HP Logo Not appearing issue

Hello,
I have HP 15-f018ca Energy Star.
It came with Windows 8.1 but i did not liked it so i clean installed Windows 7 Home Premium 64 Bit.
After installing this i'm having this issue.
HP Logo at the start up it is not appearing. Is there anyway i can fix this?
Tried Loading default BIOS but then i can not load into windows-7.
Thanks

Hi there @jateen89,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you downgraded your system to Windows 7 from the factory installed Windows 8.1, and now the notebook is not starting properly.
After some quick checking, I found that the only supported operating system for this notebook model is Windows 8.1, which means that there are not any drivers specifically customized for this system for running under Windows 7.
Did you make a set of recovery disks, prior to doing your downgrade?
Also, are the original recovery partitions still intact? If so, you can always do a System Recovery back to the factory installation.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Hello!
The cloud logo means that you purchased these songs from the iTunes Store but haven't downloaded them to your computer yet. If you want, click the clouds to download the songs and the cloud logo's will disappear for those songs too.

SAPscript to PDF in SAP 4.0B - Logo Not appearing correctly

Hi Gurus,
I have an issue where I am converting a Sapscript to a PDF using CONVERT_OTF Function Module. The PDF is being generated correctly but the logos are appearing in other places or not appearing at all. The SAP Version is SAP 4.0B (Really old one) so the function modules available to convert from OTF Data to PDF are very limited.
I searched the web and SDN and found several threads but all of them in version 4.6x on wards.
Any idea why this is going on and how can I solve it?
Thanks & Regards,
Ernesto.

Hi,
While calling FM CONVERT_OTFSPOOLJOB_2_PDF, pass import parameter Country Key to SRC_SPOOLID.
i.e. SRC_SPOOLID-RQTELELAN.
I feel this should solve the problem.
Best regards,
Prashant

Problem while sending mail -Logo not appearing.

Hi,
The requirement is to send a message as a text and not as a PDF attachment to a recepient.
( I am converting the smartform code into HTML format - I referred to url
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp which contains the rough code ) and am sending the mail to the
recepient.
The mail is getting generated, the text of the message is getting properly formatted as desired.
But the company logo is not appearing .
I am able to see the logo when I send the mail to my employer's mail server outlook, but am unable to see
the logo when I send the mail to the customer's mail server in outlook.
Can anybody suggest what could be going wrong?
Regards,
Girish.

Hi Brad John,
Thank you for your reply.
I tried 2 methods :
1. I attached the logo to the smartform and sent the mail to my employer's mail id and
my customer's mail id.
I am able to get the logo and text in my employer's mail server but in my customer's mail server,
the text and logo are getting split into 2 attachments in the body of the mail
instead I require the text and logo in the body of the mail.
2. I removed the logo in the smartform and tried typing the url in the smartform window text as suggested in
    URL http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2273. [original link is broken] [original link is broken] [original link is broken]
   The logo does not appear iin my employer's mail server but in my customer's mail server,
   all I get is a text of the URL.
Can you please suggest the possible reason for this problem
The url of the IMG tag is accessible externall.
What is meant by drop/reference MIME data in a location that is external to corporate firewall.
Please elaborate.
Many thanks for your time and patience.
Regards,
Girish.

"Oracle WebCenter Interaction" Logo not appearing

Hi All,
Im using Oracle WebCentre Interaction , in my wci the upper logo is not there. Can anyone tell that how to make it appear.
Please help me in resolving this issue.

Hi,
It sounds like you are talking about the header.
Make sure your Experience Definition has the "WCI" specific header.
If you need help with this I would suggest opening a support case.
Please note these forums are not monitored regularly by WCI Support Engineers.
Scott - Oracle

RIM LOGO NOT APPEARING WITH FACEBOOK MESSAGES

please help, RIM logo is not being appeared while posting messages on facebook
regards.
Idrees

Okay. Please go to Facebook on your computer, login, then go to Account Settings. under Account Settings, click Security on the left panel then look for Recognized Devices if you're setup for it.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Arch logo not appearing when booting

Hi guys I know this is probably for most of you not a problem but I like the logos and want them to have at boot up
So here is my situation:
I have a Samsung N150 netbook with an Intel Atom N450 Core, a GMA3150 Accelerator and a display that supports a resolution up to 1024x600 (although it is possible under windows to put it on 1024x768 too but its not made for that and doesnt look good)
I am using grub and I have read that you need to use the frambuffer to be able to see the logos (with the parameter vga=...). However this doesnt make the logos appear, here is the vga setting that I put in the kernel line: vga=789
He also supports only a maximum solution of 800x600 when booting with grub (is there a way to make it with 1024x600?), after udev starts he sets the display resolution to 1024x600. still the logos are not there
The netbook that I had before this one (acer aspire one) did show the logos and it had a very similar hardware (atom core, gma3xxx accelerator) so I think it should be possible with this one too..
any idea what I can do?
Last edited by Triver (2011-08-17 22:46:41)

Long story:
- some people complained that Arch doesn't ship vanilla packages but alters them unnecessarily https://bbs.archlinux.org/viewtopic.php?pid=940787
mhertz wrote:Then, and imho even worse, xorg patched to show a different desktop background and the kernel's tux logo exchanged with an arch logo!
https://bugs.archlinux.org/task/24513
and a response https://bugs.archlinux.org/task/24654
The xorg patch was removed too, as it wasn't needed anymore - http://projects.archlinux.org/svntogit/ … 5ec326df7c
https://bugs.archlinux.org/task/24514
Yes, it's the same logo. No, it's unlikely to be coming back.
Last edited by karol (2011-08-17 23:02:31)

Company logo not appearing in PDF (generated from Web Report)

Hello all,
I have created a Web-Report using WAD and have my company logo followed by the reporting values. When I export this report as a PDF, I get to see all the values etc except the company logo. Could someone help me out with this issue pls.
Thanks,
SD

Hi Sebastian,
We've had the same issue and found no solution for this. There just isn't a way to add an image to a by SAP generated PDF file. The only thing that did work was adding the image to a report and adding the report to the web template. In that case the image is printed but on a seperate page.
Kind regards,
Alex

LOGO NOT APPEARING IN MAIL SIGNATURE

When I paste a logo in the signature of my mail, it shows as an attachment but does not show the logo... however only when i click it shows the logo..
whereas in windows pc I have used for long time, it shows a logo clearly so when my clients look at my signature they already get the logo near my signature
in MAC however, it shows as an attachment, and it will be left to the discretion of reader to see my logo or not!!
it is very disappointing to see this!
any one can provide me the guidance?
Chandrashekar

Hi,
Check the logo exit in OAER tcode in QHR..if not you need to transport to QHR
Refer to this link..
ALV-logo

Rim logo not appearing with my facebook messages

please help, while posting facebook messages its not showing the RIM logo.
regards.
Idrees

If you view the post via a PC, what does it state under the post... as in "via web" or what?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Logo not appear

hi experts,
I created a smartforms which need to be sent via e-mail. So far, it is possible. But, the only problem is in the smartforms that there is a logo in a graphical format. After the PDF file created the logo is missing. Before that happened, there is an error that says unable to parse the image.
I don't know what happened. Please help me.
thanks in advance.

hi,
Check if the logo is uploaded in the system in the right format.it should be in .bmp or .tiff format.Transaction se78
Regards,
Sourabh

Logo not appearing when connecting to xp windows

Ued to work fine before latest upgrade to phone. Now unable to transfer pics as phone is not being detected.

Welcome to Apple Discussions. Next time you might want to post this in the Connected to Windows group.
I would start with the information in this article: http://support.apple.com/kb/TS1567
and if it still is having problems, this article: http://support.apple.com/kb/TS1502

TS1369 Since I have connected by iphone 5s to my computer my 4th gen shuffle is not appearing in itunes when it is connected. It doesn't seem to be a USB issue as the ipod is charging when it is connected to the PC.

Since connecting my new 5s my 4th gen shuffle is not recognised by itunes.
The device is not appearing in 'my computer' but is receiving power as it is charging.
I never had this issue with my 4s.
I have tried the troubleshooting with no success.
If anyone has any suggestions on what settings I need to change or what I need to do this would be greatly appreciated.
Thanks for your help.

Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Also see these (if you haven't found them already):
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16

Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone.

I have a problem with my apple tv, I can watch my music of my mac in the TV but I cant transmit music or video from my mac to my apple tv because not appear the logo Apple Tv in my itunes. Somebody help me?

I have a problem with my apple tv, I can watch my music of my mac in the TV but I cant
transmit music or video from my mac to my apple tv because not appear the logo
Apple Tv in my itunes. Somebody help me?

Welcome to the Apple Community.
The Apple TV 2 doesn't show up under devices like the Apple TV 1, to send video and music to the Apple TV you need to use the Airplay Option which appears in the lower right corner of iTunes.

HP Logo Not appearing issue

Similar Messages

Maybe you are looking for