Hp Mini 1000

Please Help,I cannot shut down my Hp Mini 1000
Everytimes i shut down from windows,it turn on again
i tried to format/reinstall windows.still the same problem
Please Help.....!!!!!!!!!!!!!!!!ASAP

Please hit enter 3 times or enter incorrect password 3 times and reply to this post with the error/halt code
Regards,
KNRK
I work for HP

Similar Messages

HP Mini 1000 - Solid State HD Constantly Thrashing - Slowing System Down

I recently bought an HP Mini 1000 (the actual model number is the 1100 CTO). It came with the HP flavor of Linux. I put the Windows 7 RC on it, as several others have, and noticed incredibly poor performance with the 32GB solid state hard disk.
The symptoms are whenever the disk starts to write, the system is completely unresponsive. I cannot scroll down on browser windows, I cannot launch new processes, I cannot switch tabs, keyboard input is not recognized (until the hard disk stops writing). This happens way too frequently, pretty much any time I load a web browser page or do anything on the system. The hard drive thrashes about 80% of the time that I'm using it.
I have the upgraded 2GB of memory, so I'm not sure why there are so many disk writes going on. I am also not sure why disk writes are taking so long to complete... I thought disk speed was supposed to be faster on a solid-state drive.
I've done numerous things to improve performance: ensuring superfetch and all indexing operations are disabled, turned off the page file, etc. However I still cannot get the system to perform to a point where it is usable, and am seriously considering sending it back and having the regular disk put in it.
Is there anything I can do?

XP Home SP3 (32-bit). Machine is still basically a fresh install, essentially as shipped, with Windows and Norton patches. Swap file is off since it seems like a bad idea for SSD-based systems in general. I also eased some of the graphics settings (like displaying window contents when moving windows) since that's more eye candy than necessary.
HP's tech suggested checking for bad blocks. Doesn't seem to have helped. My intention in getting the machine was to configure a dual-boot with a yet-to-be-determined linux distro (I'm running Ubuntu 9.04 on the dying P3 laptop I'm using to write this -- so, yes, I'm finding a 2001 vintage consumer-grade laptop preferable to our new Mini 1000s...).
Performance may actually improve after being on for 30 minutes to an hour. Perhaps Windows has begun to cache things in RAM as it should. That doesn't really work for a netbook, though, since the whole point is availability when you need it.
I wonder if these SSDs have the notorious jmicron controller. I'm not sure how to check. Supposedly if you have XP professional or embedded you can use a module called Enhanced Write Filtering (EWF) as a sort of buffer. It isn't shown in the Windows XP Home help menu, though, so it might not be included.

HP Mini 1000 Netbook Lost / Forgotten Bios Password

I have inherited an HP Mini 1000. I would very much like to access it to get my lost one's files. The battery looks a bit swollen, but it doesn't look like it's has hard use. It is XP.
The Bios, not the WIndows login screen comes up and asks for the password. I have no idea, and can't possibly recover it.
s/n: [Personal Information Removed]
p/n: NM121ua
Product Key: TRBF3-6JCF4-GM42P-6XHK3-HGV36
Could you possibly give me one of those passwords to allow me into Windows? I would greatly appreciate it.
Cheers!
micheleM@=)
This question was solved.
View Solution.

I thank you so much! Cheers! M@=)

Hp mini 1000 bios password reset

Hello, i got a hp mini 1000 from a freind but it is wont open it always ask for password at boot and after three trial it said
Password check failed
Fatal error. . , system halted
2MC84545YP
I hope someone can help me .
regards
This question was solved.
View Solution.

Hi,
After you tap f10 to access the bios menu, enter the code from my first post to gain access to the bios menu - you can then use the method I described to remove the power-on password.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 1000 bios password recovery

I have an HP mini 1000 that a friend gave me. It is asking for a password at the startup before windows kicks in. My friend doesn't remember the password and after 3 failed attemps it has the error code of
[edited Serial Number by Moderator]
How do I get the bios password based on this error code?
Thanks Tremendously!!
This question was solved.
View Solution.

Hi @Dirtythirty30 ,
Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Help.. help.. HP Mini 1000.. reset bios!!! CNU9257483

help.. help.. HP Mini 1000.. reset bios!!![edited Serial Number by Moderator]
Thank all>>>>>
This question was solved.
View Solution.

Ken try.
e9lo7qxvuf
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Could anyone help me with an HP mini 1000 bios password

Can anyone help me with an HP mini 1000 bios password
I did not remember that ever set one but it pop out out of blue.
The S/N is below:
CNU926623M
I'm pretty much sitting ducks here.
Any help will be greatly appreciated.
Thank you very much.
This question was solved.
View Solution.

Hi,
Try the below code
e9lo7gg7f4
Use the unlock code posted above to enter the BIOS
Disable all passwords that are enabled
If asked for current password - type the unlock code
For new password, just press ENTER key
Repeat the same for verify password column.
Then leave the BIOS by saving & exit option to save the changes.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Microphone does not function after installing Windows 7 RC on a HP Mini 1000 (1030NR)

Hi. I recently purchased a HP Mini 1000 (1030NR) and upgraded it to Windows 7 Release Canidate. After install, I added the trackpad drivers, and everything else works fine except for the microphone. The computer recognizes it but when I speak nothing happens. The volume is turned up, and if I turn up the Mic Boost, all I hear is static. I have installed what I think are the correct drivers from another poster, to no avail. Also, there are no errors in the device manager. ANy ideas?
Thank you in advance.

As a tempory measure search for SP40662 this package will enable the mic but there is a catch (isnt there always). The catch is that the mic is going to be recognized as the external one and if you plug in headphones you will have to reboot the mini to use the internal mic again. Im using the same set up right now and it works fairly well. Just hope that HP decides to bestow upon us the proper drivers for the mini soon.

HP mini 1000 Audio Help!

*Sigh* I was so stupid and I acted without thinking.
I have a HP mini 1030nr and as you know, the audio or speakers suck on it. Well I was trying to fix it with a driver fix on this website http://www.ehow.com/how_4817909_audio-problem-hp-mini-notebooks.htm and I was going through the steps and I deleted the "IDT audio" program to dowload the new one more down on that page and the link to the new program or whatever isnt working so now I dont know what to do. I'm thinking about returning the computer to the factory settings but I dont know how to do that and I cant find a program to replace it or the old program.
Thanks for the Help,
Kevin.

Go to HP's download center and download the Mini 1000 sound driver for VISTA...
http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&dlc=en&lc=en&softwareitem=ob-6...
My mini sounded like CRAP (tone was really thin & tinny, no bass). I play guitar here in Vegas (1-man-band, rock, blues, country, smooth jazz) and I bought my mini to play my backup music. When I heard the S**TTY sound I was ready to "return to sender", but THANX TO THE HP FORUM... I found out about downloading the sound driver for vista... now the sound is AMAAAAZING... Quick & Easy... but like the other guy said, create a restore point before you remove the existing IDT sound driver, remove the old one, and install the vista driver. WHY DOESN'T HP INSTALL THIS IN ALL THEIR MINI'S ??? GOOD LUCK...

HP mini 1000 password reset/access

Hi there
I am 1 of many trying to access my Mini 1000 that was handed down to me and I can not get past the password. I followed the threads and tryied every supplied possibilities, but still get the:
"fatal error....system halted. CNU9362TXF"
Can you help me? Thanks in advance.
This question was solved.
View Solution.

Hi,
Enter:     e9lofg7a48      ( Note that in both cases, the 3rd character is a lower case L )
                          or
                 e9lofg7ar8
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 1000 password reset

Hi,
I got an HP Mini 1000 from someone, it asks for a password when I boot it up. The old user doesn't remember the password. After I try three times, I get a message, 'Fatal Error' and error code CNU9102G80
Thanks for the help

Hi,
Please try : e9lo317hu1 (all lowercase - 3rd charactter is the lowercase of L).
Note: CNU9102G80 both red chars are zero's
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Mini 1000 BIOS Password Lost

HiIt seems a friend decided to be funny and setup a password on my netbook, but forgot to write it down somewhere.
It's a HP Mini 1000 and after 3 failed attempts I get the following error:
Password Check Failed
Fatal Error....System Halted
CNU92395KM
What can I do?
Please someone help me!
This question was solved.
View Solution.

488gith wrote:
HiIt seems a friend decided to be funny and setup a password on my netbook, but forgot to write it down somewhere.
It's a HP Mini 1000 and after 3 failed attempts I get the following error:
Password Check Failed
Fatal Error....System Halted
CNU92395KM
What can I do?
Please someone help me!
TRY: e9lo7foqs4
third character is small letter L
fourth & seventh character is small letter O
thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

HP Mini 1000 Bios Password

I bought a used HP Mini 1000. I cannotget passed the password. Code is CNU9135Z9J. Can you help me?
This question was solved.
View Solution.

Hi,
e9lo3fq0ow
Regards,
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Hp mini 1000 bios error code CNU9162V02

my sister gave me a hp mini 1000 but it has a bios password and we do not know what the password is,the bios error code is CNU9162V02 ive searched high and low for a solution, can ANYONE please, if you know the correct code for this error, pllleeease.....help me....thanking you wonderful folks in advance!
This question was solved.
View Solution.

Steve try.
e9lo3g7617
3rd letter lowercase L.
4th letter lowercase O.
9th is number 1.
Use that code to go into the BIOS.
Disable all passwords that are enabled.
If asked for the CURRENT password use that code.
If asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Reset password Bios HP Mini 1000 CNU92652N6

Hepl - Password Reset password Bios HP Mini 1000 - code CNU92652N6 model #:1151NR Thank

As you've posted this issue several times, if the replies you're getting are not working, you need to explain what is not working on the same thread, rather than creating additional ones. From the halt code you've posted: Enter: e9lo7gq79g If the above code isn't working, check the following. 1. The halt code ( generated after 3 incorrect entries ) that you've posted is correct. 2. You entering the code on a QWERTY keyboard. 3. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Plug in the AC Adapter ( leave the battery out for the moment ), start the notebook and try entering the code again. 4. Try entering the code via an external usb QWERTY keyboard. Regards, DP-K

Hp Mini 1000

Similar Messages

Maybe you are looking for