HP Mini 110 - 4108TU , Change display unit

Hi ,
In the screen resolution setting under display it shows Digital Flat Panel ( where as I am using my laptop screen itself ). Because of this my screen does not fit into the display of my laptop screen.
The resolution selected is 1024 x 768.
Please help me as to how do i change the display .
Regards.
Vasant

That is too bad about system restore not being enabled. I can understand that, considering how small the mini's hard disk is.
Follow the instructions on the follwing Microsoft web document
http://windows.microsoft.com/en-us/windows7/change-your-screen-resolution
if no joy, then reinstall the Intel video driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108064-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Hp mini 110-4108tu upgradation

How To Upgrade the my hp mini 110-4108tu

Hi,
The following link shows its specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03194931
For cost/performance, upgrading the HDD to SSD otherwise buy a new machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP mini 110-4108TU network and bluetooth related queries

Hi, I cannot use the bluetooth in my Hp mini 110-4108TU, I tried to add device but couldn't connect my mobile via bluetooth as a result i cannot transfer files. Do I need to install driver for bluetooth, if yes then please help me about the driver. Also I would like to know how I should be able to use wi-fi and wlan, do drivers need to be installed also? Are the wi-fi and wlan inbuilt? In the device manager I see Atheros and Microsoft virtual wi-fi adapter present, what are these?
I have attached the image of the device manager pop-up box.

aratipatel wrote:
hp mini 110-4108tu blutooth driver
Hello aratipatel.
You will find your bluetooth's drivers in the "Network" section of this page.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

My hp mini 110-3518cl is displaying hard disk not exist.

Hp mini 110-3518cl windows7 starer is displaying hard disk not exist

Your friend did the pretty much standard procedure to see if any files can be read and retrieved from the failed hdd. There are data recovery companies out there but they aren't cheap. It is always advisable to have an external usb hdd for backup.
All hdds fail after time ,though laptop hdds seem to have a higher/faster failure rate due to the confined case and extra heat. SATA hdds seem to die much faster than the older Ide type drives in laptops and desktops from what I have seen.
Not uncommon to see posts about a laptop hdd dying after 1-1 1/2 years,though I have been fortunate with mine which is 3 yrs old. I do use a laptop cooling pad under mine which may contribute to it's longer life.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How can I connect my MBA 11" 2012 to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

Welcome to Apple Support Communities
Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
You can still use your iMac as an external display, using an application like ScreenRecycler

Correct display settings for hp mini 110

can someone please tell me what the correct display settings are for the hp mini 110? thank you!

@ebernier ,
Hello and thank you for posting on the HP support forums. Please check out the following link it will help you when posting so that we can help you better.
Advice for asking the "Very Best Question"
As for correct display setting. What ever setting you find most comfortable is the best.
Please post back if you have any more questions. As well include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

New document - changing the displayed unit in width/height?

Hi all,
Sorry for this basics question relating to InDesign CS5...
When creating a new document, with a custom size, the default size is showing as XXp00 - I don't know what the 'p' means nor it's relation to other units such as cm or mm.
Is there a way for the default to be cm, or mm?

XXpYY is the established convention for displaying picas (6th of an inch) and points (12th of a pica). 3p0 is 3 picas,0 points, or half an inch. 13p6 is 13 picas, 6 point, or 2.25 inches.
You can type any units you like in any dialogue or panel and InDesign will handle the conversion to the currently displayed units. If you want a page 14 inches wide, just type 14" and InDesign will accept that and display it as 84p0.
You cannot change the default units while a modal dialogue (like New Document) is open. You can change the default units in Preferences. You can also change the displayed units in the current document by right-clicking on the ruler. Each ruler remembers its own units, so either change the units for both rulers or right-click on the intersection of the rulers at the top left of the window.

My hp mini 110: bios update screen is displayed but the process repeats again and again, plz help

My HP mini 110-3107tu: At startup HP Bios update screen is displayed with message "The system BIOS is being recovered"....Writing new BIOS image.....
Next message is displayed Verifying new BIOS image...
Thereafter "The System BIOS recovery is complete" message appears. But this process repeats again and again. Please help.
Is there a solution, how i can recover my netbook or should I take it to the service center

I have searched far and wide for a workaround that does not involve sending it to HP. Unforunately, I was not able to find such a workaround.
As a last effort, you can try these steps.
1. Power off the notebook completely.
2. Hold the windows key + b keys simultaneously.
3. Power the notebook on while holding those keys and keep holding them.
4. Let the keys go when you get a message about BIOS recovery.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I bought (used) a hp mini 110-1000 netbook that at the time had what appeared to be windows 7 starte

I bought (used) a hp mini 110-1000 netbook that at the time had what appeared to be windows 7 starter on the machine. After booting into windows, it displayed the blue screen of death. I didn't locate a recovery partition or was able to access windows system restore, so I ordered a windows starter usb system recovery and received it today. After trying unsuccessfully to reinstall windows I am at a loss. It gets about a third of the way installing the software on the system and then it says it failed. I ordered by both the model number (110-3000 , or product wy699av) and serial number {Removed for privacy}. I am at a loss as to what to do, as I have bought a usb recovery media and it won't continue the install. Nowhere on the netbook is a sticker declaring the os or the model number so i researched by the other model #'s i found listed..Please help, and thanks.

I dont know how they had windows starter on this unit, but the sticker is for xp. Guess I bought a recovery usb stick that is usless to me, and now I'm stuck with it. I also checked the bios and it said it had a non vista os, after I found out how to get into it. I still don't understand how I was able to order the win 7 starter recovery usb, even after I input the serial number into the form. I would have thought it wouldn't allow me to order an incorrect os.

Can you change the units used for size and position in layout editor?

Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!

Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie

Exactly what partitions is the BIOS checking for when starting a HP mini 110?

My niece has a HP mini 110 that failed one day. On doing a bios hard drive check it failed (7 on read). I though I'd have to get a new one so I ordered another. While waiting for this to arrive I got access to a SATA usb bridge and as the opperating system was beyond repair and the disk unreadable by the HP mini, I decided to try to repair the disk. So I reformatted the old drive using my desktop computer. Windows had no problems with the drive and it seemed to run fine.
I also had to order the recovery disks (windows 7 intro).
Anyway on trying to reinstall using the recovery disks via USB DVD drive. It kept coming back with error 17 - which I found to be a hard drive error. I also tried installing using a Windows XP installation disk and this was more self explanatory it said there was either NO hard drive installed - or 'it didn't match the hardware specs for the unit' (or words to that effect)
On getting the new hard drive - same problem. Even though both of these hard drives work as USB drives connected to my main desk. SO, my conclusion is that on boot up the BIOS inspects the hard drive, checks to see the configuration of the formatting. i.e. the size and partitions etc. and when these are not matching the BIOS idea of proper specs it rejects the hard drive and considers there is none installed. Or perhaps there needs to be some basic files on the hard drive. Whatever the case, the bios concludes there is no hard drive and will always return a 'fail' in the bios hard drive test.
Any ideas on this? I need to find out exactly what partitions are expected by the bios. Does anyone have these specs, or perhaps you have a HP mini and can examine your hard drive and tell me the partition amounts and sizes?
Unless I can get the bios to recognise the hard drive I can't see how I can reinstall the OS on to it. Any and all help much appreciated.
Thanks
When it comes to fixing computers the longest word in the English language is "JUST" . . . as in 'you just do that and it will work' :-)

beevo you have used your logic to come up with the answer but in this case you are just a little bit off. The hard drive error you see in the BIOS is a SMART error. This is read out by a chip inside the hard drive itself working in conjunction with the BIOS. The chip stores data and is constantly testing the drive and if the read time or seek time or such such parameter is out of whack it reports that to the BIOS and you get a SMART error. It is a pure hardware thing and has nothing to do with any partition scheme or anthing else to do with the actual contents of the drive. A blank hard drive (written with all 0s) will still throw off a SMART error if there is such an error. SMART errors vary in severity but my rule of thumb and the mainstream thinking on this is treat a SMART error like a diagnosis of an incurable cancer. The patient might live a while but his days are numbered. Back up, as stated above, and buy a new hard drive which you have apparently already done.
A drive with errors will sometimes format fine in Windows and work just fine as an external type drive with a usb connection but you would not want to use it for an operating system.
The fact that WIndows XP is not seeing the drive on installation is a Windows XP thing. Windows XP does not recognize SATA hard drives. You need to slipstream in a SATA driver while you run XP installation by either modifying the install CD or using a usb external floppy disk.
To be clear, have you tried the recovery disks with the new hard drive and you still get the error or you have only tried to install XP on the new drive? If you are getting the error 7 with the new drive, you may have bigger problems such as a bad storage controller on the motherboard. That kind of error can cause the BIOS to read out a SMART error, too. You might want to try a hard reset on the computer by removing battery and AC adapter, hold down the power button 30 seconds and then try to start it with the AC attached. You can also boot it with no hard drive in and try resetting the BIOS to default settings and try the hard drive again.
Also to be clear, is the error 7 actually showing up in the BIOS or is it showing up during installation from the recovery disks? Are the recovery disks Windows 7 or XP?

Changing Base Unit Of Measure in Material Master

Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
Regards

Hi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP Mini 110 - 4108TU , Change display unit

Similar Messages

Maybe you are looking for