HP Laserjet Pro 300 won't power up fully

I've had an HP Laserjet Pro 300 for 4 months and I haven't had any issues until today.
I ran a few scans without issue and then in the middle of a scan, it just quit scanning. It seems to have lost connectivity. 
I shut the printer down and attempted to re-boot it. It started booting then it quit shortly afterward and didn't finish booting. The power is up but it doesn't load fully. 
I have tried rebooting the computer connected to the printer and I have unplugged the power cord and printer connection and attempted to re-boot the printer several times but it has been the same result for a couple of hours.
I also unplugged the printer for over an hour in case it was simply overheating but it wouldn't re-boot after that either.
Any suggestions?

This is as far as it loads.

Similar Messages

  • Laserjet pro 300

    I installed LaserJet Pro 300 with Windows 8 and it worked great for several months.  Upgraded to 8.1 and have experienced problems everyday.  The print queue won't clear when I delete documents; starting and stopping the spooler doesn't clear the queue and shutting off the printer and restarting doesn't always work either.  Have received message from HP multiple times to Reinstall HPLJ300-400 color MFP M375-M475 -- to use this printer with Windows 8.1, you must reinstall it using the original installation media or download files.  Done, DOne and DONE!  Nothing works. . .when is this known issue going to be fixed and a patch available. 

    Hi Grills,
    Have you tried the steps listed here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02239404&cc=us&dlc=en&lc=en#N4211
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

  • LaserJet Pro 300 M351A Wireless Accessory?

    On the HP website it clearly states that my printer (HP LaserJet Pro 300 color M351) DOES have a "wireless capability" ...
    This statement is to be found under the "Technical Details" section in the paragraph entitled "Connectivity and Communications":
    Wireless capability - Optional, enabled with purchase of a hardware accessory
     I've Googled high and low and I cannot find out:
    What is meant by "a hardware accessory"
     Is it a print server device? Is it a wireless usb adapter? What?
     I have an urgent need to add this device to a small wirless network, but I can't figure oyt how to?
    Please help - anyone?

    Hi,
    Wireless optionality is available with the HP Jetdirect ew2500 802.11b/g Wireless Print Server (J8021A), that can be found listed within the Supplies and Accessories section below:
    http://www8.hp.com/emea_middle_east/en/products/printers/product-detail.html?oid=4346029&jumpid=oc_r...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Set up HP LaserJet Pro 300 color MFP M375nw wireless printer

    I switched computers, and set up the printer to the wireless network, however, I still can not print. 

    Hello Jill-UNS,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 300 color MFP M375nw is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can I get an HP Laserjet pro 300 Color laserjet multifunction printer to work in OSX 10.7.5.  the disk says it only supports OS.6

    Help. I just purchased an HP Laserjet Pro 300 multifunction laserjet printer for a new home office. I tried to load it on my Macbook Pro which has the OSX 10.7.5 operating system and the disk says it only goes to OSX 10.6.  Do I need to return this heavy printer? 

    Ditch the disk.
    If the Mac is up to date with all system updates, it probably is already carrying all it needs to talk to the printer. Just open the Print & Scan perfpane in System Preferences and get the two talking (USB: plug it in, Network: type in the IP address, if the Mac hasn't discovered it already), give it a few seconds and just confirm the correct model has been chosen. Many times the printer will pop up in the list on its own accord, else use the plus ( + ) button to add manually. Holler if you need more help.

  • Install os x 10.8.5 on hp laserjet pro 300

    Can you suggest the best route to get drivers for the HP laserjet pro 300 to run on OS X 10.8.5?

    Look at the HP web site. There were 2 drivers that showed up, but I don't know if they support10.8.
    http://www8.hp.com/us/en/drivers.html

  • Set up for scan to email for Laserjet pro 300 MFP M 375nw

    I am trying to set up a scan to email on my Laserjet pro 300 MFP M 375 and with my IP for my computer, I get as far as filling out the required forms.  All is well until I have to enter a password.  It will be rejected.  I have forgotten the password I initially used.  I would like to know how I can remedy the situation and insert a new password.  NO one seems to be able to help with this problem

    Greetings , I may be able to help you with renaming your scans. Now, I was not able to find any setting that would automatically increase the scan numbers when using the Scan to Email settings. If you use the Scan to Computer option it will number them the way you are describing; Scan0001, Scan0002, ect... That being said, you are able to manually rename the scan file during the Scan to Email process.When you choose Scan then EmailThen choose you outgoing email profileYou should see a Settings button on the bottom left of the display screenScroll through options and select the one that says FilenameEdit the scan file name using the onscreen keyboard Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • Hp laserjet pro cm1415fnw won't scan WIA error.

    We  just got a hp laserjet pro cm1415fnw, it manages to print, but unfortunately it won't scan. We set it up to be wireless since it will be used by various users. When I run the HP printer and scan dr. it says that there's a WIA error. I tried uninstallin and reinstalling all the drivers and software, as the HPPSdr reccommended, nothing happened. I went into the forums and checked the services that needed to be running in order for the scan to work. All the services were up, but still it won't scan. I'm running out of options here with this device. If  anyone could please give me some advice on how to fix the scanning issue I will be extremely grateful.
    This question was solved.
    View Solution.

    Hi @sil89, 
    I understand that you are unable to scan, but you can print over the wireless network. I can help you.
    Can you scan from any of the other networked computers?
    Are you signed is a the Administrator of that computer?
    WIA drivers are part of Windows Operating System.
    Run this Microsoft Fit It Tool to see if it will resolve this issue.
    Diagnose and repair Windows File and Folder Problems automatically.
    I have provided this document, just to make sure these are the same ones you had checked.
    This document is to Check the Windows Image Acquisition (WIA) services.
    Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
    Disregard the title.
    Go to Solution three: Check the Windows Image Acquisition (WIA) services.
    Temporarily turn of the Antivirus Software and try scanning again.
    If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
    Back up the registry first.
    How to back up and restore the registry in Windows.
    Restore Default Startup Type for Windows Image Acquisition (WIA).
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

    I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning"  and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks  

    Restoring the defaults doesnt usually purge out the memory of a printer.  You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

  • TS1367 I upgraded my cpu but when i start my mac pro it won't power on. I put back the original cpu, but still, it won't power on? What is wrong?

    M y mac pro won't power on. I upgraded my cpu, try putting bac k the original cpu but still it won't power on, what is wrong with my mac pro?
    Shear

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HP LaserJet Pro 300/400 (M375nw & M475dn) - Driver packages will not install

    Hello all,
    I need some assistance with a very persistent and frustrating issue trying to get driver software packages for our LaserJet M375nw & M475dn to install correctly. We are running Windows 7 Pro x64 on HP 8300 desktop PCs.
    We have these printers printing properly via our print server and the proper .inf driver but need the ability to scan to the PC. I would like to install the HP-provided software packages (which include the Scan driver & utility) but am running into the error below.
    "A problem occurred while preparing to install software to your system. Please restart your computer, and run this installer again. If the problem persists, please check the product support web site for your product."
    I get this error at 80% in the "preparing to install" process. I am using the latest drivers from the website for each of these models (which actually use the same package). I have tried both the Full and Basic driver package with the same results.
    We have these printers installed via a static IP on the Network, not USB. I am trying to install as a Local Administrator. UAC is disabled. The PC is fully updated and doesn't have much in the way of custom software. It has SCCM client, MS SQL Native Client, Google Earth, Adobe, Trend Micro AV, OnBase, Office 2007 and Chrome installed.
    Here are some of the things I've tried w/o success:
    Tried installing with latest drivers from HP website
    Ran all Windows updates
    Ran the Scrubber uninstaller provided in the package / Running "uninstall" executable from HP software
    Disabled all non-MS startup programs/services in msconfig, disabled Antivirus, rebooted, tried to again
    Restarting computer (many, many times between different troubleshooting steps)
    Tried disabling "Smart Install" (though I think this only applies to USB connections)
    Checked print spooler - it indeed is started/running properly
    Uninstalled all HP-branded software
    Can any of you offer some help please? I'm not sure what to try next.
    Some other posts I've looked at w/ no success are:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-CM1410-Series-install-error/td-p/3960480/page/2
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4208157&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03123997-9%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/laserjet-pro-200-error/td-p/2702269
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/laserjet-pro-400-color-MFP-m475dw-scanner-stopped-working-in/td-p/3109875
    Thank you!!!
    P.S. This thread has been moved from Laserjet to Multifunction and All-in-One. - Hp Forum moderator
     

    This is soulsecur again. I have used the FileToEmail.exe Utlity in the Driver package to generate logs. I looked through the installer log (hpbcsiInstaller.log) and found the info below. Can someone please help me make sense of this error? 08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Entry. 08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Preload Driver INF file list count = 1
    08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): INF File: ..\\hppasc19.inf
    08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. name: ..\\hppasc19.inf
    08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. m_installDriverInfFileName: ..\\hppasc19.inf
    08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. isPrinterDriver: True
    08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Entry.
    08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxServiceClient.DriverPackagePreInstall(): file = ..\\hppasc19.inf
    08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxDriverPackagePreInstall(): file = ..\\hppasc19.inf
    08:49:12.7343 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
    08:49:12.7343 Information DIFxServiceClient.CheckStatus(): Checking status of Service
    08:49:13.0643 Information DIFxServiceClient.FixChannel(): Channel appears to be ok
    08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Caught Fault Exception
    08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Exception Detail Message: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
    08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Exception Message: DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
    08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2
    08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
    08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2
    08:49:13.1424 Exception
    System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
    08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2 Void HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage)
    Server stack trace:
    at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at HP.InstallManager.CSI.IDIFxServiceMarshaller.DIFxServiceDriverPackagePreInstall(String infName)
    at HP.InstallManager.CSI.DIFxServiceClient.DIFxDriverPackagePreInstall(String infName)
    DifxHandler.DriverPackagePreInstall => DIFxServiceClient.DIFxDriverPackagePreInstall => NLogLogger.HP.CommonTools.CSI.ILogger.LogError
    08:49:13.2024 Information DIFxServiceClient.DIFxDriverPackagePreInstall(): proxy State: Opened
    08:49:13.2024 Information DifxHandler.DriverPackagePreInstall(): DIFxDriverPackagePreInstall(): returned: -1
    08:49:13.2024 !ERROR! DifxHandler.DriverPackagePreInstall(): DIFxServiceClient Preinstall failed: code = -1
    08:49:13.2024 !ERROR! DifxHandler.DriverPackagePreInstall(): DIFxServiceClient Preinstall failed: Error string = Unknown error (0xffffffff)
    08:49:13.2024 Information DifxHandler.DriverPackagePreInstall(): Returning: FinishedFailError
    08:49:13.2024 Information DriverPDUEngine.DriverPackagePreInstall(): Returning FinishedFailError
    08:49:13.2024 Information DriverPDUEngine.HandleDIFXAction(): Returning: FinishedFailError
    08:49:13.2024 Information InstallManager.FireStatusEvent(): Firing Status event. Sender = Driver PDU Engine, Text = HP.InstallConfig.CSI.PDUEngineActionItem, Status = FinishedFailError
    08:49:13.2024 Information PDUManager.get_PrepareToInstallPercentComplete(): m_stepCountPrepareToInstall = 26, m_numStepsPrepareToInstall = 32
    08:49:13.2024 Information InstallManager.get_PrepareToInstallPercentComplete(): Prepare to install percent complete = 81
    08:49:13.2024 Verbose CSIViewModel.PagePropertyChangedHandler(): >>>>>>> Property Raised - CurrentPercentage
    08:49:13.2024 Verbose CSIPageViewModelBase.CheckForUserError(): Checking for User Error: - EventStatus: FinishedFailError

  • Hp Color Laserjet pro M177fw won't print double sided anymore

    Hello.   I have a Hp Color Laserjet pro M177fw until about three weeks ago it would print double sided no problems.  I have used this printer on my pc and now my mac with no problems previously.  I am running a Macbook Pro (less then six months old) which is running 10.10.1 (Yosemite).  I attend college and I know at the end of last quarter during finals week (Dec. 15th) I still had the ability to do 2 sided printing.  Sometime between then and the new quarter starting last monday I lost the ability to do 2 sided printing.  After scouring the internet I have tried everything they suggest:
    Uninstalling printer and reinstalling
    resetting the printer setting on the mac and then reinstalling printer
    resetting the printer settings on mac, rebooting and then reinstalling printer
    installing older drivers( hp automatically installs newest drivers even if you use an older driver file)
    resetting physical printer to factory default and reconnecting to wireless network.
    repairing the disk permissions
    The only new software I have installed on the computer in the last three weeks is Adobe Creative Cloud and the printing problem preexisted that installation. 

    Hi @Arboria9 ,
    I see that you are experiencing issues printing two-sided from Yosemite. I would like to help you resolve this issue.
    You have pretty much have done all the steps that I would have provided.
    Are you still able to print two-sided from the Windows computer?
    Are you missing the option to select two-sided printing in the print driver?
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 6500)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    How was the printer name listed?
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP laserjet pro n1212mf won't scan

    I installed this printer over a network on my Macbook using the HP supplied CD when I was running OS X Lion.  I have upgraded to OS X Mountain Lion and I am unable to scan.  I have done Apple Software Updates.  When I open HP Scan it reports no scanner.  When I open Preview, scanning is grayed out.  Can anyone help?  Thanks in advance.

    Following Rajat's post, I decided to dig deeper into this printer support issue for the LJ Pro m1212nf printer.
    Again, I scanned backwards and forwards through the Oct. 2012 Apple update, HP Printer Drivers v2.12 for OS X, and did not find the m1212nf printer in the list of currently supported printers for Mountain Lion. Just in case I missed it the first and second time through.
    The software that Rajat suggests is universal binary (PPC/Intel) that was released in early June 2012 and was for OX 10.6 and OS X 10.7 support. There is no indication that HP tested it against Mountain Lion, and in fact, despite what HP says below, the printer no longer appears supported in Mountain Lion per HP documentation below.
    HP suggests that if this printer was installed and working with Snow Leopard or Lion, that during the upgrade process to Mountain Lion, the driver would be automatically updated and the printer would work with Mountain Lion too. Yet, by October 2012, there is no explicit HP driver support for the m1212nf printer on their site, or through HP printer updates supplied via Apple, for Mountain Lion. No doubt, there is temptation to install the old driver support. If it causes your system to crash dump, uninstalling it will be a PITA.
    See this link, “Installing the printer on a Mac running OS X 10.8 Mountain Lion (Network Connections Only). On that page, there is an expandable section entitled, “Is my printer supported in OS X 10.8 Mountain Lion.” When expanded, it produces another link to HP Printers supported in Mac OS X 10.6, OS X 10.7, and OS X 10.8. On that page, expand the category, HP LaserJet color printers and All-In-Ones. Even though you are presently on an HP Customer Care page for the M1212nf printer, HP indicates that this printer is not among the supported printers in Mountain Lion. In fact, support begins with the M1217mfw series!
    The best metaphor for HP these days is a dyslexic dog chasing its tail.
    I haven't changed my position. Originally, I could have sent you a link to the same outdated driver download, without all this extra investigation. I felt you deserved better, factual guidance.
    I still use an HP Laserjet 4M Plus that I purchased new in 1994. Cost $2400. Still driver support for it in Mountain Lion. Still no problems with the printer. It was made for HP by Canon. When it is time to replace this printer, HP will not make the short list.

  • HP laserjet Pro 300 m375nw Wireless printing is fine but "can't find scanner"

    I have recently got an HP Laser Jet Pro colour MFP M375nw.
    It installed perfectly on both my Win 7 laptop and on my Mac and I can print wirelessly without issues from either device or from tablets and phones.
    however, when I try and scan it says it can't communicate with the printer.
    When I try and run any utility (Hp print and scan doctor,  device toolbox, etc.) it says that it can't communicate with the scanner/printer.
    I have uninstalled and reinstalled but am at a loss how to fix this. Any ideas please?

    Hello nick-g,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
    I hope this helps!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My HP LaserJet Pro M251nw has no power

    Went out of town for two days and came back to a dead printer.  Checked the cord and it is OK.  Not a happy camper because this printer is only 6 months old and I have a set of new toner cartrages.  Not happy at all.  Do these things have a reset or fuse?

    Hi,
    First I suggest trying a differnt wall socket, ensure it is directly connected and not through any power strips, etc, as well as going through the steps below to troubleshoot a such:
    http://support.hp.com/us-en/product/HP-LaserJet-Pr​o-200-color-Printer-M251nw/5097632/model/5097639/d​...
    Other than that, as the printer is 6 months old I suggest contacting HP to service the printer.
    You may find the contact details by selecting your country and selecting Phone support below:
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.​html
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for