Hp laserjet pro mfp m125-m126 pclmS, x86 driver. operation could not be conplited

unable to install hp laserjet pro mfp m125-m126 pclmS, x86 driver. operation could not be conplited

@Shartpay
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

Color Laserjet Pro MFP M177fw - stuck on initializing - fresh new printer not working

http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Pro-MFP-M177fw-stuck-on-initializing/m-p/5097731/highlight/false#M194928 ==QTE==Two days ago I received my printer (same as in this thread) and I am experiencing the exact same problems which are described throughout this thread. The printer is stuck on initializing and makes continuous loud noises. Please let me know how this can be taken care of. I would either need to replace this product, or to have it fixed somehow. Await yours soonest.==UNQTE== ++ Ref to the question from the above thread, I also post it here as a new question just to ensure that I get a response. Thanks beforehand and look forward to hearing from you. BrgdsErik

Hi @SSAB ,
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
What happened prior to this issue? (update, paper jam, changed toner)
I would do a hard reset if you haven't tried this method.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scanning hp laserjet pro mfp m125nw macos 10.9.4

Hi guys!
I've just bought a new hp laserjet pro mfp m125nw and I can't scan from the HP Utility tool. Although there are no problems to scan from the Preview prog as well as from scanner program from Printers&Scans (in Sys. preferences).
Thank you for your help!
Here is the error message:
rocess: HP Utility [543]
Path: /Library/Printers/hp/Utilities/HP Utility.app/Contents/MacOS/HP Utility
Identifier: com.hp.printerutility
Version: 5.17.0 (5.17.0.1257)
Build Info: Unknown-1257~1257
Code Type: X86-64 (Native)
Parent Process: launchd [142]
Responsible: HP Utility [543]
User ID: 501
Date/Time: 2014-09-10 10:59:02.231 +0200
OS Version: Mac OS X 10.9.4 (13E28)
Report Version: 11
Anonymous UUID: A158FA0E-7211-6609-FBAE-F7D91A0DB9D0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000050
VM Regions Near 0x50:
-->
__TEXT 0000000100000000-000000010003f000 [ 252K] r-x/rwx SM=COW /Library/Printers/hp/Utilities/HP Utility.app/Contents/MacOS/HP Utility
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libdispatch.dylib 0x00007fff8ae56eeb dispatch_async_f + 3
1 com.hp.utility.ScanShortcutsManager 0x000000010aa8512f 0x10aa82000 + 12591
2 com.hp.utility.ScanShortcutsManager 0x000000010aa846c9 0x10aa82000 + 9929
3 com.hp.printerutility 0x0000000100011a40 0x100000000 + 72256
4 com.hp.printerutility 0x000000010000d3ef 0x100000000 + 54255
5 com.hp.printerutility 0x0000000100015de4 0x100000000 + 89572
6 com.apple.AppKit 0x00007fff8cd19a58 -[NSWindow sendEvent:] + 11296
7 com.apple.AppKit 0x00007fff8ccb85d4 -[NSApplication sendEvent:] + 2021
8 com.apple.AppKit 0x00007fff8cb089f9 -[NSApplication run] + 646
9 com.apple.AppKit 0x00007fff8caf3783 NSApplicationMain + 940
10 com.hp.printerutility 0x0000000100001d28 0x100000000 + 7464
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff97066662 kevent64 + 10
1 libdispatch.dylib 0x00007fff8ae56421 _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff8ae56136 _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib 0x00007fff97061a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff97060d18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff93e7cf15 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff93e7c539 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff93e7be75 CFRunLoopRunSpecific + 309
5 com.apple.Foundation 0x00007fff8baa3adc -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
6 com.apple.Foundation 0x00007fff8bb8c4aa -[NSRunLoop(NSRunLoop) run] + 74
7 com.hp.printerutility 0x00000001000262f0 0x100000000 + 156400
8 com.apple.Foundation 0x00007fff8baa176b __NSThread__main__ + 1318
9 libsystem_pthread.dylib 0x00007fff8e10d899 _pthread_body + 138
10 libsystem_pthread.dylib 0x00007fff8e10d72a _pthread_start + 137
11 libsystem_pthread.dylib 0x00007fff8e111fc9 thread_start + 13
Thread 3:
0 libsystem_kernel.dylib 0x00007fff97061a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff97060d18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff93e7cf15 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff93e7c539 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff93e7be75 CFRunLoopRunSpecific + 309
5 com.apple.Foundation 0x00007fff8baa3adc -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
6 com.hp.printerutility.selection.dmf 0x0000000100cc93b1 0x100cc3000 + 25521
7 com.apple.Foundation 0x00007fff8baa176b __NSThread__main__ + 1318
8 libsystem_pthread.dylib 0x00007fff8e10d899 _pthread_body + 138
9 libsystem_pthread.dylib 0x00007fff8e10d72a _pthread_start + 137
10 libsystem_pthread.dylib 0x00007fff8e111fc9 thread_start + 13

Hi @Lorenzetti,
I see that you are having issues scanning from the HP Utility tool. I can help you with this today.
Did you download and install the drivers?
HP LaserJet Pro MFP M125/M126/M127/M128 Series Software.
Can you scan from the HP Scan Software?
How to Scan: OS X v10.9.
Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name shows Airprint, then that is the Apple drivers. Delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Try again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro MFP M125a not printing

Hi,
my relatively new LaserJet PRO MFP M125a stopped printing today. Scan function is still working. All lights are on. Cannot print test page. When I try to print Word or PDFdoc, spool is empty, no job is waiting.
Uninstaled all HP software and drivers, cleaned registry, installed it again. Nothing. Changed USB cable, it worked for few pages, then turned off. When I turned it on, problem is here again. Changed USB cable again, but no luck.
Windows is fresh, new HP drivers...
Help is needed.
Best regards,
Nikola

Hi @MaletaBG,
I would like to help you with getting the printer, printing again.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
HP Color LaserJet Pro MFP M176n Printer, and HP LaserJet Pro MFP M125, M126, M127fn, M128fn, and M12...
Please try the steps in this document to see if it will help resolve this issue.
HP LaserJet Printers - 'Printer is offline' Message Displays on the Computer and the HP Printer Will...
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro MFP m125nw Scan Software for Windows XP

Hello,
May I kindly ask if there is a download location for the HP Scan Software for the HP LaserJet Pro MFP m125nw as the unit didn't come with a CD.
On the product page there is a driver listed for Windows XP, but the actual Software is not available for download.
Product Page:
http://support.hp.com/es-es/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/solutions
Product manual:
http://h10032.www1.hp.com/ctg/Manual/c03628466
Many thanks.
Best regards,
Ryan
This question was solved.
View Solution.

Hi Ryan,
Downlaod and install the full feature software below, that include the HP Scan software as part of the package:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-124819-4&cc=us&dlc=en&lc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet PRO MFP M125nw; Wireless Driver installation problem in Win 8.1

Product name : HP Laserjet PRO MFP M125nw, product nr CZ173A
US Operating system: Dual Boot:   Win Vista home premium (32 bit) / Win 8.1 pro (32 bit)
The printer was installed under Vista in September 2014 and was and still is wireless printing and scanning without a problem.
Recently I tried to install the printer (wireless) under Win 8.1 and I downloaded the latest Full Feature software from HP.nl.
During installation the software installation package could not find the printer and installation was aborted.
I ran the printer self test / Configuration. The network Info and product info sheets were without errors. A ping to the IP address of the printer was without a loss. The firewall indicated that HP software is accepted.
Off course I read everything on HP about this problem I followed every advice and repeatedly gave it a try. I even installed the usb cable solution ( USB was working ok) followed by your change connection instructions, but all in vain.
To my surprise HP was able to find my printer when I checked on http:// www.hp.com/cgi-bin/hpsupport/index.pl. However the printer was found in my local network as a HP Laserjet Pro M1132 multifunctional printer with product nr stars 3NW-01 which is not correct, however the found serie nr. of CNB7G3RC78 was correct.
The print and scan doctor made some changes to the software and after that I was able to print wirelessly, however the Scan doctor button did not react at all and using the program was not possible further. Starting the program again gave the same result.
Conclusion:       In Vista: HP wireless print and HP wireless Scan is working fine
                        In Win 8.1: HP wireless print is OK, HP wireless Scan cannot be installed !????
                        In Win 8.1: Windows Printer driver and Win Fax& Scan driver both wireless working ok
Remark: Reading the display is difficult in dim lit areas. The on / off button is brightly lit and this light should be used to enlighten the display instead.
A solution for the scanning problem would be appreciated.
Kind regards
JWAH

Hi @JWAH , and welcome to the HP Forums!
I understand you're experiencing driver issues. I'd like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP LaserJet Pro MFP M125/126 Series Full Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Color LaserJet Pro MFP M177fw don't go to sleep mode

Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

Hi Denis88,
I see by your post that the printer isn't going into sleep mode.
I can help you with this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I would update the printer's firmware if the printer won't go into sleep mode.
HP Color LaserJet Pro MFP M177fw Drivers.
Select your operating system, click next, click the link for firmware.
I have provided some information from the manual for the sleep mode that you can check out.
COLOR LASERJET PRO MFP.
EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
Printer Settings Auto-off Configure the product to automatically turn off after a period of
inactivity. You can adjust the number of minutes after which the product turns off.
Touchscreen control panel:
1. From the Home screen on the product control panel, touch the Setup button.
2. Open the following menus:
System Setup
Energy Settings
Sleep/Auto Off After
3. Select the time for the Sleep/Auto Off delay.
NOTE: The default value is 15 Minutes.
4. The product automatically wakes when it receives jobs or when you touch the screen on the product
control panel.
You can change which events cause the product to wake. Open the following menus:
System Setup
Energy Settings
Wake/Auto On Events
To turn off a wake event, select the event, and then select the No option.
Hope this helps resolve your issue.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro MFP M12fn, printing a solid black line on every paper

I'm running windows 7 professional. I haven't received any error messages and nothing out of the oridarny has happened. My printer/scanner/fax/copy (My HP Laserjet Pro MFP M12fn, product # CZ181A) is printing with a black line down the entire paper, but its only doing it thru the feeder and not on the glass. HELP, How can I fix this?

Welcome to the HP Forums angelinaOO7,
I read your post, which indicates that you are getting a black line down the page when using the feeder. You can print fine from the glass. I can help you with this.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Clean the scanning glass and platen.
Turn the printer off.
Disconnect the power cord from the product and the wall outlet.
Open the scanner lid.
Clean the following scanner areas with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
Main scanner glass.
Small scanner glass to the left of the main scanner glass.
White plastic backing.
Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting.
Plug the power cord into the product and the wall outlet.
Turn the printer on.
Try to make another copy.
If you are still having issues, then update the printer's firmware.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro MFP M127fn - How to turn off T.30 Trace Reports

After every fax received the unit prints a "T.30 Trace" report. Needless to say, this is a big waste of paper. Have gone into the Reports setup and changed the settings accordingly, but am still getting this report after every fax we receive. We are using the unit as a fax machine/copier only, so it's only connected to a phone line and power source. How can I turn off these unwanted reports? Thanks for any assistance you can give.

Hi @mrinn ,
I see that you are having issues with the T.30 Trace Reports printing, you have already turned off the setting and the printer is still printing them off. I would like to help you out with this issue today.
Just double check the setting, to make sure it is still turned off.
Go to Setup, Service, T.30 Trace.
You could update the printer's firmware, but the printer would have to be setup on a computer to do this.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
I can send you a reset for the printer in a private message. But it will set the printer back to factory settings and clear out the phone book. In the forum beside your handle name just click on the envelope to view it.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro MFP M435nw

Dear sir,
I'am seenu working in system administrator for myproptree foundation pvt ltd. hp printer model number:HP LaserJet Pro MFP M435nw
Problem issue:
-scan option email option not working
-outlook mail config smtp problem not config
- A3 printout slow printer for this product
please help for this product.
Thanks & Regards,
Seenu-IT System administrator
[edited phone by moderator]

You need to clarify (preferably by showing an example) just what you mean by "... on paper i have bad fonts ...".
Also give details of the source document application (e.g. Word, Paint, etc.), and which printer driver you are using.

HP Color LaserJet Pro MFP M177fw doesn't print under user account. Windows 7 Pro x86

Dear Sirs,
We found a bug using HP CLJ Pro MFP M177fw on windows 7 pro 32-bit edition.
In our company we use custom folder to keep temporary files of all user accounts. It is C:\temp. So in the environment variables window we have user variables TEMP and TMP with the C:\temp path. System variables TEMP/TMP are the same.
After installing MFP's driver, under accounts with administrator rights we can print normally. But when we use account with user rights print doesn't work. Trying to print windows test page, we receive error message "Test page failed to print" and spooler state is clean. When we change user variables TEMP/TMP on default %USERPROFILE%\AppData\Local\Temp, we can print testpage successfully.
With older model HP CLJ Pro MFP M175 we have no trouble at our customized operating systems.
Can we hope on fixing print driver with regard to this problem?
Regards,
Evgeniy [edited personal information by moderator]

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP COLOR LASERJET Pro MFP M176n

Hello
Is the printer HP COLOR LASERJET Pro MFP M176n PCL5/PCL6 compliant?
I searched in the HP website and it says PCLm/PCLmS in one link and PCL 3 GUI in another link.
Also advise what is PCLm/PCLmS?
PCL 3 GUI :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03894363&lc=en&jumpid=reg_r1002_us...
PCLm/PCLmS:
http://www8.hp.com/in/en/products/printers/product-detail.html?oid=5303442#!tab=specs
Please advise which is the correct one.
Thanks
Subbu

No idea which is the correct specification.
But none of those Page Description Languages are compatible with PCL5 or PCL6 (a.k.a PCL XL).
I can't be certain, since (unlike with PCL5 and PCL6) HP does not appear to publish specifications of these PDLs, but as far as I'm aware:
PCL3 GUI is a raster-based language; I believe that the drivers basically generate encapsulated, compressed, PCL-format raster images of each page; the printer unencapsulates and uncompresses these, and then just prints the resultant dots. I suspect that the language does support a very limited set of PCL escape sequences, to select job-level characteristics (such as page size, orientation, plex mode, etc.), but doesn't support anything to do with text formatting.
PCLm and PCLmS also appear to be raster-based, but in this case the raster images are encapsulated within a Portable Document Format (PDF) wrapper.

LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB. Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake. Windows 7 detects the printer, and in-fact installed the drivers for it automatically. However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
I have tried multiple USB ports and it's the same issue. I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer. The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer. If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver.
Anyone have some sort of idea regarding this issue?

Hi @KP_ ,
I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
Disconnect the USB cable.
Uninstall the software.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
HP LaserJet Full Feature Software and Driver.
Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
Test the printer.
Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro mfp m125-m126 pclmS, x86 driver. operation could not be conplited

Similar Messages

Maybe you are looking for