Hp laset jet p1102w - wi fi print form iPad

I'm trying to connect the iPad 2 with the printer but I do not have wifi at home. The iPad is online via its mobile key. Is it possible to print form there anyway? Or via bluetooth ? Thank you very much

Hi @Davide75,
Thank you for responding and updating me.
If the Wireless Direct is not turned on, is the wireless radio turned on? To turn on the wireless, press the wireless button on the front panel. You will know that the wireless is on because the light will start to blink. Once the wireless is turned on, please try Printing a Configuration Page. The configuration page will let you know whether the Wireless Direct is turned on and what the name of the network the printer is broadcasting.
If the above doesn’t help please include a screen shot of the configuration page. I’ve included the How to take a screenshot post which will walk you through the process. In addition, do you have access to a computer as we may need it to get the printer set up? If yes, what is the operating system of the computer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

My Laser Jet P1102W is not printing

Hi,
My Laser Jet P1102W is not printing. I shut my computer off and then back on. Made sure that the cable of the printer is secure to the back of my computer, but it still does not print. Any other suggestions?

Try the steps in this document. If that does not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My printer hp lazer jet p1102w doesnt resume print through airprint when paper not available

hi
i have printer hp lazer jet p1102w. i upgraded to the latest firmware.
when paper not available in the printer and i reload it , it doesnt resume print through airprint in my ipad.
specially when i want to print on both side. i cannot resume printing. what should i do?
This question was solved.
View Solution.

Hi,
Once you have loaded the paper into the input tray, open and close the top cover of the printer. that will resume the print job and complete it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print form ipad 2

do i need an app?

It depends on what printer that you've got. If it's AirPrint enabled then you don't. Otherwise you could look to see if your printer manufacturer have their own app, if not then there are third-party apps such as Print Central For iPad and Print n Share which might work with it.

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

Open Adobe Print Form from ALV Int. Rprt using the XSTRING already present

Hello Friends,
I have a typicall issue that how to open a Adobe Print Form when a user double clicks in the ALV Report. Here when the user double clicks in the ALV Interactive Report using the unique ID I am getting the Adobe Form from a FTP location in the Form of XSTRING, now using the ABAP ADOBE PRINT FORM not using WebDynpro Application, I need to process this XSTRING and show up the Adobe Print Form.
OR
Is there a way to send the XSTRING to the Output Device or Printer to Display the PDF Form.
Friends please help me in solving this issue.
Thanks and Regards
Pradeep Goli
Edited by: Pradeep Goli on Mar 19, 2009 1:49 PM
Edited by: Pradeep Goli on Mar 19, 2009 2:51 PM

Hi Pradeep Goli,
it is possible to show PDF in SAP GUI.
Michal
REPORT ZTEST_DISPLAY_PDF.
* You must create dynpro 500 with custom control named HTML.
* In this custom control will be displayed PDF.
DATA: g_pdf              TYPE xstring,
      pdf_my_container   TYPE REF TO cl_gui_custom_container,
      pdf_html_control   TYPE REF TO cl_gui_html_viewer.
START-OF-SELECTION.
PERFORM create_and_display.
FORM create_and_display.
*** Your code fo filling g_pdf
CALL SCREEN '500'.
ENDFORM.
* PDF preview in HTML control
module html_control output.
perform pbo_html_control.
endmodule.
module html_control input.
perform pai_html_control.
endmodule.
* PAI
FORM pai_html_control.
SET SCREEN '0'.
ENDFORM.
* Showing of PDF
FORM pbo_html_control.
DATA: l_pdf_alignment TYPE i,
        l_count         TYPE i,
        l_noprint       TYPE fpboolean,
        l_noarc         TYPE fpboolean,
        l_noprintarc    TYPE fpboolean.
* CLEAR: fcode.
SET PF-STATUS 'VIEW_PDF'.
* container
IF pdf_my_container IS INITIAL.
    CREATE OBJECT pdf_my_container
      EXPORTING
        container_name = 'HTML'
      EXCEPTIONS
        OTHERS         = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
ENDIF.
* html control
IF pdf_html_control IS INITIAL.
    CREATE OBJECT pdf_html_control
      EXPORTING
        parent = pdf_my_container
      EXCEPTIONS
        OTHERS = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
*   alignment
    l_pdf_alignment = pdf_html_control->align_at_left +
                    pdf_html_control->align_at_right +
                    pdf_html_control->align_at_top   +
                    pdf_html_control->align_at_bottom.
    CALL METHOD pdf_html_control->set_alignment
      EXPORTING
        alignment = l_pdf_alignment
      EXCEPTIONS
        OTHERS    = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
ENDIF.
PERFORM pdf_show USING g_pdf.
ENDFORM.
FORM pdf_show USING p_pdf_data TYPE xstring.
STATICS: ls_url           TYPE i.
TYPES: lt_pdf_table(1000) TYPE x.
DATA: l_myurl(80)        TYPE c,
         l_url(80)          TYPE c,
         l_pdf_data         TYPE STANDARD TABLE OF lt_pdf_table,
         l_pdf_size         TYPE i,
         l_pdf_line         TYPE lt_pdf_table,
         l_offset           TYPE i,
         l_len              TYPE i.
l_pdf_size = XSTRLEN( p_pdf_data ).
l_len = l_pdf_size.
WHILE l_len >= 1000.
    l_pdf_line = p_pdf_data+l_offset(1000).
    APPEND l_pdf_line TO l_pdf_data.
    ADD 1000 TO l_offset.
    SUBTRACT 1000 FROM l_len.
ENDWHILE.
IF l_len > 0.
    l_pdf_line = p_pdf_data+l_offset(l_len).
    APPEND l_pdf_line TO l_pdf_data.
ENDIF.
ADD 1 TO ls_url.
l_myurl(8) = ls_url.
CONCATENATE l_myurl '.pdf' INTO l_myurl.
SHIFT l_myurl LEFT DELETING LEADING space.
CALL METHOD pdf_html_control->load_data
    EXPORTING
      url          = l_myurl
      size         = l_pdf_size
      type         = 'application'                          "#EC NOTEXT
      subtype      = 'pdf'                                  "#EC NOTEXT
    IMPORTING
      assigned_url = l_url
    CHANGING
      data_table   = l_pdf_data
    EXCEPTIONS
      OTHERS       = 1.
IF sy-subrc <> 0.
    MESSAGE e152(FPRUNX).
    RETURN.
ENDIF.
* show data
CALL METHOD pdf_html_control->show_data
    EXPORTING
      url    = l_url
    EXCEPTIONS
      OTHERS = 1.
IF sy-subrc <> 0.
    MESSAGE e152(FPRUNX).
    RETURN.
ENDIF.
ENDFORM.

Internal table in adobe print forms

hi there,
in my WDA-application i use adobe print forms for output.
i use a table for displaying an internal abap-table.
in the formular-hierarchy it looks like this:
table2
--> line1
--> cell1
--> cell2
--> cell3
my problem is that i am a complete newbie in scripting in print forms.
here is what i want to do:
if cell1 = 'X' then the text in cell2 has to be bold or underlined.
Can someone provide me with a code-example either in javascript or formclac???
thx
David

thx for answering.
first i tried the following code:
data.T1.Tabelle2::ready:form - (JavaScript, Client) -
this.Zeile1.Zelle2.font.weight = "bold";
this.Zeile1.Zelle2.font.underline = "1";
the result is, that cell2 is bold and underlined but only the first row of the table. i want all cell2 in all rows bold and underlined.
then i tried this:
data.T1.Tabelle2::ready:form - (JavaScript, Client) -
if(this.Zeile1.Zelle1.rawValue == "01"
this.Zeile1.Zelle2.font.weight = "bold";
this.Zeile1.Zelle2.font.underline = "1";
nothing happens and i dont understand why. The visible value in Zelle1 is "01"!

Question regarding Graphics - Print Forms

Hi,
This is a print forms question. We are on ECC 5.0, basis release 640
Currently, for all our SAPscripts, we have our graphics as TIF files stored as text modules.
For our Smartforms, we loaded BMP files to the BDS using transaction SE78.
Adobe brings up the exciting possibility of using smaller sized JPG/JPEG files.
The only place I can think of storing the JPEG files in the SAP system is the MIME Repository. Looks like SE78 does not support JPEG files.
Here's my requirement and question.
In the mime repository, I created folder 'LOGOS' in SAP/PUBLIC. So, the path would be /SAP/PUBLIC/LOGOS
The names of the files in the mime repository are 'LOGO_A' and 'LOGO_B'.
We need to print the company logo based on company code.
If company code is 'A' then 'LOGO_A' else, 'LOGO_B'.
We are reluctant to read the graphic in the ABAP program and pass the whole content through the Interface.
I cannot embed the graphic in the form since the LOGO will change based on company code.
Since we can use an url for an image field in Adobe forms, how can I point the url to the mime repository?
Any help on this is greatly appreciated.
Thank you.
Best regards,
-Ramesh

Thanks Markus.
By what you said, I am inferring that you mean access to load the graphic files to the Mime Repository.
My question is to read the Mime repository since users of bsp applications can still see the LOGOs in their bsp pages (I think. Never did BSP before).
Here is what I am doing currently.
Here's my interface:
LOGO_DATA TYPE XSTRING.
In my driver program, I am reading the Mime Repository graphic into an XSTRING and passing it through the interface to the LOGO_DATA field.
I created a Graphic in the Context and set it to 'Graphic Content'.
I am setting the 'Field' property to LOGO_DATA and MIME Type to 'image/jpeg'
Now,
Instead of reading and sending the whole binary content across through the function call, I am looking to see if the following would be possible:
Interface:
LOGO_URL TYPE STRING
In the driver program, assign the URL of the Graphic to field LOGO_URL (Don't know how yet).
In the context, create a Graphic and set it to 'Graphic Reference'
In the URL property, set the Graphic URL property to LOGO_URL field and then clear out the delimiter field.
If it is not possible with the Mime Repository, will it be possible with the Business Document Server (Transaction SE78).
Thank you.
Best regards,
-Ramesh

This is about iPhoto: I need to print the FULL IMAGE as shown on the screen: the image is SQUARE (equal on four sides). iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE! How do I get what I see on the screen in print form???

I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?

Like Terence explained:
OT

Manipulation of Print form after generation

I am using Adobe Forms as print forms within the SAP ERP 5.0 without WebDynpro.
I have requirement that I need to manipulate the generated PDF file by adding additional attachment files to the PDF generated by the function module. Technically this seems to be possible by combining the different APIs as follows:
1. Setting the output parameter GETPDF to 'X' while calling FP_JOB_OPEN and
2. Getting the binary file from the /1BCDWB/FORMOUTPUT object
3. Then setting the binary to the IF_FP_PDF_OBJECT object via the SET_DOCUMENT method
4. Adding the additional attachments via SET_ATTACHMENTS method.
Is there smarter way to do this so that the attachment could be already added via the function modules?
Is there any linkage between the function modules FP_* used for print forms and the classes IF_FP_PDF_OBJECT that provide the ADS services?

It seems that SAP has not even implemented the method IF_FP_PDF_OBJECT~SET_ATTACHMENTS in WebAS 6.40. It simply throws exception without doing anything.
So it seems that the whole scenario is not even possible in NetWeaver 2004/Basis 6.40.
On the question on why:
In our scenario we need to attach additional PDF files (generated in external systems or scanned paper documents) to the print form produced by SAP. It seemed that the PDF attachments would provide solution for combining these external files with the form.
The other alternative solution, that I have considered, is to "embed" the external documents to the form using the Image Field element in the layout. This is not really an option, because Image Field supports only BMP, JPEG, GIF, PNG and TIFF - NOT PDF. Secondly, it's really designed for embedding fixed-size images to the form. In our case the scanned document can be 10 pages long.

How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.) Only the user-entered info should print on the pre-printed form. Users will use Adobe Reader to complete their templates; they do not have Acrobat. Thank you!

Use the template as non-printable background and add the form fields.

How to Print form using SAP Smart Forms which is migrated from SAP Script?

Hello every one,
     i have a problem in printing form using smart form which is migrate from the SAP Script...so what method i have to use...if any one know the solution for this than plz reply me as soon as possible...

hi
when ever u want to migrate the script to smartform u have to chage the driver program also..
refere this link to convert script to smartform
convert sapscript to smartform
c_formname = u r smartform name...
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
...........................CALL SMARTFORM............................
CALL FUNCTION v_fm_name
EXPORTING
    control_parameters   = st_control_parameters
    output_options       = st_output_options
IMPORTING
    document_output_info = st_document_output_info
    job_output_info      = st_job_output_info
    job_output_options   = st_job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Hp laser jet m4345 mfp its printing blank page

I got a hp laser jet 4345 mfp its printing blank pages

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Hp laset jet p1102w - wi fi print form iPad

Similar Messages

Maybe you are looking for