HP Laserjet Pro CP1525nw Color Printer Series

I would like to be able to AirPrint from my iPhone and iPad to this printer, which is bluetooth/wireless enabled.  From your website, it doesn't show that this printer is listed as a compatible AirPrint printer.  I downloaded the AirPrint app on both devices, but now am not sure I will be able to send things to my printer.  Any guidance will be appreciated

Hi,
The CP1525 do support AirPrint as you may find listed within the Supported Models section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&product=4052980&tmp...
Be sure to get the latest firmware which also adds AirPrint support:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02843058&cc=us&dlc=en&lc=en&product=4052980&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Getting Darker Blacks from My HP LaserJet Pro CP1525nw Color Printer

    Hi. I own an HP LaserJet Pro CP1525nw Color Printer and am on a Windows XP system. For regular printing, it works great. However, for some graphic work I am doing, I can not get the blacks to print out dark enough. I can not find any settings on the print properties panel that would allow me to set a darker black coverage. Anyone have any suggestions?

    Hey,
    I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro.  Have you tried a full network power cycle?
    Unplug the router and printer while on
    Power down the iOS device completely.  Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_​iphone.htm
    Wait 30 seconds
    Power the router up and wait for it to completely initialize before proceeding
    Power the printer up and wait for it to completely initialize before proceeding
    Power the iOS device back up
    It sounds like the network most likely lost communication with the bonjour service of the printer.  
    If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&​...
    Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP LaserJet Pro CP1525nw Color Printer with Apple iPad & iPhones

    I have an HP LaserJet Pro CP1525nw Color Printer that I've successfully used as an "air print" device to print from both iPhones and iPads.  For some unknown reason, I can't print from iPhones and iPads anymore.  Is anyone else experiencing this problem?
    Is this a result of Apple most recent iOS upgrades?  Everything was working with iOS 6.0.x and seems to have stopped working with iOS 6.1.x.
    I "think" I'm try to determine what I need to upgrade (printer firmware or iOS device firmware . . . or both).
    Thanks in advance.

    Hey,
    I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro.  Have you tried a full network power cycle?
    Unplug the router and printer while on
    Power down the iOS device completely.  Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_​iphone.htm
    Wait 30 seconds
    Power the router up and wait for it to completely initialize before proceeding
    Power the printer up and wait for it to completely initialize before proceeding
    Power the iOS device back up
    It sounds like the network most likely lost communication with the bonjour service of the printer.  
    If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&​...
    Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP LaserJet Pro CP1525nw Color Printer--use it wired

    My wireless router gave out. How can I use my printer--wired directly to my PC?

    Hey,
    I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro.  Have you tried a full network power cycle?
    Unplug the router and printer while on
    Power down the iOS device completely.  Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_​iphone.htm
    Wait 30 seconds
    Power the router up and wait for it to completely initialize before proceeding
    Power the printer up and wait for it to completely initialize before proceeding
    Power the iOS device back up
    It sounds like the network most likely lost communication with the bonjour service of the printer.  
    If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&​...
    Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP LaserJet Pro CP1525nw Color Printer - label print issues

    I'm getting great plain paper printing, however, my labels are coming out with sporadic patches of white where there should be color, especially along the edges.  Also, the black text is printing light "shadow" text in areas that should be white/unprinted.  Can anyone help?
    Ann

    Hey,
    I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro.  Have you tried a full network power cycle?
    Unplug the router and printer while on
    Power down the iOS device completely.  Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_​iphone.htm
    Wait 30 seconds
    Power the router up and wait for it to completely initialize before proceeding
    Power the printer up and wait for it to completely initialize before proceeding
    Power the iOS device back up
    It sounds like the network most likely lost communication with the bonjour service of the printer.  
    If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&​...
    Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP LaserJet Pro 400 color Printer M451dn won't print

    My HP LaserJet Pro 400 color Printer M451dn stopped printing after a short usage of non hp toner. How do I get this printer to accept these toner cartridge ? My 3600dn never has a problem

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • HP Laserjet Pro 400 color printer M451dn Driver needed

    I need to install an HP Laserjet Pro 400 color printer.  When I plug in the USB - it provides a driver which I can open and get to the install process -  The process takes me to the point of plugging in the USB and starts to install.
    After 10 minutes and getting to 99% complete the install stops because it is taking to long.
    I have searched for the driver on the web site but when I click on the printer name - the HP web site goes into an
    Internet Explorer cannot display the webpage
    Need help with installing this printer - this printer is only available to me by USB

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • Please i need help to install the HP laserjet pro 100 color MFPm175 series

    hello sir,
                 please i need a help how to install hp laserjet pro 100 color mfp m175 series drive.
                 i just bought the printer today.

    Hi, which operating system are you running?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP laserjet Pro 400 color Printing Delay after 2 pages

    i have HP laserjet pro 400 color m451dn printer . which have printing delay problem. it prints 2 pages and then delay for 5 to 10 second, then it again print 2 pages and so on. anyone can help me urgently.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Laserjet Pro CP1525 color printing question

    This is a color printer, but what if I am only printing a document that is just text (black and white).  Do I need to so into my printer setting everytime and change it to grayscale just to print or worry that it will use the color to make black?
    I always had to worry about this with another brand, the salesguy says this printer automatically does what it's supposed to, but I see no documentation in the manuals to prove that.

    Hi @kjatc,
    I see that you are getting red horizontal lines when printing in color. I would really like to be able to help you resolve this issue today.
    I would do a hard reset to see if will help.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document with the steps for calibrating and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue. Some of the steps you have already tried, but please try the other steps listed. Troubleshooting Print Quality Issues.
    Print a Diagnostics Page: Go to Setup, Reports Menu, Diagnostics Page.
    Update the printer's firmware. Software and Drivers. Select Go under Option 2.
    Are you using Genuine HP Toner?
    What are the toner levels?
    What were the results of the Print Quality Page and Diagnostics Page?
    This will help determine if it is just one specific toner, possibly a fuser or hardware issue with the toner. Feel free to include a screen shot of both pages.
    If you appreciate my efforts, please click the Thumbs up button below.
    Please let me know the results. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • 79 Service Error Message on the LaserJet Pro 200 color M251 Series printer

    I've been using this printer with the Mac OSX 10.9.4 OS for about 9 months.
    I'm now getting a 79 Service Error message. I've tried to turn the printer Off and On several times to no avail.
    Strangely enough, when I try to print a new document, a message keeps appearing on my computer, that says "The printer has been paused. Do you want to resume printing?" When I click the Resume button, nothing prints out.
    The user manual says that the 79 Service error message is linked to a firmware problem? Do you know how I can fix this issue?
    Many thanks,
    Pierre
    This question was solved.
    View Solution.

    Hi NebraskaPierre,
    I see by your post that you are getting a Service 79 error on the printer. I can help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    This can be caused by malformed PostScript documents.
    Please do the following:
    Locate the on/off switch on the bottom of the printer.
    Switch the printer off position and COUNT to 10.
    Turn the printer on again and the system should be all set.
    Try printing from another application to see if you have the same issue.
    If a print job of yours repeatedly causes this error, it may indicate a problem with the print job.
    Try breaking your document up smaller before printing it.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer.
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon ( ), and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign, then select the printer from the list and click on the Add button.
    (make sure it shows the printer name beside Use, not the Airprint driver)
    Try printing again. 
    I would recommend to run a firmware update on the printer if the issue continues.
    There are none on the website for the 10.9, but you can run the updates right from the printer.
    Go to setup, services, Laserjet Update, Check for Updates now.
    What are you trying to print and from what application are you using? (PDF)
    Please provide in detail the results if you are still having issues.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro 500 color printing quality

    Hi,
    Last May, I bought the HP LJ Pro 500 MFP 570n printer and since then I have PQ problem.  When printed, the documents are not as what is on the screen:  B&W pictures are green and white; colour pictures are bland and too dark.
    There is no problem when scanning.
    HP provided me with Level 1 Maintenance, meaning changing yellow cartridge, changing the HV power supply, and changing the Transfer Belt.  Driver has been updated and color calibrated.
    According to Level 2 Maintenance Management, located in Bangalore, India, there is no such PQ issue.

    Color calibration may not be the only way to achieve color match output with a printer (irrespective of drivers or operating system). 
    To actually achieve WYSIWYG (what you see is what you get) (i.e very close color match) you might need to use an additional software/hardware to perform color calibration between the different devices which are involved in creating, editing & printing the particular image or document (like scanner, camera, printer, monitor etc.)
    If you are looking for nearest color match using the product's inbuilt options, then you may print & use RGB & CMYK Samples (use the information menu from device control panel for printing these samples).
    Use the color mix as given in the samples while editing your documents/images.  Also try to  use the other advanced color match options available using the printer driver properties.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • HP LaserJet Pro 200 color Printer Offline - Windows 8.1

    Hello:
    This subject appears to re-appear a lot, but I am getting nowhere in how to fix it.  I have tried various steps recommended on how to resolve this, but it is not working consistently.
    I have 3 PC's:  2 desktops and 1 laptop running Windows 8.1.
    I have a wireless network with WEP encription.  I have connected the printer to the network.  The printer IP config is set to channel 6.  The firmware date code is 20121026.
    Every time I try to print, the printer is offline.  Sometimes I can fix this by removing the printer from the device listings and then scanning for new printers.  When I do this, it will print for the session I am using the computer, but soon afterwards it goes offline again.
    When I plug a computer directly to the printer, it usually works, but not always. 
    It seems to me that this is a PC driver problem - not the printer, but I am not sure.
    Thanks,
    Scott Nichos

    Thanks for clarifying Scott,
    From the printer front panel, click the Setup icon and then tap the Service option.
    Select Laserjet Update and then press on Check for Updates now
    Allow the printer to complete the task till the update completes.
    If the update fails or the device show that the latest update is already installed, temporary connect the printer to your PC with a USB and then update the firmware by running this tool.. be sure to select the newly added USB queue and not the existing network queue:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-6&cc=us&dlc=en&lc=en...
    Once the update completes, the firmware datecode should appear as 20140521.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP laserjet pro 200 color printer m251n dependency on usbstor

    hello sir.

    @Gazims 
    Thank you for your post on the hp.com forums. In an effort to help you with your issue, could you please clarify what you are having trouble with. I understand that your printer is the m251n laserjet but do not understand the dependency part. Please clarify and I would be happy to help you.
    Thank you.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Laserjet Pro 200 Color Printing Horizontal Red Lines

    When I print in color, I get horizontal red lines across my page.  When I print in black and white, it doesn't happen.  I've cleaned & calaborated the printer & it's still doing this.  Can anyone help?

    Hi @kjatc,
    I see that you are getting red horizontal lines when printing in color. I would really like to be able to help you resolve this issue today.
    I would do a hard reset to see if will help.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document with the steps for calibrating and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue. Some of the steps you have already tried, but please try the other steps listed. Troubleshooting Print Quality Issues.
    Print a Diagnostics Page: Go to Setup, Reports Menu, Diagnostics Page.
    Update the printer's firmware. Software and Drivers. Select Go under Option 2.
    Are you using Genuine HP Toner?
    What are the toner levels?
    What were the results of the Print Quality Page and Diagnostics Page?
    This will help determine if it is just one specific toner, possibly a fuser or hardware issue with the toner. Feel free to include a screen shot of both pages.
    If you appreciate my efforts, please click the Thumbs up button below.
    Please let me know the results. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • Office 2013 installed with KB2817430, windowsupdate still finds KB2850036. difference between KB2817430 and KB2850036

    Hi, I've made a silent Office 2013 installer with /admin and put SP1 MSP's in the updates folder. After deployment under installed updates it shows: Service Pack 1 for Microsoft Office 2013 (KB2817430) 32-Bit Edition But when I check for new updates,

  • 5800 V40 Music palyer problem

    I updated my 5800 to new v40 firmware, but now getting wired problem in Music player, its intermitently gets stuck in Music Player first screen where its displays 'Artists, Albums' etc. I am not even able to exit music player using 'Exit' option. I h

  • Aironet 1300 antenna diversity query

    good day! does anyone had already configured an antenna diversity for aironet 1300 with 2.4Ghz frequency? we want to have a ring type network, we have a site A that needs to have a stable link and this site A has an line of sight to two active sites,

  • Server box just went down, log shows Bing/MSN crashing it?

    I don't quite know what this means but randomly I was watching a Myth recording tonight and then xbmc froze, torrentflux died and I went downstairs to check the server. My keyboard was flashing lights as thought it had rebooted and couldn't detect a

  • Default dock settings

    Hello I want to change the default dock setting so the new user who logins gets all the program and so in the dock i have make. We have all mac in connected to Windows 2003 Active directory I have done it before but i have forgot that. Thanks Emac