HP m6-1002tx

Dear sir,
we have purchased HP pavillion m6 model laptop before 2 Yrs. Now suddenly 2 sides (left&right) of Hinge support stem from Bottom are broken .
i think it has to be a Manfacture defective because that stem was not harder than lcd Hinges . so its easily broken while open and close the laptops.
pls put a very strong material(stem from Bottom to LCD hinges) on that area to reduce this type of issue.
we are not happy this product from HP.
WIth regards,
kannan.k

Hello @kannan1979 ,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

Similar Messages

Can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?

can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?
Is their any msata port in my laptop motherboard?
is their any problem by installing msata in my laptop?

Hi,
Please check the following documnet to find down a slot on the system board because this is an option:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03282148/c03282148.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavillion dm4 - 1002tx Entertainment Notebook - Hardware Upgrade

Hi,
Does anyone can help me answers my silly questions regarding above subject. I have just installed a simulation games on my laptop HP PaviIlion dm4 - 1002tx Entertainment Notebook. I have problem on running it and beleive that my laptop system doesnt meet the requirements.
Games Installed Minimum Requirement:
OS : Windows Vista, Windows 7, Windows 8
Processor : 2.66GHz Intel Core2 Duo E6750 or 2.8GHz AMD Athlon 64 X2 5600+
Memory : 2GB RAM
Graphics : 256 MB DirectX 9 / NVIDIA GeForce 8600 GT or ATI RAdeon HD 2600 XT
Hard Drive : 12 GB HD Space
Sound : DirectX 9.0c - compliant
Games Installed Recommended :
OS : Windows Vista, Windows 7, Windows 8
Processor : 3.1GHz Intel Core i3-540 or 3.3GHz Athlon II X3 455
Memory : 4GB RAM
Graphics : 512 MB NVIDIA GT 240 or 512 MB ATI RAdeon HD 5670
Hard Drive : 12 GB HD Space
Sound : DirectX 9.0c - compliant
My HP Pavillion dm4 - 1002tx has 4GB RAM and Intel Core i5 -520M 2.26Ghz.
1- Can I upgrade my Processor to meet the requirements above?
2- What will be the type of upgrade to be done?
3- Is it possible to upgrade my processor from 2.26Ghz Intel Core i5 into Intel® Core™ i5-4690K Processor
(6M Cache, up to 3.90 GHz) ?
Please need badly your help.

No you absolutely cannot upgrade the processor from a first generation Core i5 to a 4th generation. The plug (socket) in the motherboard is not the same. The processor you refer to is not even a laptop processor, but you could not even install an equivalent laptop processor. Your real problem is I believe you have the Intel graphics, which do not meet the minimum specs in any way. You could install a processor that would be in the range necessary to play the game but that is not the whole issue. The fastest procesor you can install would be:
Intel® Core™ i7 processor 640M, 2.80-GHz (SC turbo up to 3.33 GHz), 4-MB L3 cache
You could also install a motherboard with better graphics that are between the minimum and recommended specs.
ATI Mobility Radeon™ HD6370 with 1024-MB of dedicated video memory [128-MB×16 DDR3, 800-MHz])
Whatever game that is has some moderately high recommended specs, but not super high. HP does currently make consumer laptops that would meet those specs. There is just no way to upgrade yours to get the necessary video performance to play it without buying a new processor and motherboard, which will not be much less than a new laptop.

HP Envy 6 1002TX Broken Lid

Got the unit repaired three times already but the problem pops back after a month or so. It's out of warranty now, so will cost about or more than INR15k for repair which I can't afford. I want this laptop fixed, I bought is for INR 58,0000 and this is the situation and HP is helping, I am being asked to pay for the damage that is because of cheap parts being used. I don't wanna pay anything. Now, the lid is broken, keyboard is fried up and the unit cannot take graphics intensive tasks, so it is now good for nothing. fix this laptop or I will be writing about this everywhere. NOTE: I AM NOT SPENDING A DIME ON THIS LAPTOP, I WANT EVERYTHING FIXED AS IT IS YOUR FAULT. Full Story Here:http://wp.me/p5QTxW-1n5 Here is the prev case:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-6-1002TX-Lid-Problem/td-p/4895008

HI @shailendra1993
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How do i decrease the Start-Up time of my HP Pavilion m6-1002tx running on Windows 7 64-Bit?

when i bought it 3 months ago it used to start-up fast
but now it takes almost the triple time to start-up
also file transfer is slow and background apps take time to load on start-up
i use Quick-Heal Antivirus
Disk-Cleanup is done once in a fortnight
please help

Hi,
Try the following.
Start the notebook and let Windows fully load. Hold down the Windows key and press R. In to the Run box type msconfig and hit enter. In the following window, click the Start up tab, remove the tick next to each start up item and then click Apply to make the change.
Restart the notebook.
If there is no diiference in the time Windows takes to load, just re-enable all start-up items adn let me know.
If the notebook does now start faster, re-enable One start up item at a time, click Apply and restart to check if it still starts ok. Keep doing this until you encounter the slowdown problem and you will know the last program you set to start is causing this issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Configuring 32GB SSD while installing new clean OS in hp envy 4-1002tx

My original HDD drive was broken. Now I have original Windows 8 Pro install disk and new HDD 500GB drive. Original SDD 32GB drive is good. Is any way to install Windows 8 Pro to this two disk together like in one disk (SDD will be for hibernating and accelerate system operations) ? Maybe I must install Windows 8 Pro only to standard HDD drive (500GB) and later after install Intel Rapid Technology (special drivers and technology) I must create RAID disk connecting existing HDD disk with SDD disk for best performance ?
Also I dont know how to create RAID disks..as in my bios I cant see INTEL OPTION ROM for creating RAID Volumes.
Someone please help.

Hi @cruiser91 ,
These are recoverable downloads located at the Driver page. I would install all at the driver-Chipset.
A RAID array appears to the operating system to be a single logical drive, regardless of how many individual drives are part of the RAID array. Both hard disks can be used, and while it’s advised that matching drives are used in a single array for best performance.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Sound quality is not as it used to be! after installing windows 8.1

i have a hp envy 6-1002tx laptop which came with windows7 HB but i upgraded to windows 8.1 recently.
since then the sound qualtiy is not the same as it used to be.. it's not loud any more. i have to keep the voulme at 100 to listen. while back when i was using windows 7, even on 60, it was loud enough to be aublible.
i have installed the sound driver recommended by the HP site for my laptop.
there is no support for windows 8.1 from HP.

I completely agree!
Not only that but if you look at the date of the audio driver, it was released almost a year before W8.1 came out!
So, how can it be for W8.1?
Just for kicks, try this driver from a very new model with the IDT audio...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

Bluetooth device unplugged

hi , am using hp envy 1002tx . i formatted my lappy few days ago. now when am trying to install the driver for my bluetooth , the installation process dont get completed and in the end an error message comes up saying that the bluetooth device has been unplugged , please insert/reinsert. how to solve this issue?i have tried of installing new version of the driver from hp website but nothing is working.. help me

Hello @debarpan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook computer is indicating that the Bluetooth device is unplugged after recovering your notebook computer, and I would be happy to assist you in this matter!
The first step I recommend is to restore the original software and hardware drivers that were installed on your computer. To do this, please follow this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). The second step I suggest is to update these drivers by Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Issues regarding connecting the bluetooth headset

hi...i m Envy 6 1002TX user....m unable to connect my Byte stereo bluetooth headset....dont know wats d problem m facing...pls help me out...

Hi
Please find the link given below might help you to fix your issue.
Fixing Bluetooth Headphones
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Cannot sign in with fingerprint in windows 8.1

Hi all,
I have a HP pavilion m6-1002tx. It came with windows 7. I recently upgraded to windows 8.1 pro.
I downloaded the drivers for it from my product's page. There is no Simplepass in windows 8.1 section.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=in&dlc=en&sw_lang=&product=5269...
Now I am not able to use my fingerprint reader to sign in with simplepass . It used to work fine with windows 8 and 7.
But while signing in to windows biometrics I get this strange message "An error occurred while processing your fingerprint".
I have no idea of what to do next.
The details of my fingerprint drivers are:
Validity Sensors (WBF) (PID=0018)
Driver Version: 4.4.234.0
Status:
0180200A
DN_DRIVER_LOADED
DN_STARTED
DN_DISABLEABLE
DN_NT_ENUMERATOR
DN_NT_DRIVER
Hardware IDs:
USB\VID_138A&PID_0018&REV_0078
USB\VID_138A&PID_0018
PLEAZZZZ HELP.......If any one of you have got any clue.
Its painful to type the whole password everytime while having necessary hardware that does the job.

Hello If you are recieving this message before Windows loada up then goto BIOS and clear the fingerprint data.
The driver for WIndows 8 will work fine with Windows 8.1.
ALSO
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Overcllocking Processor of An Ultrabook/Sleekbook

I have HP Envy 6 1002TX Sleekbook or Ultrabook i don't know.
what's the point of having this laptop if it doesn't even provide adequete power, idon't think 1.70GHZ isof any use.
tell me exactly what's the point of having a dedicated VRAM of 2GB with this CPU if this can't even fullfill the min requement for most of the games?
So, at last i would like to ask if i can overclock this computer or must get it replaced by any other computer:-
What an Ultrabook Promises                             What this Laptop is giving
1.Faster Boot time                                                1.Boots in more than 40 seconds even slower than my core2duo PC.
2.Fast Response                                                  2.Very bad response can't even run Photoshop,Eclipse IDE,Firefox
                                                                                     and Adobe Reader Simultanuosly.Which is very easy for my core2duo.
3.Good Graphics                                                   3.Can't even run games smoothly.
4.10 hours of battery                                             4.i have not seen it work more than 3 hours in power saver mode with min
                                                                                     brightness
the only unique thing about this latop is it's look, it can't even match my 4 years old core2duo desktop with just 3GB ram (INR 24,000) I never expected this from HP......
This question was solved.
View Solution.

Processor:
3rd Generation Intel Core i5 – 3317U
Chipset:
Intel HM77
Memory:
4 GB DDR3
Memory Upgradeable:
Up to 16 GB
Hard Disk:
500 GB SATA 5400rpm
Operating System:
Windows 7 Home Basic
Optical Drive:
Nil
Screen:
15.6 Inch LED Backlit Widescreen
Resolution:
1366 x 768 Pixel
Graphic Processor:
2GB ATI RADEON 7670M
Web Camera :
HP TrueVision Low Light HD Webcam
Pointer Device:
TouchPad with Multitouch Gesture Support
Keyboard:
Dura-coat Island-style Keyboard
Audio:
Beats Audio High Definition Speakers / Dual Speakers with Internal Sub-woofer
Connectivity:
Ethernet - Integrated 10/100/1000, Wireless LAN - IEEE 802.11 b/g/n, Bluetooth - v4.0 + HS
Ports/Slots:
2 x USB 3.0, 1 x USB 2.0, Mic In, RJ45 LAN, HDMI Port, VGA Port, Multi Card Slot - 4-in-1 Media Reader
Battery:
4 Cell / Up to 8 hours Battery Backup
Weight:
2.03 Kg
above are your configuration right?
you can easily run alan wake,batman arkham city ,battlefield 3,crysis,mass effect 3 with high settings dude what is the exact problem you have?its a great laptop ,if you are facing issues then reinstall your windows and drivers and setup everything again ...my suggestion would be try to keep your laptop connected to direct ac power while gaming for better performance,the laptop i have has the same problem it doesnt allow me to play games with good fps on battery even if i put the power settings on high performance ..but when i connect it to direct ac power i get good results with better frame rates ...so dont panic reinstall everything ,if you are facing those issues again then get your laptop checked to your nearest hp centre ..
click kudos if you like my answer
regards
pacificb0y

Recovery Methods

System Specs:-
Model: Envy 6 1002TX
Product No: B4P24PA#ACJ
OS: Windows 7 x64 Home Basic
RAM:4GB
HDD: 500GB
Problem:
Recovery partition lost and recovery discs got from retailer is corrupt.
Want to upgrade to win8 but in case there is some problem and i have to revert back to win7 can i do the following thing?
create a system image of windows 7
and then upgrade to 8 and if any problem is found can i revert back to win7 using this technique, internet says yes but i am not sure for this system so can you please tell me?
i am asking this because this system doesn't let install any other OS than that comes with the PC even the original windows basic x64 didn;t install on this system.

Hi:
If you can read the W7 Basic product key on the bottom of your PC, you can make your own W7 Basic installation DVD.
Below is the link to the instructions for doing so.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3827.2-1-4-deleting-the-ei-cf...

Lapop upgrade

what things can be upgraded in
HP ENVY 6-1002tx Notebook PC ...RAM,hard disk.....

RAM and hard drive; not the CPU. The CPU is soldered to the motherboard. It can take up to 16 gigs of RAM. Keep in mind the Sleekbook is very tightly constructed since it is so skinny and it is much harder to work on than an average laptop.
Here is the Service Manual:
Manual
It uses a hard drive system where there is a regular mechanical SATA 2.5 inch wide and 7mm thin hard drive plus a small mSSD hard drive which acts to speed up the mechanical drive. This system works well but is not as fast as a single solid state hard drive. You can replace the mechanical drive with a solid state drive and either remove the mSSD drive or put it to work as a regular storage drive with a drive letter or theoretically you could get a bigger mSSD and use that as the main drive, just not in conjunction with a regular hard drive. You need to have a degree in computer engineering however, to get the mSSD working as the boot drive.
Even upgrading the memory is a bit of an ordeal. These laptops are not made to be worked on by end users, but it can be done.
If you need more help post back for specific recommendations.
If this is "the Answer" please click "Accept as Solution" to help others find it.

3725 + CME + SIP Provider = Frustration

I am a telecom tech trying to learn about more about the Cisco world. I have been trying to get CME registered to a SIP provider (Broadvoice) for a few weeks now with no luck. Can anyone look at this and let me know if there are any blatent problems? I am including some of a DEBUG MESSAGES below as well.
*************************************3725 CONFIG****************************************************
! Last configuration change at 18:05:07 cst Thu Feb 28 2002
! NVRAM config last updated at 18:06:54 cst Thu Feb 28 2002
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname CME3725
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 5
clock timezone cst -6
ip cef
ip host sip.broadvoice.com 147.135.8.128
ip host proxy.nyc.broadvoice.com 147.135.20.221
multilink bundle-name authenticated
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
h323
call service stop
sip
bind control source-interface FastEthernet0/0
bind media source-interface FastEthernet0/0
registrar server expires max 3600 min 3600
   localhost dns:sip.broadvoice.com
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice register global
mode cme
source-address 192.168.1.201 port 5060
max-dn 2
max-pool 1
authenticate register
tftp-path flash:
create profile sync 0011343535014052
voice register dn 1
number 21443XXXXX
allow watch
name cisco
shared-line
label 1005
mwi
voice register pool 1
id mac 0000.0000.0000
number 1 dn 1
dtmf-relay rtp-nte
username 1005 password 1005
codec g711alaw
voice source-group SIP-Trunks
access-list 50
voice source-group SIP_Trunks
voice translation-rule 1
rule 1 /^.*/ /21443XXXXX/
voice translation-rule 2
rule 1 /21443XXXXX/ /1005/
voice translation-rule 3
rule 1 /^214(.*)/ /\1/
rule 2 /$..........$/ /1\1/
voice translation-profile Broadvoice_IN
translate calling 3
translate called 2
voice translation-profile Broadvoice_OUT
translate calling 1
username cisco privilege 15 secret 5 $1$MB2M$RtpE/ooDpcXUIfij1GCJ0.
username 1005 password 0 1005
archive
log config
hidekeys
interface FastEthernet0/0
ip address 192.168.1.201 255.255.255.0
speed auto
half-duplex
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.254
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
control-plane
dial-peer voice 1 voip
description ** Outgoing Broadvoice 10-digit **
translation-profile outgoing Bradvoice_OUT
preference 2
destination-pattern 1..........
voice-class codec 1
session protocol sipv2
session target ipv4:147.135.20.221
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 43XXXXX voip
description ** Incoming Broadvoice **
translation-profile incoming Broadvoice_IN
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number 21443XXXXX
dtmf-relay rtp-nte
codec g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 86 voip
description ** Outgoing Broadvoice Voice-Mail **
destination-pattern *86
voice-class codec 1
session protocol sipv2
session target ipv4:147.135.20.221
dtmf-relay rtp-nte
ip qos dscp cs5 media
no vad
sip-ua
authentication username 21443XXXXX password 7 143F21XXXXXXXXXXXXXXXXX realm BroadWorks
no remote-party-id
retry register 3
retry options 1
timers connect 100
mwi-server ipv4:147.135.20.221 expires 3600 port 5060 transport udp unsolicited
registrar ipv4:147.135.20.221 expires 3600
sip-server ipv4:147.135.20.221
host-registrar
telephony-service
load 7921 CP7921G-1.0.1/CP7921G-1.0.1.
max-ephones 5
max-dn 5
ip source-address 192.168.1.201 port 2000
max-conferences 4 gain -6
dn-webedit
transfer-system full-consult
ephone-dn 1
number 1003 no-reg primary
name The Fishers
ephone-dn 2
number 1002 no-reg primary
name Other Phones
ephone 1
device-security-mode none
mac-address 0023.5E67.74EA
type 7921
button 1:1
ephone 2
device-security-mode none
mac-address 0023.5E67.758C
type 7921
button 1:2
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
ntp clock-period 17180118
ntp master
ntp server 129.6.15.28
end
********************************************DEBUG****************************************************
Aug 8 01:34:16.316: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.200:41812;branch=z9hG4bK-d87543-06266a34ed272f5b-1--d87543-;rport
Max-Forwards: 70
Contact: <sip:[email protected]:41812>
To: "92145XXXXXX"<sip:[email protected]>
From: "MY NAME HERE"<sip:[email protected]>;tag=5f37a274
Call-ID: 6220fa11bb1c6c46ODhkYmEwYzRlMmFmNzY0NDdkZjQzZDFlMzEzMzFhM2Q.
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
Content-Type: application/sdp
User-Agent: X-Lite release 1002tx stamp 29712
Content-Length: 485
v=0
o=- 5 2 IN IP4 192.168.1.200
s=<CounterPath eyeBeam 1.5>
c=IN IP4 192.168.1.200
t=0 0
m=audio 26344 RTP/AVP 107 119 0 98 8 3 101
a=alt:1 3 : orcMzWYQ jqWa9BMB 192.168.1.200 26344
a=alt:2 2 : S9KWsCq2 awpCGnJ0 192.168.1.76 26344
a=alt:3 1 : rMS6WAXp CvmP73Zj 192.168.1.100 26344
a=fmtp:101 0-15
a=rtpmap:107 BV32/16000
a=rtpmap:119 BV32-FEC/16000
a=rtpmap:98 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=sendrecv
a=x-rtp-session-id:A8F366E8CB8B472F8215DFD332367F73
Aug 8 01:34:16.444: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.200:41812;branch=z9hG4bK-d87543-06266a34ed272f5b-1--d87543-;rport
From: "MY NAME HERE"<sip:[email protected]>;tag=5f37a274
To: "92145XXXXXX"<sip:[email protected]>
Date: Sun, 08 Aug 2010 01:34:16 GMT
Call-ID: 6220fa11bb1c6c46ODhkYmEwYzRlMmFmNzY0NDdkZjQzZDFlMzEzMzFhM2Q.
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 INVITE
Allow-Events: telephone-event
Content-Length: 0
Aug 8 01:34:16.592: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.201:5060;branch=z9hG4bK1A91C
From: "MY NAME HERE" <sip:[email protected]>;tag=2E67CC-894
To: <sip:[email protected]>
Date: Sun, 08 Aug 2010 01:34:16 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3828225533-2713915871-2151408495-2897475455
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1281231256
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 250
v=0
o=CiscoSystemsSIP-GW-UserAgent 3473 6602 IN IP4 192.168.1.201
s=SIP Call
c=IN IP4 192.168.1.201
t=0 0
m=audio 16398 RTP/AVP 8 101
c=IN IP4 192.168.1.201
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Aug 8 01:34:16.752: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Call-ID: [email protected]
CSeq: 101 INVITE
From: "MY NAME HERE" <sip:[email protected]>;tag=2E67CC-894
To: <sip:[email protected]>
Via: SIP/2.0/UDP 192.168.1.201:5060;branch=z9hG4bK1A91C
Content-Length:    0
Aug 8 01:34:16.792: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 403 Forbidden
Call-ID: [email protected]
CSeq: 101 INVITE
From: "MY NAME HERE" <sip:[email protected]>;tag=2E67CC-894
To: <sip:[email protected]>;tag=vwxy
Via: SIP/2.0/UDP 192.168.1.201:5060;branch=z9hG4bK1A91C
Allow-Events: telephone-event
User-Agent: Cisco-SIPGateway/IOS-12.x
Content-Length: 187
Content-Type: application/sdp
v=0
o=1664745546 3473 6602 IN IP4 99.53.0.78
s=-
c=IN IP4 99.53.0.78
t=0 0
m=audio 16398 RTP/AVP 8 101
c=IN IP4 99.53.0.78
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
Aug 8 01:34:16.900: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.201:5060;branch=z9hG4bK1A91C
From: "MY NAME HERE" <sip:[email protected]>;tag=2E67CC-894
To: <sip:[email protected]>;tag=vwxy
Date: Sun, 08 Aug 2010 01:34:16 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Aug 8 01:34:16.912: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 192.168.1.200:41812;branch=z9hG4bK-d87543-06266a34ed272f5b-1--d87543-;rport
From: "MY NAME HERE"<sip:[email protected]>;tag=5f37a274
To: "92145XXXXXX"<sip:[email protected]>;tag=2E6920-1C05
Date: Sun, 08 Aug 2010 01:34:16 GMT
Call-ID: 6220fa11bb1c6c46ODhkYmEwYzRlMmFmNzY0NDdkZjQzZDFlMzEzMzFhM2Q.
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 INVITE
Allow-Events: telephone-event
Reason: Q.850;cause=57
Content-Length: 0
Aug 8 01:34:16.984: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.200:41812;branch=z9hG4bK-d87543-06266a34ed272f5b-1--d87543-;rport
To: "92145XXXXXX"<sip:[email protected]>;tag=2E6920-1C05
From: "MY NAME HERE"<sip:[email protected]>;tag=5f37a274
Call-ID: 6220fa11bb1c6c46ODhkYmEwYzRlMmFmNzY0NDdkZjQzZDFlMzEzMzFhM2Q.
CSeq: 1 ACK
Content-Length: 0
************************************SIP REG STATUS************************************************
CME3725#SHO SIP REG STATUS
Line          peer           expires(sec) registered
============ ============= ============ ===========
CME3725#

Two things appear to be occurring:
a) You don't have a registration with your provider. Maybe they don't require that. But if they do, no numbers are trying to be registered.
b) The inbound call is not matching an internal extension, and as a result is matching a pattern and routing back out to your ITSP.
You can take care of both of these with:
ephone-dn 1
number 1003 secondary no-reg primary
name The Fishers
Now, make a call to that number you used for the secondary number. Assuming a phone is assigned to DN 1 and registered, it will ring that phone.
-Steve

Battery - difference in last letters of laptop model (is it important?)

Hello Forum!
I want to buy a new battery for my HP Pavilion dv5 1032eg. I already found a battery which I can buy but there is a difference in the last two letters (in my case I need "eg"). What do they stand for? Do I have to consider them when buying a new battery?
Below you can see the two types of the Pavilion 1000 series which are listed on the site. They are the same model as mine but only have different letters at the end; el and tx.
Thank you very much!
HP Pavilion DV5-1000 Product Series
dv5-1000 / dv5-1000e / dv5-1000eg / dv5-1000ea / dv5-1000us / dv5-1001au / dv5-1001ax / dv5-1001tu / dv5-1001tx / dv5-1002au / dv5-1002ax / dv5-1002nr / dv5-1002tx / dv5-1002us / dv5-1003ax / dv5-1003cl / dv5-1003nr / dv5-1003tx / dv5-1004ax / dv5-1004nr / dv5-1004tx / dv5-1005ax / dv5-1005ef / dv5-1005eg / dv5-1005em / dv5-1005tx / dv5-1006ax / dv5-1006tx / dv5-1007ax / dv5-1007ca / dv5-1007cl / dv5-1007ef / dv5-1007tx / dv5-1008ax / dv5-1008ca / dv5-1008ea / dv5-1008tx / dv5-1009ax / dv5-1009ea / dv5-1009tx / dv5-1010ea / dv5-1010ef / dv5-1010eg / dv5-1010et / dv5-1010tx / dv5-1010us / dv5-1011ea / dv5-1011tx / dv5-1012ea / dv5-1012tx / dv5-1013tx / dv5-1014tx / dv5-1015ea / dv5-1015nr / dv5-1015tx / dv5-1016tx / dv5-1017nr / dv5-1017tx / dv5-1018tx / dv5-1019tx / dv5-1020ef / dv5-1020el / dv5-1020et / dv5-1020tx / dv5-1021tx / dv5-1022el / dv5-1022tx / dv5-1023tx / dv5-1024el / dv5-1024tx / dv5-1025tx / dv5-1026tx / dv5-1027tx / dv5-1028ca / dv5-1028tx / dv5-1029tx / dv5-1030ef / dv5-1030el / dv5-1030ep / dv5-1030es / dv5-1030tx / dv5-1031tx / dv5-1032el / dv5-1032tx / dv5-1033tx / dv5-1034ca / dv5-1034el / dv5-1034tx / dv5-1035tx / dv5-1036tx / dv5-1037tx / dv5-1038tx / dv5-1039tx / dv5-1040ec / dv5-1040ee / dv5-1040eg / dv5-1040eh / dv5-1040ep / dv5-1040er / dv5-1040et / dv5-1040ew / dv5-1040ez / dv5-1040tx / dv5-1041tx / dv5-1042tx / dv5-1043tx / dv5-1044ca / dv5-1044tx / dv5-1045tx / dv5-1046tx / dv5-1048er / dv5-1050ei / dv5-1050ek / dv5-1050er / dv5-1050es / dv5-1060ec / dv5-1060ee / dv5-1060ew / dv5-1070ec / dv5-1070ee / dv5-1070er / dv5-1070es / dv5-1070ew / dv5-1080eh / dv5-1080ei / dv5-1080el / dv5-1087eo / dv5-1090es / dv5-1093xx / dv5-1094eo / dv5-1094xx / dv5-1095eo / dv5-1096xx / dv5-1098xx / dv5-1099xx

No it should not make any difference.. however if you provide me the product number (p/n) of your NB pasted on the bottom....then i can suggest you the exact battery to purchase....
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

HP m6-1002tx

Similar Messages

Maybe you are looking for