HP LaserPro 200 color m252 nW

What choices to make on special pages subpage of m 251 PCL6 printing preferences
WIN 8.1 using Student Word 2010
Set up for booklet printing & duplex
What setup required to have printer:
ask to insert cover stock in manual feed tray, have it print the cover followed by remainder of book
then ask for cover and proceed to print next copy

@Artierose
I am not really sure I understand your question but I will try...
If your manual feed tray is open, then the print job will always print from there. So if you are wanting to print the special paper (card stock) first, then use the manual feed tray and print all of it from there.
Then print the rest of the print job from tray 2 as a seperate job request. However this print job won't print until you close the manual feed tray.
However, if you want to print the whole job at the same time...special paper (manual feed tray) > regualer paper (tray 2). You will have to open the manual feed tray and feed your special paper in, then close your manual feed tray and let the rest of the job print from tray 2.
Does this make sense?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

Loading the laserjet pro 200 color m251 nw one sheet at a time?

How are you supposed to load the laserjet pro 200 color m251 nw one sheet at a time?

Hi Choffman,
Thank you for visiting the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

LaserJet Pro 200 color mfp m276 Printing issues

I have had this printer for about a year now. Now it has started printing solid black lines across the page I am printing, whether it be from my computer or a fax. I can run the cleaning process from the printer and its fine for a few hours and then back to the solid black lines. It gets so bad there is more ink on the paper than white when it does this. Have tried everything I can think of to cure this to no avail. I am running hp cartridges and just plain white paper. Any ideas as to how to fix this. These lines are thick lines, just not _____ but are about 1 " wide each.
I really need help with this really soon or I will have to replace it with another brand. I use this in my office and can't have important faxes coming across with all these lines so I can't read it. I posted this Saturday and still waiting for someone to respond.

Hi @RandallRaley ,
I understand that when printing, you are getting solid black lines across the paper and now on the back of the paper. You are using HP cartridges, plain paper and have ran the cleanings with the same result. I can help you today.
Try another type of 20lb -24lb plain paper to see if you have the same results.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
Select your operating system, click next, click the link for firmware.
Try printing again.
If the issue persists, follow the steps for aligning and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue.
Troubleshooting Print Quality Issues.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you getting the black lines on the Hardware Self Tests also?
Where is the printer located? (on a desk, on a enclosed shelf in desk)
What kind of paper are you using?
What is the weight of the paper?
Was there any black on the toner?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color M251nw can't be detected on wired network

New LaserJet Pro 200 color M251nw connects to main computer and functions. Networked computer does not recognize the this new computer. Operating system is Windows XP.
IBM Printer 12 was the printer that was replaced. I used the same USB port that the previous printer was using. Some how the new HP is not being rcognized on the network and I cannot print from the 2nd computer which is connected by the network.
Marc

New LaserJet Pro 200 color M251nw connects to main computer and functions. Networked computer does not recognize the this new computer. Operating system is Windows XP.
IBM Printer 12 was the printer that was replaced. I used the same USB port that the previous printer was using. Some how the new HP is not being rcognized on the network and I cannot print from the 2nd computer which is connected by the network.
Marc

HP LaserJet Pro 200 Color MFP M276nw scan to mail with google.

hello,
i got a HP LaserJet Pro 200 Color MFP M276nw printer. and i want to use the scan to mail feature.
But when i am setting up my google account as head account where the printer should send the mails from it doesn't work. i don't get the scan's into my mail. does somebody got a user guide for me how it is done and with the settings i have to use?

Hi @dennieboy96 ,
I see by your post that you would like to setup the scan to email. I would like to help.
Are you trying to setup the scan to email from the printer or from the HP Software?
I have included both documents.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Fax Problem on HP laserjet 200 color MFP M276nw

HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?

Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw. The fax forwarding feature no longer will forward a fax.

I am using the HP LaserJet Pro 200 color MFP M276nw. Is it possible to forward the fax as a email instead of printing it out? The current fax forwarding feature only supports forwarding to another fax number but not email. If fax forwarding to email is not support, is there any other solution?
Albert

Hi @Albert1024 , I understand that you aren't able to forward the faxes. I can help you today.
You can only forward that faxes from the printer to the fax number.
Check to make sure the Fax Forwarding didn't get turned off and it is still showing the correct fax number.
1. From the Home screen, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Receive Options button.
4. Touch the Forward Fax button, and touch the On button.
5. Use the keypad to enter the fax-forwarding number, and then touch the OK button.
Turn off the Private Receive.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Private Receive button, and then touch the Off button.
Clear out the saved faxes, to make sure this isn't causing any issues.
Go to Setup on the printer, Services, Fax Service and select Clear Saved Faxes.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
If you are still having issues, we can try a full reset on the printer.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet 200 color M251nw color issue

hey ppl, new here. we have an HP 200 color M251nw that will only print black and white. Well using the black toner cartridge and not the others. I've checked the printer properties and all color sections seem enabled. I am going to try an updated driver to see if that'll help. Seems like a setting not turned on..??? Any help with this is appreciated.
-J

Hi @techie211 ,
I see by your post that you are not able to print in color. I can help you.
Run a calibration on the printer.
On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
Here is a screen shot.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Print Quality Page?
What are the Ink levels?
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Laserjet pro 200 color MFP M276nw

Im having an issue with the installation of the software and the scanning of the printer. When i try to do a full install it goes well up to the part where i have to reconnect to usb port to my computer, at that point the installation starts to go very, very slow. When it get to 99% it gives me a fatal error saying i have to restart my computor and do the process again. i have done it multiple times with no success. I followed by going online and getting the drivers from HP and did the installations individually. I am finally able to print. When i go to scan a documents i only get 3 options on the printer: scan to usb, scan to network and scan to wireless. I dont have anyother options and i have downloaded the drivers for the scanner. I dont know what to do anymore.
Thank you

Hi @HPuser84,
I will do my best to help you be able to scan with the Laserjet pro 200 color MFP M276nw printer.
There are only 3 options from the printer to scan to, scanning to PC isn't a option with this model, if you want to scan from the computer, you would have to use the HP Scan Software on the computer.
I have provided a document for how to scan through the HP Software and from the printer's control panel.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
If the scanning software and drivers still didn't fully install and you had the fatal error again, uninstall the software.
Disconnect the USB cable first. Uninstalling the Printer Software.
Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
A Fatal Error Displays During Software Installation. Disregard the printer model. This should allow the software to fully install properly.
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw - Printing problems with HPeprint App on Ipad mini

Hi,
my name is Domenico and I have the following problem:
I have setup my HP LaserJet Pro 200 color MFP M276nw in HPePrint App on my Ipad mini, but I am able to print directly.
When I send a page to print through my tablet, on the printer screen I can see the following message:
"Manual feed.
Plain, A4
Or press [OK] to use available media"
So, I have to press OK on the printer screen to print the page.
How can I avoid this problem?
Thanks,
Domenico

solved!!!
Domenico

Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Hi,
I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
Please let me know how to print the borderless print in A4 sheet.
Regards,
Jaya

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

My boyfriend and I set up the LaserJet 200 color MFP printer at home and installed the software on both our laptops. I have a Dell Inspiron 700m and he's got the Lenovo T400. I have been able to print any time from my laptop, but my boyfriend has only been able to print one document and after that there is a printer error and is not able to print nor troubleshoot. I uninstalled and re-installed the software one more time, and again, he was only able to print one document and after that, printer error again (does not specify error). Meanwhile, I continue to be able to print without a problem. Anything I may be overlooking? Any help will be appreciated.

What OS are you using?
Which of the LaserJet 200 series printers do you have? There are several in that series and I want to make sure I'm helping with the right one.
How is the printer connected to the computers?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to Print Envelopes - HP LaserJet Pro 200 color MFP

I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.
I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!

Hi goodgrandma ,
I see by your post that you would also like to know how to print envelopes.
I will be happy to help you.
Both the Laserjet m251 and M276 have a main tray only.
Above the tray is the jam access door to remove paper jams.
To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
What is the full name and product
number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276 - not able to print black when any color is empty

Hi,
We have 2x HP LaserJet Pro 200 color MFP M276n in our office, both have firmware date code 20121026.
The problem is that when ever one of the colored toner cartridges gets empty it fails to print even black & white documents and freezes in the replace cartridge screen.
In system supplies settings it is configured to print only black when colored supplies are below very low threshold limit.
Since the printer is freezing in the warning screen and only powering it off and on helps to bring it back alive, it seems that this is a software or firmware issue. I didnt find any firmware updates for this model though.
It doesnt make any sense that it is not possible to use the printer at all when only one of colored cartridges is empty. Any thoughts on how to solve this issue are welcome.

Hi,
The firmware that you have mentioned is old and the latest version available is
Version
20131216
it is always advisable to update the printer to the latest firmware. Please update the firmware form the given link
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-4&cc=us&dlc=en&lc=en...
Hope this helps....
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

HP LaserJet Pro 200 color MFP M276nw Wireless option is gone!!!

I have a HP LaserJet Pro 200 color MFP M276nw. The blue lit wireless icon used to stay on steady and all was fine for quite a while, then the Blue icon would start flashing like it lost it connection to the wireless router. I would just recycle the power on the printer and let it reboot. Usually it would connect with the router again but, it's been getting worse lately. I figured I would try to the latest firmware to the printer as maybe there was a clitch with the original firmware.........Well, now I get no blue wireless icon and the wireless menu disappeared from the touch screen. I tried to access the wireless settings in the web browser, the program said "this product does not support wireless connectivity.......WHAT?!!!!! I tried a "cold reset" on the printer to clear everything and still have no wireless option. I suppose its going to stick with the same firmware that was last installed. I did notice that the printer lists itself with an "N" at the end of the model # on any printed report instead of the "NW" its supposed to be. I did download the printer firmware from the Pro 200 color MFP M276nw support page. it's acting like it now has the firmware for the non-wireless version of this printer. This is the firmware I used
file name:
M276_colorMFP_Series_FW_Update-20140521.exe [1/1, 14.32M]
. Any Ideas how to fix this? Seems like this is the wrong firmware for this printer. Everything else appears to work ok.
Bob

****UPDATE**** After running a few copies through the printer the wireless feature showed up again. The printed reports started to show this printer with the "NW" at the end of the model number instead of just the "N". After a few minutes it all went away again. Seeing the correct model number show up for a few minutes made me believe the correct printer firmware is installed. To make this a short story, I ordered the wireless PCA assy (Small internal wireless circuit board, HP part #1150-7940) and replaced it. It's been working great for the past few days( since the board was replaced). Apparently, if the system does not see a working wireless board it defaults to the non-wireless model number and the wireless option disappears from the menu screen. The other thing is there apparently is no fault code that covers this type of failure.....frustrating, to say the least. I will update if this is not the fix but, it looks like I got it!
Thanks!!!!!!!
Bob

HP LaserPro 200 color m252 nW

Similar Messages

Maybe you are looking for