HP LJ Pro P1102: Stuck on "Out of paper"

Good day,
My HP LaserJet Professional P1102 ran out of paper while printing. I placed more paper in the tray, but since the printer has no "resume" button, I could not get it to continue printing. I deleted the print job from the queue, but the "Out of paper" message is still there. I switched off the printer, removed the USB cable, restarted, but nothing helps. The message stays there. Except for resetting the print system, what else can I try? The printer driver version is 6.9.
Thanks

HP Support

Similar Messages

The paper guide in my K8600 Pro is stuck. Is the paper tray for this printer removable?

The paper guide for my K8600 is stuck, and I have limited access to it with the tray in place in the printer. Is the printer tray for this printer removable?

Hi. Try this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01289431&tmp_task=solveCategory&cc=us&dlc=en&la....
Feel free to provide Kudos if I have helped you!

HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro. Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen. How do I get out of this screen to attempt the connection again?

II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro. The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen. How do I get out of this screen so I can attempt the connection again? Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

Welcome to Apple Support Communities
If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

My mac book pro gets stuck when connected to internet

hello.
I recently changed ISP and router...
I noticed that when I connect to the wifi of my house my mac book pro gets stuck. the color spinning wheel (of death) starts and shows forever and I can't click anything after that. I can turn off the mac only by forcing quitting (holding down the power button).
i checked the hard disc at disc utility and everything is ok
when i restart and turn the air port off it doesn't get stuck...
Please help!

I recently changed ISP and router...
Do you have an apple router at all??
If so which one?
when i restart and turn the air port off it doesn't get stuck...
So you are plugged into the main router by ethernet??
Are you actually running Lion??
If not what are you running? And if it is that all round Stinker Yosemite.. no surprises there.
As far as the computer is concerned clear out all the old wireless names.. shut down the computer.. restart the computer and rediscover the wireless again and put in the password. Does that help??
Old laptop and upgrade install bad news all round.

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best.

How can I get my 2010 mac book pro to send signal out through the mini display port? end signal out through the end video signal out through the

How can I get my 2010 macbook pro to send signal out through the mini display port?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

Laser Jet Pro MFP M476nw printing lines of nonsense until it runs out of paper

I have a Color LaserJet Pro MFP M476nw, and it has begun printing out pages of nonsense symbols until it runs out of paper. This is particularly bad when I print from a website, sometimes from emails, etc., and it is wasting tons of paper. I am extremely dissatisifed with this printer, and it is not even a year old yet. I have tried turning it off and then restarting it, but the problem comes back. Is this normal for this particular all-in-one? I bought it instead of a Brother, which I had last, and expected better for my money.

If the output is repeatable (i.e. exactly the same when reprinting the same document, using the same driver, to the same device), then it is likely that it is caused by a driver (or driver settings) fault.
There may be a more up-to-date driver available, or (depending on the printer model) you may perhaps be able to switch to a driver using a different Page Description Language (i.e. PCL5 or PostScript or PCL6 (the 'marketting' name for the PCL XL PDL), depending on which you are currently using).
If the error(s) is/are random, they are much more likely to be the result of intermittent corruptions of the generated print stream between the workstation and the device (check cables, ports, switches, etc.); it could also possibly be an intermittent problem with the printer itself.

HP Laserjet pro p1102 kills spooler when printing PDF documents

I have a HP laserjet pro p1102 running on Win7 63x PC.
When I print PDF documents nothing happens on the printer side.
Instead the spooler is killed.
When checking the spool file I can see that the documents have been spooled to the printer.
New driver install done, aswell as firmware upgrade.
Acrobar pro 11.0.07.
Please assist.

Hi @UFS-HYRAX,
I see by your post that when printing a PDF the Print Spooler Crashes. I can help you.
Do you have the same results when printing something else, other then a PDF?
Clear the Spool folder and restart the Print Spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Run the Adobe Updates, the latest version is 11.0.09.
Print the PDF file as an "image". From the Adobe print screen, select the button "Advanced", on that screen you see the box for "print as image". Click on that check it. This should resolve the issue.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp officejet pro 8500 a909a frequently shows out of paper when it is not.

hp officejet pro 8500 a909a frequently shows out of paper when it is not. I am .getting rub marks on the top sheet of paper from the rollers.

Your response to my question seems to reflect a rude attitude simply because I asked this question. In response to your response, I have no manual, and the first place I went for info was the HP website - and I got you.
There are three things that I need from you, and none of them is a sarcastic rude attitude. Please provide me with the following information:
     1. Information on how to clean the rollers.
    2. Your name/employee i.d.
     3.  How to contact your supervisor.
Thank you,
B. Van

How do I get a stuck cd out of my drive

How do I get a stuck CD out of my drive on my macbook. It shows up when I first start my computer up. I press eject and it makes some sounds, but doesn't eject. The CD then is gone from my desktop. I have to re-start my computer to see the CD and try again to eject.
Anyone have a solution here ??

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

How much inrush current on HP LaserJet Pro P1102 Printer ?

I have an HP LaserJet Pro P1102 Printer. I want to connect it with the UPS (or maybe power generator). To calculate the rated power of UPS, I would like to know how much the inrush current of this printer model.

Hi gade1234,
Welcome to the HP Forums.
I see that you would like to know the specifications of the printer's power.
I can provide you with the specifications of the printer.
Here are the specifications of the Laserjet P1102.
HP LaserJet Pro P1102 Printer Series Product Specifications
Select Power specifications.
I have also provided the manual for additional information.
LASERJET PROFESSIONAL P1100 Printer series User Guide.
Hope this helps.
Have a great day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Trying to update OS on 2011 macbook pro. stuck on purple screen

trying to update OS on 2011 macbook pro. stuck on purple screen

Ok. Do you remember what you were updating? Like Itunes or a security update. And did you let it complete and install? To install the update, it usually asks for your password and sometime asks you to restart. Here are some options to try. http://support.apple.com/en-us/HT203176

Trying to update the OS on one of my macbook pros. stuck on purple screen

trying to update OS on macbook pro. stuck on purple screen

Hello, danfromlake nebagamon.
Thank you for visiting Apple Support Communities.
I see you are experiencing an issue while updating your Mac. Here is an article that I would go through for this issue.
Mac OS X: Gray screen appears during startup
Cheers,
Jason H.

My macbook pro gets stuck on desktop picture while I am trying to update it

my macbook pro gets stuck on my desktop picture while it is trying to update I have tried several times and it has not worked

my macbook pro gets stuck on my desktop picture while it is trying to update I have tried several times and it has not worked

What driver do I download to operate HP LaserJet Pro P1102 with MacBook Pro 13" (no disc player)?

What driver do I download to operate HP LaserJet Pro P1102 with MacBook Pro OS X 10.9.1 (no disc)?

Have you tried connecting it yet?
If you need a driver you should be prompted to download it.

HP LJ Pro P1102: Stuck on "Out of paper"

Similar Messages

Maybe you are looking for