 3550 - the "attention" light won't turn off

I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off. It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in. It was a real easy fix, I pulled the page out and now the "attention" light won't turn off. So I can use the printer at all. I've had this printer about a year. I purchased it used. I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router. I've opened up the printer and removed the casing (the plastic apparatus on the door) and replaced it. The router is a 2Wire HomePortal 1800HG. I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix. Now a simple stick like this and the light just wont' go off.

ShlomiL wrote:
HI Vern,
Where did you bought the printer? may you bought it from a different region than your current one?
What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
I bought the printyer in the US and the cartridges also came from the US, probably no the same state. Cartdridge # 97, black # 96. I don't see a product number. This is the same # that was in the printer before and the same one I always used. As soon as I pull it out the light goes out, and on again as soon as I install it. This is before the printer even cycles through it's "new cartdridge" routine, if you know what I mean.
thanks for the reply

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Hp laserjet p1006 no indicator lights. printer powers on but no lights. it will not print.

hp laserjet p1006 no indicator lights. printer powers on but no lights. it will not print.

Please refer to this document regarding the no lights issue. There are several solutions that might fix your issue.
The Printer will not turn on or respond
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP F2480 - attention light and On are blinking fast. The printer works fine but scanner is dead.

The On and Attention lights are blinking fast. The printer works fine but cannot connect to the scanner. I'm on Mac OS and when trying to open the scanner I get an: Failed to Open session on the device.

Hi,
These units indicate error messages by combination of blinking light. SO most likely has nothing to do withpanel cables and stuff. The pattern you are recieving indicates a scanner failure. Check HERE for a page with the differant blinking patterns and for possible solutions.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP Laserjet p1102w blue WIRELESS light keeps blinking and computer is not able to locate the printer

Have been using the printer on wireless and it was working fine until I had to cancel a print and might have accidentally press wireless button and "X" cancel button together and havn't been able to print since.
Did everything:
- update firmware: LJP1100_P1560_P1600_FW_Update.dmg
- update printing software: HP-ePrint_v2.4.1.dmg
- Reinstall wireless setting
But the printer will now shot from Add new printer- Bonjour setting.
The odd thing is When I switch the wifi on computer on and off the printer will show in Add new printer- Bonjour setting, for a second and disappear again.
The printer still works via cable.
There were 3 machine using the printer via wireless now has all same issue.
Thank you for any help or tip!

Hello eeoorhee,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer over the wireless connection.
I have a few steps that we can take to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you do an uinstall of the software and drivers and reinstall. Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

F380 ALL-IN-ONE printer , All indicator lights are on.

i own an f380 printer, and for some reason all the indicator lights are just on (not blinking).
as soon as i switch the power on this happens. please help!

Hello snodgrassium,
I see that this is your first visit with us here on the HP Forums. Please let me take a moment to say "Welcome"
I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having an issue with the light on the printer staying on solid. One thing that you can try is to make sure you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general.
Please click on the link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once you have the power cable in a wall outlet, power cycle the printer with the use of the ON/OFF button.
If you are still having issue or if you have any other questions, please feel free to write me back.
Hope you have a great Tuesday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP laserjet printer P1102W not allowing to connect to mac OS 10.8

i recently purchased an HP laserjet printer P1102W and am having issues connecting to my mountain lion macbook pro. any suggestions?

I had a very difficult time getting the P1102W working wirelessly on a macbook pro with Mountain Lion, however I finally got it to work after countless hours of troubleshooting. I was able to successfully connect the printer to my wireless network WITHOUT having to perform an Ad Hoc wireless first as HP suggests in their support forums.
Here are the steps as accurately as I can remember:
1) Turn the printer off
2) Press and hold both the wireless and the cancel button, and then turn the product on
3) Hold the buttons until all the lights blink in unison, and then release the buttons.
4) Connect printer using USB cable & power on.
5) Check for apple software update from the App store. It will find and install an update for HP printers
6) Download and install the full software from HP, including the firmware update. here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80684-8 &cc=us&dlc=en&lc=en&os=219&product=4110396&sw_lang=
7) Open System Presferences in Mounatin Lion, select Print & Scan.
8) Make sure the P1102W printer is selected and Open Print Queue
9) Click Settings, then click Utility, then Open Printer Utility
10) Select Configuration page. This will bring up Safari and displays the printer's settings and this is where you can change the configuration.
From this point, whenever I made changes to the netowrking configuration using Safari and clicked Apply, the changes would not "stick", no matter how many times I tried. So, I thought it may be an incompatability with Safari, and sure enough it was. I downloaded Google's Chrome browser, pasted http://localhost:5050/SSI/Auth/ip_direct_print.htm into the address bar and hit return on the keyboard. The changes I made using Chrome applied successfully and I connected to my home's wireless.
Specifically:
11) Paste http://localhost:5050/SSI/Auth/ip_direct_print.htm into Chrome and hit return on the keyboard. It will load the printer Config page.
12) You may already be under Wireless Direct Setup, if not, select Networking, then Wireless Direct Setup.
13) Select your network name, use the << button to move it over to the other window.
14) For Authentication, selecte watever your network uses (propably WPA2) and enter password. Apply.
You will see the Blue light on the top of the printer turn on, flash and then go solid.
15) Disconnect the USB cable
You can now print wirelessly from your Mac, ipad or iphone running IOS5 or 6.
I hope that helps compensate for HP's lack of support using Mountain Lion.

How do you get the page count on an old hp 1012 laserjet printer?

How do you get the page count on an old hp 1012 laserjet printer?

You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
You can find more information in this document: Identifying Page Count.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

Hp office jet 5740 prints copies too light

Hi I just purchased a HP office jet 5740 and have it set up. When I print a color copy
it comes out very light compared to the original. This happens when printing without being
connected to the computer. Is there any was to adjust this?

Hello gloworm2,
Welcome to the HP Forums.
I see that you are having an issue with the printed photo being lighter than the original.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you run through the following document that deals with Fixing Print Quality Problems for the HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-On...
Please feel free to write me back if you have any other questions.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print a PO from a HP laserJet printer.

Hello All,
Could you please help me in finding out the solution for below issue.
" We have a requirement to print a PO from a HP laserJet printer. This has to come in Landscape. For that we have copied a device type HPLJ4 and a formato type as Z_LEGAL. We are un sure how to maintain the device type. Like the entried added for Printer Initialization, Reset after Exit, End of page, End of line etc. Who is supposed to maintain the same. Is it ABAP or who?. Is there any note to know how to maintain the format type and can we raise a ticket with SAP to provide the same.
Thanks,
Nikhil
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 7, 2009 2:57 PM

Thanks.

Cleaning the guts of an HP B & W or Color LaserJet Printer

Hi:
I currently have an HP4M LaserJet printer...it appears to have "died" after 20 years.
I have had to do meticulous internal cleaning of it in the past, when I toner cartridge would go bad, dumping toner into the printer. With brushes, lint free cloths, etc, you could clean the inside of the printer, after removing a few items; e.g., the paper feed roller mechanisms, the fuse roller, etc. The 4M's HP User's Manual showed how to do this. If you take time to do it properly, ...and this usually requires several hours to do...you will end up with crisp clean printouts...no excess toner-speckling on the printouts.
I am considering replacing the 4M with one of the following HP Laser Printers.
HP LaserJet Pro P1102w Printer (B & W)
HP LaserJet Pro P1606dn Printer (B & W)
HP LaserJet Pro 400 M401n Printer (B & W)
HP LaserJet Pro 400 M401dne Printer (B & W)
HP laserJet Pro 200 color Printer M251nw (Color)
Am I correct that B & W is not striclty Black or White but also includes Gray-Scale like the 4M did ?
The P1102 appears to have the same (or similar) toner cartridge mechanism that the 4M did.
When you rermove it, you can see the gear mechanisms, etc....not yet sure about the fuse roller.
The Pro 400 printers look very much like the 4M externally, but I do not yet know about the internals.
The M251nw is a different animal.
It has a metal slide-out tray that holds 4 toner cartridges which appear to be "rectanglular" in shape.
Can this tray be removed by the user (for cleaning) if a cartridge dumps toner into the printer ?
Is the fuse roller accessible to the user for removal and cleaning ?
I have looked through the M251's User Manual, and this level of cleaning is not covered.
It only covers "cleaning" like an inkjet does for cleaning the printheads.
Somehow, I would think that the user should have access to the guts of the printer,
since a Tech Support person would also have to disassemble the printer for cleaning.
if this information exist, where do I find it ?
Thank you
DaleBr

Colors are great because they provide you with color. But the cost of ownership is a lot higher because now you have 4 color toner cartridges. With the cost of toner cartridges hovering around US$130 each, you are looking at a cost of at least $520 in toner replacement costs. Granted you won't be using all the toner across the whole page but if you print photos or images, it will deplete quickly. Plus with 4 toner cartridges inside, the cartridges are fairly small.
Cost per prints for black and white hovers around 1 to 4 cents per copy. Color prints cost around 8 to 17 cents per copy. But I read somewhere from someone worker for a company selling the toner it can cost up to 30 to 75 cents per copy for a full page of color.
So in a nutshell, it's very expensive to have color.

LaserJet printer no longer works after installing Snow Leopard

Since installing Snow Leopard, my LaserJet printer no longer works. Spent 5 hours on the phone to Apple Support without any satisfaction. Any suggestions? I'm desperate.......

Go to the HP web site and download the latest drivers for your OfficeJet.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919449#N225

A HP4350TN Laserjet Printer and when i tried to get the software, I can't download it from your

I tried 4 times to download this software for the HP 4350 TN laserjet printer and it says Incomplete download and comes within 2 or 3 seconds of the complete download and it will not finish it. It does it for EVERY Program on this page under this printer. When you try to finish the download, it will tell you that it can't download this program. WHY, I need the printer drivers for my new printer!!

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Hp laserjet printer p11o2w attention light in on continousl​y

Similar Messages

Maybe you are looking for

Hp laserjet printer p11o2w attention light in on continously