HP laserjet pro 1102w printer problem

When I have sent print order wirelessly, only the first page of the doc is printed and the printer gives error status, How can I solve this problem. Thanks

Thank you very much for your reply,
I have tried powering down the printer and the computer for a short period of time and attempting to print again?
the problem repeated.
I have tried also the HP PSdr, but no error found by it.
I am printing from an ACER laptop, using windows 7. the document is in PDF format.
I would be very grateful if you please try to solve this problem; (only the first page of the doc. is printed then the printer gives error status.)

Similar Messages

HP LaserJet Pro 400 Printer M401a (CF270A) is not printing complete statement on letterhead

Dear
i have supplied printer HP LaserJet Pro 400 Printer M401a (CF270A)Qty 10 to my customer but its not printing complete statement there is missing ink in the words and also spots are coming on the page.
the page is letterhead of the company.
could you please advise what will be reason.
Waiting for your reply.
Regards
Faisal Farooq

VII,
This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP LASERJET PRO 400 PRINTER M401DNE CF399A drum

I m waiting to receive my new HP LASERJET PRO 400 PRINTER M401DNE CF399A in a few days. I m searching for the suplies may need in future for my printer and i couldn t find any printer drum for this model. Please help me about my issue.

The toner cartridges contain the drum, when you get a new toner cartridge you are getting the self contained drum as well. You can find supplies on the HP SureSupply site.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10).
I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection)
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02847467#N2251
All I get under printers is the USB kind and NOT the Wireless/Bonjour kind.
Can anyone help me out?
Thanks.

Hi @Random_Pelican ,
I see that you are having issues setting up the printer on 10.10. I would like to help you out today.
If the printer has a valid IPv4 address and you still can't add the printer as a Bonjour printer, most likely Multicasting is turned off on the router, since your not able to add the printer as a bonjour device and the other devices won't recognize the printer. Just call the router company and have them turn it on.
If the printer doesn't have a valid IPv4 address please try these steps:
Reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page.
Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
I will provide the steps for 10.9, which should work the same for 10.10.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
Laserjet P1102w.
You may follow the steps instead of watching the video.
You have to connect the USB cable from the printer to the computer to install the printer as a USB device first and then configure the wireless network.
Turn the printer on, connect the USB cable and install the Apple Update that should automatically load.
Then go to the Apple, System Preferences, Printers and Scanners.
Highlight the Laserjet on the left side of the window.
Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button.
The Embedded Web Server for the printer will open.
Click on the Networking tab, select Wireless on the left side.
Fill out this information for your network. Status make sure you select Enabled.
Apply the settings.
Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
Delete the USB printer from the list from the Printers and Scanners window.
Disconnect the USB cable.
Test the printer.
Let me know how you make out.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro P1102w Printer - Firmware Upgrade

In her apartment, my elderly mother has an HP LaserJet Pro P1102w printer, that I set up for her.
It’s hooked up, via WiFi, to her Router that's attached to her Cable Modem.
She doesn't have her own PC. She has only the printer.
When the printer was first purchased, I brought the printer and my Windows XP laptop to her home and installed the printer there.
I email documents to her printer's HP ePrint email address, and I also print web pages to the printer using Google Cloud Print. I do this from my own home, to send her information from the Internet.
An email was received today, saying the following:
"A free firmware upgrade is required to keep your ePrint and associated Print Apps service working. Please go to www.hp.com/go/eprint, download the newest firmware, and continue using your ePrint solution. If you do not complete the upgrade, your ePrint and Print Apps may not work after Hewlett-Packard has finished a service upgrade on 08/07/2013.
Devices requiring the free firmware upgrade are as follows:
HP LaserJet Pro P1100 Series (model HP LaserJet Pro P1102w)”
Is there any way for me to use my Windows XP laptop, to connect to the printer, remotely over the Internet, via the printer's HP ePrint email address, or via the HP Connected account, or in any other way,
and initiate the printer’s firmware upgrade, without leaving my home?
Thank you.

Hi, the short answer is no.
Read the "How to Install" at this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP LaserJet Pro P1606dn Printer constantly goes offline

We have a HP LaserJet Pro P1606dn Printer. We initally put this on our print server. But almost immediately it goes offline. Current settings:
Jam Recovery: Auto Auto Continue: On IO Timeout: 1800 Auto Off: Disabled
Since it was so problematic - we took it off the printer server and are allowing access via IP (not going through our prit server) and it is behaving the same way.
Has anyone else seen this? Any suggestions?

Hi @Halan ,
I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
What is the distance of the printer and the Laptop when the printer goes offline?
Try these steps to see if it will resolve the issue.
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro p1102w printer

Dear,
I want to bye a hp laserjet pro p1102w printer, for my business.
I am a Graphic Designer and I want to print Paper as well as Tracing (for Screen Printings)
It is Posiible ?
Thanks
Ketan

Hi, the short answer is no.
Read the "How to Install" at this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

LaserJet Pro P1102w Printer

I have a HP LaserJet Pro P1102w Printer
Model: CE657A
Serial [Edited for Personal Information]
purchased Staples 10/13/13
It worked until yesterday when my ISP replaced my modem
It is connected wirelessly and now it doesn't work at all, and when I look in Control Panel, I don't see any printer
How can I get this to work again?

Hi @NYCJudy,
I understand that you had the modem replaced and now the printer isn't working over the wireless network. I can help you with this but I will need some more information to provide the proper steps, depending on what operating system you are using.
We will need to restore the defaults on the printer and then configure the printer over the network again.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How much inrush current on HP LaserJet Pro P1102 Printer ?

I have an HP LaserJet Pro P1102 Printer. I want to connect it with the UPS (or maybe power generator). To calculate the rated power of UPS, I would like to know how much the inrush current of this printer model.

Hi gade1234,
Welcome to the HP Forums.
I see that you would like to know the specifications of the printer's power.
I can provide you with the specifications of the printer.
Here are the specifications of the Laserjet P1102.
HP LaserJet Pro P1102 Printer Series Product Specifications
Select Power specifications.
I have also provided the manual for additional information.
LASERJET PROFESSIONAL P1100 Printer series User Guide.
Hope this helps.
Have a great day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?

Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?
Thank you for your help.
James Adrian
{Personal Information Removed}

Hello happy321,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Laserjet Pro 400 Printer unable to print docs using both letter and legal paper

HELP!! Have been using an HP Laserjet Pro 400 M425dn dual tray printer for 2 years, along with a Dell laptop. Always had ability to send documents to print using both letter and legal size paper. Under print set-up on laptop, the option checked was always set to "Choose Paper Source by PDF Paper Size". Now I've just purchased an HP Envy All-in-One Desktop, which does not offer that option under Print Set-Up. While it allows for 'Auto Selection' of paper size, you are required to choose either letter or legal size paper. I've called tech support 3 times, the latest call earlier this am, only to be disconnected. Yesterday I was told that I should go on hp/support and update drivers. My husband downloaded drivers, but still no fix. Unless this issue is resolved asap, I will have no option but to return this Envy Desktop, as I cannot run my business without this option.
Anyone have a similar problem? How was it resolved?

The available options will (probably) be determined by the printer driver in use.
This , in turn, will be determined partly by which Operating System and version you are using.
Once a printer model has been out in the field for some time (generally when the next generation (or two?) of devices has been announced to supersede it) that model becomes a 'legacy' device, and 'full-specification' printer drivers may no longer be supplied by the printer manufacturer, but basic (i.e. without too many options) drivers will (probably) instead be supplied with the operating system.

Hp laserjet pro M1536dnf printer error 30.0017, 41.3000, 49.1910 multiple time error

my hp laserjet pro printer m1536dnf many time error code 30.0017, 41.3000, 49.1910 and scan time full black pache all image.
please suggest me this problem
regards,
pravin

Hello, The 30.0017 error indicates a scanner motor failure, the 41.3000 is also associated to a beam detect error which are all print engine motor related issues. The 40.xxxx error is a general fault error that can be related to the scanner/beam issues your experiencing. If the printer is under warranty, it can be repaired, and if it is out of the warranty period, a service provider can quote you a repair cost.
(Although I am employed by HP, I am speaking for myself and not for HP)

HP LaserJet Pro CM141 prints blank pages and jams on nothing

My HP LaserJet Pro CM141 is printing mostly blank pages. Some pages come out with thick, verticle lines of smudged gray but other than that, it's totally blank. It does this for printing or copying and wireless or connected via USB. It started doing this after a wierd occurance where it would not stop printing the same print job over and over. After restarting it several times, I finally got it to stop printing the same print job but now, as I said above, it just prints blank pages. It also frequently claims to have a paper jam when it hasn't even attempted to take up a sheet of paper. The scanner still works, it's about 4 years old. The black cartiridge supply is at 90% although the colors are admittedly at 0% (but the lack of color never caused a problem before, I just print everything in black and white.) I already went through the steps of the trouble shooting guide, http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c02260982

Since you have only one toner cartridge with toner it is possible that toner cartridge has an issue. I would try at least another known good black toner cartridge.

HP Laserjet Pro 200 printing random rectangles in the middle of images

My HP Laserjet Pro 200 color printer is printing random rectangles in the middle of certain images. It doesn't do it all the time, usually it's with any images that are grey, blue, green or brown. I installed brand new HP compatable cartridges and the issue is still happening. I've shut down the printer and restarted it, I've ran the test page and it comes out perfect! Please help. Heather Whittle

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Laserjet pro 200 printer

I keep getting the low memory message. Then it won't print. I've tried some solutions on this page and elsewhere on the web and nothing works. Frankly, this is complete **bleep**. HP clearly knows that many people are having this problem, yet they do nothing except offer more and more fanciful crapola "solutions." We don't have all day to change out every driver and find this firmware and that software and this webpage. WE JUST WANT A **bleep**ING PRINTER THAT WORKS!!!!!!!!!!!!!!!!!

Hello , Thank you for visiting the HP Support Forums! I see you are trying to print to your HP Laserjet Pro 200 but you are getting a 'Low memory' error message. After some research I was able to find this possible solution by fellow Community member @AuntieEm: Re: LaserJet CP1525nw says "Memory Low" and will not print Let me know the outcome, I will watch for your reply.

HP laserjet pro 1102w printer problem

Similar Messages

Maybe you are looking for