HP LaserJet Pro 200: Scanning to Network Folder on windows server 2012 - can't find folder

I have searched everywhere and tried every suggested solution with no luck. Hence this post.
I have an HP Laserjet Pro 200 on our small company network (domain). We use windows server 2012 as our domain controller and as our file and print server.
There is a shared folder on the windows server that is shared read/write with everyone on the domain.
I can access the shared folder from any computer on our network.
However, when trying to setup the scan to network folder capability, the HP web interface always comes back that it can't find the network folder.
I have tested that it will work on our network if I want to scan to a shared folder on any of the other computers on our network (other than the main server).
So it appears to be some sort of security / firewall issue with our server, perhaps ?
Does anyone have any suggestions on how to troubleshoot this issue? Is there any technical documentation on how a server environment needs to be changed to allow this to work ? (BTW, this used to work, about a week ago and nothing changed except for installing the latest HP laserjet drivers on the windows server.
Thanks for any suggestions.
Todd

Similar Messages

HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue.
Is there a way to check the status of the embedded web server through the control panel on the printer?
Are there any other steps we can take to restore the embedded web server?
Thanks in advance.

Hello csandrews68,
I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
I suggest restoring the network defaults on the printer:
From the home screen on the printer push Setup (wrench and gear icon)
Go to and select Network Setup
Push Restore Defaults
With defaults restored, connect the printer back to the network and try to load the EWS.
Let me know if that helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro 200 M251n Color Printer driver for Window NT

Hi All,
Good day. I'm here to seek for help.
Currently i bought a HP LaserJet Pro 200 M251n Color Printer, but i want it to use at Window NT.
I need driver to run this printer at Window NT. Anyone can help and advice me? Thanks.

Hi,
The printer is not compatible with Windows NT, it is supported on Windows XP or later operating systems.
You might be able to get print capabilities through the network by using an alternative drivers:
Download and extract the drivers for the Laserjet 5550 below, which uses the same printing language:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=406807&swItemId=lj_23425_2&swEnvOid=24
Ensure the printer is connected to the network, from the setup menu select Reports > Config Report and locate the IP address of the printer.
From the control panel add a printer, select a local printer and create a new Standard TCP/IP port by using the printer's IP address.
From the printers list select Have disk and browse to the Laserjet 5550 drivers.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

New Windows Server 2012 R2 Standard in the environment. Added print services to it and added five HP printers to it and shared them. Also deployed the printers via group policy.
Clients are running Windows 7 Pro x64. The group policy fails to install the printers (error 0x00000002). We get the same error when trying to manually add the printer from the client side.
From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
Any ideas on troubleshooting this?
Thanks.
-John

John,
You might try playing with the HP universal driver, that might help you. Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
Check these GPO settings to ensure local machines can install the drivers.
1. Configure the following two Group Policy settings:
Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
This article might help you out also:
http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

Enabling network discovery on Windows Server 2012 R2

Good afternoon.
As per the title, I have set-up a new server at work. The server is running no problem but none of the other computers connected to the network can 'see' the new server. I've gone into the control panel and tried to turn on the network discovery, but it just
defaults back to 'off'.
I did so a search on here first before troubling anyone and I did find this answer :
Thanks for the post.
I did some research and found this issue may occur if the dependency services are disabled. Please make sure the following services are enabled and running.
- SSDP Discovery
- UPnP Device Host
Disabling Network Discovery/Network Resources"
That may well be the answer, but unfortunately that means absolutely nothing to me.
Is someone able to help me try and switch this on, but by offering an explanation an 'idiot' would understand.
Thanks in advance.

Hi,
This issue occurs for one of the following reasons:
•The dependency services for Network Discovery are not running.
•The Windows firewall or other firewalls do not allow Network Discovery.
To resolve the issue, follow these steps:
1.Make sure that the following dependency services are started:
DNS Client
Function Discovery Resource Publication
SSDP Discovery
UPnP Device Host
2.Configure the Windows firewall to allow Network Discovery. To do this, follow these steps:
Open Control Panel, click System and Security, and then click Windows Firewall.
In the left pane, click Allow an app or feature through Windows Firewall if you are running Windows Server 2012. Or, click Allow a program or feature through Windows Firewall if you are running Windows Server 2008 or Windows Server 2008 R2.
Click Change settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Select Network discovery, and then click OK.
3.Configure other firewalls in the network to allow Network Discovery.
4.Turn on Network Discovery in Network and Sharing Center
Quote from http://support.microsoft.com/kb/2722035
Steven Lee
TechNet Community Support

Windows 8.1 Pro cannot log into RemoteApp running on Windows Server 2012 R2

I have setup a vm running Windows Server 2012 R2 Standard and have enabled multiple RemoteApps. Everything is setup correctly and I can use RD Web Access to access the portal and connect to the remoteapps from any computer except my own. I am
running Windows 8.1 Pro and when I log into the RD Web Access portal, click on one of the apps, it looks like it's loading the session, but gets stuck on Preparing Windows. Everything else up to that point looks like it loads correctly, (i.e. -
Applying Group Policy Settings, applying desktop, etc...). When I log into my Windows 7 dev machine, I can access and run everything just fine. So there must be something between the Windows 8 and 2012 that isn't working quite right.
I have tried logging into the portal as myself and test users...same result.
any ideas?
Jon Wooten

i think there is something in your GPOs or collection settings causing an issue
this happens with any remote app, built-in stuff like notepad or just third party apps?
try not doing any kind of printer/device redirection from that host
you can also do winlogon logging to get a better idea of what's going on during the logon operation
you can also use the verbose logon messages GPO to get detailed login status info
if all else fails I think you need to isolate it by creating a test collection and test user with the bare minimum options

Administrator password reset CF145A LaserJet Pro 200 color MFP M276nw build Datecode august 6 2012

I have tied all my possible passwords that i know and have also tried the pressing and holding down the right corner and the left corner but to no avail it dosent work to do a cold reset... please held very fustrated!
This question was solved.
View Solution.

Hi hmotozuka23,
I see by your post that you need the reset for the Laserjet Pro M276 printer.
I can help you with this issue.
Please check your private messages for the reset.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Automaticly sync photos from iphone to shared folder on windows server 2012 r2

Hey,
I'm making photo's of cars for a company and we got a server running locally. I make photo's with my iPhone and i used to use dropbox for auto syncing pictures with the dropbox cloud and access from my pc.
Since dropbox is too slow and we got a server running with big amounts of storage i want my iPhone to sync with my server instead of my dropbox. i already got a shared folder and a network drive for this.
Thanks in advance.
Marc

The slow is more than likely your cell and or network service provider however this one may help.
http://windows.microsoft.com/en-us/onedrive/ios-faq
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

LaserJet Pro 200 Color MFP - Print a page, can't scan until you reboot

Brand new LaserJet Pro 200, print a page from a Windows 7, 8, 8.1, or 10. Prints perfectly.Print as many pages as you wish, perfectly prints.Try to scan:Either from the Flatbed or auto feederEither from the on board display or from your PCEither from Adobe or some other PDF solutionThe scan will come out with vertical lines throughout the page. Reboot the scanner.Try again:Either from the Flatbed or auto feederEither from the on board display or from your PCEither from Adobe or some other PDF sThe scan will be perfect. Again, doesn't make a difference on the OS, where the scan call is from, or how you scan. Any print leads to a bad scan. The printer has the latest flash and all workstations are using the latest scanner drivers.Any ideas?

Hi , Thanks for getting back to me! It's not abnormal to see some print quality issues once your toner is lower that 20%. Were you able to complete the steps in the document that I sent? Is there any cyan on the print quality printout at all? If not, it could be a defective toner cartridge. I would suggest contacting HP Support to inquire about a replacement if it is a Genuine HP toner cartridge.**Fill in the model number and the form to receive a case number for quicker assistance. If a replacement toner cartridge does not resolve the issue, then it's possible that the printer may need to be serviced. Hope this helps!Thanks again for posting, and have a great day.

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet Pro 200 color m251n web interface password reset

In past days I changed ip range in my net and when I needed to set the new ip in my printer I discovered I forgot the web interface password.
My printer have not touch display and for security reason I disable uso of menù from display. now I need to reset it. For my is good reset the printer as factory config. could you help me?best regards

Hey , Welcome to the HP Support Forum. I see that you're locked out of your HP LaserJet Pro 200 color Printer M251n's Embedded Web Server (EWS). I would like to help. There is only one way to remedy this issue. I will private message you the steps to complete a reset that will ideally clear out the password. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. Let me know if this works out for you. I f I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thanks for reaching out. Have a great day!

HP Laserjet Pro 200 276nw won't scan to network folder in 10.8.4

HP Laserjet Pro 200 276nw won't scan to network folder on either Macbook or MAcBookAir running 10.8.4. Everything works normal scanning to network folder on iMac G5 running 10.6. All other functions work normally--printing, printing from iOS device, scan to e-mail, scan to USB drive, scanning from Preview, scanning Sys Prefs Print and Scan, etc)
Installed latest firmware, HP Utility, and all Apple updates but still won't scan to network folder on a computer running 10.8.4.
Any ideas are much appreciated.

Thanks for the thought, but yes, I did register the folder with the printer. When I register the folder there is a 'Save and Test' button to see if the printer is able to communicate with the folder. When i click it, I get an error message--forget exact wording--but it says to check that the file path and name are correct.
Even though the test failed, the folder is listed in HP Utility and also shows on the printer's screen as a network folder. However, when I attempt to scan to it, it fails and gives an error message very similar to the one from the 'Save and Test'.
Other than this mode not working (apparently broken with the update to 10.7), I like the printer. Agree that HP ought to solve the problem for the current OS and currently shipping products.
No, it is not a 2013 MacBook Air.

HP LaserJet Pro 200 Color MFP M276nw scan to mail with google.

hello,
i got a HP LaserJet Pro 200 Color MFP M276nw printer. and i want to use the scan to mail feature.
But when i am setting up my google account as head account where the printer should send the mails from it doesn't work. i don't get the scan's into my mail. does somebody got a user guide for me how it is done and with the settings i have to use?

Hi @dennieboy96 ,
I see by your post that you would like to setup the scan to email. I would like to help.
Are you trying to setup the scan to email from the printer or from the HP Software?
I have included both documents.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 M276nw - Scan to Computer problems

So I've got an HP LaserJet Pro 200 M276nw. Have trouble activating the scan to computer option. Here's my setup:
One desktop computer and three laptops are connected to a local network. The desktop pc is wired to the network, all three laptops are connected wirelessly. The HP machine is wirelessly connected to the same network and also connected via USB to the destop pc. When I try the "scan to computer" option, I get the message that I should activate this function on the computer. Well, there's simply no such option. Here's a screenshot:
I also looked in the bin directory of the printer software but found nothing that looks like scan to computer:
So what am I doing wrong? Please help! Hope to hear from a member of the HP staff.
There's also something else - I can't seem to get the scan to network folder function working. I've specified a network folder, it has been shared with everyone (read/write access), all computers on the network have acces to it, but the printer fails to access it. The test in the HP device toolbox is also unsuccessful. What is the problem here?
Thanks!

Welcome to the HP Forums Cloyne,
I see by your post that you aren't able to scan to computer, the Mac is never recognized as a possibility in the Scan to Computer menu. I can help you with this.
Please provide the firmware version on the printer. Printing a Configuration Report.
The latest firmware online is 2014-06-04 , Version20140521.
Here is a document which shows the features available for scanning from the control panel.
The scanning to computer isn't listed. This model didn't originally come with this feature.
How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
I will check into this further, to find out if the new firmware allows this feature.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Network protocols supported by HP LaserJet Pro 200 MFP M276nw

Hello,
I am about to buy the HP LaserJet Pro 200 MFP M276nw however I cannot find in its manual what network filesystems/protocols it supports for scanning to network folder.
I need it to be able to scan to a NFS share preferably or to a samba share.
Can anyone confirm this printer is able to do this?
Regards.

Here is a link that will help get you the manual for this printer.
http://goo.gl/CR3tl
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HP LaserJet Pro 200: Scanning to Network Folder on windows server 2012 - can't find folder

Similar Messages

Maybe you are looking for