HP mini 110-4108TU network and bluetooth related queries

Hi, I cannot use the bluetooth in my Hp mini 110-4108TU, I tried to add device but couldn't connect my mobile via bluetooth as a result i cannot transfer files. Do I need to install driver for bluetooth, if yes then please help me about the driver. Also I would like to know how I should be able to use wi-fi and wlan, do drivers need to be installed also? Are the wi-fi and wlan inbuilt? In the device manager I see Atheros and Microsoft virtual wi-fi adapter present, what are these?
I have attached the image of the device manager pop-up box.

aratipatel wrote:
hp mini 110-4108tu blutooth driver
Hello aratipatel.
You will find your bluetooth's drivers in the "Network" section of this page.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

Hp mini 110-4108tu upgradation

How To Upgrade the my hp mini 110-4108tu

Hi,
The following link shows its specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03194931
For cost/performance, upgrading the HDD to SSD otherwise buy a new machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

Wireless network and bluetooth not working on touchsmart 600

This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please advise

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

TS1398 My Wifi Networks and Bluetooth Bars are greyed out and unavailable.

How do I get them to turn back on? I have already restored it through iTunes and reset network settings on the ipod touch.

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HP Mini 110 - 4108TU , Change display unit

Hi ,
In the screen resolution setting under display it shows Digital Flat Panel ( where as I am using my laptop screen itself ). Because of this my screen does not fit into the display of my laptop screen.
The resolution selected is 1024 x 768.
Please help me as to how do i change the display .
Regards.
Vasant

That is too bad about system restore not being enabled. I can understand that, considering how small the mini's hard disk is.
Follow the instructions on the follwing Microsoft web document
http://windows.microsoft.com/en-us/windows7/change-your-screen-resolution
if no joy, then reinstall the Intel video driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108064-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

MD04 Transaction and MRP related queries

Hello All,
i have some specific questions regarding MD04 and MRP Run
1. In MD04 for few raw material i am getting -ve available quantities , i am not getting why MRP didn"t run for the same before available qty become negative , we have a batch job schedule for MRP run .
what all the possibilites of not running the MRP ,
We don't have reorder level planning ! MRP type`is standard one PD .
2. For some material we are not able to create a planned order, settings in Material Master MRP view is fine as we have another material with same settings are working , i am running the MRP through MD41 Transaction code >
Forecasting is done through MD61/62 active indicator ticked >
what else could be the reason .
Secondly one silly question does MRP take into consideration available stock during run , i mean if i run the MRP for a material with Tcode MD41 , will MRP create Planned orders , even if enough stock is available >
Thanks for coming back in advance .
Thanks and regards

Look for the MRP list as well (MD05), not only the Stock/Requirements List (MD04).
You can see there the date and time of the last MRP run, and if there was a termination that did not allow the proper run.
There may be a number of reasons why a material was not included in the MRP run, like what type of run (e.g. regenerative or net change), etc.

HP Mini 110 - No audio after replacing hard drive and installing XP

My wife's Mini 110 recently died and I had to replace the hard drive. I got everything up and running fine except for the audio. The driver on the HP site for the 110 will not install as it says that there is no device installed for that driver. In the Hardware list, there is a PCI Device with a question mark and I cannot get it to find a driver. Even after installing the chipset driver and flashing the bios there is not audio device working.
Can anyone out there help? I'd really appreciate it!
This question was solved.
View Solution.

Try and install audio driver from here and check... ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44799.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

WLAN Driver XP Problem on HP Mini 110 3504TU

Dear all,
I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU
"Network Controller?"
Hardware ID:
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
PCI\VEN_14E4&DEV_4727&CC_028000
PCI\VEN_14E4&DEV_4727&CC_0280
Product Number : XV876PA#UUF
SN : {Personal Information Removed}
My googling results : wlan chipset is Broadcom. I have tried ALL of my search result links (Official HP's Driver Link) on google but just get nothing,
I've tried anyways to install All of Downloaded Drivers Files (my googling's search)
in Normal Setup Sequence and Manual way, via "Update Driver" Menu on Device Manager
but No anymatches found.
Thanks in Advance before...
Regards,
Dave. N
This question was solved.
View Solution.

Hi Paul Tikkanen,
Yes!, your suggested driver is work!
I very appreciate for your help response.. *shakehand*
*Special Big Thanks,
Best Regards,
Dave. N

HT4628 My Mac mini has decided to continuously drop off my wifi network and is incredibly slow to open a web page. Wifi is working perfectly with other devices.

Hi my Mac mini will not stay on the network today and is slower than a pc to lad a web page.
I've followed various suggestions off the web and still have the same problem. 1 second the network is available and working slow and the next it says in network diagnostics that ISP has failed. The router is fine as I'm using an iPad and iPhone and all is working perfectly at +5 Mbps however when I try to open yahoo in safari it take about 5 minutes to open the page and then when I try to create a new mail I get the same Tim delay and then can't enter a send to address!
I've never managed to sort out email either but it not for a lack of trying about 30 different suggestions.
I'm fairly new to mac and am getting very very frustrated with not being able to solve these problems.
Can anyone please steer me towards a step by step or screen by screen resolution please please please help?

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart your router and your broadband device, if they're separate. Any change?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
Boot in safe mode and test. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

My iphone wifi problem wont detect any wifi networks and wont detect any bluetooth networks.

my iphone wifi problem wont detect any wifi networks and
wont detect any bluetooth networks.

https://support.garmin.com/support/searchSupport/case.faces?caseId=%7Bb62e0460-4 d48-11e3-f27b-000000000000%7D from the Garmin Support site. The iPhone 4 is not compatible because it does not support the low energy bluetooth transfer that the iPhone 4s and later do.
It should connect properly with your iPad mini, but it requires an App. Also mentioned on Garmins' site.

For run bluetooth in hp mini 110

i couldn't run bluetooth in my hp mini 110-4100 .how can i run though it is installed in my gadget.

Hello Homnath.
Are you getting an error when trying to use the device?
Has it ever worked properly?
What version of Windows are you using?
Try the steps outlined in this document and let me know if they help.
Have a lovely day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Trying to connect 2 mac mini's as a network, and sharing printers

Hello to all. Please help me as I'm a newbie on these Mac mini's. I am trying to create a network between the two mini's and I would like to share files between them and be able to print from the upstairs mini to the printers hooked up to the downstairs mini.
Mini 1 (downstairs) has 2 printers attached directly, a HP color laserjet and a Epson 800 Artisan
Mini 2 (upstairs)
Mini 1 and mini 2 are both connected via ethernet to the Netgear router.
Here is my problem:
on the mini 1, I can print and even access the mini 2 via sharing. I can screen share and view folders that is on the mini 2.
However, from the mini 2 computer, I cannot get the screen share and folder sharing from the mini 1 computer. I show that it is there, but when I try to connect, I get a message that states: CONNECTION FAILED The server may no exist or it is not operation at this time. Check the server name or ip address and your network connection and try again.
On the mini 2 I also cannot get anything to print. It doesn't even show that the printers that are supposedly shared at the other computer are present. I tried to add them, via default icon or even ip from the print and fax preferences, but I get error messages and cannot print.
ON THE mini 2: When I used the 'default printer' icon, both of my printers showed up using bonjour shared and I 'added' them. But when I tried to print, I got a message stating:
*Connecting to downstairs-mac-mini.local on port 631...*
*Unable to connect to printer; will retry in 30 seconds....*
I deleted both printers as bonjour shared and tried to make the printers an ip internet shared, and put in the ip address xxx.xxx.1.2 (mini 1 ip address) but I got a message saying that that ip address was being used. I changed the ip address to xxx.xxx.1.5 (mini 2 ip address) and it looked like it was going to print, but it automatically goes to pause. (doesn't matter which printer it is, I can't print from either. I never did get either of the printers to work on mini 2.
I have done the following: On the mini 1, the printers are marked shared. On both computers the shared folders are marked shared, along with screen sharing. I also added all files on both computers to be shared as to who can read only or read and write.
Also, I have also gone to the 'system' icon and on internet sharing, I have made both computers to be shared, with the appropriate check marks done on the list of services I want shared.
ON both the mini 1 and mini 2 I have set the network to XXXXX Home and it automatically configured and states that my ethernet is connected.
On the downstairs computer, I can see the 'shared computer, and am able to access the files.
BUT on the other computer upstairs, I do see the downstairs computer, but it fails in the connection.
I noticed that the ip address for each computers state the same number, except the last digit is different. xxx.xxx.1.2 for the downstairs mini and xxx.xxx.1.5 for the upstairs mini. The router number and dns server along with the subnet mask are the same numbers between both of the computers.
I am going to set the power settings NOT to sleep when idle so that might help when I am trying to view files on each mini's.
So right now I am stuck with how to make the upstairs mini to print on the downstairs printers, and how to see the downstairs mini on the upstairs mini display.
Any help from anyone is very much appreciated. Sorry this is so long. Thanks in advance!

Mini 1 Allow only essential services
Mini 2 Allow all incoming connections
I changed mini 1 to allow all incoming connections
That did the trick for viewing, now will that help me on my printer issue also? YES! wahoo! Thanks so much, I would have not thought about checking the firewall.
Kudos to you and all your help!

Bluetooth Network and Internet sharing issue

I'm trying to set up a network through Bluetooth between two computers having the latest Toshiba Stack installed, and to share the Internet connection with the second computer.
On the firs computer I've set the Internet Connection Sharing, and because of this it automatically sets the TCP/IP adresses for the Bluetooth Personal Area network (192.168.0.1).
On the 2nd computer, i've set everything to obtain it automatically. Firewalls (Kaspersky) disabled.
When I connect the 2 Bluetooth devices, everything looks fine, the 2nd automatically obtains the IP adress, I can ping both computers, and the Internet also works on the 2nd computer, for a few seconds! After that, it appears like the 2nd computer is disconnected from the network... what could be the problem?
In the event viewer under the System tab, I've found Informations like these:
2nd comp:
The system detected that network adapter \DEVICE\TCPIP_{E44D18EB-91F5-4... was connected to the network, and has initiated normal operation over the network adapter.
The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.
and at 1st comp also appeares this:
The system detected that network adapter Bluetooth...Area Network - Packet Scheduler Miniport was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

================================================== =========================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 17 31 27 e6 10 ...... Intel(R) PRO/1000 PL Network Connection - Packet Scheduler Miniport
0x20004 ...00 60 52 0b 53 e3 ...... Realtek RTL8029(AS) PCI Ethernet Adapter - Packet Scheduler Miniport
================================================== =========================
================================================== =========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 195.222.104.193 195.222.104.219 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 30
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 30
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 30
195.222.104.192 255.255.255.224 195.222.104.219 195.222.104.219 20
195.222.104.219 255.255.255.255 127.0.0.1 127.0.0.1 20
195.222.104.255 255.255.255.255 195.222.104.219 195.222.104.219 20
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 30
224.0.0.0 240.0.0.0 195.222.104.219 195.222.104.219 20
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 195.222.104.219 195.222.104.219 1
Default Gateway: 195.222.104.193
================================================== =========================
Persistent Routes:
None

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

HP mini 110-4108TU network and bluetooth related queries

Similar Messages

Maybe you are looking for