Hp mini 110-1100 ram

I was wondering if the ram can be expanded to 2 gigs

Hi,
Yes you can. Your machine has only one slot therefore you have to throw away the existing 1Gb piece and buy a new 2Gb piece of RAM. You can buy from the following link or use this info to buy elsewhere:
http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+Mini/HP+Mini+110-1100-upgrades.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Mini 110-1100 CTO keyboard not working fully

Hello, everyone;
My Mini 110-1100 keyboard is acting strangely. Most of the time, certain keys will not register as being pressed. Space bar, the left shift key, t, y, [, ], z, x, c, v, and m all do not work when this happens. Sometimes (rarely) all keys will work from boot. In addition, when it's not working properly. after using it for a few hours or so, the keyboard will randomly work. I'm assuming it is a software problem as opposed to a hardware issue because of this. I am running XP Service Pack 3, with all available updates. I have also tried reinstalling both the keyboard and touchpad driver.
If anyone has any suggestions, it would be appreciated. Thank you!
-Don

Ok, so the drivers are current, an external keyboard works, you could try restoring the system to a date when the keyboard was known to work but I doubt that it would fix it, most likely it is a hardware issue, in which case you should check your warranty and call HP.
Warranty:
http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
Contact HP:
http://welcome.hp.com/country/us/en/contact_us.html
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

HP Mini 110-3150CA - RAM Upgrade?

I just picked up a HP Mini 110-3150CA - I have 1gb Ram - But I would like to upgrade to 2GB ram -- can this be done? And what type of Ram do I buy?

Here is the Manual.
Manual
Instructions for upgrading memory are on page 51.
It uses DDR2 laptop memory 667 mhz which is commonly available even at a store like Best Buy. It only has one module so you have to replace the 1 gig module in it with a 2 gig module. You will be glad you did. It will run much better on 2 gigs.

HP Mini 110-3616 RAM Upgrade

My Father in law is looking to buy a HP Mini 110-3616, they come with 1GB RAM (and Windows 7 Starter), I haven't ssen one of these, is it easy to increase the RAM, will it make it a lot faster?
Thanks
Steve

Here is your spec. sheet again and it says that you are running a 32 bit OS, so the max that you are going to use is 2 to GB.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02780828&tmp_task=prodinfoCategory&lc=en&dlc=en...
A 4 gig stick will probably work in there, but the BIOS may not see it and as Paul suggested, try to get one from a friend to test it out.
As for the HP compatibility listing, I think it's wrong, HP has printed the wrong information before.
Run this scanner from Crucial and it will tell you how much memory for sure it will handle.
http://www.crucial.com/systemscanner/
Is that 71 £ for the 2 GB stick, if it is, that's an outrageous price. Shop around a little more, a 2 GB DDR3 stick at 1333 MHz is common as dirt and should be around 20 to 30 dollars US. I am sure you could find something on e-bay.co.uk that will work fine at a fraction of the cost.
Forget e-bay, just get it direct from Crucial.
http://www.crucial.com/uk/store/listparts.aspx?model=HP%20Mini%20110-3105sa&Cat=RAM
It's still expensive, but better then HP's price.

Hp mini 110-1100 Rough distorted sound.

Need some help please.
My Mini has developed a problem with the quality of sound.
It has been come very rough/crackly/distorted.
Ive updated the driver and the os is windows 7 starter.
Any suggestions please.

I had same problem, same week,on HP mini 210-1100.I fixed it by uninstalling the IDT audio driver and software, version 6.10.6272.0,and installed version 6.10.6284.0 from the HP support & drivers page.

Hp mini 110-3016tu ram upgrade.

i took out the original 1GB DDR2 ram and changed it with a 2GB DDR2 ram already but i'm not sure why it still shows up as 1GB over at system properties...
why is this so?

Here is your spec. sheet again and it says that you are running a 32 bit OS, so the max that you are going to use is 2 to GB.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02780828&tmp_task=prodinfoCategory&lc=en&dlc=en...
A 4 gig stick will probably work in there, but the BIOS may not see it and as Paul suggested, try to get one from a friend to test it out.
As for the HP compatibility listing, I think it's wrong, HP has printed the wrong information before.
Run this scanner from Crucial and it will tell you how much memory for sure it will handle.
http://www.crucial.com/systemscanner/
Is that 71 £ for the 2 GB stick, if it is, that's an outrageous price. Shop around a little more, a 2 GB DDR3 stick at 1333 MHz is common as dirt and should be around 20 to 30 dollars US. I am sure you could find something on e-bay.co.uk that will work fine at a fraction of the cost.
Forget e-bay, just get it direct from Crucial.
http://www.crucial.com/uk/store/listparts.aspx?model=HP%20Mini%20110-3105sa&Cat=RAM
It's still expensive, but better then HP's price.

Mini 110 software

have hp mini 110 1100 p/nvf704av hard drive died cannot find this p/n in hp list to try to get software
This question was solved.
View Solution.

fixed by talking to HP on phone thanks

HELP...HP Mini 110 Won't Boot Windows !?!?

Hey Everyone,
Please read in full and thanks for taking the time to read my problem.
I have a HP Mini 110 - 1100 running on Windows XP. Recently while using my computer, it started to get slow and eventually freeze. Even though I tried to shut down properly, I couldn't and was forced to reset by holding the power button. I've had to do that very few times in the past and usually everything ends up okay. But not this time ! The computer loaded and came to a black screen where the choices of (Safe Mode, Safe Mode w. Networking & Command Prompt, Last Known Configuration and Start Windows Normally) were displayed. I tried Last Known Configuration but as the OS was loading, the Windows XP screen froze, the BSOD (Blue Screen) quickly flashed, and the computer automatically rebooted. This resulted in a reboot loop that was never ending.
STEPS IVE TAKEN:
1. I tried to enter Windows through all the aforementioned choices.
2. I pressed F10 to enter the BIOS in which I restored all default settings.
3. Attempted to do a hard reset & nothing happened..may have done it wrong...but I tried several times.
4. Pressed F8 (holding down & pressing repeatedly) to get to the "Windows Advanced Options Menu: (http://devilsworkshop.org/files/2009/06/68224pick-last-known-good.gif)" but the Boot Manger came up instead:
Here, it asks me to choose an OS which is Win XP, and when chosen loop begins again.
From here, I pressed F6 accidentally which took me to the Roxio BackonTrack recovery. I restored with last available saved settings (Apr 26).
5. I took a Hard Disk Test in the BIOS which showed positive results...right?:
Passed - Restart the system (10000)
SOME OBSERVATIONS:
1. I enabled Instant Web so I can at least use something and it works. I'm actually using it now to post this.
I am able to establish a wireless connection.
I can view/listen to pictures/music that I have on my computer. Yet, I am unable to retrieve it for backup.
Instant Web recognizes my USB/SD connections.
Instant Web is syncing time with Main OS...does this show OS is still in working order?
THINGS TO POINT OUT:
1. Because the blue screen comes and goes so quickly, I am unable to aquire any error messages.
2. I did have Anti-Virus installed which scans for viruses everyday and nothing ever came up as a virus.
3. Everything was working perfectly right before this situation occured.
4. There is no CD Drive built in nor do I own an external harddrive.
As you can tell, I've tried various methods, but nothing seems to solve this.
Overall, my computer seems to be in a healthy state with working parts so I am confused on why the computer won't boot past the windows xp screen !
What could be the issue casuing this?
What steps can I take to solve this?
What is the proper way to get to the Windows Advanced Options Menu on a Hp 110?
Is something corrupt...What are HP 110's recovery options?
If you need any more specific information about my issue, just let me know!
I appreciate you all for reading this and please help assist me & contribute in any way that you can.
Thank You!

I'm going with simple corruption of the hard drive boot files. A chkdsk C: /r will likely fix it. If you can get into safe mode command prompt you can run that command from the prompt and it should scan the hard drive and repair any file system errors. You apparently have no mechanical problem with the hard drive (i.e. bad sectors).
if you cannot get into Windows via safe mode (it looks like maybe you have tried that)....you may need to get a copy of somethign like Hiren's boot CD:
http://www.hiren.info/pages/bootcd
Or any kind of a Windows preboot environment CD or memory stick to boot the computer and run chkdsk c: /r from the command line.
http://www.nu2.nu/pebuilder/

Hp mini 110 RAM

im thinking of upgrading the ram on my hp mini 110-3601 sa but it got a choice of 2 the first one is : 2GB, 1600MHz, 240-pin, PC3-12800, shared DDR3 SDRAM Small Outline Dual In-Line Memory Module (SODIMM) andthe second one is: 2GB 1600Mhz PC3-12800 memory module (SHARED) i want toknow whats the diference between them and which one is better as im running w7 home premium can anyone help?
This question was solved.
View Solution.

Hi,
For RAM we need the machine is going to work, doesn't matter more expensive or faster. Please get the proper specs using the following scan:
http://www.crucial.com/systemscanner/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem after ram update hp mini 210 1100

hp mini 210 1100, intel atom 475, win 7 starter 32 bit:
after upgrading to 2 giga ram computer does not work properly - win does not start or if starts freezes with black screen.
new memory stick is ok - works properly on another same computer.
when original 1 giga stick reinstalled computer functions well.
need help...
thanks

Hello yoyo5. I understand you're having trouble booting after installing new RAM.
What are the specifications of your new RAM? It is possible it is incompatible with the motherboard.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

How to upgrade RAM on the HP Mini 110-313?

It says the HP Mini 110's are user-upgradable RAM to 2gig.
How would I do this?

There should be a little door on the bottom of the machine where the memory chip is. Just order the memory and pop the old one out and put the new one in.
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

Hp mini 110 parts needed

Is it possible for me to still buy a cheap official battery for my HP mini 110 because its battery right now only charges to 5 Percent and then dies after 10 min

Dany try here.
http://www.ebay.com/itm/Original-HP-Compaq-Mini-110c-1100-110c-1100DX-110c-1105DX-Battery-BX03-/2214...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

2 GB Memory upgrade for HP Mini 110-3025tu

I recently bought this laptop HP MINI 110-3025tu
Specs
-atom n475
-1gb DDR2
My problem/our problem is this.
When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
Please tell me if i can do something to fix this problem
Much thanks!
Joe

Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP mini 110- 3500 laptop fails to boot after SSD upgrade

Hello,
I recently bought a "crucial 250gb 2.5 " SSD and 2gb RAM (also by crucial), to upgrade my HP mini 110-3500 laptop, which was exceedingly slow. But unfortunately, the laptop has refused to boot when powered on. What can I do? I am very worried.
Enkay1

You answered. That is what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will run at the higher voltage (1.5 volts) but it is just not the ideal memory for the older hardware. You need DDR3-1333 memory as HP specified for the laptop. You can confirm or refute my diagnosis by putting in the old memory and see if she boots. This is the part mumber you need: 621567-001 http://www.ebay.com/itm/2GB-COMPAT-TO-621567-001-A3803335-A4100445-A4427375-/230655741975?pt=LH_DefaultDomain_0&hash=item35b4275017 Does your memory have 8 black blocks on the side or just 4? You want 8. Also if you have Windows 7 Starter you cannot use 2 gigs of RAM. If this is "the Answer" please click "Accept as Solution" to help others find it.

Hp mini 110-1100 ram

Similar Messages

Maybe you are looking for