HP laserjet pro M1536dnf wireless setup to use Air print

Since I trying to print from my new Ipad Air, excuse my newbie networking printing questions!
This what I know so far:
1. I understand my HP laserjet pro M1536dnf is 'not' a WiFi  printer.
2. As per HP Support and the Apple Support web sites, my HP laserjet pro M1536dnf is 'Air Print' enabled. I guess a certain firmware update must of incorporated the Air Print capabilty!
3. As per HP Support web site, I currently have the latest firmware installed ( 20130815 ).
Note: On my Config Report, it shows the status for both IPv4 and IPv6 as 'Network Cable Disconnected '. I have Show IP address as enabled.
3. My home setup has the cable internet going from my cable modem to my wireless Linkys E3200 router via coaxial cable. From my router to my computer is wired via the Ethernet cable. My HP Laserjet 1536dnf printer is wired to my computer via USB cable.
Questions:
1.  Going from I seen and read on on-line, is correct to say 'I will have to change my Ethernet cable going from the router to the computer and change it to from the router to the printer's Ethernet port?
2. Will I have to remove the USB from Printer to the computer?
3. By removing the USB cable between the printer and the computer, how would my computer communicate to the printer to perform a print job? Unless, I'm guessing, I add another Ethernet cable between the router and my computer's  ethernet port!
4. Any other tips, that I might have missed?
This question was solved.
View Solution.

Hi,
Based on the following list, your printer supports AirPrint:
   http://support.apple.com/kb/ht4356
Therefore to print from your iPad, please use the following instructions:
How to print in iOS
You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
To print, follow these steps:
Tap or , which are at the bottom of your screen.
Tap .
Choose your printer, the number of copies you want, and then tap Print.
Note: If you are printing for the first time, ensure that you are within range of your printer. All AirPrint-enabled printers within range will be displayed.
Source: http://support.apple.com/kb/HT4356
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Laserjet Pro 200 color MFP M276nw, cannot air print

    Madam/Sir,
    How do I install air print on my HP Laserjet Pro 200 color MFP M276nw so that I may print using my apple devices (ipad, iphone). Currently I can only print through wireless connection which is 'moody' - doesn't print at times.
    Regards
    Rahul

    Hi,
    It supports AirPrint as shown:
        http://support.apple.com/kb/ht4356
    Please read on the first page of the above link:
    How to print in iOS
    You can print from Apple apps like Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, and more. Many apps available from the App Store also offer this feature.
    To print, follow these steps:
    Tap  or  at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Make sure that you are on the same network as the AirPrint printer that you want to use. All AirPrint-enabled printers on the same network should be displayed, including those that are properly configured for a Wide Area Network (WAN).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

    HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10).
    I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection)
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02847467#N2251
    All I get under printers is the USB kind and NOT the Wireless/Bonjour kind.
    Can anyone help me out?
    Thanks.  

    Hi @Random_Pelican ,
    I see that you are having issues setting up the printer on 10.10. I would like to help you out today.
    If the printer has a valid IPv4 address and you still can't add the printer as a Bonjour printer, most likely Multicasting is turned off on the router, since your not able to add the printer as a bonjour device and the other devices won't recognize the printer. Just call the router company and have them turn it on.
    If the printer doesn't have a valid IPv4 address please try these steps:
    Reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    I will provide the steps for 10.9, which should work the same for 10.10.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
    Laserjet P1102w.
    You may follow the steps instead of watching the video.
    You have to connect the USB cable from the printer to the computer to install the printer as a USB device first and then configure the wireless network.
    Turn the printer on, connect the USB cable and install the Apple Update that should automatically load.
    Then go to the Apple, System Preferences, Printers and Scanners.
    Highlight the Laserjet on the left side of the window.
    Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button.
    The Embedded Web Server for the printer will open.
    Click on the Networking tab, select Wireless on the left side.
    Fill out this information for your network. Status make sure you select Enabled.
    Apply the settings.
    Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
    Delete the USB printer from the list from the Printers and Scanners window.
    Disconnect the USB cable.
    Test the printer.
    Let me know how you make out.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

    Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver  http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

    Hey , Welcome to the HP Support Forums!
    I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below.  If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now.  Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall.  5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall.   Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step.   Step 2: Clear Temp Files:  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step.    Step 3: Download Installer Package:  Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window.  You do not want to run the installation at this time.   Step 4: Run Scrubber:  To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer.  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller.    Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to.    Step 5: Check Print Server Properties:  Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step.  Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step.    Step 7: Run CCLeaner:  To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step.    Step 8: Install Device:  Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to  Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

  • LaserJet Pro M1536dnf MFP ToolboxFX, cannot connect to the device

    Hi , I see you have put a great deal of effort into getting the ToolboxFX to work again, I'd be happy to help you with this. I found a post written by a colleague that I think might help. Please take a look at what  suggested to another user: Toolbox FX error. Please let me know if this helps, or if you require further assistance. Thanks.

    Hello, I am new to HP Forums.
    I have tried to search these forums for a working solution for my issue, without success.
    I apologize if I have provided too much information all at once. I see many people seem to have problems with the HP ToolboxFX software. Thanks to anyone that can help me solve my current issue. Product: HP LaserJet Pro M1536dnf MFP
    Model: CE538A
    Firmware Date: 20140630 (was 20100615) Computer: Dell OptiPlex 980 Mini-Tower
    OS: Microsoft Windows 7 Ultimate 64-bit SP1
    RAM: 8GB Background: ****
    We have a small quantity (4 via USB, 2 via wired Ethernet) of this model AIO printer in use here since 2010. I have never had any problems printing to or scanning from these printers. The HP ToolboxFX software DID function on my PC without issue until it was recently uninstalled.
    I have never tested the Faxing function of the printer connected to my PC, so I don’t know if that part of it works. The fax function does work on another (same model) printer installed on our network. Originally this printer was connected to my PC via the supplied USB cable and installed using the supplied HP software media (Installer v1.5.6.4020  I believe).
    My PC had a couple USB ports that did not work, and during the troubleshooting process, a second copy of this printer became installed and linked to a different USB port. I wanted to see if I could have HP ToolboxFX deliver faxes received on one of our networked HP LaserJet Pro M1536dnf MFP printers to my PC instead of another PC currently receiving these faxes. So I thought I would uninstall the printer and software on my PC and reinstall it using the updated software (Installer v3.0.3.5253) downloaded from the HP website. That is when my problems started. Problem: ****
    HP ToolboxFX seems to be running in the system tray, but when I right click the system tray icon and select “Open HP ToolboxFX”, I receive a popup error window. By the way, the printers name no longer appears in the right click context menu. **** Window content:
    Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ]  <---<<  Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. I can still print to and scan from this printer. It is only the HP ToolboxFX software that is not working. What I have tried to resolve problem: ****  o- I have tried uninstalling and then reinstalling the printer and software (Installer v3.0.3.5253), using USB.  Same “Cannot connect to the device” window. 
    o- Thinking the newer software might need newer firmware installed on the printer, I ran the “Firmware Update Utility” found on the HP website. Firmware version 20140630 successfully installed. 
    o- I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB.  Same “Cannot connect to the device” window. 
    o- Thinking the perhaps the newer software was the problem, I uninstalled (Installer v3.0.3.5253) and then reinstalled (Installer v1.5.6.4020, original working) the printer and software using USB.  Same “Cannot connect to the device” window. 
    o- Then I uninstalled (Installer v1.5.6.4020) and then reinstalled (Installer v3.0.3.5253) the printer and software using USB.  Same “Cannot connect to the device” window. 
    o- Wondering if this was a USB software issue, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using wired Ethernet.  Still no problems printing or scanning. Could now access the printer using its IP address, but the HP ToolboxFX error changed.  Now the popup window contained a different error. **** Window content: HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC.  You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
    HP ToolboxFX version: 006.015.01163 [ OK ]  <---<<  Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears. 
    o- As this was not helpful, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB again.  Still no problems printing or scanning, but the HP ToolboxFX error remained the same.  The popup window still contained the following error. **** Window content:
    HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC.  You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
    HP ToolboxFX version: 006.015.01163 [ OK ]  <---<<  Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears. 
    o- I then tried a forum posted claimed solution (follows).  This did not resolve my ToolboxFX problem but did reset the error window content and software functioning back to its original non-working state. Now I am back at square one. Printer still works but cannot use ToolboxFX at all. Posted claimed solution START: ****
    From pcwizard on  08-03-2012 08:52 AM
    Re: LaserJet M1536 ToolboxFX error Hi Maddie54, Try the following and see if it works for you;
    o- Please go to the following directory  C:\ProgramData\Hewlett-Packard\ToolboxFX\Settings
    o- Under this directory delete all the files in Settings folder.
    o- Then reboot pc and restart the printer. *This can occur when the IP has changed or the printer had lost communication and been re-connected. I am an HP employee.Posted claimed solution END: **** **** Window content:
    Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ]  <---<<  Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. 
    *-*-*-*-*- I noticed that the HP uninstall process leaves a large quantity of abandoned folders and files scattered on the file system. I can only imagine that it has done something similar to the registry files. I can only imagine that since I know ToolboxFX works on other PC’s and DID work on mine, at one time, there must be a way to get it to work again. Perhaps there is a better uninstall utility (or manual procedure) that can remove whatever is causing the ToolboxFX software to not work. I hope someone has some useful insight into this problem. Would be nice to use the HP ToolboxFX software to receive faxes from one of our networked printers.
    Thank you very much for your assistance.
    Paul 

  • Laserjet Pro M1536dnf MFP - scanner not working

    I have just bought and installed an HP Laserjet Pro 1536dnf MFP. The copier and printer work, but I can't get the scanner to work. I have downloaded the software several times and triedn to install it, but it doesn't work. In the end it times out and says there is a 'fatal error'.
    Any ideas? The printer didn't come with a USN cable, so I am using the one from my previous HP printer. Do you think that could be part of the problem?

    Hi Watu-Na-Nuru,
    Thank you for providing that information.
    There should have been the 2 drivers listed. Not sure why it wasn't listed.
    How was the scanner listed in the device manager under imaging devices?
    I have provided some steps for totally removing the old printer software, so we can start over again.
    Disconnect the USB cable if you are using the USB connection and not a Ethernet connection.
    Remove Old Printer Drivers.
    I believe there is a scrubber on the CD to remove all the printer files.
    Open the files on the CD/utility folder/scrubber.
    Unregister and reregister Microsoft Windows Installer
    Click Start (), and then click Run.
    In the Open box, type msiexec / unregister, and then click OK.
    Click Start and then click Run.
    In the Open box, type msiexec / regserver, and then click OK.
    Reinstall the software again on a new account with Admin Rights.
    Create a new user account with Admin rights.
    How to create a new user account in Windows 7 and Windows Vista.
    If the issue persists, run the Microsoft Fix It Tool.
    Fix problems that programs cannot be installed or uninstalled.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, let me know.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro M1536dnf Multifunction Printers - A 'Firmware Corrupt Ready 2 Download'

    LaserJet Pro M1536dnf Multifunction Printers - A 'Firmware Corrupt Ready 2 Download'
    I run firmware files named that M1530_Series_FW_Update-20120629 file from network in Win.7 Then Firmware Corrupt Ready 2 Download is appeared. All operation blocked, pls help?

    How was the printer connected to the computer? USB or networked?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out

    LaserJet Pro M1536dnf trouble sending fax...just says fax job added but does not send out.  How do I repair?
    Thanks!

    Hi @LWest322 ,
    I see that you are having issues with the fax not sending the fax. I can help you.
    The settings would be under the Fax Menu button, Send Options, Send Fax Later.
    I don't believe there is a option though to turn it off or on, just to set the date and time.
    I can send you the reset for the printer in a private message, which resolve this issue.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet pro p1606dm with yosemite with usb wont print but printed on a network

    hp laserjet pro p1606dm with Mac Yosemite using a USB wont print. Printed however when used on a network. Downloaded a driver again, though driver already installed. Driver was a dmg file and wouldn't open. Forum told me to use Safari to open a dmg file but that didn't work. Help! Want to use the printer at home that I was using at the office.

    Hi @soneighbor ,
    I understand that you are having issues printing from a USB connection, but you were able to print by a Wired Network connection. I will certainly do my best to help you.
    The drivers for 10.8 are installed by the Apple Updates.
    Once the printer is connected by a USB cable directly to the Mac, you should be able to just run the Apple Updates to install the drivers automatically. Installing a Mac Printer Driver Using Apple Software Update.
    Delete any of the older drivers first.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet P1606dn)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Try printing again.
    If you run into any issue, please do the following:
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try printing again.
    If you are still having any issues, download and install the HP Printer Drivers v3.0 for OS X.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I'm trying to print  an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape.  That is I change it in printer settings but no use.

    I'm trying to print an Ancestry document from an iPad 2 using air print.  The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format.  I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

  • Can't find my printer using Air print

    Can't find my HP Photosmart C4783 printer in iphone using Air print
    Can anybody help please

    iOS printing works to printers that support AirPrint. Right now only HP has AirPrint printers on the market. There are 18 of these printers:
    http://support.apple.com/kb/ht4356
    According to MacWorld:
    http://www.macworld.com/article/155674/2010/11/airprinters.html
    other printer makers are looking at making these printers.
    As to commonly purchased printers:
    http://www.zdnet.com/blog/btl/hp-grabs-printer-market-share/38724

  • I canot use air print or dont know how to from my iphone 4s

    i canot use air print or dont know how to from my iphone 4s

    http://www.apple.com/support/iphone/assistant/airprint/

  • Why cant i use air print with my hp deskjet 3050

    why cant i use air print with my hp deskjet 3050

    The HP Deskjet 3050A J611 is AirPrint compatible.
    If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.

  • Laserjet Pro 1606dn wireless option compatible hardware accessory

    Dear Sir/s,
    We have placed order for HP Laserjet Pro 1606 dn alongwith  wireless option compatible hardware accessory on Authorised Supplier in Mumbai,India.Pl confirm whether the vendor should provide  TP-LINK TL-WN7200ND , a 150Mbps high power wireless adapter for connectivity .We want secure  wirless  network WPS,WPA Option to match with the printer HP Laserjet Pro 1606 dn.Suggest compatible wireless option hardware accessory.
    Thanks
    Regards

    Hi,
    Wireless optionality is available with the HP Jetdirect ew2500 802.11b/g Wireless Print Server (J8021A), that can be found listed within the Supplies and Accessories section below:
    http://www8.hp.com/emea_middle_east/en/products/printers/product-detail.html?oid=4346029&jumpid=oc_r...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for