Hp library and tape tools

Anyone, HP Library and Tape Tool shows under the download as supporting Solaris 10. Solaris 10 is ancient so can you say if the current version supports Solaris 11? Thank,
Laz

Hi:
You may also want to copy and paste your post to the HP Business Support Forum -- Tape Libraries and Drives section.
http://h30499.www3.hp.com/t5/Tape-Libraries-and-Drives/bd-p/itrc-198#.U4-FIv1OXGg

Similar Messages

Tape library and tape drive configuration in solaris platform

Dear all,
I am tying to install oracle secure backup media library server in solaris SPARC 64 machine.
when i was try to run run SETUP command always miss to copy drive .please look my output.
./setup -t /usr/local/oracle/backup/Dec 19 12:42:02 ctcellm last message repeated 2 times
Welcome to Oracle's setup program for Oracle Secure Backup. This program loads Oracle Secure Backup software from the CD-ROM to a filesystem directory of your choosing.
This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_SOLARIS64.
Please wait a moment while I learn about this host... done.
1. solaris64 (SPARC)
administrative server, media server, client
- - - - - - - - - - - - - - - - - - - - - - - - - - - Loading Oracle Secure Backup installation tools... done.
Loading solaris64 administrative server, media server, client... done.
- - - - - - - - - - - - - - - - - - - - - - - - - - - Oracle Secure Backup has installed a new obparameters file.
Your previous version has been saved as install/obparameters.savedbysetup.
Any changes you have made to the previous version must be made to the new obparameters file.
Would you like the opportunity to edit the obparameters file Please answer 'yes' or 'no' [no]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - Loading of Oracle Secure Backup software from CD-ROM is complete.
You may unmount and remove the CD-ROM.
Would you like to continue Oracle Secure Backup installation with 'installob' now? (The Oracle Secure Backup Installation Guide contains complete information about installob.) Please answer 'yes' or 'no' [yes]:
Welcome to installob, Oracle Secure Backup's installation program.
For most questions, a default answer appears enclosed in square brackets.
Press Enter to select this answer.
Please wait a few seconds while I learn about this machine... done.
Have you already reviewed and customized install/obparameters for your Oracle Secure Backup installation [yes]?
Verifying that installation parameters are correct... done.
Updating install/obparameters... done.
Oracle Secure Backup is already installed on this machine (ctcellm).
Would you like to re-install it preserving current configuration data[no]? yes
Oracle Secure Backup's Web server has been loaded, but is not yet configured.
Choose from one of the following options. The option you choose defines the software components to be installed.
Configuration of this host is required after installation completes.
You can install the software on this host in one of the following ways:
(a) administrative server, media server and client
(b) media server and client
(c) client
If you are not sure which option to choose, please refer to the Oracle Secure Backup Installation Guide. (a,b or c) [a]? b
Beginning the installation. This will take just a minute and will produce several lines of informational output.
Installing Oracle Secure Backup on ctcellm (solaris version 5.10)
generating links for server installation
checking Oracle Secure Backup's configuration file (/etc/obconfig)
protecting the Oracle Secure Backup directory
installing /etc/init.d/OracleBackup for observiced start/kill ops at
operating system run-level transition
installing start-script (link) /etc/rc2.d/S92OracleBackup
installing kill-script (link) /etc/rc1.d/K01OracleBackup
installing kill-script (link) /etc/rc0.d/K01OracleBackup
Starting Oracle Secure Backup service daemon (/etc/observiced)
from all of the documentation i found that after execute below command it will automatically copy device drive
installing start-script (link) /etc/rc2.d/S92OracleBackup
installing kill-script (link) /etc/rc1.d/K01OracleBackup
installing kill-script (link) /etc/rc0.d/K01OracleBackup
Starting Oracle Secure Backup service daemon (/etc/observiced)
please help me out from this issues .
regards,
utpal

I am facing the same problem. Could you please give me the procedure to solved this issue. How can i add the driver???
# update_drv /usr/sbin/update_drv -d '"scsiclass,01"' st
Usage: update_drv [ -f | -v ] <driver_module>
update_drv [ -b basedir ] [ -f | -v ] -a
[-m 'permission'] [-i 'identify_name']
[-P privilege] [-p 'policy'] <driver_module>
update_drv [ -b basedir ] [ -f | -v ] -d
[-m 'permission'] [-i 'identify_name']
[-P privilege] [-p 'policy'] <driver_module>
NOTE: at least one of m/i/P/p must be specified with -a and -d.
# add_drv -m '*0666 bin bin' -i '"scsiclass,01" "scsiclass,08" "scsa
,01.bmpt" "scsa,0.8.bmpt"' sgen
Option (-m) : missing token: (*0666 bin bin)
Usage:
add_drv [ -m '<permission> ','<...>' ]
[ -n ]
[ -f ]
[ -v ]
[ -i '<identify_name <...>' ]
[ -b <basedir> ]
[ -c <class_name> ]
[ -p <dev_policy> ]
<driver_module>
Example:
add_drv -m '* 0666 bin bin' -i 'acme,sd new,sd' sd
Add 'sd' drive with identify names: acme,sd and new,sd.
Every minor node will have the permission 0666,
and be owned by bin with group bin.
In Solaris 10 10/09 Release Notes:x86: add_drv, update_drv, and rem_drv Commands
ShouldUse Advisory Record Locking (6445040)
The update_drv command does not remove the /tmp/AdDrEm.lck lock file immediately,
resulting in subsequent add_drv, update_drv, and rem_drv commands to fail. This issue is
mostly visible when creating a custom install image. This lock file has been bundled in the
miniroot so any attempts to add a package will fail. The following error message is displayed:
add_drv/rem_drv currently busy; try later
Workaround: If the /tmp/AdDrEm.lck file exists, manually remove it before attempting a
pkgadd or _drv commands.

I have downloaded the app game your video but i cant save the videos to my photo library and i cant enable permission because it doesn't appear in privacy settings

i have downloaded the app game your video but i cant save the videos to my photo library and i cant enable permission because it doesn't appear in privacy settings

If you have not provided access, you can do so by going to default Settings app > Privacy > Photos and switch ON Game Your Video.
Game Your Video saves all videos to its own library. To sync to Camera Roll, simply go to Library and tap on Multiple selection button. Now select the videos to copy and tap on Sync button in the bottom bar. (See screenshot attached)
But you still have some issues, just email it to their support team: [email protected]
Also update the app. Game Your Video 2.0 is available on the App Store.

HT4059 I bought the my life as a book on the I book store and it is not in my library and when I try to buy it again it says you have already bought this item to download it go to purchased and tap download and there is no place to tap download so how do

I bought the my life as a book on the I book store and it is not in my library and when I went to go buy it again it said you have already bought it and to down load it go to purchased and tap download and there is no where to tap download so Ihow do I get it in my library and how do I download it

Try going into store then entring apple ID along the bottom...there's a tap for hidden downloads, slide finger across to unhidden then it should come bak into your library. Hope it works it did for me .

SL500 tape library and IBM LT0 5 tape drive Firmware locations

Hi All,
I need the locations or the url to download the latest firmware for SL500 Tape Library and IBM LT0 5 Tape Drives.
Regards,
Joseph

However, IBM LTO5 firmware is available for download by customer via support.oracle.com / patches and updates. Just search for 145784-08.
Product Family
Drive Supplier
Drive Firmware
Drive Patch
LTO-5 (FC 8Gb)
IBM
D8D4
145784-08

I bought the song say something and it tried to download and it's in my library and I can play it but it has that little cloud thing beside it and when I tap it, it says that the done can't be downloaded at this time. How can I get it to download?

I bought the song say something and it tried to download and it's in my library and I can play it but it has that little cloud thing beside it and when I tap it, it says that the done can't be downloaded at this time. How can I get it to download? It's been like this for a couple weeks.

You can download it on your computer at no extra charge and then sync it to your ipod

I want to get rid of iTunes Radio and just play my music library. The tool bar at the bottom allowing me to select playlists, artists etc isn't there any more. HELP!

Getting rid of iTunes Radio. How do I navigate back to my own music library? The tool bar at the bottom disappears.

Open the Music app.
Tap More on the bottom menu
Tap Edit (upper right)
Drag the icon on or off the lower tool bar to select the functions you want on it.
At step #2, you can also simply select the view you wish to use.
To navigate back to a view that shows the menu (for example, when you are playing a song), tap the < icon (upper left).

New SCDPM 2012 Deployment Scenario and tape Library Sharing.

Folks
I am having one SCDPM 2012 SP1 on Server 2008 R2 with one tape library. I am going to build another second DPM on Server 2012 and I want to share the same library which is on first DPM.
Before I build second DPM server I want to make some doubts clear so it does't create issues later.
Both DPM will be physical.
I am reading technet link to share tape ibrary : http://technet.microsoft.com/en-us/library/hh758124.aspx
And My queries are:
1) The tape library must be in a storage area network (SAN) environment.
>The tape Hewlett Packard LTO Ultrium-5 drive I have is attched to first DPM server through SCSI array.Dont know if it is SAN supported.
2) We recommend that the system configuration of the library server computer and all library client computers be as similar as possible, and that you do not configure any protection groups on the library server.
>As I have attached library to my first DPM server which is having 22 Protection groups with 562 datasources. Can it be promoted as a Library server? If not then what is solution for this.
3)All DPM servers using a shared library must use a similar SQL Server setup for hosting DPM databases.You cannot have some DPM servers using local instance and others using a remote instance.
>My first DPM is hosting its Database on its own (local) So should I setup SQL on second DPM localy?
4)SQL accounts should be DOMAIN accounts? On the technet link it is showing SQL failover cluster, where does it require? As image showing it is required between library clients but I will have one library server and one library client, will I needed SQL CLuster?
This was related to Tape, now other queries I have if second DPM and tape sharing deployed successfully.
1) First DPM has reached LDM records occupancy 79% and I have identified non-colocated datasources/Protection groups which are occupying larger amount of LDM. I will move/recreate these protected groups on 2nd DPM with COLOCATION so they cant use much LDMs.
a)Should I stop protection on 1st DPM and add these protection groups on 2nd DPM. Will it allow me to add since Inactive replica there would be on 1st DPM for 30days
b) Or should I Migrate these PGs?
c) What is best practice for this?

Figured it out. Since I'm on a preconfigured RDS server, the RDS Session Host role is already installed. So technically Session-based desktop deployment is already set up. It's the difference between the session host role and the Virtualization
Host roles...slightly confusing when you walk into the middle of the deployment.
It would also explain my second part of the question since the session host role is installed....

Hello, my mail is gone and I can't find it anywhere. Its not in library and I have not configured Time Machine yet. Help please?!

Hello, my mail is gone and I can't find it anywhere. Its not in library and I have not configured Time Machine yet. Help please?!

Use Find Any File, if the old messages might have been in a specific mailbox, to look for a file by the name of the mailbox to see if there are any larger versions of that mailbox.
http://apps.tempel.org/FindAnyFile/
If your Mail is indeed gone, you may be able to recover it with one of the data recovery tools here:
https://discussions.apple.com/docs/DOC-1689
But act quickly. Every action while the computer is turned on weakens its chances of recovery. There is a slim chance also your email provider may have tape backup from before you checked your messages and after it arrived at their server for certain messages. You may want to ask them if that might have happened.

I had to recreate my itunes library and now, when i tried to sync my ipod, i got a warning that everything currently on my ipod would be cleared; how do i sync without losing the information currently on my ipod?

Recently I was forced to recreate my entire iTunes library. My computer shut down unexpectedly and when I restarted it, my iTunes library was gone from the iTunes software. After *finally* receiving some information from iTunes support about restoring the library (which meant I had to do exactly what I was afraid I would have to do--basically click-and-drag the entire contents from my hard drive back into the library), I wanted to update my iPod with the songs I'd added since the last updating. And this is where more trouble began.
When I plugged in my iPod to sync it with the library, I got a warning message informing me that the library currently on the iPod would be cleared during the syncing, because the iPod can only be associated with "one" library. Well, I did NOT want to do that because I wanted to retain the playcount and other information about the songs. I was also hoping to keep the playlists currently on the iPod.
So, my first instinct was to contact iTunes support. The only problem there was that going through the Support pages ended up with my needing to call Apple. I'd attempted that when I first lost the library and was told by the Support associate that ALL iTunes help and support must be done online. Ironic, huh? I can't get iTunes support online until I call Apple support to get a direct web address to take me to the express lane help pages. And, unfortunately, I made the mistake of uninstalling and reinstalling my AOL software and lost ALL of my e-mails with the iTunes support addresses in the process.
So basically, I need to know what to do here. Is there a way to keep the current iTunes library on my iPod and still syncing with the recreated library or do I just need to accept the loss of the library currently on my iPod? I may try to call Apple Support and get that iTunes online support address again but I'd really like to get this resolved more quickly. The last time that I called and then I got the iTunes online help address, it ended up taking 2 days to get that help.

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

Delete photo from iPhoto library and HDD

Hopefully I'm not repeating a previous thread...
Not being an expert, am I correct in saying that iPhoto only changes its version of the photo when editing it?
Also, if you delete the photo by moving it to the trash can, it doesn't physically delete it from the HDD? (When you empty the trash can)
This causes a problem for a few reasons.
I have just loaded Medialink PS3 which allows the iMac to serve the PS3. (BTW - Good product)
If you point Medialink to the original HDD folder then this still includes photos I thought I had deleted.
Also If I want to burn a cd with the photo folder external to iPhoto , the "deleted" photos are also burnt.
I copied all of the photos from a windows PC, and Picasa allowed you to physically delet from its own folder as well as the HDD.
Doesn't iPhoto 09 allow this?
What would iPhoto do if I went through and cleaned up the external folder and deleted jpgs or edited using Canon editing software? If using the external editor, would iPhoto reflect the changes?
Sorry if this is verbose.
regards,

You might want to have a llook at the iPhoto tutorials. They cover a lot of these basics.
http://www.apple.com/ilife/tutorials/#iphoto-hero
And the version of iPhoto you are using?
I'm not at all sure that a Referenced Library is what you want. In fact I strongly recommend against it. But however:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
+Some Other Comments+
iPhoto will not touch any file outside its library. Period.
It will copy files on import and leave existing files untouched,
It will delete files within the Library but not outside the Library.
When you choose to go with a Referenced Library you are deciding that You want to manage the Files. You want to import them from the camera, you want to sort them however you want and you want to delete them yourself. That's the point of a referenced Library.
I just did a test by editing a photo using Canon Professional and the changes were not reflected in iPhoto. And vise versa.
The point of iPhoto is that you interface with your Photos via the Application. Like Addressbook for your contacts, iTunes for your Music, it's the go-to app for your Photos.
So, you want to edit Photos, you go to iPhoto and use the External Editor:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Regards
TD

Ihave 51 iphoto library and they keep increasing and i do not know why

My iphoto has 51 libraries and they keep increasing and i do not know why, i would like only one iphoto library and consolidate all photos in that.

If you're using an IMAP account, also check your other devices to be sure you don't have some filters or rules set up that either delete or move emails to subfolders. You can see all Emails on your iPad, but displaying the sidebar showing Mailboxes, tapping the email account you are having trouble with (NOT the Inbox, but the section below), then tapping All Mail or something similar depending on your provider.
If the mails are there, they are somehow being moved by one of your mail clients or by a rule you set up with your provider.

Ipad mini remote app will connect to my itunes library and apple tv but won't display content from itunes library on the apple tv section of remote app

What I am trying to do is very simple, and I am sure I have done it before.
I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen.
Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image. Any ideas? I know that the remote app is connecting to the apple TV because I can control it using gestures, just strange I can't see the content on the ipad like in the attached video clip, instead I see the screen in the image below. Any ideas would be greatly appreciated!

OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

Ipad mini remote app will connect to my itunes library and apple tv but can't play content from itunes library on the apple tv

What I am trying to do is very simple, and I am sure I have done it before.
I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen.
Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image.

OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hp library and tape tools

Similar Messages

Maybe you are looking for