HP Mediasmart Home Server/ MacBook Pro 2011
Hi there,
I've recently upgraded to a 2011 Macbook pro and noticed that the Mediasmart connector software that facilitated backups of my old MacBook Pro via time machine to my HP Mediasmart Home Server (which runs Windows Home Server) no longer works. I believe this is because the 2011 Macbook pros are set to boot into the 64bit Kernel of Snow Leopard (and the HP kext is 32 bit).
I don't want to have to replace the mediasmart - I've owned it for years and its done a good job in backing up both windows PCs and Macs and serving up media to various devices. Also, I don't want to have to run the Macbook Pro in 32 bit mode - does anyone have any suggestions here?
Thanks
Same situation with our new 13" 2011. You really have only 2 options:
#1) Switch to 32 bit kernel. This should have very little impact on you.
#2) Switch to a different time machine solution, such as time capsule.
I don't see HP updating their driver anytime soon, as they are now out of the HomeServer business. You should be prepared for the strong possibility that when Lion comes out, that even the 32 bit kext kernel extension from HP may no longer work. in which case Time Machine may be permanently broken on the Mediasmart servers.
So, you may want to do #1 (which you can always go back to 64 bit kernel), while waiting to see if Lion does indeed break the time machine functionality with the Mediasmart server. If it does, then you only have #2 open to you.
Similar Messages
-
Macbook Pro 2011 - Apple It's time
Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Cannot enter Root User / OS X Lion 10.7 / MacBook Pro (2011)
Hi all,
Pulling my hair out here; if any one can help I'll buy them a Corona or two.
Trying to enter Root User (in order to change the short username and home folder). Here's how it goes:
- New MacBook Pro (2011) / Lion installed
- Brother decided to play with it before I got home, set up a username etc
- I connected my iMac and MBP via an ethernet cable and Account Migrated all my stuff over to the MBP
- I deleted the account my brother setup for me
- Realised the 'Home' folder and short username was still that of my iMac (Joss iMac etc). Wanting to be factually correct looked into changing this via Root User
- Turned on Root User via Apple recommended way (Directory Utilities)
- Enter password
- Logged off as 'Joss iMac'
- Tried to logon as 'root', fails every time. All I get is the shake of the password box like the password is wrong.
I've tried pretty much all of the obvious sugeestions (i.e. renaming password, turning RU off and on again, reboot etc).
If any one can help, like I said, Corona's all round.
Thanks again,
JTgo to Systemsettings, Users & Groups and change "Show list of Users" to "Name and Password Box".
Root is not shown by default.
And if else fails you can boot into single user mode // do it via Unix terminal on the command line. -
MacBook Pro 2011 Djing App
Is there a DJing App for Macbook pro 2011 15" 2.2Ghz?
check out Virtual DJ Home and Mixx. both free in the app store. They are more complex than DJay
-
Macbook Pro 2011 not printing on network with canon pixma iP4500
Hi
I am not able to print satisfactorily from my 15" MacBook Pro 2011 to my QNAP TS439 server that has my Pixma iP4500 installed. I contacted apple support and after 45 minutes the operative gave up and said it was a QNAP problem. I am fairly sure it is not, so please read on...
Here is what happens. I ( myself and Apple) select the correct printer from the menu on my MacBook Pro with the correct path and printer on the server using Snow Leopard 10.6.8. As soon as I go to print something it says it is waiting for 10 seconds, very quickly it gets extended out past 30 seconds, but never prints.
I have tried another driver called the Canon Pixma iP4500 Gutenprint v 5.2.3. This will only print in black text. If I try to print colours, I get a very wishy washy pastel effect that just about shows that there might be some colours there. This is hopeless and most unsatisfactory.
In my opinion, this points the finger at Canon's printer driver that has been supplied to Apple, because the printer driver for Windows 7 works perfectly from the Windows 7 x64 PC.
Does anyone have a solution to this?Just a quick reply for others in case it helps....
First you have to install the Canon drivers for Yosemite from Canon Printer Drivers v3.1 for OS X.
Then since I had reset my Canon MP620 network settings, I had to start from scratch. I connected the printer to my new computer (with Yosemite) via USB and then launched the Canon IJ Network Tool.app (downloaded from the Canon web site) and it found the printer. However it hung on the last step "Searching for printers via access point...". At that point (after waiting a minute for it to give up), I had to read the IP from the Canon printer and enter it by hand in the Network Tool dialog.
I then unplugged the USB cable, and went to the Printers and Scanners system preference panel. After a few minutes, the printer showed up and I was able to set it up.
I then tried to set up the printer on a 2nd computer, running Mavericks. The Canon printer would not show up in the Printers and Scanners system preference panel, but after I launched Canon IJ Network Tool.app on that computer, the printer did show up and I could set it up there as well. This is all much more convenient than using a USB cable and sharing the printer, but, dang, is it complicated! -
Macbook Pro 2011 clamshell mode broken by latest software update?
After installing the latest MacBook Pro software update and EFI update through Software Update in the evening May 4, I am unable to enter clamshell mode any more. It used to work before. After waking up in the clamshell mode, the machine promptly goes back to sleep. On subsequent attempts to wake up the system, the laptop itself appears to wake up (at least the sleep light stops blinking) but the display does not even wake up. I can still work with external dsisplay with the lid open but this is highly annoying. I have reset the PRAM with no effect. The machine is a 2011 MBP, 15" inch, 2.2 GHz quad i7. Keyboard and mouse are wireless Microsoft desktop but the problem is also present with wired peripherals.
Does anyone else see this problem after installing the latest patch?Okay, I'll add my frustration here as well.
I've had this problem too, and more noticable since the 1.4 update.
I posted a thread similar to this here.
But I'll just copy over what my main problem was...
Whenever I plug my computer into my Cinema Display (with the computer closed) it won't wake up fully. The status light will come on, any external hard drives will spin up, but the display won't turn on and the computer will go back to sleep.
I have to restart the computer manually to get it to work normally, and if I disconnect it while it's between the sleep and wake mode and try to open it, the backlight will come on but the screen will remain black, causing me to have to force restart it.
This is in addition to my first problem with the backlit keyboard not coming on automatically after sleep, which was temporarily fixed by resetting the SMC, but it goes back to the problem after a week or so.
What could be causing either of these problems? Could it have something to do with BootCamp since I have it installed, or is there a defect?
I would bring it back to Apple, but there's a small dent in the front right corner, and I'm afraid they would deny any problem I have.
I took my MacBook Pro (2011, i7 2.2, 17") into the Apple Store on Monday, and after about an hour of attempting to replicate the problem with a different monitor, there was only one time where there was any sort of problem.
The employee told me to see if there will be a fix, or otherwise they will replace the logic board for me.
One thing I'd like to add as a note...
It seems that the problem is more prominent when I have my computer with everything on it as usual. As in, before I took it to the Apple Store I performed a clean install of OS X, and that may be related to how bad the problem is, any opinions?
I had attempted at reinstalling OS X from a Time Machine Backup, but the problems continued shortly after completetion. In addition to this, I clean installed OS X, and manually reloaded my applications and media, hoping that the problem had stemmed from some kind of broken file system that could be repaired by a new install.
But no matter how I do it, the problem comes back despite the method. It is really something I want fixed, as I pretty much only use it in clamshell mode when home... -
I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!
Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen. -
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above -
Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?
So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6156
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6393
Health Information:
Cycle Count: 343
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1607
Voltage (mV): 12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Does anyone have any idea what the problem may be?
Thank you,
macstrtry doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out.. -
I have and Macbook pro 2011 february. I have installed Lion with the lastest update. I would like to use my thunderbold display as my primary display. The same way when I close my MB Pro 2011, but I wish to use my Macbook pro display as my secondary display.
thanksIf your Mac has got Mini DisplayPort, purchase a Mini DisplayPort to HDMI adapter and a HDMI cable. You won't have to change any setting, and image will show on your TV after connecting it to your MacBook Pro. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US
-
Macbook Pro 2011 running very slowly after upgrading to Mavericks
I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
Dropbox
Internet Plug-ins:
LogMeInSafari64: Version: 1.0.730 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.730 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 3rd-Party support link
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SuperDuper!: Version: 2.7.1 - SDK 10.4 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
7% Safari
6% Dropbox
5% WindowServer
3% hidd
2% com.apple.WebKit.Networking
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
106 MB Safari
94 MB Finder
94 MB Dropbox
94 MB Mail
Virtual Memory Information:
1.26 GB Free RAM
1.44 GB Active RAM
311 MB Inactive RAM
1014 MB Wired RAM
251 MB Page-ins
0 B Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
How to reformat a Macbook pro 2011 hard drive?
Hello,
How do you reformat a MacBook Pro (OS X 10.7.3) 2011s Hard drive? I already backed up all the files I wanted to save. But since I have the new Macbook pro 2011 (only a few months since I got it) it didn't come with an installation disc, but instead already came with all the applications. I'm wondering how to reformat the hard drive so it wipes out everything and I can start fresh and what would happen to all the applications?Well Lion has a Lion Recovery Partition on the drive you can access by holding command r and booting, there you can erase the Lion OS X partition completely (all files and programs) and reinstall Lion or simply reinstall Lion if there is a issue with it (no programs or files are touched in this second procedure)
Lion is downloaded from apple's servers, you need AppleID and a fast reliable internet connection with no bandwidth caps limiting you.
https://support.apple.com/kb/HT4718
If you want to replace the drive, there is software called Carbon Copy Cloner than can clone both the Lion OS X Partition and the Lion Recovery Partition to a external drive intact (excpet what's in the Trash, no Filevualt, no bootcamp, use free Winclone for that)
Hold the option key and you can boot from the external drive and format and clone everything to the new internal drive. TimeMachine of 10.7.2 and later can be booted from it's Lion Recovery Parttion as well just to restore only, cloning is better process because it gives full access to everything like before on the internal drive.
http://www.bombich.com/index.html
Some newer Mac's have Lion Internet recovery built in where the firmware will install the Lion Recovery/OS back onto a completely blank/new hard drive. -
Windows xp on macbook pro 2011 paralles on the monitor does not work
windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanksPost in your native language. There are excellent translators.
-
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599
Maybe you are looking for
-
Can not re-size and move on screen keyboard on windows motion tablet
I have some Tablets (Motion F5) they all have windows 7 pro installed. After a few windows updates last week the on screen keyboard (standard integrated) i cant customize the size anymore. also i cant move it to where i want on the screen. in the set
-
Is photoshop elements 10 compatable with windows 8??
new computer and trying to install my photoshop elements 10 on windows 8 system but the computer is not recognizing the cd at all ?
-
Links do not work in Browser Lab
I'm a Website Designer in Springfield Mo. I am trying to test my website: oursmartweb.com and I cannot click on the links within Browser Lab (when testing pages and websites). It shows the mouse pointer turning into a hand (as if it's a link) but it'
-
Objective setting appraisals in ESS
Hi All, This is a question related to Objective seting appraisal. The requirement is, the apprisal form's criteria group & criteria are different for all employees. So the client needs that a blank form should be available in ESS only with heading &
-
Broken 17.0" WXGA+ BrightView Widescreen
I purchased a HP Pavilion dv8000z notebook in 2006 (with a 160 GB 5400 RPM Dual Hard Drive). The computer itself is in fine condition, however, the screen broke recently and cannot be fixed. What is my best option? It seems if I were to purchase