HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

Similar Messages

Set up HP LaserJet Pro 300 color MFP M375nw wireless printer

I switched computers, and set up the printer to the wireless network, however, I still can not print.

Hello Jill-UNS,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 300 color MFP M375nw is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

I have same problem - this doesn't help. Did you did something that worked?

Is there a way to reset the printer (laserjet pro 300 color mfp)

So I've had alllllll sorts of problems with my all-in-one. Often when I try to scan, it won't work, saying that it can't find the printer. Same when trying to print. I figured it was some sort of connectivity issue. I connect via my wifi network. So I tried to remove the software from my Macbook and now when I try to reinstall it, it can't find my printer. So I hook it up with a USB cord. Now it sees the printer, but it stalls out and won't connect... most of the time. At one point I got as far as the porting over my macbooks network settings over to the HP printer, but then it stalled out there. Any way to do a hard reset of the HP printer? I feel like something is going on with it's wifi abilities.

If it's really the colors, you can calibrate them using System Preferences Displays pane Color tab.
If it's actually the brightness, you cannot adjust it any brighter than the control allows on System Preferences Displays pane Display tab. The CCFL lamps used for the backlight do decrease in brightness over time (unless they are the new LED type found in some of the newer MacBooks and Cinema display)

LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

Scan page won't finish feeding when using the automatic document feeder. Leaves approximately the last 1 to 2 inches of paper in the scanner. The Scan ADF Paper Jam error message pops up. Seems like the page hangs/gets stuck once the page passes through the document feeder roller assembly. Haven't been able to find any information on what moves the paper through the scanner once it gets past this roller assembly.

@Debbie-M
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

LaserJet Pro 200 color MFP Touch screen totally blank

Hi I have a Laserjet Pro 200 color MFP 276n which was working fine on friday - printing via a USB and photocopying using the screen. I've come to use it this morning and the printer has nothing on the touch screen and nothing around the screen. I get a brief red cross in the bottom right when I turn the printer on but that's it.
But to make it worse the computer says that it can't connect to the printer to try and trouble shoot. I've tried 3 different USB ports on the computer and nothing happens.
I've tried disconnecting the printer from the computer and trying to do a reset as per other issues I've found say to press where the arrow is on the right when turning the printer on - nothing happens. I've also tried pressing on the bottom left of the screen when turning it on - no difference.
Does anyone have any other idea's please.
Many Thanks

Hi @wenddh,
I see by your post that there is no display on the printer. I can help you with this.
Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
The printer shouldn't be exposed to any electric or magnetic field.
Try another outlet in another room, just to rule that out.
I have provided a document for display or power issues.
The Printer Will Not Turn On or Respond When the Power Button or Power Switch is Pressed.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues

HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP LaserJet Pro 200 color MFP M276 -Device error and Cleaning cycle issues

This printer (HP LaserJet Pro 200 color MFP M276) will print 2 pages, clean, and then give an error message. It does this consistently. I have tried the suggestions posted in other forums and I have not had any luck. Any suggestions??

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

LaserJet Pro 200 color mfp m276 Printing issues

I have had this printer for about a year now. Now it has started printing solid black lines across the page I am printing, whether it be from my computer or a fax. I can run the cleaning process from the printer and its fine for a few hours and then back to the solid black lines. It gets so bad there is more ink on the paper than white when it does this. Have tried everything I can think of to cure this to no avail. I am running hp cartridges and just plain white paper. Any ideas as to how to fix this. These lines are thick lines, just not _____ but are about 1 " wide each.
I really need help with this really soon or I will have to replace it with another brand. I use this in my office and can't have important faxes coming across with all these lines so I can't read it. I posted this Saturday and still waiting for someone to respond.

Hi @RandallRaley ,
I understand that when printing, you are getting solid black lines across the paper and now on the back of the paper. You are using HP cartridges, plain paper and have ran the cleanings with the same result. I can help you today.
Try another type of 20lb -24lb plain paper to see if you have the same results.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
Select your operating system, click next, click the link for firmware.
Try printing again.
If the issue persists, follow the steps for aligning and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue.
Troubleshooting Print Quality Issues.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you getting the black lines on the Hardware Self Tests also?
Where is the printer located? (on a desk, on a enclosed shelf in desk)
What kind of paper are you using?
What is the weight of the paper?
Was there any black on the toner?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Laserjet pro 200 color MFP won't print cyan

My HP LaserJet Pro 200 color MFP M276nw printer has stopped printing cyan. It does it for files sent to the printer as well as just trying to make a copy. The cyan cartridge has been replaced and status shows full. I've run all the onboard diagnositics, cleaning page, etc. with no luck. How do I determine the problem and fix it?

Hi , Thanks for getting back to me! It's not abnormal to see some print quality issues once your toner is lower that 20%. Were you able to complete the steps in the document that I sent? Is there any cyan on the print quality printout at all? If not, it could be a defective toner cartridge. I would suggest contacting HP Support to inquire about a replacement if it is a Genuine HP toner cartridge.**Fill in the model number and the form to receive a case number for quicker assistance. If a replacement toner cartridge does not resolve the issue, then it's possible that the printer may need to be serviced. Hope this helps!Thanks again for posting, and have a great day.

Laserjet pro 100 color mfp m175

We have a number of HP LaserJet Pro 100 Color MFP M175's in our school. They are connected to the network via ethernet cable rather than wirelessly. A number of users print to them either from a Windows XP (running service pack 2) desktop or from a Windows 7 (newly built) laptop. They were working fine for a few days and then all of a sudden they may have any of the following problems:
unsupported personality error printed at the top of a lot of pages (ie you may try and print one page but hundreds of pages come out with this error).
there may be an invalid driver error on the control panel on the printer
there may be weird alien-looking characters at the top of hundreds of blank pages
initially all of the printers had the driver installed that came with the printers, when we started getting the error, we then tried running the diagnostics doctor on the hp web site, which said all the drivers were valid. We have also tried using the universal print driver from the HP support website, but still get the problem after a few days. We can make all of the errors go away by re-installing any of the above drivers, but then the problem starts happening again after a few days. The server is Windows 2003R2 running service pack 2, we have tried installing the drivers on the server too, but they won't install. Another printer was set up this week in the school office which only has people printing from Windows 7 machines and doesn't have the error - this could be because it's too soon to happen yet, or maybe because there are no Windows XP machines printing to it? (It does print through the same server as the others) Help would be greatly appreciated, we are a school and so can't afford to be wasting lots of paper, plus this is taking up all of our time rather than fixing other issues! thanks in advance

Tammy, sounds like there could be a couple things that might cause this issue. The first of which is that the RJ45 cable you are using to connect the printer might have become corrupted. I would replace that cord and see if the issue remains.
Second, I want you to see about updating the firmware from this website :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5076465
If that still presents issues, you can use that same website to download the more recent drivers. I would uninstall the old version you have on the computer and then open that link and install the full feature software.
Let me know how that goes and I will get right back with you!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

HP LaserJet Pro CM1415fnw color MFP printing & scanning problems

Ever since I purchased this multifunction color printer, it has been unreliable. My Mac Mini running the latest OS (currently Mavericks OX 10.9.2) will be printing and scanning fine, and then at some point it can't find the scanner, the printing slows to an amazing crawl, and then the printing stops altogether. I have repeatedly attempted to set up the printer under Preferences and have installed the latest drivers from the HP website. When that works, it's a short-term fix; eventually, the bugs come back. The darn thing won't scan or print again, and I'm pretty fed up. I paid a premium price for a premium color multifunction printer for my home, and it has been nothing but a problem. Help!

Hello StoopBoy,
Welcome to the HP Support Forums.
I see that you have an HP LaserJet Pro CM1415fnw color MFP being operated on a Mac 10.9.2. The CM1415fnw will not maintain a continual connection to the computer displaying errors and very slow printing. Since you have done a great job already troubleshooting the issue some of the steps I suggest will have already been done by yourself.
I suggest you take these steps to help resolve the issue:
1. Reset the Printing Systems by following this Apple Document: Mac OS X: How to reset the printing system.
2. Uninstall the HP LaserJet Pro CM1415fnw color MFP with this HP document: Uninstall HP printer software.
3. Repair disk permissions on the Mac.
4. Check for and install any and all updates on the Mac.
5. Downlaod and Install the printer HP LaserJet Pro CM1415fnw color MFP software.
I hope this helps and will allow you to have more continual functionality with your Laserjet.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro C1415fn color MFP - fax won't work

I have a LaserJet Pro CM1415fn color MFP on a Windows 7 64-bit laptop. I've been using the printer for two years now.
At the moment the fax function only works if I use it manually (i.e. if I place a sheet of paper on the scanner, select the "Fax" button on the printer touch pad and dial the number). However, if I want to send a fax via the PC interface, it won't work.
For example, if I open a PDF, click on "Print" and select "HP LaserJet Professional CM 1410 Series Fax", nothing happens -- no window/interface will open. If I select "HP Send Fax" or "HP Fax Setup Wizard" from the program menu, nothing happens.
I've always been sending faxes this way and I just don't know what happened... Can anyone please help?
Thanks in advance!
Claudia

Hi @Clabee ,
I see that you can't fax from the PC anymore. I can help you with this.
If this just recently happened, I would do a System Restore back to when everything was working properly.
System Restore for Windows 7.
If you would prefer not to do the System Restore, uninstall and reinstall the printer software. It might become corrupted.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
Click on the start up tab and click disable all.
Download, save and install the latest drivers.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
Test the printer and try sending a fax again from the PC.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw Wireless option is gone!!!

I have a HP LaserJet Pro 200 color MFP M276nw. The blue lit wireless icon used to stay on steady and all was fine for quite a while, then the Blue icon would start flashing like it lost it connection to the wireless router. I would just recycle the power on the printer and let it reboot. Usually it would connect with the router again but, it's been getting worse lately. I figured I would try to the latest firmware to the printer as maybe there was a clitch with the original firmware.........Well, now I get no blue wireless icon and the wireless menu disappeared from the touch screen. I tried to access the wireless settings in the web browser, the program said "this product does not support wireless connectivity.......WHAT?!!!!! I tried a "cold reset" on the printer to clear everything and still have no wireless option. I suppose its going to stick with the same firmware that was last installed. I did notice that the printer lists itself with an "N" at the end of the model # on any printed report instead of the "NW" its supposed to be. I did download the printer firmware from the Pro 200 color MFP M276nw support page. it's acting like it now has the firmware for the non-wireless version of this printer. This is the firmware I used
file name:
M276_colorMFP_Series_FW_Update-20140521.exe [1/1, 14.32M]
. Any Ideas how to fix this? Seems like this is the wrong firmware for this printer. Everything else appears to work ok.
Bob

****UPDATE**** After running a few copies through the printer the wireless feature showed up again. The printed reports started to show this printer with the "NW" at the end of the model number instead of just the "N". After a few minutes it all went away again. Seeing the correct model number show up for a few minutes made me believe the correct printer firmware is installed. To make this a short story, I ordered the wireless PCA assy (Small internal wireless circuit board, HP part #1150-7940) and replaced it. It's been working great for the past few days( since the board was replaced). Apparently, if the system does not see a working wireless board it defaults to the non-wireless model number and the wireless option disappears from the menu screen. The other thing is there apparently is no fault code that covers this type of failure.....frustrating, to say the least. I will update if this is not the fix but, it looks like I got it!
Thanks!!!!!!!
Bob

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

Similar Messages

Maybe you are looking for