HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??

    Can the LaserJet Pro 100 Color MFP M175nw  print envelops in c5??
    Thank you

    Hi,
    Which application are you using ? Under Word, you can check it yourself using Print Envelopes as shown:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

    Hello! I have a 
    HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
    Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
    I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
    Please help me.
    Thanks!

    Hi Tolick,
    Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
    Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address?  If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
    If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you. 
    HP ePrint Software User Guide
    Getting the Printer Claim Code
    Setting Up a Custom Email Address for ePrint
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP LaserJet Pro 100 color MFP M175nw unable to communicate with product

    Hi guys,
    I've had a HP LaserJet Pro 100 color MFP M175nw for 12months now and it has worked great over my wireless network. I recently upgraded from router from a 5 year old single band router to a late model dualband wireless N router.
    Since i did this my HP LaserJet Pro 100 color MFP M175nw was unable to reconnect to my new network.
    I have uninstalled the drivers and have tried reinstalling the drivers but each time (after I select Connect the Product/Coonect through wireless network, have tried both Yes retrieve the wirelss settings on my computer and No I will enter the wirelss settings manually) but no matter which I select the printer is installed successfully but then gets stuck at 15% and says cannont communicate with the product.
    I have disabled my firewall during the installation and have only used the USB cable when the installation has asked me to do so.
    The printer is visible in control panel but each time I do a test print or send something to the printer in the sys tray the print job is shown but nothing ever happens.
    The installation will work fine if I install it via the directly connect to the computer using USB option.
    If I do a test print fromt he printer itself by going into the network setting, network test it prints a page that says:
    Wireless On Pass
    Wirelss Working Pass
    Network Name SSID Found Fail
    Security Fail
    Your HP printer cannot find your wirelss router. The WPA authentification method on your HP has changed fromt he default setting.
    Is there anyway I can edit the SSID network name and password without having to do this install process?
    This is really frustrating. Just spent 3 hours with HP support which got me know where (they were reading the script the supplied me) and then when I rebooted and went to go back to online chat support the website tells me their support is only available during business hours!
    Any help would be great

    OK time to back up totally.   I need to make sure you are following the instructions in the user guide to install this printer.  Please start from scratch by uninstalling all software from your computer and outline every step to make sure it is correct. 
    You have to use the USB cable to set up the wireless connection. 
    Go here for the User Guide and all installation info.  Get your drivers and troubleshooting info here too.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5076465
    The reason we have to start over is that you started the software installation when you changed your router.  You don't have to do this, but now we do. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network

    I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2)
    I need to connect the printer to the new wireless network router. However, neither the control panel nor blue wireless connection button provide any way for me to do this. The manual has not walked through a way to do this. 
    There really needs to be a simple, no-nonsense way to just connect the printer to the wireless network. How do I connect this printer to a new wireless network?

    Hi @shakayumi ,
    I see that you are having issues configuring the printer on the new router. I would like to help.
    Restore the printer's network defaults.
    Touch the Setup button. (wrench)
    Select Network Setup Menu.
    Then select Restore Defaults.
    Print out a configuration report to make sure the IP address is 0.0.0.0 and the SSID is cleared.
    Printing a Configuration Report.
    Here are the directions for setting up the printer through the Wireless Direct to configure the printer over the network as Infrastructure.
    Turn the Wireless Direct on the printer.
    On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
    On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
    This will load the embedded web server for the printer.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Click on the wireless icon and connect back to your network name.
    Print out a configuration report to make sure the IP address is valid. (192... or 10....)
    Now create a new port, this will save you the time, instead of uninstalling and reinstalling the software.
    Go to Start, Devices and Printers, right click the printer, go to Printer Properties, select the Ports tab.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    If you are still having issues, then try this method:
    If you have a Ethernet cable, connect it from the printer to the router.
    Wait about a minute, print the configuration page to see if you get a IP address.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Then disconnect the Ethernet cable.
    Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    If the printer is back on the network, create a new port. Steps are listed above.
    Make sure the printer is online.
    Try and print now.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet Pro 100 Color MFP M175nw installation issue

    Hello,
    I have a problem installing my HP Laserjet Pro 100 Color MFP M175nw wirelessly. Back in time when I first installed it, it took me a few installations, but suddenly it was installed. Now after a lot of tries, I still get stuck at the part where the USB cable have to be used to pass the network details to the printer. It get stuck at 15% and after a while it gives the error that I have to connect my printer, although it is plugged and the installation initially continued.
    When I put my cable, Win7 is also itself installing the printer, can that be the issue?
    Thanks in advance for your help!
    Ewout

    Hello Ewout,
     I would suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    An HP representative has greater resources and will be able to look to see if the system has any hardware issues.
    Thanks again for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP LaserJet Pro 100 color MFP M175nw error

    i have HP LaserJet Pro 100 color MFP M175nw installed on print server.
    sometimes if the printer restart the hostname will back to default hostname setting and need to reconfigure again.
    if anyone has ever experienced something similar? or could help for this problem?

    Hi tehdjie
    I am not completely familiar with his server, this is the consumer support.
    I would recommend an uninstall/reinstall of the full feature software for 2003  and a firmware update for the printer. I included the link for the software and the firmware update.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=1005&lc=en&cc=us&dlc=en&sw_lang=&product=5076...
    I would post this issue on the business forum for more assistance.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet pro 100 color mfp m175nw auto power

    does anyone know how to set up the hp laserjet pro 100 color mfp m175nw so that it will turn on after a power failure

    Hi,
    I afraid it is not possible.
    After a power failure you will have to manually turn on the device again.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • LaserJet Pro 100 color MFP M175nw

    I am trying to load the driver for my LaserJet Pro 100 color MFP M175nw on my new laptop. It is very slow and after about 10 minutes times out at 99% and says it is a fatal error. I have restarted the PC several times and always with the same result. It loaded on to my old Windows 7 PC immediately. This new PC is WIndows 8.1 64 bit and that is what I chose when beginning the download.
    HELP!!!!!

    Maybe this will help you out: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02266980&tmp_task=solveCategory&cc=us&dlc=en&la...

  • Print in Black ink only - HP LaserJet Pro 100 color MFP M175nw

    Hi, I have a HP LaserJet Pro 100 color MFP and use Mac OSX.  How do I print in black ink only?  I want to turn the colour ink off . . . I'd greatly appreciate any help.  Thanks in advance!

    Hello @Bob_Loblaw ,
    Welcome to the HP forum.
    I understand that you want to print in grey scale. I would like to help you with this.
    I found some instructions on Cnet. How to print in grayscale in OS X.
    There is also a short video on YouTube. Print Black and White on a Mac
    Hope you find these helpful.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Problem downloading software for HP Laserjet Pro 100 Color mfp m175nw

    The window xp computer recognizes the hp laserject pro 100, but I can not install the software.  I tried using the CD, the hp smart intall and installing it from the website.  Nothing works.  When it says printer found and it reads this my take a few minutes, it is still on 0% and it has been days.  We need the software so we can scan.  Thanks for the help

    Ok, I have a few questions:
    1. Do you have Administrative rights on the computer? If so, try right clicking on the installation and choose to run it as administrator.
    2. Was the printer, or any other HP printer, previously installed on this computer?
    3. How is the printer connected to the computer (wifi, usb, ethernet)?
    4. Have you tried to install any other software recently?
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

    Hi 
    I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
    Please help!

    Hi rachelwallace,
    Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
    You could restore the printer's defaults and try one more time.
    Restore the printer's network defaults.
    Touch the Setup button. (wrench)
    Select Network Setup Menu.
    Then select Restore Defaults.
    Print out a configuration report to make sure the IP address is 0.0.0.0.
    Try the previous steps for setting up the Adhoc to Infrastructure connection.
    If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
    Wait about a minute, print the configuration page to see if you get a IP address.
    Printing a Configuration Report.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Then disconnect the Ethernet cable.
    Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
    Since the software is already installed, all you have to do now is add the printer on the Mac.
    Click the Apple icon ( ), and then click System Preferences.
    Click on Print and Scan.
    Click on the + sign.
    Highlight the printer in the list.
    Click on the add button.
    Test the printer.
    In case you don't have a Ethernet cable you may try the wireless direct setup.
    On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
    On the Mac, click on the Airport and select the printer from the list to connect to.
    Then open Safari and type in the IP address for the wireless direct  (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
    This will load the embedded web server for the printer.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
    Apply settings.
    Click on the Airport and connect back to your network name.
    Print out a configuration report to make sure the IP address is valid. (192... or 10....)
    Then add the printer on the Mac.
    Test the printer.
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Wireless Configuration won't open (HP Laserjet Pro 100 color MFP M175nw)

    I'm trying to hook up my printer to my network. In opening the Device Toolbox, going into Networking, and then wireless configuraton, I get a pop up that says: Error: Unable to display that webage. Some network related settings are not assessible through USB connection. If you need to access these settings, connect the printer to the network, then open HP Device Toolbox again.
    This is a huge pain. I can't run CDs on this computer. I can't figure out how to hook the printer up to Wifi.
    Any suggestions?

    I'm trying to hook up my printer to my network. In opening the Device Toolbox, going into Networking, and then wireless configuraton, I get a pop up that says: Error: Unable to display that webage. Some network related settings are not assessible through USB connection. If you need to access these settings, connect the printer to the network, then open HP Device Toolbox again.
    This is a huge pain. I can't run CDs on this computer. I can't figure out how to hook the printer up to Wifi.
    Any suggestions?

  • Low memory on HP LaserJet Pro 100 color MFP M175nw

    My printer keeps telling me, low on memory, printjob cancelled.
    I have already installed the latest software version, that wasnt the solution. Cant find anything on the web about low memory for my printer or how to solve it.

    Hi , I understand that you are getting a low memory while trying to print. I would really like to be able to help you resolve this issue.
    I have been seeing this lately and have included a couple of fixes for this issue. I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation. Test the printer. If you are still having issues, continue the steps below: Reset the Printing System on the Mac and readd the printer back in again, make sure you select the printer and not the Apple preinstalled driver. Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. Try printing again. From what I have seen so far, the printer is not getting the "Low Memory" error when it is connected by a USB cable.
    That would lead me to believe that it might be a communication issue over the network. Print a Configuration Page to get the printer's IPv4 address. For networked printers:
    Delete the printer from Printers and Scanners.
    Click on the + button, select the IP Protocol across the top, type in the printer's IPv4 address, select Jet Direct below and then Apply. You would have to scan though, through the Bonjour driver added.Test the printer again. If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.

  • HP Laserjet Pro 100 Color MFP M175nw

    I am not able to get it started with e print or scanning... any suggestions?

    Hi there tinemor;
    What is the operating system that your system utilizes?
    Use this example as a guide Windows 7 home premium 64 bits.
    The reason we ask your Operating system in all post in due to the fact that I want provide you with detailed suggestion and in other to accomplish some of the instructions that we will provide are operating system dependent or different in different versions of the OS, in short words if you want me to guide thru the process I will need the operating system, the version and the intructiosn width (32 or 64 bits)
    Ok you can try this article
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/START-HERE-How-To-amp-Troubleshooting-informat...
    Let me know the outcome and  provide the information requested and I will do my best to help you.
    Hope this helps;
    RobertoR

    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for

  • Do 'temporary' EJB exist to avoid writing database?

              Hello, I have a kind of entity EJB which has short-life (it is created, stored           in the database for 5 minutes, and then deleted).           Furthermore, the persistence of this EJB is not important (in case of system crash         

  • ITunes dosen´t work

    No se qué pasa con iTunes, me sale un mensaje diciendo que falta el archivo: MSVCR80.dll  "intente reinstalar el programa para corregir este problema" Ya lo reinstalé dos veces y sigue aparaciendo el mismo mensaje. Qué debo hacer???? Translation What

  • Need Help with gift cards

    Hello, I have been trying to print a gift card from the itunes store. But when I do, the following message occurs "This account is not eligable to print an itunes gift card" How can I fix that? And I have heard there is a way to pay for an itunes gif

  • Ipod showing up with incorrect name

    I just plugged in my iPod (after using it for months with no problem) and suddenly the iPod is showing the wrong name. It should show up with the name I gave it obviously, but suddenly it shows up as a network share name that my company has. It also

  • SMARRITO CS6 E ACROBAT XI

    REINSTALLANDO IL SO DEL MIO MAC HO CANCELLATO CS6 E ACROBAT PRO XI, LI ACQUISTATI CON IL DOWNLOAD, MA MI SONO ACCORTO CHE NON SONO PRESENTI NEL MIO ACCOUNT ADOBE, TRA L'ALTRO HO CANCELLATO ANCHE LE MAIL CON I CODICI DI ATTIVAZIONE, MI SONO RIMASTE LA