Hp mini 110-1046nr fatal error code bios password

cnu0065bvp
This question was solved.
View Solution.

Hi Don,
Try entering:      e9lofxx4w4       ( Note that in both cases, the 3rd character is a lower case L )
                                        or
                                e9lofxxrwr
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

    HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
    Please  Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year,  plz help me if you can?.
    This question was solved.
    View Solution.

    Hi,
    Good to hear it's Ok
    You can remove the need for a power on password as follows - use the code from my previous post where necessary.
    Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP mini 110-1116NR laptop fatal error code CNU939DV7 askin for password

    Upon startup it asks for current password. When you enter it 3 times wrong it says fatal error code CNU939DV7. Ive tried every password on the help site but none were for the same fatal error code. Please Help!
    This question was solved.
    View Solution.

    Hi,
               Try the below code
    e9lofo1t6x         (3rd letter is L)
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Hp mini laptop fatal error code

    I keep getting fatal error code CNU9277JZ I don't know the password and can't get in it and my mother doesn't remember it.

    Hi,
    Please try (all lower cases):
        e9lo7xxw07 (the 3rd char is lower case of L and 9th char is a zero).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My hp mini 110-4100 F11 error!!

    my hp mini 110-4100 F11 error!!

    Hi zeroking, welcome to the HP Forums. Do you have more details to provide? Do you get that error on startup? Are you able to enter Windows? What operating system is installed?
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Blu-ray Error: fatal error, code 6, audio buffer underflows...

    Ughh.... So its been a few months since I stopped using CS6 Encore because it loves to crash for all kinds of bad reasons. Today I needed to do a new project, and used a simple 1920x1080p MP4 file created by Adobe Media Encoder, and used a basic menu template in Encore. Also added a slideshow timeline with one Mp3 audio set to loop. During the building image part of the build process, I get the fatal error code 6, audio buffer underflows. Total bitrate too high neat time = 0.00000 seconds -
    First off, I set the BR transcode setting to auto and it spends  pleanty of time transcoding the file to a 15mbps bitrate, so why is Encore not first taking care of all the source files correctly in transcoding...?

    Ok.... 100% the fault of the software. I am an SE, and build systems all the time for my business, so if I knew of these simple problems, Id go into the code and devise a solution...please Adobe, fix Encore.
    Here are my simple finding from solving this problem (first post):
    - Of the 2 simple Mp4 files produced by Media Encoder, one, which runs only 2 minutes, had a peak of a little over 10mbps. I dropped the file back into Encoder and set the same mp4 profile to max of 6mbps and then replaced the file in the encore project, ran build and it worked fine.
    SO.... If I can use a simple free bit of software to look at the bitrate of a file (google Bitrate Viewer) and determine that the peak was possibly too high, why oh why cant adobe write a better transoding logic algorythm to decide if a video in a timeline needs to be reprocessed at a slightly lower bitrate before just attempting a build and then throwing an error. For the love of all that is holy, please tweek your transcoding decision process to prevent these simple errors.

  • Please Help Me!  Encore giving error message on Build:  "fatal error", Code: "6", note: "video buffe

    Hello,
    I have been trying to build a project (a 50gb Blu Ray disc) for the last couple of days and I keep getting an error message I have never gotten before.  The error says: "fatal error", Code: "6", note: "vide buffer underflows  Total bitrate is too high near..."
    I don't know why this is happening.  I build this entire project from the ground up once before using the exact same assets but I accidently deleted that project file so I had to put it together again.  But it was practically identical.  And it would build the project just find.  I deleted the cache folder.  I deleted the main video timelines and recreated them.  I made sure the transcode settings for bitrate were not too high.  I did everything I can think of.
    Can someone please help me?  I have no idea what to do now.  The frustrating thing is that the error message doesn't tell me what asset the problem is with or anything.  This is a rather complicated project.  I have two full length movie files (about 90 minutes each) and seven video special features.  I have five audio tracks and a couple of subtitle tracks.  I don't have any idea what asset is causing the problem!
    But I used all these same assets before and I built the project perfectly.  And it is not the subtitles because I deleted the subtitle tracks and I still got the error message.
    Is there any way of knowing what assets are causing the problem?  How can I fix this?
    I have a number of people who are waiting for the completion of this disc so I need to get this resolved pretty soon.
    Thanks.

    The error says: "fatal error", Code: "6", note: "vide buffer underflows  Total bitrate is too high near..."
    What is the rest of the error message?
    What version of Encore and what operating system?
    using the exact same assets
    What format? Already transcoded m4v/a3c 5.1 or what? Does Encore show them for Bluray as "Do Not Transcode"?
    What were the export settings, particularly bitrate?
    Is there any way of knowing what assets are causing the problem?
    Not through the error message.
    Rather than deleting elements to see what causes it, I would add elements (e.g. you got the error, deleted the subtitle tracks, and still had the error, leaving the possibilit that a cache or similar is contining the problem even if the subtitles caused it).
    So add just the menus and timelines, no extra audio, no subtitles,
    When starting a new project, make sure you are using a new name for the project.

  • Blu-ray: "fatal error", Code: "6"; "Note:"

    Blu-ray: "fatal error", Code: "6"; "Note:"
    That's the error I got when Encore CS3 started to actually write to the bluray burner.
    It's worked many other times but this time it did everything except the burn.
    If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
    Real helpful, right?
    Hope there some "real" help here.
    Thanks,
    Steve Garman
    HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

    I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
    Thanks,
    [email protected]

  • CS6 - Blu-ray Error: "Fatal Error", Code: "6"

    Greetings,
    I have gone through about 15 Blu Ray Disks in the past week, trying to burn one wedding project.
    When i burn to DVD - its fine... but when i choose Blu Ray, it gets about 1 hour in and then comes up with 'Blu-ray Error: "Fatal Error", Code: "6".
    I have tried to re-export all files for burning, in two different blu ray formats - but it continues to come up with the same.
    I have used Encore for years but have just upgraded to CS6 and im getting these errors. 
    What am i doing to cause this?
    Thx,
    James

    Try this first:
    Strange Errors in En? Project Changes Not Showing Up? Try This!
    Then type "fatal error code 6" into the "Ask A Question" box at the top of the main Encore Forums page, or the top of the Discussions page.
    You'll get 5 very relevant topics right away.
    Jeff

  • Blu-ray Error:'fatal error", Code:"6", Note: "Empty palette in IG composition.

    If i try to burn or create an ISO I get this error.
    Blu-ray Error:'fatal error", Code:"6", Note: "Empty palette in IG composition.
    Any one have an idea what this means?
    Maik

    Fixed!
    I had a broken /incomplete button in a menu. After replacing it with a new button everything worked.
    Maik

  • Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''

    Has anyone encountered this: Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''
    Any ideas on what it means or how to fix it?
    Burning to a BD-R.  Tried two different Blu-ray burners.  Created a Blu-ray Image first.

    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Also, Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

  • How OC4J handles fatal error codes

    1. Does OC4j cleans/closes all connections in the connection pool when OC4J detects fatal error codes? Does OC4J really work as per oracle documentation? Can I get an example showing how is it done?
    Oracle Documentation says:
    For each data source defined in data-sources.xml, you can define fatal error codes that indicate that the back-end database with which the data source communicates is no longer accessible. When OC4J detects one of these error codes (stated when a SQLException is thrown by the JDBC driver), OC4J will clean its connection pool. That is, it closes all connections in the connection pool. For Oracle, the predefined fatal error codes are: 3113, 3114, 1033, 1034, 1089, and 1090.
    2. When OC4J detects fatal error codes defined in an connection pool in data-sources.xml, how connections in the connection pool are handled by OC4J?
    3. When OC4J detects fatal error codes on one connection to Oracle database, then will OC4J restore / close the connection back to connection pool?
    4. Does OC4J really work on fatal error codes?
    Sample code of connection pool I used in data-sources.xml file where I defined fatal error codes:
    <connection-pool name="FSCMDS" inactivity-timeout="30" initial-limit="5" max-connections="5" validate-connection-statement="select * from dual">
    <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="" password="" url="" commit-record-table-name="">
    <proxy-interface sql-object="PreparedStatement" interface="oracle.jdbc.OraclePreparedStatement"/>
    <*fatal-error-codes*>
         <*error-code code="3113"*/>
    </*fatal-error-codes*>
    </connection-factory>
    </connection-pool>
    Please post answers on these questions...
    Thanks
    Venkat

    This forum is for general database questions, post your question here:
    OC4J
    Werner

  • EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

    I keep losing my network connection for a few seconds at a time.  Not  a big deal unless I just spent time filling in a form and have to redo it.
    Getting:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8.  I just installed the new ARRIS
    TG862 provided by Comcast. 
    Any Ideas?
    Also get the following errors in my events:
    The name "WORKGROUP      :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
    Realtek PCIe GBE Family Controller is disconnected from network.
    Any help is appreciated

    Hi,
    Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
    BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
     Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
    How to use Skydrive
    http://www.wikihow.com/Use-SkyDrive
    Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
    check device status in device manager, please also keep the all latest driver update of your PC.
    And for error 36888, I found a similar thread, please refer to this link
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
    Regards
    Yolanda
    TechNet Community Support

  • Encore CS4 bluray error: fatal error, code "6" Internal error m_ptsOfNextGOPis empty

    I am using Encore CS4 4.0.1 (the latest version from what I can see) on Mac OSX 10.6.3
    I am on a Mac Pro 1,1 with 2 2GHz Xeon Dual Core Processors
    I have 5 GB of Ram
    The Mac has the standard Nvidia 7300GT.
    I have successfully created several BD and DVDs and nothing has changed.
    I have a 1080 50i BD h.264 project with 2 hour 37 minute timeline and I am looking to create an h.264 BD 25 image. The project has two menus: a main menu with two buttons and a chapter selection menu with 7 buttons. Check project reveals no issues with anything.
    I have searched the forum and tried the various solutions I found such as disc name, etc. The name is all in capitals with no spaces.
    I googled and found msxml problems/solutions and other such things related to windows that do not apply to me as I am on Mac.
    I get the following error at the very end of the build process:
    Encore CS4 bluray error: fatal error, code "6" Internal error m_ptsOfNextGOPis empty
    Any ideas? Hope I gave enough information. Thanks in advance

    I do not know exactly what the problem was with the menu. I am assuming the menu was the problem because when I created a new encore project with the same video, audio and photo assets but with new menus there was no problem. I think that at the time I read there some people were having a problem with the template I originally used for my menus so I simply built a new menu from scratch in PS CS3. I think the original menu was party menu hd.
    Sorry if that is vague but it worked so I did not look any further into the problem and I have not had any recurrence.

  • HP Pavilion A6528 P Error Code: Bio HD - 3 "No bootable drives detected."

    Hi,
    I initially had a Bio HD - 2 error message, the computer would not boot.  So after unplugging and replugging the Sata cables and  running the diagnostic test I concluded that the hard drive may be shot and since I do not have another computer with a sata interface to test the hard drive, I purchased a new HD (Western Digital with the exact same specs) and installed it. After the installation the computer still would not boot ,so I ran the diagnostic again and apparently the HD was recognized and passed but now I have a new error message stating that while testing: boot path,   the error states  Error code: Bio HD - 3  "No bootable drives detected."I searched the board and could not find the definition for this error code.
    Please advise.
    Thanks

    Try this procedure:
    Unplug the PC and open it up. Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. Then clear the CMOS. Plug your PC back in a give it a go.  You might consider trying to use a different motherboard sata port for your hard drive.
    Unplug all external devices other than the mouse, keyboard and monitor.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for

  • How do I install FF on a drive other than Win 7?

    I'm trying to conserve space on my SSD (small) and just have the OS (Win 7) on that drive. So how do I install FF on another drive, as so many of my other application programs are stored? They work great without any hitches, so far. . . But I would s

  • Why does image trace not align with the image?

    I'm using a fully updated version of Illustrator CC 2014 to trace images that have had the background removed by the client. No matter what settings I choose, it appears the tracing result is offset slightly in both X and Y axis. See my screenshot be

  • Elements 9 + How do I print a photo and it's properties?

    I'm new to Elements an am learning a new camera. I took a series of photos, all the same image, each using the different settings of my camera. I want to print a contact sheet, preferably, that has the image properties below each image so I can compa

  • My iphone 5 camera is not working how can i fix this problem ?

    My iphone 5 camera is not working how can i fix this problem ?

  • Combo boxe selection

    I have a table with a column havin combo box, I need to select the selections made in the comboboxes for each row into an array list....can somebody help me?