HP LaserJet Pro 400 m401a Go offline after restart the pc

i just buy a new HP Laserjet Pro 400 m401a and i install the drivers from the dvd that i found with the printer
but after i finish and shut down the computer i found the printer offline i try to remove the usb cable but nothing
i install the driver again i work but after restart same problem again
i have 2 printer conected with 2 computer the problem the the 2 printer
please tell me what to do
thank you

I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • HP LaserJet Pro 400 M401a Laser Printer Not Saving Downloaded Fonts

    Hi,
    we have recently purchased an HP LaserJet Pro 400 M401a Laser Printer which needs to be used with a system that downloads fonts for correct style printouts. The problem I am having is the fonts download initially which is great, but they are not saved by the printer after 1 printout so the user is having to download the fonts everytime she wants to print something.
    All other printers in the office are HP2055 and work as expected saving the fonts after the initial download. I have asked the support team of the application to have a look at the situation and they say everything is setup correctly so it may be an issue with the printer. Printer is installed on a Windows XP SP3 PC.
    Firware version: 20121205 (15 Dec 2012)
    Driver Version: 61.140.04.14138 (1 Jan 2013)
    Any help would be appeciated, thanks.
    Robert

    If the downloaded soft fonts are definitely not being saved (despite the download presumably terminating with a 'make soft font permanent' escape sequence), then the problem must lie in the firmware - and the only resolution is if HP releases  a new version with a fix.
    To be certain about which PCL5 fonts are resident in the printer, you have presumably printed off a  'PCL5 Typeface List' via the relevant front panel menu (assuming this printer has one).
    Or you could send the following direct to the printer to invoke that report:
    <Esc>%-12345X@PJL COMMENT Print PCL Font List
    @PJL DMINFO ASCIIHEX = "040004010105020402015E"
    <Esc>%-12345X
     where <Esc> represents the non-graphic) Escape control-code character (the character with decimal code 27, or hexadecimal 1B), and each PJL statement is terminated with a LineFeed control-code (decimal 10, hexadecimal 0A).
    Assuming that the printer is USB-connected, you could send the contents of the file (name, say, testfile.prn) holding the above to the printer using the copy command in a command-prompt session:
    copy /b testfile.prn \\computer-name\share-name
     where:
    computer-name is the name of the host workstation
    share-name is a share name of the installed Windows printer instance.
    I don't have access to your model of printer, but I do use a LaserJet Pro 400 Colour MFP 475dn (MFP equivalent of M451 printer), and this does appear to retain downloaded 'permanent' soft fonts - but only until the device goes into 'sleep' mode!
    So it is probably a common 'fault' (or 'design decision'?) across this family (LJ Pro 400) of printers.

  • HP laserjet Pro 400 color Printing Delay after 2 pages

    i have HP laserjet pro 400 color m451dn printer . which have printing delay problem. it prints 2 pages and then delay for 5 to 10 second, then it again print 2 pages and so on. anyone can help me urgently.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Brand new laserjet pro 400 only prints about 1" down the left side of the page

    I just unboxed a brand new Laserjet Pro 400 for a teacher, and upon running a test print, the printer only prints about 1" of the text down the left side of the page.  The text fades to white, and the entire remainder of the page is blank!  I re-seated the toner cardtridges, ran the cleaning program, and am still getting the same results!  Any suggestions?  A scan of the page is attached.  It came out this way after each solution that I tried!

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP LaserJet Pro 400 Printer M401a (CF270A) is not printing complete statement on letterhead

    Dear
    i have supplied printer HP LaserJet Pro 400 Printer M401a (CF270A)Qty 10 to my customer but its not printing complete statement there is missing ink in the words and also spots are coming on the page.
    the page is letterhead of the company.
    could you please advise what will be reason.
    Waiting for your reply.
    Regards
    Faisal Farooq

    VII,
    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Laserjet pro 400 MFP M475dw after new firmware no more WPA2

    Dear all,
    After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
    When we use WPA we are unable to connect.
    Can we download the older firmware again? I can't find it...

    Hello janwillem_v,
    The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP LaserJet Pro 400 color MFP M475

    Hi
    I've a HP LaserJet Pro 400 color MFP m475dw that is often offline.  This is the first problem.
    Anyway, I've been trying to install the software from yestarday but it's impossible becouse the install program stays at 99% for a long time and than a fatal error message cames:"due to the lomg time ....."
    I cannot print, scan or fax anything.
    It's real bothersome.
    Can anyone help me?
    Thx

    @ammarch 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Cannot connect to HP ePRINT Web site with LaserJet Pro 400 colour MFP M475dw

    LaserJet Pro 400 color MFP m475dw- Just installed. Scan, print ,copy ,fax all working fine! using WiFi 
    Using IMAC  OS 10.8.2 with all updates
    Using Netgear router  DGN2200v3
    Printer will not connect to HP  ePrint Website
    Printer connects to the Hp Support and Profile for fax set up etc.  But the  "HP Web Services"  Section when entered and hit the Enable Button-- It does not connect to the site --- it just seems to just refresh.
    if i try to connect thro the printer not the imac  and try enable web services it says" Connecting " on the screen BUT after a few minutes of trying --------  then says " CONNECTION ERROR-- the printer is unable to connect to the service. Check the internet connection 
    ANY IDEAS-- AM I MISSING SOMETHING ???
    MANY THANKS
    This question was solved.
    View Solution.

    I would try pulling up the embedded web server (EWS) by entering the IP address for the printer in to a browser and set a static IP address & DNS. 
    The information for the default gateway, subnet mask and that IP address can be accessed from the Setup menu on the front panel,  go to Setup>> Reports>> Network summary  and that will print it off.
    Once you have entered the IP in to a Browser and have the EWS pulled up, navigate to the tab at the top labeled “Networking”. Then click on IPv4 in the left column; that will bring up the Address configuration page.  Set the radio button to manual and fill out the IP address, Default gateway and Subnet mask with the information from the report. Do not worry about filling out the portion titled WINS server, that can be left alone.
    You will then want to fill out the DNS portion of the page, The Preferred should be set to 8.8.8.8 and the alternative/secondary should be set to 8.8.4.4. Then click “apply”
    Power cycle the printer. Turn it off, wait 30 seconds and then turn it back on. Once it is completely up and running reattempt to connect to web services. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • 2nd fax won't work at Laserjet Pro 400 MFP M425DN

    I have recently bought the HP Laserjet Pro 400 MFP M425DN, which is working almost fine.
    The problem is when i do want to send a fax, it will send it, but after that the second fax won't be able to send. I just get the message 'communication error'.  Also, the beep-sound the machine makes when you normally push a button on the touchscreen, becomes REALLY soft instead of a hard beep.
    The only way to solve this problem is to open the papertray and close it again. This is annoying due the fact that i have to send more than one fax a at time.
    PLEASE help

    Hello try to send the first fax then push home button and then send second fax

  • HP LaserJet Pro 400 color Printer M451dn won't print

    My HP LaserJet Pro 400 color Printer M451dn stopped printing after a short usage of non hp toner. How do I get this printer to accept these toner cartridge ? My 3600dn never has a problem

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • HP Laserjet Pro 400 color printer M451dn Driver needed

    I need to install an HP Laserjet Pro 400 color printer.  When I plug in the USB - it provides a driver which I can open and get to the install process -  The process takes me to the point of plugging in the USB and starts to install.
    After 10 minutes and getting to 99% complete the install stops because it is taking to long.
    I have searched for the driver on the web site but when I click on the printer name - the HP web site goes into an
    Internet Explorer cannot display the webpage
    Need help with installing this printer - this printer is only available to me by USB

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • Laserjet Pro 400 color MFP M475dw print in black and white

    Hello,
    I have a Laserjet Pro 400 color MFP M475dw printer that is contected to a network so that multiple users can print from it. I want to be able to restrict it so that they can only print in black and white and double sided. Is this possible? and if so could you please tell me how?
    I am not able to restrict them on a print by print basis, hence I am looking for a solution where I only have to make the change once.
    Thanks for your help!

    I understand you want to change a setting one time so that no matter who is sending the printer a print job it prints in gray scale.  Actually I found two ways to do it.  Here is the basic way to do it as described on page 16 of the User Guide.  Also, you could set up this printer to receive emails (ePrint) in gray scale only.  I just did a test after making changes in my ePrint settings at www.eprintcenter.com and no color was printed on a regular document containing color.  I hope that answers your question.  If not, let me know. I will be happy to explain greater detail.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Hp laserjet pro 400 color MFP model m475dw repair manual

    While trying to copy some documents, display shows the following errors:
    1.-  Service error 49.  I'd review on a downloaded owner manual what to do and no more messages. After I restarted the printer shows the following error.
    2.- Service error 79. I'd followed the the owners manual once again and the problem was solved, then I discovered that the upper paper tray send the message to remove clogged paper, I'd removed the paper and then when I try to make a copy the printer showed me on display the scanner number 6 error.
    I want to check the upper tray assy to avoid broken parts cause the tray stared to do a rattling sound...
    what should I do?. 

    Hello Ajton,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 400 color MFP M475dw is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Laserjet pro 400 eprint center is gone??? how do you manage, download or delete apps?????

    Apparently there's a new "upgraded" site(hpconnected) that i get sent to instead of being about to access the eprintercenter? This site has hardly any options to do anything with my printer....i obviously see where to order more ink...you never miss the chance to sell us more of something...where do I manage the apps on my printer....I have tried to set up the scan to email wizard but i have no freaking clue what my STMP server is...i tried for about an hour to figure that out. Then after trying scan to a network folder...couldnt get that to work either....whys this so complicated? Now I want to add the scan to email APP onto my printer....
    ISSUE 1....THERE IS A BUNCH OF JUNK APPS ON MY PRINTER AND THIS NEW SITE DOES NOT GIVE ME OPTIONS TO DELETE THEM. ON MY PRINTER IT TELLS ME TO GOTO THE SITE TO MANAGE THEM.....
    ISSUE 2....I WANT TO DOWNLOAD THE SCAN TO EMAIL APP BUT THAT IS NOWHERE TO BE FOUND IN THE NEW HPCONNECTED SITE....
    Can anyone help with this??
    My printer info....
    HP Laserjet Pro 400 MFP M425dn

    Hello wsherman,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • LaserJet Pro 400 M401dn - 79 SERVICE ERROR

    We have only had this printer less than a year and I am getting a 79 SERVICE ERROR.  I have power cycled, unplugged and all the normal tries... no go.  It will print the menu map but will not accept a print job from a user. I try to get to the printer page on HP.com but it errors out so I cannot get to any of the support docs for the model.  Anyone out there have a suggestion? 

    I ran into this same problem with the LaserJet M401dn. I noticed this issue occured when the printer was hooked up to the PC via USB. I followed HPs steps on trying to fix this problem and needless to say, their steps weren't worth a hill of beans. The printer is working now now via these steps that I'm going to list. 1) Restart the printer with only the power cord being attached. If you're STILL getting the 79 error service, then it is most likely a firmware issue. Luckily for me it wasn't. The printer started right up as it should.2) If your printer starts right up, attach an Ethernet cable from the printer to your router/switch/DSL or cable modem.3) Select the Network icon on your printer screen and check to see if your printer has authenticated to the network and lists an IP address. If you're on a home network the IP address will show something like 192.168.x.xx. 4) Once connected to the network you'll run a firmware update. Click on your Settings icon, select LaserJet Update, Check for Updates Now. Continue by selecting the update and download and install. After the firmware installs, at this point you might be able to get the printer to work by hooking the USB cable back up to the printer. I on the other hand did  a couple other steps before hooking the printer back up. 5) I installed all of the Windows Updates (critical), updated Java6) Uninstalled the HP printer software for the M401dn and restarted the PC7) THIS STEP IS NOT FOR THOSE THAT AREN'T FAMILIAR WITH EDITING THE REGISTRY. If you have no knowledge of how to edit your registry, then PLEASE DO NOT ATTEMPT this. Have someone with knowledge do this step. I, nor HP can be held responsible for any mistakes that you make with this step. DO AT YOUR OWN RISK. In the registry I searched for Packard and deleted all Keys or entries that had M401 listed. DO NOT DELETE THE KEY IF IT DOESN'T LIST M401, as there are Hewlett-Packard printer drivers that are built into the operating system and they do show up in the registry.I ran through the registry twice searching for any sign of the printer driver being installed. Restart the computer again.8) Reinstall the HP LaserJet Pro 400 M401 Printer Series PCL6 Print Driver that is relevant to your PC. (Sorry, I don't know how to deal with Macs.) DON'T download the Full Software and Drivers or the one WITHOUT the installer. Don't use the disc to install the drivers either. Just download the most recent version of the software from HPs website. Install the software and attach the printer when asked to do so. Hopefully you're golden at this point just like I was! If for some reason this doesn't work for you, I would format your hard drive and reinstall Windows and all of your software. Apparently there is something within the registry or on your computer that is keeping the printer from working. I hope this helps you all out!

Maybe you are looking for