HP LJ P3005 changing formatter number
It's my first post here so HELLO
I've got problem with repair formatters for HP LJ P3005. I've got large number of these with dead eeprom's. Change eeprom IC are not problematic, more problematic is to get right dump for them. I have got batch from different unit (same formatter), I can change MAC addres (using hex editor on batch I have) - it works good. But I cannot change formatter ID to the as on formatter label are. When i try to do so, in report print (config) there is number (decimaly) in place where formatter number should be (number is always the same). I was trying to directly program eeprom outside formatter board (in programmer). I try also use PJL to do so, i can comunicate with printer using LAN (formatter doesn't have LPT port), printers accepts commands but it doesn't change formatter number.
How can i change formatter number?
@adam_lewandowsk
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP
Similar Messages
-
I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!
No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks. -
I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
How can I succesfully change these numbers?
Any UK numbers I have added since changing the contract are working fine.
Thanks!Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf Page 49 has info regarding Dial Assist.
-
When setting up my new iPad and entering my own Apple ID my sisters number appeared on the imessage and facetiming; however her number is not associated with my Apple ID. How do I change the number to my own?
Turn iMessage and FaceTime off, reset the device by holding both buttons until the apple logo appear then let go and wait for it to restart. Then turn iMessage and FaceTime back on and enter the settings again
-
Changing customer number in alv top of page for every new customer
hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a® -
How can I change the number of pages in a spread?
I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text on the right page. I would like to convert to using two-page spreads. However, none of the places the InDesign help leads me give any indication of changing the number of pages per spread.
My problem may be related to having imported from Quark, but if there's an easy way to change this, I'd appreciate hearing about it. Thanks!
-BrianIn the pages panel select the spreads then right-click and check Allow Selected Spreads to Shuffle and also Allow Documrnt pages to shuffle. If asked if you want to maintain the current page arrangement say no.
-
How do I change my number for iMessage and facetime
How do I change my number for iMessage and FaceTime on my iPad mini
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
How do I change the number of significant digits in a slide's digital display?
I suspect I'm missing something really obvious. I want the slide's digital display to show 1.23 instead of 1.23456. Here's what I tried:
1. Drop a Horizontal Pointer Slide
2. Make its Digital Display visible
3. Type 1.23456 into that display
4. Pop up on the Digital Display and select "Display Format..."
5. Change the number of significant digits to 3 and hit "OK"
The digital display still shows 1.23456. What am I missing?
Solved!
Go to Solution.LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only. -
How do I change the number of plot areas in a Mixed Signal Graph
How do I *programatically* change the number of plot areas in a Mixed Signal Graph? I recognize that the developer can choose to add or remove a plot area during edit mode but I want to select between 2 or 3 visible plot areas and scale the plot areas appropriately. Is there a property that tells me how many plot areas (or yscales) there are? I also need a property that I can write to as to set the number of plot areas available.
Aside from manually making too many plot areas and then hiding the unneeded plot areas how can I do this?
JonathanHello,
I don't think that is possible - I searched the property and invoke nodes but didn't find something to do that. This would make a great product suggestion though, which you can submit (it goes directly to R&D) by clicking the word feedback in the bottom left corner of the Contact NI page linked below:
Contact NI:
http://sine.ni.com/apps/utf8/nicc.call_me
Best Regards,
JLS -
How do I change the number of picture columns in a folder
how do I change the number of picture columns in a folder
Never mind. I found the answer. For those who may wonder: you slide the cursor on the bottom right. I looked in IPhoto help but there was nothing there.
-
How can I change a number on my account?
how can I change a number on my account?
Log into your on-line MyVerizon account. Click on the blue More Actions under I Want To. Under Profile, click on Change Mobile Number and follow the prompts.
-
Hi guys, I am struggling to find out how to change the number of rows on a contact sheet on Iphoto , i have selected my photos and i want it to print 6 photos on each page however I am not able to do it. Please help me out, im a Art student and i need to submit my contact sheets for an assignment Thanks in advance guys !!!!!
I don't think you can do that with the Contact Sheet layout. If you have Pages or a 3rd party image editor that supports layers you can do what you want. Or try the demo version of OmniGraffle for Mac It will run fully operational for 14 days.
-
Is it possible to change the number of rows to be displayed in adf query ?
Hello,
is it possible to change the number of rows that are displayed in an adf query similar to an adf form ?
I need to display approx 5 rows per column instead of displaying all the fields in a single column ? Thanks.Thanks , how do you add in the code ,is it something like follows :
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
<af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
required="#{bindings.PrtDesc.hints.mandatory}"
columns="#{bindings.PrtDesc.hints.displayWidth}"
maximumLength="#{bindings.PrtDesc.hints.precision}"
shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
<f:validator binding="#{bindings.PrtDesc.validator}"/>
</af:inputText>
<af:column>
<af:outputtext/>
<af:outputtext/>
</af:column>
</af:query> -
I want to know if there is a way to change the number of...
is there any way to change the number of pages that appear when you hit the history button? I would like to see fifty or one hundred instead of just fifteen. so I don't have to take the extra steps and time to move ahead and then choose today for example.
Bhalerion wrote:
I wonder wheteher Apple can track the device, given the model and the serial number that identifies it?
No. Apple has no way of doing that.
If you configured your iPad with a password, its contents will remain completely inaccessible and secure. To be useful, the iPad will need to be erased first, but there is no way for you to prevent someone from doing that.
If you had enabled Find my iPad in Settings > iCloud prior to giving it to someone, you can locate it using iCloud. However, that will no longer be an option once that someone erases it. -
Hi Guys
I have just changed my telophone provider in the UK from )2. To transfer the number, which I wanted to retain, took 24 hours and I was given a new number by the new provider Virgin Mobile. To unblock my iPhone I had to connect it to iTunes, which recognised my device and changed the telephone number. 24 hours later, my old number returned but iTunes won't recognise the device or allow me to change the number back to the original. How do I reslove this?
Many thanks ;-)If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.
Maybe you are looking for
-
Hi All, I have e requirement where i need to select data from tables....... It was told to me that i can make use of classes instead of tables...... I am working on Inbound delivery in EWMmodule....... can any one through some light on this....... ho
-
Decision service deployment issue
If I create a simple decision service based on the CreditRating rules repository, and I deploy it, my decide actvity fails with the following error: <operationErroredFault xmlns="http://xmlns.oracle.com/BPELProcess1/DecisionService"> - <part name="pa
-
FM to convert any text from one language to other
Hi Experts, 1) Is there any function module to convert text from one language to other??? 2) Is there any function module to check whether the language of a text is English or not? Thank you. Regards, Murali
-
Does apple replace charging cable of online bought product ?..
-
Oracle procedures returning table type supported in JDBC
We have many procedures who return table type return. The JDBC callable statment does not support them.However there is no problem with Ref cursors . How to resolve?.