Hp Laserjet Pro M1530 MFP Mac OS 10.6.8

I just bought this Laserjet and have installed it correctly as far as I can see. For the Scan function according to Manual I open the HP Director and click Scan. However there is no Scan function to be found in the HP director.
Pls HELP!!!! I need the scan working asap

Hi Mirre,
Welcome to the HP Forums.
I see that you are having issues scanning on the 10.6. You have no scan function in the HP Director software.
I will be happy to help you.
I have provided a document for how to scan with Apple software to see if you have the same results.
How to Scan: OS X v10.7.
Disregard the title.
Select Scan without HP software. Select Method three.
If you didn't run through the fax software during the initial install it won't allow you to scan. (even if you aren't using the fax you have to run it)
If your not sure go ahead and run the fax setup assistant.
Close all applications.
On the Apple menu bar click Go, applications, Hewlett Packard, device utility, open the HP setup assistant and run it.
You should also have one listed as HP Scan to try and run it.
On the Apple menu bar click Go, applications, Hewlett Packard, open the HP Scan and try to scan.
Now try and scan again.
Please provide in detail the results if you are still having issues.
How is the printer connected? (USB/Ethernet)
Were you able to scan from Apple's software?
Did you run the setup assistant and were you able to scan?
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Is this the Laserjet Pro M1536?
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Keith Gilabert, "Mac does not connect wirelessly to my HP Laserjet Pro 200 MFP"

My Mac was connected by USB but I want to use wireless. I have 3 other devices connected to my printer. Is there a limit to how many wireless devices can be connected to my Laserjet Pro 200 MFP printer at one time?
Thanks,
Keith Gilabert
Keith Gilabert
This question was solved.
View Solution.

Thank you!
Keith Gilabert

Issue Printing One or Two Checks on HP LaserJet Pro 200 MFP M276nw

I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

Me too.
I've been using an alternate printer for printing the checks, but I'd rather get rid of the old one. (The HP Laser Pro 200 takes up a lot of space!)
KC, Seems like you've been waiting for an answer for a VERY long time. I'm not going to hold my breath.
Hey HP! Do you ever monitor this site?!
KC-Texas wrote:
I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

2nd fax won't work at Laserjet Pro 400 MFP M425DN

I have recently bought the HP Laserjet Pro 400 MFP M425DN, which is working almost fine.
The problem is when i do want to send a fax, it will send it, but after that the second fax won't be able to send. I just get the message 'communication error'. Also, the beep-sound the machine makes when you normally push a button on the touchscreen, becomes REALLY soft instead of a hard beep.
The only way to solve this problem is to open the papertray and close it again. This is annoying due the fact that i have to send more than one fax a at time.
PLEASE help

Hello try to send the first fax then push home button and then send second fax

HT4356 HP LaserJet Pro M1217nfw MFP. AirPrint issues.

My printer, the HP LaserJet Pro M1217nfw MFP, is listed above as an AirPrint-enabled printer model, but I am still receiving the “No AirPrint Printers Found” message. Since I have successfully printed from three PCs connected to the WiFi, I know the HP M1217 wireless printer is working.
Not a Apple network.
2 PCs running Windows 7 and one XP.
iPhone 5.1.1
Can anyone help my iPad and iPhone 4s find the printer OR explain why these devices do not work and my three PC do?

Hi Scott, ensure that you have the latest firmware installed that enables this function.
Hope this helps!

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

Network protocols supported by HP LaserJet Pro 200 MFP M276nw

Hello,
I am about to buy the HP LaserJet Pro 200 MFP M276nw however I cannot find in its manual what network filesystems/protocols it supports for scanning to network folder.
I need it to be able to scan to a NFS share preferably or to a samba share.
Can anyone confirm this printer is able to do this?
Regards.

Here is a link that will help get you the manual for this printer.
http://goo.gl/CR3tl
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Driver Windows XP for HP Laserjet Pro 400 MFP M425dn

I have a problem installing the driver HP Laserjet Pro 400 MFP M425dn for Windows XP Profesional SP 3.
At the beginning of the installation appears error message "HP CSI Shell - found an error" but the installation continues, but after a few seconds the following message appears "HP installer - found error". The installation continues, and soon appears a message that says "Click the" Install "to install the driver," I click the button "install" and appears the message "encountered a fatal error that prevents the use of the product".
What's the problem? every time one and the same set of error in the printer to the operating system Windows XP.
With other operating systems is no problem

Hey @AlchemistYA ,
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 MFP M425 page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
I worked for HP.

Toner won't come out LaserJet Pro 400 MFP M425

toner won't come out LaserJet Pro 400 MFP M425. It's stuck inside.

I am sure it is stuck on the right side. Odds are also that it is an aftermarket toner and not an hp original. That said it will not be easy to remove. You will have to do a google search for the service manual. The right side cover needs to come off and it is not easy since the back, top and control panel need to come off. Once you have the right side cover off you will see a big while gear behind the metal plate that holds the gear assembly to the right side. You need to turn that gear by hand a little and it should free up the toner to come out. When you remove the toner you will see a sort of bell housing metal piece that hangs on the right side of the toner. That assembly fits down the right side and locks into the mech that turns the toner drum. If that piece has defect it gets stuck. Good Luck. First thing I would try is to unplug the printer, then plug the printer back in and let it come to ready and open the door to see if the toner now comes out. Sometimes turning the printer off and then back on will turn that gear by itself and free that piece.

Cold reset HP LaserJet Pro 400 MFP 425dw

Hello,
We Just recieved our HP LaserJet Pro 400 MFP 425dw in the office.
I configured the networking and set a administrator PW ( 20 characters random generated with keepass software).
The has been set, but seems to be different from the one in our Password application - i can't enter the printer setup.
I already tried to reduce characters or add space - nothing works.
I've already googled how to cold reset the printer, bur the buttons on the touchpad don't seem to work when booting.
What are the button combinations for cold reboot?
Please help!!
br
G

Hi @biggddc , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

SCANNING ERROR HP Laserjet Pro 400 MFP M425dn

Hi there,
The issue I am having with my HP Laserjet Pro 400 MFP M425dn is that when Iam scanning some pages scan in parts black and sometimes the whole page black??? (see botttom of page where the scan preview shows)

Hi chicalatina,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP LaserJet Pro 400 MFP M425 - paper feed is always legal

HP LaserJet Pro 400 MFP M425
im unable to have the paper feed use letter paper.
I can scan with the scanner bed and it select letter paper correctly, but when i attempt to use the paper feed its always legal size
Ive restored to factory default settings, but still issue continues.
how can i make the change to have it select letter size.
thank you
This question was solved.
View Solution.

Hi @biggddc , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Laserjet pro 400 MFP M475dw after new firmware no more WPA2

Dear all,
After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
When we use WPA we are unable to connect.
Can we download the older firmware again? I can't find it...

Hello janwillem_v,
The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

LaserJet Pro 400 MFP not working on the network port that works HELP !!!

I have a new LaserJet Pro 400 MFP (M425dn) USB works fine. When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity. So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it - no network activity. I tried several ports in the front office and the printer can't connect to the network. BUT HERES THE FUNNY THING . If I take the printer to the back room where the router/switch is and plug it directly into the switch
( the same port as the front port ) it works !!!!! so why doesn't the printer work at the front office network port, where all the other devices work just fine using the same port ? But it will work, at the router/switch using the same port lol this is drving me crazy
any help ? ? ?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Laserjet Pro M1530 MFP Mac OS 10.6.8

Similar Messages

Maybe you are looking for