HP M1319 MFP laserjet scan issues

First off I'd like to thank all the admins and HP reps here for the fine work you all do...
Ok to start, my wife has an HP LaserJet M1319 MFP Series, We installed the software from the disk but failed to load, So I went here to HP and downloaded the software for this modle, and It installed ok.
But the problem were having is after she scans an Text document it only gives the option to save as a bitmap, TIFF, JPEG and another picture file. We saved it as a TIFF and tried to open it in word pad and it opens as a text as it was scaned then we saved it as a rich text file and it opens in MS word, But when we scan multi pages it wont open them all, just the first page,
What we want to do to make it easier is to save as an MS Word file Or a PDF, Much prefer a pdf. Is there software for that, and is there software update or a certain version that will let us save in Text format not in a picture format ?
and if there is a disk for windows 7 I'd like to get it, or download it.
Thank you
really need this asap

Hi,
What type of operating system do you use? is it Windows 7 32 or 64 bit?
http://whatsmyos.com/
A Full Feature softwre is only available from a 32 bit OS, for a 64 bit OS only basic scannign from the OS is available. a such only support basic scan functionality from the OS software, which only support JPG, BMP, PNG and TIF.
OCR scanning is not supported on Windows 7, which means that scanning to an editable text file cannot be done with the provded HP software of your printer, for a such a 3rd party software will be required.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Hp laserjet pro 200 color mfp m276nw scan issue

Hi I have problem to use scan software from my PC to scan document and save to my PC. Every time a error message pop up : Scanner Unreachable. I am using wireless and can print without any problem, even I turn off the firewall and connect with the printer cable, it still doesn't work. please help me solve the issue, I use scan function a lot. Thanks in advance.

Hi , Welcome to the HP Support Forums! I see that you're experiencing scanning issues with your HP LaserJet Pro 200 color MFP M276 Printer. I would be happy to assist you with this. If you're able to print, but cannot scan. It sounds like the HP Software is corrupted. The Print and Scan Doctor might be able to correct the issue for us.Please download and run the Print and Scan Doctor, it will likely diagnose and resolve the issue you are experiencing. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages) If the Print and Scan Doctor doesn't fix the issue, please uninstall and reinstall the HP Software.HP Single-Function and Multifunction Printers - Uninstalling the Printer Software.Important! Please use the Printer Install Wizard. The HP Printer Install Wizard automatically finds the best available print driver for your HP Printer. Download and run Printer Install Wizard () a free tool from HP. When this link is clicked, HP Printer Install Wizard is downloaded using your Internet browser's download capabilities. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

HP LaserJet Pro MFP M127fn Scanning Issue

Purchased a HP LaserJet Pro MFP M127fn Using Easy Dental Software with this unit. Easy Dental will list unit in it's drop down box but will not open a box for scanning. Easy Dental says I need a WIA driver? The unit WILL scan on it's own outside of Easy Dental Software

Hi @jaimelalone ,
I see that you are having issues getting the printer setup on the network. I would be happy to help you.
Usually the standard length for a Ethernet cable is 100 ', with a direct connection from the printer to the router, depending on the quality of the cable.
Here is a document for A 'Network Product(s) Not Found' Error Displays for the HP Color LaserJet Pro MFP M176n Printers and...
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1536dnf MFP scanning issue Windows 8.

Printer: HP Laserjet 1536dnf MFP
OS: Windows 8
How printer is hooked up: Ethernet cord into router
I recently upgraded to Windows 8, and my printer is connected via ethernet cord into the router and it was previously working just fine. Now when i go to click on the "HP LJ M1530 Scan" program it gives me the error "The HP LJ M1530 MFP Series Scan was not found.". I can print just fine etc, just cant scan. Any help will be appricated.
Thanks in advance.
This question was solved.
View Solution.

Hi,
Did you uninstalled the software and installed the Windows 8 software after upgrading the OS?
If not, go to Programs and Features and uninstall the current HP software.
Then download and install the latest software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-86005-3&cc=us&dlc=en&lc=en&...
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Paper Jam and Scanning issues for the HP Officejet 6600

Had to warranty my printer for same issue and refurbished one is worse.

Hi @Uguessedit,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 refurbished printer is worse than your previous printer, but I am happy to help!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copying a Multipage Original in Order (Collating).
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
What type of scanning issues are you having? Are you getting any errors?
In the meantime, please see this guide, A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri....
Thank you for posting, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Acrobat 7 Pro Windows Scanning Issues for Non-Admins

Hello,
We have several users that are having scanning issues. WE recently removed administrator rights from our end users and now for some reason Acrobat 7 Professional doesn't show any scanners in the list when they try to create a PDF from the scanner. Windows shows the scanner in the scanners and cameras section of the control panel. Any help would be appreciated.
-Jared

I was able to install it on Win 7, even the 64-bit version. But neither AcroTray or the Adobe PDF print driver for AA 7 works on Win 7. That means you have to use workarounds to get things done if you succeed in installing. it is time for you to probably buy a new copy.

Where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

where is a twain-compliant device so my cm1312nfi mfp will scan? (windows7 pro op system)

Officejet 5740 Scanning Issue

I am having scanning issues. I just purchased this printer in February 2015. I am trying to figure out how I can use the document feeder to scan. When I place the documents into the document feeder and press scan and then choose the networked computer I want to scan to, the document feeder will not feed the documents onto the glass. The scanner scans (with no document on the glass) and I get a blank scan sent to the computer as a .jpg. I want the scans to come through as .pdf. So in theory this is a 2 part question.
1. How to scan using the document feeder?
2. How to save the scan as a .pdf?
This question was solved.
View Solution.

Thanks for your help. I figured that out on my own, not the resolution I was hoping for. Sometimes I bring my work laptop home and didn't want to install the Full Software onto my work laptop. But if that is the only way I can resolve my issue, then I guess it will have to be done.
Thanks again!

Gmail Scanning Issues – WorkCentre 7120 - 7125

Several posts have been discussing the recent changes in the Gmail security parameters and the issues it is causing with their multi-function devices. We are hoping this information will get you scanning once again with an alternate method while the email issue is being researched.
This focuses on the WorkCentre7120 7125 product family in relation to the scan to email feature with Gmail in which the Xerox device produces different error and fault codes relating to communication.
Recent changes in Gmail security parameters have changed the authentication requirement which is causing the Multi-Function Printer to have authentication failures. Gmail has two open Authentication methods (OAuth and OAuth2).
To isolate the cause of your errors and confirm if the issue is the Gmail server authentication, please use this test which will take you through each of the steps. If the telnet test fails as outlined, then the options are to install scanning to a network folder or to a mailbox (folder).
These instructions are intended for an advanced user.
Perform a Telnet Test to Confirm the Cause of the Issue and Review Alternate Scanning Methods
The Gmail Scanning Issue document also includes step by step (all with screen shots) on other forms of scanning the device supports (essentially alternative methods).
The issue is now in Engineering and a possible resolution is being developed but supplied in the linked document above are alternate methods of scanning for customer use.
NOTE – This does not address or outline the use of any other ”free” email providers.

Mitchell the user can use Restricted Gmail SMTP server : aspmx.l.google.com :25 with out authentication and with out SSL and TLS ssl encryption but the can scan to email can only be sent to Gmail or Google Apps users . Regards

Photosmart B110a scan issues

I just upgraded my computer to the new Windows 10 and since the upgrade i hav'nt been able to use my printer and scanner. It comes up with errors saying software not installed and errors with connecting with scanner. Is there an upgrade available?

Welcome to the HP Community , I wanted to pop by to help you with the scanning issue you're having with Windows 10. You should be able to run the HP Printer Install Wizard for Windows, which will search for the correct drivers and software for your printer on the new OS, and install the scanning software as a part of the package. Try scanning when you are done installing, and let me know what happens! Good luck

Laserjet pro 200 color mfp m276nw Scan to Email issue

My laserjet pro 200 color mfp m276nw claims email is not set-up. I have entered in the e-mail addresses to send the scans to, but it still claims it is not setup. How do I setup this feature? I already have the "Send an Email" feature working where it sends the scan "from" my e-mail, but I want to use the Address Book feature and just send to a specific e-mail.

HI @Username57 ,
I see by your post that you what to setup the scan to email on the printer. I would like to help you out with this issue today.
I have provided a document for How to Scan: From the Control Panel. Select Scan to an email.
If you are still having issues then go into the printer's Embedded Web Server by typing in the printer's IP address in your web browser and setup a Static IP and set the DNS address.
Click the Network tab, then click on IP4 config on the left side.
Click on Network Address (IP)
Select Manual.
Type in the printer's information and IP address.
Set the DNS Address Configuration as Manual. Under Network Information, it looks like you can change the settings there.
Set the preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4 and confirm the changes.
Try setting it up again.
If you need further assistance, just let me know.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scanning issue with HP LaserJet M1536dnf MFP

I am getting the error messages in my windows 8 machines "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I have a HP LaserJet M1536dnf MFP printer which is connected to the network and users connected to the network through wifi. I have installed the latest driver versions from hp.com. It will work for some time but again will face the same issue. In Windows 7 machines, there are no issues.If anybody is having solution to this problem please share.Thank you.

Welcome to the HP Forums fastndfury,
I see by your post that you are only getting the error on the Windows 8 computer, "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I can help you with this issue.
I have provided a document to go through the steps to see if it will help resolve this issue.
'Another program has control of the scanner' Message Displays on the Computer When Scanning.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet MFP scan issue

Laserjet 1536mfp will not scan after windows 8.1 upgrade. Receive a message which says that scanner communication cannot be established. I have turned off the the firewall and it makes no difference.
It prints fine.
What can I do?
This question was solved.
View Solution.

Hi @glcg123 ,
I see that you are having issues scanning since updating to Windows 8.1. I would like to help you resolve this issue.
Did you uninstall and reinstall the printer software after the update?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
If you are still having issues, uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
How is the printer connected? (USB/Ethernet)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro CM1415fnw color MFP printing & scanning problems

Ever since I purchased this multifunction color printer, it has been unreliable. My Mac Mini running the latest OS (currently Mavericks OX 10.9.2) will be printing and scanning fine, and then at some point it can't find the scanner, the printing slows to an amazing crawl, and then the printing stops altogether. I have repeatedly attempted to set up the printer under Preferences and have installed the latest drivers from the HP website. When that works, it's a short-term fix; eventually, the bugs come back. The darn thing won't scan or print again, and I'm pretty fed up. I paid a premium price for a premium color multifunction printer for my home, and it has been nothing but a problem. Help!

Hello StoopBoy,
Welcome to the HP Support Forums.
I see that you have an HP LaserJet Pro CM1415fnw color MFP being operated on a Mac 10.9.2. The CM1415fnw will not maintain a continual connection to the computer displaying errors and very slow printing. Since you have done a great job already troubleshooting the issue some of the steps I suggest will have already been done by yourself.
I suggest you take these steps to help resolve the issue:
1. Reset the Printing Systems by following this Apple Document: Mac OS X: How to reset the printing system.
2. Uninstall the HP LaserJet Pro CM1415fnw color MFP with this HP document: Uninstall HP printer software.
3. Repair disk permissions on the Mac.
4. Check for and install any and all updates on the Mac.
5. Downlaod and Install the printer HP LaserJet Pro CM1415fnw color MFP software.
I hope this helps and will allow you to have more continual functionality with your Laserjet.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP M1319 MFP laserjet scan issues

Similar Messages

Maybe you are looking for