HP Lists 3 Options For Scanning

The following link (shown multiple times in this forum) lists 3 options for implementing the scanning feature of HP Photosmart scanners with OS X 10.6:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&dlc=en&lc=en &jumpid=regR1002USEN
I have tried the "Preview" approach, and it worked!
What I'd like to know is whether there is any significant advantage of one option over another.

It sounds like you have the 10.5 driver versions installed versus the Snow Leopard drivers.
Look for an HP folder in your Applications folder. If you find one open it and look for an uninstall option. If there isn't one then delete the folder and go into System Preferences -> Print & Fax Settings and remove the printer. (if you have an Adobe printer that's not going to be any good to you in Snow Leopard either)
Now add the printer back and the new Snow Leopard drivers should load.
Take a look at the following article
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=2512010
Hope that helps

Similar Messages

Value not found in allowed list of options for field...

Hi,
I'm using RIDC on UCM 11g in order to checkin contents.
UCM hosts different projects.
I've the following problem: if somebody (from a different project) insert a new Information Field (e.g. xAnnoPubblicazione) of type Integer - Option List - Select List Validated and it does not make a default value for this field, when I perform checkin using RIDC, it fails with the error:
"oracle.stellent.ridc.protocol.ServiceException: Content item 'UCMRE010132' was not successfully checked in. Value not found in allowed list of options for field 'xAnnoPubblicazione'.
How can I solve this issue? what's the recommended way?
Thank you very much.
Best regards,
S.

In the database language, you have created a NON NULL column and you are trying to insert a record with NULL value to the column. Of course, it cannot work.
There are three options:
- do not declare the field as NON NULL (that is, you option list has to contain 'blank' as a possible value)
- provide the value on insert
- provide the default value

HT204266 When in setting's on display list is option for radio how do you get it to work or is this not possible. When i press centre button it puts a tick beside it

When in settings on display list is option for radio how do you get it to work or is it possible. When centre button is pressed a tick appears beside it.

The Palm Desktop is available to download from the Palm site:
http://www.palm.com/us/support/macintosh/mac_desktop.html
though this doesn't list the Clie devices and you may need to check which version you should be using. The Desktop will run on 10.4.
The 'Apple' key is the Command key.
You may need USB Overdrive - a useful program - unless the mouse comes with a Mac driver (some Miscrosoft mice do). Apple's Might Mouse will work fine.
USB overdrive usefully allows you to assign the same mouse click to do different things in different programs.

Why does Google auto-complete fail in Firefox 17.0.1 when I type something in the search field there is no pull down list of options as I type?

When I type a word or term into the Google search bar the auto-complete fails; there is no pull down list of options for my search, only what I have completely typed in. I have to type in the complete word or term that I am searching for and then press return to get the results. I'm using a MacBook and OS X 10.7.5 Please help! This is so frustrating!

Note that websites may be using autocomplete=off to prevent Firefox from saving and filling autocomplete data as I posted above.
Did you check for that?
You can remove autocomplete=off with a bookmarklet.
* http://kb.mozillazine.org/User_name_and_password_not_remembered
If a site uses autocomplete="off" then look at this article for a bookmarklet to remove the autocomplete attribute.
* http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
You can paste this code in the command line in the Web Console (Web Developer > Web Console; Ctrl+Shift+K) and press the Enter key to verify if there is an input field with autocomplete.
*https://developer.mozilla.org/en/Tools/Web_Console
<pre><nowiki>var c=0,e=document.querySelectorAll('input[autocomplete],form[autocomplete]'),T='\n';
for(i=0;E=e[i];++i){T+='['+(++c)+'] '+(E.name||'#'+E.id)+' ('+(V=E.getAttribute('autocomplete').toLowerCase())+')\n';}
console.log('autocomplete: '+c+T);
</nowiki></pre>

MF Toolbox wont give auto feed option for scanner

We've sucessfully used our MF4350d for months. No problems with MF toolbox until randomly the auto feed option for scanning disappeared and the only option on drop down from toolbox when selecting source is platen glass.
When contacting canon for assistance to resolve this, I was told support for something so clearly a canan software issue and not a printer issue would cost $99.99. Beyod the cost of going out and buying a new scanner from a different company. I hope canon can show some customer care and help resolve this issue.

Hi bowski.
I will be glad to assist you.
Please note that Canon does not charge for technical support by telephone. To contact us, please call 1-800-OK-CANON (1-800-652-2666), Monday - Friday (excluding holidays), from 8:00AM - 8:00PM.
So that I can better assist you with the MF Toolbox, I would like to ask a few questions.
1. Which operating system is installed on your computer?
2. How did you install the drivers and software onto the computer?
I look forward to your reply. Should you need immediate assistance, please contact us at the number above and a telephone support representative will be able to assist you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

In 'Desktop' the display options for the chosen image have vanished.

I have an iMac with Snow Leopard.
Using the option 'Desktop' in 'Desktop and Screen Saver', on choosing an image, under the name ofm the image chosen, there is usually a list of options for how the image is displayed :-
Tile
Fuil screen
Fit to screen
These are no longer displayed. Where is the option for switching the list back on?
I have tried restarting.
Thanks in advance
David

Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Please post back the results.

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

Drop Down List in a table - different options for each row

How can i have a drop down list in a table with different options for each row?
My requirement is this.. I want to display, say employee dtails in a table, and one column is employee hobbies, whcih can have multiple values and each employee may have a different list of hobbies. So how can we populate the drop down for each row, with different options?

Hey. Uh, this probably isn't the answer you were looking for, but it sounds like you've got a problem with your database design there. Generally speaking, your tables shouldn't have multi-valued fields, in the relational model anyway (sql). Instead, you should look at adding a separate table like EMPLOYEE_HOBBIES. Then you have a foreign key using the employees primary key as the foreign key in the employee_hobbies table, see what I mean? I might have misunderstood your explanation though, I'm not sure.
Alternatively, you could just have hobbies as a big freeform varchar field, and don't bother to make people separate their hobbies into different fields (you'd have to abandon the drop-down listbox idea in this case). If there's no really important reason to make the distinction, then it's probably easier just to not do it.

Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

Unfortunately, Toshiba USA doesn't ship there, and it's not available to download. You'd have to see if there's a third-party that could sell you it or have someone you know in the US order it and then ship it to you. Sorry.
- Peter

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

The three Rs to IOS, try them in order until the issue is resolved;
Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

HT2518 I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer. Any1 else have such a plm? If so, how did you resolve?

I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer. Any1 else have such a plm? If so, how did you resolve?

I used O2M from http://www.littlemachines.com to move from Outlook to Apple Mail.
Richard

No "list-name" option availbale for aaa authorization command.

I have a 1721 router running 122-15.T14 and want to implement authorization but the router does not provide command option for list name.
I want to implement the following command:
"aaa authorization network groupauthor group radius"
but the only option is default after "network".
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-K9SY7-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 27-Aug-04 23:26 by cmong
Image text-base: 0x80008120, data-base: 0x80F731A0
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-K9SY7-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
Router uptime is 5 minutes
System returned to ROM by reload
System image file is "flash:c1700-k9sy7-mz.122-15.T14.bin"
cisco 1721 (MPC860P) processor (revision 0x400) with 56844K/8692K bytes of memory.
Processor board ID FOC08302CF6 (610086355), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router(config)#aaa authorization network ?
default The default authorization list.
Router(config)#aaa authorization network

I think that your issue is version related. I have a customer who is running a bunch of 1721 routers and when I do aaa authorization network ?
I get both default and the option to name a list.
I checked with the Software Advisor on CCO and it looks to me like the named-list feature was added in 12.3. As long as you are running 12.2 I do not think you will have the option for a named-list for network authorization.
HTH
Rick

Scanning from RX620 Epson -- no option to scan in jpeg ?

I am using Epson All i one printer/scanner (RX620) & when I scan to my computer (OS X 10.9.3) to edit pictures I cannot default to jpeg ( not listed as option) the default is TIFF.
Epson have responded to my question saying that they have not issued a driver for the APPLE ... is there any to overcome this.( I think this has only just recently happened as I can only remember scanning to a jpeg default ?

Try using the Image Capture app located in your Applications folder for scanning.
Launch Image Capture located in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
If you need help with the Image Capture software, click Help from the Image Capture menu bar.
Mac Basics: Using a scanner

The HP software required for Scan to Computer could not be located on this computer.

No scanning from the HP front panel. Get this from the HP utilities "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." I've downloaded, deleted and downloaded the drivers and i tried to let my mac get drivers from the printer. I have to go to the web do scan my flat bed.

Hello @wfreker,
Welcome back to the HP Support Forums! I understand you are not able to use the Scan to Computer feature with your HP Officejet 8625. Please follow the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Save layout option for Block Alv

Hi,
Small Question,
Is there any way to enable Save layout(Ctrl+F10) option for Block ALV?As i cannot see any option to do so with Reuse_*Block like i_save in Grid and For list ALVs...FM.And its by default it is Disable.
Any Hints?
Cheers,
Amit.

That's what i already investigated(Small).
wanted Just to confirm.Anyways thanks.
@Gautham:I already found that link([And this also |/message/702997#702997 [original link is broken];) but thought After 2 and
half yrs Vijay found any solution and would land with any solution as always
Anyways Thanks Vijay And Gautham.
Cheers,
Amit.

HP Lists 3 Options For Scanning

Similar Messages

Maybe you are looking for