HP Laserjet Pro P1102w software update not available?

I recently purchased an HP LaserJet Pro P110w which advertises AirPrint capability. Apparently there is not specific OS X 10.8 support for this printer? My specific problem is that when i go to add the printer to my network, I get a box during setup that says "Software is available from Apple" it then attempts to download said software, but then I get a box that says Software Not available.
Any suggestions? I've seen some "solutions" involving this printer but I can't get any further than above. This occurs whether I attach it to my macbook pro via USB or to my Time Capsule.
It also has the latest firmware. In fact when I tried to use the enclosed CD, it says my printer has new firmware that what is available on the CD.
HP's website is useless, at least I can't find help.
I'm hoping that my fellow macophiles can help!
Thanks!

If you connect the printer to the network, you won't need to install any software. If you're connecting it via USB, follow these instructions:
OS X Mountain Lion: Reset the printing system

Similar Messages

  • My phone is saying "software update not available at this time" - is anyone else seeing this?

    my phone is saying "software update not available at this time" - is anyone else seeing this?

    With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

  • Software updates not available

    I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
    Anyone have this issue?... Is there any procedure for this?
    Thanks,
    Al

    Alanders wrote:
    I downloaded the new IOS 7 via Wi-Fi
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • LaserJet Pro MFP M225dw driver not available for Mac OS10.4.11

    I can print by connecting the printer to the computer with USB connector. But without the driver, the printer is seen by the computer as a generic postscript printer; and the printer's special attributes such as 2-sided printing is not made available. Is there any alternative driver that may be used for this combination, please?

    Hi @ayame ,
    I see by your post that you are looking for the drivers for 10.4.11. I would like to help.
    Unfortunately the only drivers available from HP are from 10.7 and higher.
    HP LaserJet Pro MFP M225dw Drivers.
    You have to update the Mac to use the Full HP Software drivers.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Software update not available at this time

    When installing my iOS 7 it says that the update is not available at this time. I have it fully downloaded and I just press install and it gives me this error. Any ideas?

    The error is not a failure to download.  Once downloaded, you hit the "Install" button, agree to the terms and conditions, and the phone begins verifying the update.  After about a minute or two of attemting to verify, this error comes up:
    "Software Update Unavailable: Software Update is not available at this time.  Try again later."
    That's my experience at least.

  • SharePoint Server 2013 farm software updates not available in SCCM

    At my current customer, we are currently switching over to SCCM for all Software Update Management.
    For now, the only issue we are experiencing is that we do not receive SharePoint updates on our SharePoint Server 2013 farm. With WSUS we can detect these, but they are not listed in SCCM. We sync directly with Windows Update.
    It are specifically the updates that are marked as "farm-deployment", as you can see in example in this image.:
    http://2.bp.blogspot.com/-gI8Ew7RlY0g/VPqM0QUn6oI/AAAAAAAAIDQ/S1Ufp0x-mSU/s1600/windows%2Bupdate%2Bincludes%2Bsharepoint%2B2013%2Bpatches.png
    In the SUP properties, we have enabled the Office 2013 product and all classifications besides "Tools".
    Am I missing something?

    I could see these SharePoint updates in my SCCM console.
    N.B. the question was about "farm-deployment" updates specifically.
    Can you please post a screen-shot showing these updates in the SCCM-console?
    This is from WSUS:
    Rolf Lidvall, Swedish Radio (Ltd)

  • Software update not available when roaming?

    I have been waiting for ICS long enough.. Now I'm on international roaming and connected to a wifi source, but the 'system updates' option on my phone is gray and not available. Is it possible to update while roaming? Don't want to wait until I return to the US... thanks!

        Hello creambear! I have great news for you! The ICS update has started effective 6/22. The process takes 3 - 4 weeks to complete and is being released in stages. If you are one of the lucky ones to get it sooner than later then it can be downloaded and installed via wifi. As usual, you will receive an alert on your phone advising that it is available for you, assuming you are connected to a data network at the time. If you have any additional questions for me then don't hesitate to reply to this message. Thank you. ^AH

  • Why is software update not available

    I am trying to update the OS on my mother in law's iPad and it keeps saying its not available after trying for quite so e time - 5-10 minutes

    This is simply because Apple's verification server(s) is getting slammed today.  It's going to be a matter of "just keep trying" until you can get through.
    It took me several tries to get the download going, and now that the dowload is complete, I'm in the same boat getting it installed.  We'll just have to be patient, as I'm sure there are a million people trying to get through at the same time.

  • HT4623 why is a software update not available for ipad 1 stuck on ios 5

    being laft behind with software updates with
    the ipad1 on ios 5 are there any updates available help please

    No, hardware limitation.
    Old iPad: 256MB RAM
    New iPad: 1GB RAM

  • Software update not available?

    I know that there is not a new software update yet, but when I go to check new, I get an error. It tells me service unavailable. Before the outage it would tell me no new updates. Anyone else having this issue? I am getting 4G.  

    Doesn't matter if it works or not.... I got this from HTC this morning
    HTC
    "Unfortunately Gary, we are still investigating the issues that have been reported with the HTC Thunderbolt and we do not have an ETA on a fix or update to resolve these issues. Once we have developed an update or fix for these issues. It will be announced on our website. I recommend that you continue to check our website for any updates or fixes for your HTC Thunderbolt".
    WEAK....

  • Driver/Software Updates Not Available

    While attempting to locate and update my drivers, I can successfully find the HP update page for my specific product but when clicking on the 'Software and driver results page' the message is:, "We were unable to find any drivers for your product. Drivers may be in development so please check back at a later date or visit the product homepage." Visiting the homepage link is of no help. In the past I have successfully located the various updates for my product  but recently I see nothing is available. Specifically, I am attempting to determine if my BIOS is up to date. Will this update page ever return?

    Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about two days now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. I know the problem has been reported, but I don't know how long this is going to take to fix. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately. 

  • Software Updates not available without CC

    I have a two month old Mac mini with OS 10.8.3. App Store shows updates for Server, iPhoto, and iMovie, but they all require a credit card. All these software items came with the system out of the box. I have never bought any software from Apple for it. How can I install updates without a credit card?
    To see what I am faced with:
    http://www.flickr.com/photos/36589940@N04/8966109940/sizes/k/
    Notice there is no option for "None" to get past this choice. It's either PayPal or a credit card.

    This is the info that I asked about in your first post about this issue so that I could understand what you were facing;
    https://discussions.apple.com/message/22177616
    First off; with the iLife apps; iPhoto, iMovie and GarageBand, did you accept them into your Mac App Store Apple ID when you first set up your new Mac? If not, have you used any of the three apps? If you didn't accept them into your account and you used any of them, they can not be updated as per the Terms of Use for these apps.
    As for the Server software, if your account does not offer the None option, then you will need to supply a bank card or redeem a small iTunes Gift Card to progress any further with your account.
    If you wish "official" confirmation, check with the respective stores for your account;
    iTunes Support -
    http://www.apple.com/support/itunes/
    Mac App Store Support -
    http://www.apple.com/support/mac/app-store/

  • Nokia X6 software update not available

    Hello.
    I can't update my phone to the newest software still. I'm from Croatia. What's wrong?
    Thx for the answer.

    Hi Picards Tea,
    Are you talking about the latest software release for your Nokia X6  40.0.002?  It's the latest and it's available in Croatia.  You can update your phone with Nokia suite.
    Pfrancoise.
    If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

  • Why is the software update not available in the App Store?

    I've been trying for over an hour to update to the 4.3 software and it keeps timing out.  I've disabled my AV software and I tried connecting directly to my LAN.  Nothing is working and I'm ready to throw this POS in the garbage.  This is the only issue I have with the phone, but it's really irritating. It must be fixed.

    http://support.apple.com/kb/TS3125
    http://www.apple.com/feedback/iphone.html

  • HP Laserjet Pro P1102W not printing even though it's installed...

    Hello everyone. I'm relatively new to Arch, especially new with configuring cups. I just bought an HP LaserJet Pro p1102w wireless printer. I set it up on my dads laptop via plugging it into the usb and it automatically ran the setup program and I selected to set the printer up for wifi printing. All went well and the printer works now wirelessly from his computer (Windows 7). I've been working at getting this printer to actually print without error but it refuses.
    I'm trying to print from leafpad, just a simple text file with little in it other than "linux test print" in the file. The print queue states "Processing - Not connected?" then it fails and gives me the option to "diagnose" the issue. So I click Diagnose. Then it pops up with a message stating that the "print server not exporting printers". It tells me to enable  the "Publish shared printers connected to this system" through the printing administration panel which is in Gnome apparenetly (I'm in XFCE) under System>Administration>Printing from the main menu. In XFCE there is no such area.
    I have cups version 1.5.0-1
    hplip 3.11.7-2
    What else should I do? Apparently the printer was installed successfully. I tried installing it and selecting the HPlip driver which installed fine but wouldn't print. Then I removed that one and installed it using the Apple driver (airprint?) and it won't print either.
    I've tried searching for help but all I find is that it will work with hiplip installed... It isn't working with that installed.
    I can't access the cups server via a browser. Is that the problem? I've opened the cups config page but I don't understand it and it says allow,deny under localhost or ugh i dont know, something about which users can access the server. Should I remove the "deny"??
    Please help me if you can. I'm totally lost and have no idea what to do to get this printer working on my installation of arch. Arch is fully updated as of a few days ago.
    Any help would be greatly appreciated. Thank you.
    -Brittany

    I can't access the cups server via a browser. Is that the problem?
    Absolutely.
        If you are starting cupsd from DAEMONS in rc.conf is it starting correctly or failing?   If your not you should be.  if it failing does start manually work?   
    if it's running you should be able to access via browser.  localhost:631   
    also see/try
    $ hp-toolbox
    CUPS interface better option IMO tho.
    EDIT spelling.... to much scotch B4 posting
    Last edited by jwbirdsong (2011-10-20 00:42:38)

Maybe you are looking for