HP LJ 4250 freezing after RAM check

Hi all.
I have a printer LJ 4250dtn which is working ok since 4 years at least.
Today I switched it off and when I switched it on again it made the check of the RAM (IAMB) , then I saw all the 3 light (printer ready, Data, Warning) on the left the control panel switch on for about 1-2 seconds and they immediately switch off.
On the display the 80MB count of the RAM followed by 2 rows of asterisks stays freezed forever.
I tried to remove RAM and in this case the display switches on without any strings.
I tried to clean its DIMM, without any results. No error messages. Any idea?
TIA for any answer

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

G31M Freezing After RAM Check, Says 1596fsb which might be problem..

Hello....
Putting together a Dual core duo with a MSI G31M mobo. It keeps resetting itself.. wont even show post.. all i here is one tiny, quick (not loud) beeping. and if it hit DEL or TAB... it will show the corresponding screen, but just frozen.
The insert button thing isnt working either (yes i did total power removal).
It says on the top of the POST screen "Speed: 1596 mhz" which might be the problem...
It freezes after "Init USB controllers: OK | 1015mb..." then it stops..
Thanks everybody...

Hi,
your BIOS Version is too old to properly support your E7400. That is why the CPU Frequency only shows as "1596 mhz" and that is also why the system does this:
Quote
all i here is one tiny, quick (not loud) beeping. and if it hit DEL or TAB... it will show the corresponding screen, but just frozen.
Quote
It freezes after "Init USB controllers: OK | 1015mb..." then it stops..
There are three possible solutions to solve the situation:
1) Install a processor supported by BIOS Version 7.1 to be able to properly turn on your system and then update the BIOS to the latest Version to be able to use your E7400 (update should be done from DOS only).
2) Ask in a local computer shop or contact your reseller to do the same thing for you.
3) Connect an internal floppy drive and a PS/2 Keyboard and then try to force the system into AMI BIOS Recovery Mode. Instructions:
Quote
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
Even though the AMI BIOS Recovery Procedure is the only chance you have to solve the situation without installing a different processor, it does not work in all cases. However, as it is an easy procedure, it is at least worth a try.

My Macbook Pro Freezes after RAM Upgrade

I have a newly purchased macbook pro that came with lion, MC700, with 4GB of ram Default. I purchased CMSO8GX3M2A1333C9 from newegg to give me 8GB of ram. After installing the RAM, if i use the macbook for extneded periods of time the screen will hardlock, graphics artifacting is seen on screen and it beeps, causing me to hard shut down the unit. This is most noticeable when using Youtube HD or watching a DVD movie. I ran apple hardware diagnostics and it says everything is fine, I also ran memtest overnight with no errors. Thinking this might be a corrupt lion install i reinstalled clean and still get the issue. I bootcamped windows 7 x64 onto the unit and it will BSOD and hardlock just like lion would. I used the Windows Memory Diagnostic tool and it said no errors. My return time has expired for both the macbook (purchased at a best buy) and the RAM (from newegg). I know i can contact corsair but I dont know if that will even help, any ideas? My system is up to date with the newest updates as well.

I forgot to put that in the OP, when putting back the 4gb stock it works fine, but doesnt solve my issue. THe ram tests fine, is the MBP just that picky? I know i can RMA with corsair but there really isnt anything wrong with said ram its like its overheating when the new ram is put in

Temporary Machine Freezes After RAM Previews

We're having alot of trouble pinning this down, and are using up alot of time approaching a deadline.
I'm using:
Intel Core 2 Quad Q9550 @ 2.83Ghz
8Gb RAM
GeForce 9800 GT with 182.50 Driver
Win XP Pro x64 SP2
with AE CS4
Up until a few weeks ago, this wasn't a problem, but basically, after a RAM preview, and in this case a 700 frames 1050x576 shot, single layer in the comp, no effects, with Task Manager reporting about 2.3Gb RAM in use during the preview - the machine locks up for tens of seconds, sometimes up to a minute or two when I come out of AE. Can't open drives, can't access anything in fact, then suddenly it comes back and works normally again. never crashes, just locks you out.
Am I missing something here? Is this normal? The point is that through the back end of last year, I spent 14 hour days throwing long HD shots and comps at AE, doing RAM previews, etc., but it all worked fine. Some slowdowns with that kind of data flowing through, but nothing outrageous.
We spent today swapping out RAM modules, thinking it's a RAM issue, though there are no classic symptoms of RAM failure, but that hasn't helped. Tons of free space on the two internal drives - 762Gb free on the boot drive, and 347Gb on a second drive.
I would appreciate any ideas as we are up against a difficult and tight deadline, but as ever, this kind of thing happens.
Thanks.
Julian.

Are you using Render Multiple Frames Simultaneously multiprocessing? If so, make sure that you've got enough RAM reserved for other applications, including the OS. Actually, I'd try just turning Render Multiple Frames Simultaneously multiprocessing off to see if that alone makes your problem go away.
A side note (perhaps not related to your issue): You didn't say whether you had installed the After Effects CS4 (9.0.2) update. That update fixed a lot of bugs.

MACBOOK "hanging up or freezing" AFTER RAM UPGRADE

I recently upgraded the ram on my macbook from 1 GB to 4GB. it would boot up and operate normally for sometime and then would suddenly freeze showing the colorwheel icon, i can't even use the force quit option..i would then have to turn off the machine. i don't know if this is a compatibility issue with the ram sticks i bought. i hope someone could help me with my problem. below are some info from the system profiler:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.1 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f1
Serial Number (system): W8831F3R0P0
Hardware UUID: 1C5177E4-0079-5F31-A0E1-DBFDBE2103AB
Sudden Motion Sensor:
State: Enabled
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F7F6B00
Part Number: 0x38445245334D4E382D544154500000000000
Serial Number: 0x67E21051
BANK 1/DIMM1:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F7F6B00
Part Number: 0x38445245334D4E382D544154500000000000
Serial Number: 0x67E21051

Hey Brian James & welcome to the forums.
If you still have the old RAM, put that back into the computer and see how the computer performs. You may find it a little slow, but it shouldn't keep locking up if the new RAM is the issue.
~Lyssa

Computer freezes after RAM increase

I have a Compaq desktop with this motherboard MCP61PM-HM rev 2.2 running windows 7.
Made a memory increase from 2GB to 8GB with 4 compatible memmory sticks. Computer launches windows but then freezes. I can see it recognises the 4 memmory sticks and it keeps working in safe mode but not in normal mode.
Tried the different sticks, they all seem ok and work well until 3 (6Gb); when I add the 4th one (8Gb) it crashes again.
What should I do? thanks

Yes!! you are correct
This unit should support upto 8GB Memory Module and you can confirm the same by looking into the below shown link.
I am not sure why it is not working
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01569805&tmp_track_link=ot_faqs/top_issues/en_u...
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance to get your Notebook diagnosed by an authorized HP Certified Engineer once to be in safeside
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

My mac keeps freezing, i checked my ram fine, checked if SMART was verified it was, i reinstalled my software a few times and my RAM is 8gb used memory clean to make sure it wasnt a RAM probkem and my macbook is still freezing my RAM is 8gb i have 4.50/4.80 gb left and Mid -2012 model Macbook Pro what could be the problem also it started freezong when i upgraded to Yosemite and now my mac freezes once im logged into and sometimes has problem booting up either freezing or agent secuity error black screen??!!!!

Freeze-up after RAM and Leopard Install

Machine: iMac G4 1.25GHz 20-inch Flat Panel
Problem: Computer “freezes” after going through a normal startup. I believe that this is related to overheating. I have installed a new fan, the fan runs, but it does not appear to be running at a high enough speed to cool the CPU. The air output is very low when using the “feel” test (placing my hand over the vents). All the fan wires appear to be connected correctly. I have applied thermal paste and tightened the bottom housing bolts down securely. I have also reset the PMU and the PRAM. Any other suggestions? Should I toss it from a second story window?

I am not familiar with tearing down an iMac, so I have no idea what the wiring looks like. I would presume you looked for this information via Google or ifixit.com.
As for monitoring software you have lots of choices, but i think the best of the lot would be iStatMenus or iStat Pro - VersionTracker or MacUpdate. The former can put monitors in the menubar while the latter is a Dashboard widget providing the same information but as a widget. Both fully compatible.
Couldn't tell you what the default idle is on an iMac fan but most likely between 1000 and 2000 RPM depending upon model. Mac laptops idle at around 2000 RPM.

After installing 10.9.4 computer freezes after sleep

After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% CrashPlan menu bar
      0% Fitbit Connect Menubar Helper
      0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy

Qosmio F55 - Freezing after 20 min idle

Hi and sorry for my English,
When I use it, everything is ok, but after 20 min idle it's hanging, ctrl,alt del no respond, only way to switch off is power button.
I changed VGA driver, disable hard disk switch off, disable screen server, run RAM check, still the same problem.
Any idea what is the problem?

It is not easy to say why this happen. We can just speculate why this happen and your answer can be yes or no.
Maybe you should install Vista again using Toshiba recovery image. Test it with clean preinstalled OS.
I am pretty sure after doing this your notebook wills works well and you will not be faced with freezing issues.
What do you think about it?

After Replacing Hard Drive, iMac Freezes after about 40 Minutes.

I have a flat panel 15" iMac which had a bad hard drive. I replaced it with a 250 gig Seagate ATA drive. I used the Disck utility to format it and the computer recognized the correct size of the Drive. After installing OS 10.4.7 on the drive I found that the computer locks-up or frezzes after about 45 minute. I have run apple diagnoxtics and the computer hardware and ram checks out fine. I found that the computer does not lock up if I runit form an external firewire drive with os 10.x and it did not lock-up when I booted form the OS 9 Hardware test cd. I then thought that maybe I had loaded the OS x poorly on th e new drive so I reloaded the OS. The system agin freezes agter the system is on for about 30 + minutes.
Do I need a special drive or size for the G4 flat panel iMac? Is there a setting on the Segate Drive I need to set.
Any Thoughts\
Jim
G4 Dual 1.25 Mac OS X (10.2.x)

Hello,
There should be a Master / Slave setting on the drive. If it shares the same "channel" with your CD-ROM drive, then you may need to set the Hard Drive as Master.
Check your original drive, and see what it was set to. There is a Master, Slave, and Factory setting.
Look at the label on the drive, and compare that to the jumpers (little caps) on the back of the drive by the data cable connector.
Set your new drive to match the same setting your original drive was set to.
If that doesn't work, try your new drive in the external drive enclosure. See if it works right there.
If it still doesn't work right, then perhaps you got a drive with a defect.
If it works fine in the external case, and you have verified that your settings are right when used internally, then you may have damage in the iMac's logic board or hard drive controller somewhere.
But, take a look at the Jumper Settings, and try it in the external enclosure as well. See if either of those fixes it.
Hopefully you just got the jumper settings wrong.
I hope this helps.

Powerbook freezing after software update

I have a Powerbook G4 17" that has been rock solid for two years--it has never had this problem before.
Last week, after installing "AirPort Update 2005-001 (1.0)", the machine has been freezing (with frozen cursor) at least once per day during random work, for example, while using Word, Final Draft, or browsing the web with various browsers. Most annoyingly, it often happens while I'm simply reading the screen and not even causing any action to occur. I haven't installed any applications for the last few weeks. No maintenance or upgrades have occurred other than automatic updates.
Normally, I would suspect RAM in a random crashing incident, but this machine has 2GB of Apple RAM that has been installed the entire time and has never had any issues. I've run Rembra RAM checker against it just to be sure, and it reports no problems.
I've gone through the logs to see if there's anything posted, but the freeze apparently locks the machine up solid--there's no indications in the logs except normal activity from the subsequent reboot.
Just to be thorough, I ran a verify permissions and verify disk, but both were clean.
I'm extremely frustrated about this. Is there any way to roll back or remove this update?
Matt

Okay, turns out it's the lower RAM slot that has suddenly gone wonky. The Machine is stable with just 1 RAM module in the upper slot, and both modules work in the upper slot. The machine has the crashing problem with either module in the lower slot.
Is anyone else having this problem after updating to OS X 10.4.3?

I Have Compaq 6200 Pro Microtower Pc..THE SCREEN TURNS WHITE & FREEZES after 8 -Minutes of usage

I have an HP Compaq 6200 Pro Microtower PC.
I cant use in recent times, about two weeks now. The screen turns white and freezes after about 8-10 minutes of been in use. when this happens, the FAN spins at extraordinary fast speed and this will continue for as long as possible until i have to press and hold the power button to off it.
I have changed processor, powerpack, cooling fan, memory and hard disks but the problem persists.
This PC is an i5- 3.10ghz, 4gb ram, 320gb hdd, ...windows 7 professional 64 bits.
I need urgent help. Technical advice. What could be the course of this and what do i need to DO?

Start the PC in 'safe mode' and check in device manager for new graphics drivers, it sound like you drivers are either out of date or corrupted, the screen going white and computer responding is a symptom of this.
safe mode uses VGA drivers and these should not freeze giving you ample time to complete these steps.

Computer Freezes after 5 minutes or less of uptime

iMac g5 17" Ambient Light Sensor
1.8 ghz, 512 mb ram, 160 gb hd
Computer randomly freezes after 5 minutes or less of uptime, regardless of what it is doing.
Even freezes during Apple Hardware Test
Changed memory
Reset PRAM
Replaced HD
Removed CD Drive
Tested power supply - perfect working condition
I started in verbose mode and this is what I got. Can anyone help me out with what it is telling me?
standard timesplicing quantum is 1000 us
vmpagebootstrap: 124531 free pages
migtable_maxdispl = 70
91 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
using 1310 buffer headers and 1310 cluster IO buffer headers
AppleKauaiATA shasta-ata features enabled
DART enabled
USB caused awake event (EHCI)
FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
CSRHIDTransitionDriver::probe: -v
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
BSD root: disk0s3, major 14, minor 2
jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
AppleSMU -- shutdown cause = 3
AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
CSRHIDTransitionDriver::stop
^^ That is where it freezes. Fans start whirring very loudly.
Any help would be great.
Thanks in advance!

UPDATE: now verbose mode tells me this:
standard timesplicing quantum is 1000 us
vmpagebootstrap: 124531 free pages
migtable_maxdispl = 70
91 prelinked modules
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
using 1310 buffer headers and 1310 cluster IO buffer headers
AppleKauaiATA shasta-ata features enabled
DART enabled
USB caused awake event (EHCI)
FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
CSRHIDTransitionDriver::probe: -v
CSRHIDTransitionDriver::start before command
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
BSD root: disk0s3, major 14, minor 2
jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
AppleSMU -- shutdown cause = 2
AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
Checking disk
Mounting local filesystems
Then it freezes and the fans start whirring.

HP LJ 4250 freezing after RAM check

Similar Messages

Maybe you are looking for