Hp lj1102w - can't configure for Wifi (HTML Config not working in printer utility)

I've got an HP LJ 1102w and have never been able to get the Print Utility to work. I had to set it up for WiFi with a Windows machine, which wasn't too bad, but the network just changed and I don't have the Windows machine available any more. I've looked at numerous discussions but can't find the right solution. I've downloaded the driver a number of times , then went to the configuration page for the printer, clicked Utility, but when I click "Open Printer Utility", nothing happens. Any ideas?
Thank you! Ron

Thank you for the article, HerelsMartin, but that still didn't change anything. To summarize, I did all of this:
- Deleted old printer from the MacBook
- Reset the printer, confirmed old network was gone
- Set up Java 8.latest, 64-bit, made sure Chrome was updated
- Set Safari as default browser
- Rebooted computer just for kicks
- Went to the new printer, clicked Options, Printer Utility , and got the same result: the "Ok" button got highlighted momentarily and then nothing happened.
I then tried this step at the bottom of the article (see my comments in [..]):
On the Apple menu bar, click Go [there was no "Go" in the Apple bar so I did this through Finder], computer, MAC harddrive, Library, Printers, HP [there was no HP folder, just my 4 printers], LaserJet, click on folder for your printer [there was no folder so I double-clicked the printer and it brought me back to the Printer Utility, and I got the same result as above - nothing - so the rest of this doesn't apply], click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings."
I'm used to Mac doing EVERYTHING for me but this has been extremely time-consuming and frustrating; I'm ready to just go buy another printer. There must be something that can fix this??
Thank you, r

Similar Messages

Dynamic port configured for FILE adapter is not working

Hi,
I have a simple dynamic port in an orchestration that writes a file to a file location. Here is the configuration
================
FilePort(Microsoft.XLANGs.BaseTypes.Address) = "FILE://c:\\TestFolder\\Out";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "FILE";
================
When I run this orchestration, the dynamic port does not write the file to the folder, however I does not show any error either. It is always in "Ready to Run" state where the message is "Queued Awaiting".
I tried all sorts of combinations like FILE:// FILE:\\ File: file:// file:\\ etc... and also without the moniker, just c:\.... I get the same problem.
when I use a static port(subscribed to the same message) it works fine. When I use a static port ALONGWITH this dynamic port then both works fine !!! I receive 2 files.
but when I use only dynamic port it does not work!!
Anybody knows how to solve it.
THANKS IN AVANCE
PLEASE HELP
Surya

It could be becasue you 're not passing in the file name, Try something like this..
SndPort_Dynamic(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\Test1.xml";
But even when you don't pass the file name, i was expecting the erro to be like:
The FILE send adapter cannot open file C:\TestFolder\Out\ for writing.
Details: The system cannot find the path specified.
But try with File Name and restart the host instance after the change.
Or use somehting like this:
FilePort(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\\%MessageID%.xml";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "File";
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

How can we configure in MSS to view Employee work schedule?

Hi,
How can we configure in MSS to view Employee work schedule?
Regards,
Poornima

Hi,
Can you please tell me what is your exact requirement?....
I think in the standard MSS package there is an iview for viewing the workschedule related information like Hours/day, Hrs/week, hrs/month and hrs/year for a position.
However, if you want to view the workschedule for employee, it can easily be configured through the OADP.
You can create a custom Function module for fetching the workschedule for each employee and after creating a custom column, add it to any data view.
Thanks,
Pinki

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Can we get reimbursed for apps that do not work

Can I get reimbursed for apps that do not work?

Hi...
You can contact iTunes support here and see if they will make an exception:
http://www.apple.com/support/itunes/contact/
They usually respond within 24 hours.
Hope this helps.

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Ios 7 wifi connected but not working

my iphone 5s running ios 7 is connected to my home wifi but its not working, but my pc is doing fine on that wifi. and when i try connecting my iphone to other wifi it seems to work without any problem. i've reseted network settings many times and reseted all settings once but it wouldnt work for me. so whats the problem and how can i fix this?

Try power cycling your router. Remove the router from power for about 30 seconds and then start it back up again. After it is finished configuring, try connecting your device again.

My wifi driver is not working with windows 8.1 in my MBA2013?

My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanks

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Link for territory mgmt is not working

Hi All,
We have territory management configured for three custom attributes.
Link for territory management is not working for territory assignment block on account overview screen.
Any hint how we can solve this issue?
Thanks and Regards,
Gauri.

How are you resetting the password?
Resetting User Password in Lion, Mountain Lion & Mavericks
Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

New Hunt Pilot for internal number is not working.

Hi support, I have a problem with the new hunt pilot number that created for internal use is not working. I had create 1 internal number (1090) for the Hunt Pilot number, and there are 2 hunt group member (9382 / 9387). These number will forward all to the mobile number 9382 will forward
all to 90176253579 9387 will forward all to 90133921295 Calling from 1941 to 1090 resulted failed but calling from 1941 to 9382 working and the call forwarded to mobile 90176253579. What might be wrong with the 1090 where i can't call that number from internal. From the DNA, it shows the call should reachable to the destination. I attached the DNA result for your reference.

Hi Mohd Afadzal,
Forwarding setting do no apply for Line Group members. As you mentioned that the Line group members
(9382 / 9387) are configured to forward all calls to their respective cell phones, this will not work.
You can use the HuntPilot's Busy or No Answer configuration to forward calls to an alternate number.
HTH,
Jagpreet Singh Barmi

Earlier installed flash player for x64 yet still not working

Hello:
Over the past 6months flash player installed and it's a working program, then a update comes
along install that then you know it program stops working. I just uninstalled latest version as it was not working
I went back to dl.flash player square "beta preview, for windows X64. Not working.
Where,what is a user to do? I like learning from H.P. Learning which uses flash player so I really
need to get Adobe Flash Player working a.s.a.p.
thanks nedt

Hi, The Square is a beta version and still in testing. You need to Uninstall it if you want the latest released version.
Even tho you have a 64bit OS, you need to use the 32bit browser with any Flash Player version other than Square.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer(s)
http://www.adobe.com/products/flashplayer/fp_distribution3.html Use the EXE Installer for Win/IE and Win/plugin
Use the Administrator Account
Close all browser windows, disable any instant messengers in the system tray
Disable any realtime anti-virus
Run the Uninstaller and then reboot
Run the Installer(s) and reboot.
Reenable any that was disabled.
Test here with browser(s)
http://www.adobe.com/software/flash/about/
You can print this out to make it easier.
eidnolb

Hp lj1102w - can't configure for Wifi (HTML Config not working in printer utility)

Similar Messages

Maybe you are looking for