HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

My ancient HP worked with 10.4.11 and 10.5.1 thru 10.5.5 wirelessly. With 10.5.6 thru 10.5.8 installed, the printer did ot work and only the Adobe printer appeared in the Printer/Fax setup. With 10.5.5, I was experiencing random horizontal gray lines, polygons with gradient colors (cyan and magenta) flashing on and off and smeared dialog boxes and drop down menues. So, I upgraded to 10.5.8 and lost the artifacts and my wireless printer. All drivers are current (Software Update delivered/installed updated drivers today.)
10.6.3 is now installed and I still do not have a wireless printer. The Adobe PDF printer pops up and in the Printer/Fax dialog, it indicates "Kind" as HP LaserJet 4V/4MV Postscript. The Default button is active but all other buttons are grayed out and my printer does not appear.
Summary: the printer works, the wireless router works and the drivers are current.
Q. How can I get my wireless printer back? I need it badly.
Thanks.
Leonard

Kappy, thx.
The driver that is appearing now with the Adobe printer worked fantastically with 10.5.5, HP LaserJet 4V/4MV Postscript. This is from Apple, I believe. My printer does not show up when + is selected in the Print & Fax dialog and the Printer Name/Kind list appears. Only the Adobe is there.
I d'l'd/instld the Gutenprint. I cannot select it until the printer appears in the Printer Name/Kind field.
What is SL? :S
Greg, thx.
The printer is cat 5 to the ISP's wireless router and I am wireless. This has always worked up to 10.5.5. I incrementally d'l'd os upgrades 10.5.6, 10.5.7 and 10.5.8 and found the printer would not appear when I tried to add it. With Leopard, up to 10.5.5, my printer appeared automatically and I just had to make a selection from the "Print Using:" drop down.
Bruce, thx.
AppleTalk was a part of the setup and in 10.6, I cannot find AppleTalk. So you may be right about the IP route. Would Apple change this in the middle of Leopard with 10.5.6 (it worked up to 10.5.5) and not with 10.5.0 or 10.6.0? Would there not be an announcement that AppleTalk printer support was ending? No one in these forums knows that AppleTalk printer support was ended (I first posted in the Leopard forums)?
Sorry for the skepticism. I just did not think this was a possiblity but maybe you are right.
Is there a way to get an Apple reading on this? Should I set up a print server for wireless access? Any other suggestions?
Thanks again all. I much appreciate your help.
Leonard

Similar Messages

Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu

Can print to shared Canon iP4300 via Bonjour - but not with Canon driver

I've searched the forums and therefore know roughly what the problem is, but still need some concrete info please...
Have finally managed to share my Canon iP4300 connected to iMac (10.5.2) via USB and print to it from XP, using Bonjour for Windows. However... when I run the printer assisntent it finds the printer but only offers me the choice of a generic driver. The driver turns out to be labelled "HP Color LaserJet 4550 PS". A postscript driver?!? Well, it works, but I'd really prefer the proper Canon driver (which is already installed - I previously had the printer connected to the PC).
Yet, when I select this driver retrospectively (from the printer-share properties dialogue), I cant print. This, if I understand correctly is because the Canon driver doesn't support Bonjour?
So is there anything I can do? Eg. I've read about the Gimp drivers, but they're only for OSX right?
Maybe this generic "HP" driver will be adequate (haven't printed anything properly yet) but would like to know if anybody has suggestions other than contacting Canon (which I will do anyway).
Cheers

I Have the same Problem as you,
I Have the Canon MP180, and i have the driver on my windows XP Laptop
But when i try to connect to it, using Bonjour (as the printer is connected to the mac) it uses a HP Color LaserJet 4550 PS driver even though its Canon
Does anyone know how to use the proper driver.
It works ok using the HP Driver, but the quality of the printouts from the windows XP laptop seem rubbish
Many Thanks
Alex
P.S if you got this working, can you send me a message back.

Position encoder works with PCI-MIO-16E-4 but not with PCI-6062E, why?

I am using A BNC-2090 to connect Agilent HEDS-6540 position encoder to my PCI-6052E. The application works fine with my 12 bit NI card PCI-MIO-16E-4, But with the new card I get extra counts in my position. ex 1052 pulses when it is only supposed to be 1000 counts in a complete revolution. This setup still works great with the old card, meaning I can just plug into the other card and run the same app on the same computer, just a different device number. I have not been able to figure this out.

You might be seeing the affects of dithing with your signal. I'm not sure why it would be on one board, though not the other, one counter must be more sensitive. Anyway, dithering is caused by vibration or other outside forces that cause small glitches that add to the count total for the counter. There is a way around this, and that is to use a counte convertor. There is a page on this website that tells how to make one. The link is below. I would sugget trying this to see if it will fix the problem.
Brian
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/6f25cba2cd73417786256869005e5fc3?OpenDocument

E-print works on some e-mail address, but not others?

HP Officejet Pro8600
Windows 7 Ultimate
error: "550 5.7.1 Command rejected"
I am able to send and print e-mail print jobs from @hotmail.com and @live.com addresses, but not from @q.com (a Century Link primary domain for customers, not a corporate account). I have set up "Anyone can send ePrint jobs to this printer." These failed print jobs never appear in the ePrint Center listing of Recent Print Jobs. I have tried sending via Outlook 2010 and via the Century Link web based e-mail application -- they both return to me as bounced messages. What's going on here?
This question was solved.
View Solution.

There are certain email clients that are supported for ePrint. I included a screenshot of supported clients. Also, I am adding a link for helpful information about ePrint.

Errors with sdk 1.4.1, but not with 1.3??

I just upgraded to the j2sdk 1.4.1 yesterday from 1.3, and I'm getting a weird compile time error from an import statement that never used to happen. I'm just importing another class I've made, other imports from java.util etc. work fine, but not classes that I have made. Here's the code that gives an error.
import java.io.File;
import java.util.Vector;
import java.util.Enumeration;
import listDir; // only this line gives an error
and here's the error.
C:\kevin\listAll.java:4: '.' expected
import listDir;
^
1 error
Anyone have any idea why that happens? Have the rules changed for importing since sdk 1.3? This worked just fine 2 days ago with 1.3. Thanks for any help.

Hi all,
This is what I found will work with the stand alone classes (not package classes).
1) Do not use import MyClass; in your java app.
2) MyClass should be in the same directory as you java app, unless you have set up your CLASSPATH to point to MyClass.
Here is the listing
//import MyClass;
class HelloWorldApp {
public static void main(String[] args) {
String strNewPwd = null;
System.out.println("Hello World!"); //Display the string.
MyClass myClass = new MyClass();
//Do something to call your class
System.out.println(myClass.getMsg());
It seems to work now. If someone knows where I can find an updated documents on how to include classes on 1.4.1, please reply to this message.
Beside this problem, I am trying to use Tomcat 4.1 to develope a web application. I have similar problems finding my classes. On Tomcat 4.0, the app runs fine. I've try the above work around (not include import MyClass), but still does not work. Any suggestions?

Time capsule USB printer works when I connect via ethernet but not over wifi

I have a USB printer hooked up to my new Time Capsule. If I turn off my wifi and connect to the Time Capsule with an ethernet cable it works fine. When I try to do the same thing over wifi (even when I'm sitting next to it) it cant seem to make a solid connection. Most of the time it just says Printer Paused, but sometimes it will work, other times the printer just clicks, or starts but then stops. Other than that my wifi connection seeems pretty good.
Is there something with the settings with my older "08 MacBook and the newer Time Capsule?
Any help is very much appreciated,
Thanks

Very interesting one..
Did you upgrade install ML into the MB??
It sounds to me like it has corrupted the wireless drivers.. and I think you will need to do a clean install.
If you have internet working over wireless I see no reason for this to happen though.

Samsung CLP300 prints via old G4 Power(10.4) but not with MacBook (10.5.5)

I bought an Airport Express so I wouldn't have to keep my old power-hogging G4 running as a print server. If I try and print wirelessly to my Samsung CLP300 printer with the G4, it works fine. But when I try and print via my MacBook (10.5.5), the print queue just stalls at a certain percentage. The only solution I've found is to unplug the Airport Express and then plug it in again, but schlepping up to my 3rd floor and waiting 5 mins for the Airport Express to start up can be a real PITA.
Any solutions?

I'm also having issues with Airport Express 802.11b/g, firmware 6.3 that used to worked fine with my Brother MFC-2040 in 10.4 but now struggles in 10.5 with my new Samsung SCX-4300. Like you, it will print one job fine, then it stalls on the next. Printer dialog shows "Printing page 1, 14% complete..." Then it gives up and the dialog shows "Printer Paused". When I resume the printer and resume the job, an error message pops up, "Operation Could not be completed. client-error-not-possible". But when I click OK, the dialog returns that shows "Printing page 1, 14% complete"
I reinstalled the latest printer driver (1.2), deleted the old printer profiles and created new ones for the printer, and followed the directions on the Airport printing troubleshooting guide. I had no problems printing on a Brother MFC-2040 with OS X 10.4. I suspect this is a Leopard issue. Any thoughts?

Formatting of a chart works on a vi in labview but not with the same program as a .exe

I am trying to make a labVIEW program into an exe using the application builder. I have managed to fix the other problems I encountered but there is one that I cant figure out. On the main screen of my program there is a chart with a drop down menu that displays different information. There is a subVI that I made to change the size and number of columns of the chart depending on the item chosen in the drop down menu. This seems to work fine in the program when run using labVIEW, but once I made it into a .exe file, the width and number of colums seems to have defaulted and will not change for each item chosen in the drop down menu as it did before. I am sure that I included the vi
that controls this, but i cant seem to get it to work with the program as an exe.

I cant find the runtime menu file. Maybe I explained my problem incorrectly. I am not using a runtime menu, I am using a menu ring. . .if there is any difference. I am attaching an example of what I suspect is causing the problem in my program. If you still think I need to include the runtime menu file, can you tell me where I can find it?
Attachments:
table_example.vi ‏52 KB
table_formatting.vi ‏117 KB

ITunes Home Sharing with Apple TV2, works with one Win 7 PC but not with the other

Hopefully someone out there can help with this, I have gone through all of the troubleshooting procedures that Apple provides, and have spoke to thier 'fast track' technical services department and we cannot resolve this.
My probelm is that Apple TV does not recognize my Win7 PC that has itunes running in Home Sharing mode. In order to test my router, network configurationand the Apple TV, I put iTunes on a laptop on my network running Win7 as well, and the Apple TV had no problems sharing with that computer. I have opened all of the ports in my firewall that Apple recommended, and tried to make it work both with and without my anti-virus software, but still no sharing of iTunes with this computer. We are working with the latest version of iTunes and Apple TV, both updated today.
Has anyone run into this problem?
Thanks
S McD

Yep - have had the same problem, especially since IOS5 came about and no solution has worked. I've fought this one for a while, I come back to it every once in a while when I see something that might be a new tack but no joy. I've also tried all that stuff, but none of them fix it.
I can tell you a couple of things I have found out along the way:
First off, there is some kind of issue with the Apple Mobile Service that causes it to not stay working. If you stop the service and start it you may be able to make the sharing show up for a bit, but it will eventually disappear.
Secondly, there may be a network routing factor to this too. Apple doesn't like to use the same kind of protocols as many sharing schemes do, instead preferring something known as "Bonjour". Bonjour uses multicast routing, and appears to either be programmed badly or in a non-standard way - or maybe there just is no standard. In any case what you find is that it just doesn't work, and there is no current fix.
Keep trying though, maybe you can figure it out. If you do, please come back and post what you did, I'd be very interested. Sorry I couldn't be more helpful, but I can at least tell you that you're not crazy, there are others out there having the same problem with the same bleak outlook. By the way, mine used to work until iOS5.

Lion, Mail, and Outlook. I can't get preferences in Mail to accept Outlook as the default mail program. Outlook works fine within the Office world but not with Preview or Lightroom (to choose two that I've tried today). Any ideas?

As per the heading, I can't get Lion to accept Outlook 2011 as the default mail program. When I go through the Preferences in Mail to set the detault mail program, I can see Outlook, I can select it, but it doesn't "stick." As soon as I reopen Mail, Mail is the defailt mail program again. It also doesn't work though the Outloook Preferences menu. I'm a recent transfer to Macs, and could use some help. Any ideas?
Thanks!

There is a forum specifically for MS Office for Macs, just click Office for Mac Product Forums and post there, they should know.
If for some reason you don't want to do that you have 90 days of free AppleCare telephone support, this might be a good time to use it. You can find the number in your owners manual.

I am able to see the printer as available with this adobe community sheet but not with pdf files

my printer hp3510 doesnot show as avaible printer in print pop up menu. hence I am unable too print.

The person who holds the copyright to it in the UK hasn’t given Apple permission to sell it there; if desired, click here and fill out the form.
(116905)

JVM Crash: with jre 1.6.0_18 but not with 1.5.0_14

Hello everyone,
I got the problem that my JVM crashes when I am using the jre 1.6.0_18 but the same code runs with an jre 1.5.0_14. The code contains some JNI parts and
is compiled with a JDK 1.5.0_14. The crash can not be reporduced within a debugger. The crash either occurs in the jvm.dll - as in the error log below - or when acessing the ntdll.dll.
Any help is appreciated!
Thanks in Advance!
Here is the JVM crash report:
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d979ba7, pid=10932, tid=12276
# JRE version: 6.0_18-b07
# Java VM: Java HotSpot(TM) Client VM (16.0-b13 mixed mode, sharing windows-x86 )
# Problematic frame:
# V [jvm.dll+0x179ba7]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x02afa800): VMThread [stack: 0x02be0000,0x02c30000] [id=12276]
siginfo: ExceptionCode=0xc0000005, reading address 0x706d7953
Registers:
EAX=0x706d7953, EBX=0x00000000, ECX=0x37387a88, EDX=0x00000000
ESP=0x02c2f79c, EBP=0x02c2f7ac, ESI=0x00000080, EDI=0x02bc7460
EIP=0x6d979ba7, EFLAGS=0x00010246
Top of Stack: (sp=0x02c2f79c)
0x02c2f79c: 02c2f890 373851d0 02c2fa8c 02bc7464
0x02c2f7ac: 02c2f7c4 6d8d8c66 02afaab4 00000000
0x02c2f7bc: 02c2f7f8 37387a88 02c2f7dc 6d96b704
0x02c2f7cc: 02afaab4 00000000 02c2f7f8 02afaab0
0x02c2f7dc: 02c2f840 6d8b3449 00000000 02c2f7f8
0x02c2f7ec: 05b30400 02c2f890 00000001 00000000
0x02c2f7fc: 02c20000 0000ffff 00000000 00000000
0x02c2f80c: 00000000 6da187a4 02c2f890 02c2fa8c
Instructions: (pc=0x6d979ba7)
0x6d979b97: 80 79 05 48 83 c8 e0 40 8d 1c 40 8b 07 8d 04 d8
0x6d979ba7: 39 08 75 09 0f b7 58 04 3b 5d 0c 74 34 42 83 fa
Stack: [0x02be0000,0x02c30000], sp=0x02c2f79c, free space=13d02c2f310k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x179ba7]
V [jvm.dll+0xd8c66]
V [jvm.dll+0x16b704]
V [jvm.dll+0xb3449]
V [jvm.dll+0xb3562]
V [jvm.dll+0x1db5f5]
V [jvm.dll+0x1db9ca]
V [jvm.dll+0x1a1af4]
V [jvm.dll+0xc834f]
V [jvm.dll+0xa443c]
V [jvm.dll+0xc9398]
V [jvm.dll+0x7e7cb]
V [jvm.dll+0x1f442b]
V [jvm.dll+0x1f6ed3]
V [jvm.dll+0x1f615e]
V [jvm.dll+0x1f64ac]
V [jvm.dll+0x1f68d2]
V [jvm.dll+0x17f9cc]
C [msvcr71.dll+0x9565]
C [kernel32.dll+0xb50b]
VM_Operation (0x0a09e2dc): GenCollectForAllocation, mode: safepoint, requested by thread 0x05c54800
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x05b30400 JavaThread "persistance manager service activator" daemon [_thread_blocked, id=6588, stack(0x0a230000,0x0a280000)]
0x05b38400 JavaThread "task queue worker" daemon [_thread_blocked, id=9788, stack(0x0a1e0000,0x0a230000)]
0x05c5b800 JavaThread "PSJ-Subsystem" [_thread_blocked, id=11024, stack(0x0a140000,0x0a190000)]
0x05c5a400 JavaThread "HDM-Subsystem" [_thread_blocked, id=8296, stack(0x0a0f0000,0x0a140000)]
0x05c61000 JavaThread "CSM-Subsystem" [_thread_blocked, id=5272, stack(0x0a0a0000,0x0a0f0000)]
0x05c54800 JavaThread "XPS-Subsystem" [_thread_blocked, id=10064, stack(0x0a050000,0x0a0a0000)]
0x05c59400 JavaThread "GUI-Subsystem" [_thread_blocked, id=7596, stack(0x0a000000,0x0a050000)]
0x05c5f800 JavaThread "TimerServices" [_thread_blocked, id=5760, stack(0x09fb0000,0x0a000000)]
0x05af9800 JavaThread "Thread-2" [_thread_in_native, id=11624, stack(0x03d30000,0x03d80000)]
0x02b0b000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=8092, stack(0x02dc0000,0x02e10000)]
0x02b07c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2696, stack(0x02d70000,0x02dc0000)]
0x02b06400 JavaThread "Attach Listener" daemon [_thread_blocked, id=1444, stack(0x02d20000,0x02d70000)]
0x02b05000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=10896, stack(0x02cd0000,0x02d20000)]
0x02afd000 JavaThread "Finalizer" daemon [_thread_blocked, id=8084, stack(0x02c80000,0x02cd0000)]
0x02afbc00 JavaThread "Reference Handler" daemon [_thread_blocked, id=10636, stack(0x02c30000,0x02c80000)]
0x002a7000 JavaThread "MasterControl" [_thread_blocked, id=11412, stack(0x008c0000,0x00910000)]
Other Threads:
=>0x02afa800 VMThread [stack: 0x02be0000,0x02c30000] [id=12276]
0x02b0d000 WatcherThread [stack: 0x02e10000,0x02e60000] [id=11048]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x002a61c0] Threads_lock - owner thread: 0x02afa800
[0x002a65d0] Heap_lock - owner thread: 0x05c54800
Heap
def new generation total 4928K, used 4783K [0x22970000, 0x22ec0000, 0x27ec0000)
eden space 4416K, 100% used [0x22970000, 0x22dc0000, 0x22dc0000)
from space 512K, 71% used [0x22dc0000, 0x22e1bf30, 0x22e40000)
to space 512K, 0% used [0x22e40000, 0x22e40000, 0x22ec0000)
tenured generation total 10944K, used 697K [0x27ec0000, 0x28970000, 0x32970000)
the space 10944K, 6% used [0x27ec0000, 0x27f6e4e0, 0x27f6e600, 0x28970000)
compacting perm gen total 12288K, used 5037K [0x32970000, 0x33570000, 0x36970000)
the space 12288K, 40% used [0x32970000, 0x32e5b4c8, 0x32e5b600, 0x33570000)
ro space 10240K, 51% used [0x36970000, 0x36e97b58, 0x36e97c00, 0x37370000)
rw space 12288K, 54% used [0x37370000, 0x37a04ce0, 0x37a04e00, 0x37f70000)
Dynamic libraries:
0x00400000 - 0x00424000      c:\windows\system32\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da97000      C:\Program Files\Java\jre6\bin\client\jvm.dll
0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      c:\windows\system32\WINMM.dll
0x6d7b0000 - 0x6d7bc000      C:\Program Files\Java\jre6\bin\verify.dll
0x6d330000 - 0x6d34f000      C:\Program Files\Java\jre6\bin\java.dll
0x6d290000 - 0x6d298000      C:\Program Files\Java\jre6\bin\hpi.dll
0x76bf0000 - 0x76bfb000      c:\windows\system32\PSAPI.DLL
0x6d7f0000 - 0x6d7ff000      C:\Program Files\Java\jre6\bin\zip.dll
0x6d610000 - 0x6d623000      C:\Program Files\Java\jre6\bin\net.dll
0x71ab0000 - 0x71ac7000      c:\windows\system32\WS2_32.dll
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
0x71aa0000 - 0x71aa8000      c:\windows\system32\WS2HELP.dll
0x6d630000 - 0x6d639000      C:\Program Files\Java\jre6\bin\nio.dll
0x02eb0000 - 0x02f59000      C:\mod_s14\bin\stlport.5.2.dll
0x7c3a0000 - 0x7c41b000      c:\windows\system32\MSVCP71.dll
[snip]
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2094652k(589592k free), swap 4032296k(2558960k free
vm_info: Java HotSpot(TM) Client VM (16.0-b13) for windows-x86 JRE (1.6.0_18-b07), built on Dec 17 2009 13:35:55 by "java_re" with MS VC++ 7.1 (VS2003)

I have the Java console open and after 10 seconds it closes and the applet becomes unresponsive. Usually when an applet crashes, some error messages show up in the console before it closes. That does not appear to happen in this case.
If I load a webpage with an applet (http://java.sun.com/applets/jdk/1.4/demo/applets/Fractal/example1.html) and then move to a non-applet webpage, and have the Java console up, it stays up (alive) for about a minute before it closes. In the case of my applet it closes much faster.
When I refresh, the second instance of the applet might be starting in the same process as the first process which is in the middle of closing (I am new to Java and JNI, so I might be using the wrong terminology). But with JRE 1.6.0.25 I was not seeing the crash on refresh. It manifested itself with the update to JRE 1.6.0.31
I did realize the codebase was wrong. This is what I have now:



<![if !IE]>
<object
id="myApplet"
name="myApplet"
type="application/x-java-applet;version=1.6"
width="800"
height="600">
<![endif]>

Adobe Reader docs appear washed out and faint with Firefox 6.0.1, but not with Internet Explorer. Running Windows 7

The PDF docs opened in Firefox are very light and the color of print is multicolored shaded. Different parts of display different shades of any color but black. Just loaded newest Adobe Reader, did not help. Previously running Reader 9. Haven't had a problem till Firefox 6. If I fool with the Window Color in 7 I can effect the PDF doc. Lowering saturation level to nothing helps, but doesn't fix problem.

The PDF docs opened in Firefox are very light and the color of print is multicolored shaded. Different parts of display different shades of any color but black. Just loaded newest Adobe Reader, did not help. Previously running Reader 9. Haven't had a problem till Firefox 6. If I fool with the Window Color in 7 I can effect the PDF doc. Lowering saturation level to nothing helps, but doesn't fix problem.

Ora-01882 "timezone region not found" with 3.0.03.97 but not with 3.0.03.45

I installed the version 3.0.03.97 of SQL-Developer and now get an ora-01882 when I connect to a DB. I don't get this Problem when using version 3.0.03.45.
Putting "AddVMOption -Duser.region=DE" in the sqldeveloper.conf didn't solve this problem though.
The problem happens both with the connection-type "simple" and "TNS".
I am on 32bit Windows 7 Professional.
Java JDK is jdk1.6.0_23.
Oracle Instantclient is 11.1.0.1.0
Database is version 9.2.0.1.0
Anyone got this problem too? What changed between both versions of the SQL-Developer?
Regards
Markus
Edited by: Charon on Mar 24, 2011 11:52 AM

I found something but need confirmation:
SQL-Developer says my timezone is "Europe/Berlin".
If I run this:
SELECT *
FROM V$TIMEZONE_NAMES
WHERE tzname LIKE 'Europe/%'I get no hits with "Berlin" in it but quite a few others.
One of them is "Europe/Istanbul".
If I now add "AddVMOption -Duser.timezone=Europe/Istanbul" to my sqldeveloper.conf I can finally connect to my Database!
So does version 3.0.03.97 of SQL-Developer somehow check this view for available timezones? Did the previous version not check this? Whats the solution for me then? (using the Istanbul timezone here doesn't seem right to me)
Regards
Markus

HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

Similar Messages

Maybe you are looking for