HP Mini 110 battery on 2133 Mini-Note

Is it possible to put battery from HP Mini 110 on 2133 Mini-Note??
Thanks in advance on every comment.

Hello,
I have a similar issue with battery charging.
HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
So I have purchased new battery...
Now HP Battery check shows same for the new battery:
Replace (40),Current State: Charging (0%)
Computer is HP Mini 110 3010sq
BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
I have noticed status for "cell voltage 4" is 0 mV for both batteries.
What could be the problem here?
Any support is appreciated.

Similar Messages

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Hp mini 110 battery stuck at 0% (plugged in, charging) but not charging

my battery was working fine this morning, lasted a good 5 hours on full charge... then hp support assistant asked me to update itself and install a whole bunch of drivers for the WLAN and BIOS and all that, so i did. if i remember correctly, the battery at the time the update finished was around 20% and charging... then i unplugged the AC adapter to move it to another spot in my room, then the computer shut off completely... when i plugged it back in and rebooted the battery indicator was stuck at 0% but says (plugged in, CHARGING)....*not "not charging"... so i dont get it... i've left it alone for an hour and still says 0%... i rebooted and nothing changed.... i did a system restore to bring it back where it was before i did the hp support assistant update....nothing changed...
i honestly don't believe it's a problem with the battery itself because it was working fine until today.... and i didnt yank the adapter out of the socket either...
Any ideas?

Hello,
I have a similar issue with battery charging.
HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
So I have purchased new battery...
Now HP Battery check shows same for the new battery:
Replace (40),Current State: Charging (0%)
Computer is HP Mini 110 3010sq
BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
I have noticed status for "cell voltage 4" is 0 mV for both batteries.
What could be the problem here?
Any support is appreciated.

HP MINI 110 BATTERY

I purchased a HP 110 mini netbook from Amazon. The battery will not click into place and it falls out. I purchased 3 days ago but don't want to return it as i've set up all my contacts etc. I notice on the internet that this has been a problem. Has anyone found a solution?

Hello,
I have a similar issue with battery charging.
HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
So I have purchased new battery...
Now HP Battery check shows same for the new battery:
Replace (40),Current State: Charging (0%)
Computer is HP Mini 110 3010sq
BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
I have noticed status for "cell voltage 4" is 0 mV for both batteries.
What could be the problem here?
Any support is appreciated.

HP Mini 110-3700 built-in camera not working

I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
Thank you!

bamba-ista wrote: built-in camera not working properly. what do i need to do?
How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.)

HP MIni 110-1030nr - USB Problem!

Hello!
I have 2 HP Mini 110-1030nr netbooks. Mine runs like a charm! I love it!
My dad's however is having major problems! For the first 2 weeks it ran great, but then the hard drive died in it. We sent it back to HP, they turned it around and had it back to us in less then 2 weeks! Great service!
But now, as we have been re-installing his software we have discovered the USB ports do not work right anymore. For example, my dad bought an external Samsung cd/dvd-rom drive. It just doesn't work right. It is unrecognized sometimes, or else it will show up but it can't see that a disc is inserted. Same goes for all USB devices... we attached an external WD Passport Hard Drive and it is not recognized either. The Hard Drive lights will light up momentarily and then just go dark. But when you disconnect the hard drive, Windows plays a little "disconnect sound" as if it knew it was there. Other times the hard drive will be recognized and work just fine, or it will work good for awhile then go dark.
Some items work fine on the USB ports... we have a little Verizon Pantech USB Data Modem, it seems to work good. And a little Sandisk 8GB USB thumb drive seems to work good consistently.
Could this be a power issue? Or something goofy on the mother board?
All these devices work 100% superb on my own HP mini, no hiccups at all. Need help! Need to know if I need to send this back to HP or if there is just a setting somewhere that I'm missing? I've tried going into the BIOS (F10) but there are hardly any options to change and none of them deal with USB.
Thx!

figured out how to remove the hard drive. You remove the battery and there are 3 small phillips screws. Remove and put in a safe place. The screws hold three small metal tabs in place. With the screw removed, take a small flathead screwdriver and push the tabs up toward the keyboard carefully!!! This will lift the back edge of the keyboard nearest the lcd screen up in the air. Then turn the laptop over and grab the back edge of the key you just pushed up and pull it towards the keyboard and the keyboard will easily come off. Make sure to CAREFULLY remove the plastic ribbon connector from the connecctor and that exposes the harddrive. The rest is very obvious and simple. Reassemble in reverse order.
[text removed for privacy]

Forgot Password on HP mini 110

Hi
I forgot the windows login password on my Hp mini 110-1135 CA
There are not message appearing after 3 tries.
It runs on Windows 7.
Tranks

jassye wrote:
There is not error code or message. It only says wrong password
Hi,
Are you talking about BIOS password or Windows password ? For BIOS password you need CNU*. For Windows password please try:
http://pogostick.net/~pnh/ntpasswd/
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My hp mini 110-3700 laptop say battery not present

My hp mini 110-3700 laptop say battery not present, but i can see the battery s/n under the system info

Please how can i fix this? I need your help please

HP Mini 110 bios is asking for a password after MoBo battery got unplugged !!??

I just got the "suprise-we-gave-you-bios-password" error after I was trying to fix a hard drive & keyboard for a HP Mini 110 1116ca. The on-board battery got unpluged and now it asks for a bios password.. grrrr!
Why does HP do this!!?? re-seating a mobo battery & jumper is suppose to reset bios passwords not give you one.
Much thanks if you can help!
error:
CNU9425WSM
This question was solved.
View Solution.

Hi,
Try entering: e9lofxu0hp ( Note that the 3rd character is a lower case L and the 8th is Zero )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 110-3000, unexpectedly shutdown when unplugged. Pass the "battery test" !

Hi,
My HP mini 110-3000 acts up recently.
It randomly shuts down.
Only when unplugged. (On battery)
No error message shown.
This happens when battery power is around 60%
It's definetly not thermal, the netbook lasts forever when plugged in. (unless running on battery makes it hotter ???)
But it doesn't feel any hotter. It's just warm to the touch, normal.
I also did the battery test as suggested, says that everything is fine.
Worked fine just a month ago.
The battery would drain normally, with warning message around 12% then sleep around 9%.
Now, it shuts down around 60%.
It was bought less than 19 months ago... I would expect something a longer lifetime.
Any hint would help.
Thank you
Etienne

19 months is on the short side but in the range of normal battery longevity. Given your description it is extemely unlikely to be anything other than it just needs a new battery.

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

My hp mini 110-3518cl is displaying hard disk not exist.

Hp mini 110-3518cl windows7 starer is displaying hard disk not exist

Your friend did the pretty much standard procedure to see if any files can be read and retrieved from the failed hdd. There are data recovery companies out there but they aren't cheap. It is always advisable to have an external usb hdd for backup.
All hdds fail after time ,though laptop hdds seem to have a higher/faster failure rate due to the confined case and extra heat. SATA hdds seem to die much faster than the older Ide type drives in laptops and desktops from what I have seen.
Not uncommon to see posts about a laptop hdd dying after 1-1 1/2 years,though I have been fortunate with mine which is 3 yrs old. I do use a laptop cooling pad under mine which may contribute to it's longer life.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP Mini 110-1100 CTO keyboard not working fully

Hello, everyone;
My Mini 110-1100 keyboard is acting strangely. Most of the time, certain keys will not register as being pressed. Space bar, the left shift key, t, y, [, ], z, x, c, v, and m all do not work when this happens. Sometimes (rarely) all keys will work from boot. In addition, when it's not working properly. after using it for a few hours or so, the keyboard will randomly work. I'm assuming it is a software problem as opposed to a hardware issue because of this. I am running XP Service Pack 3, with all available updates. I have also tried reinstalling both the keyboard and touchpad driver.
If anyone has any suggestions, it would be appreciated. Thank you!
-Don

Ok, so the drivers are current, an external keyboard works, you could try restoring the system to a date when the keyboard was known to work but I doubt that it would fix it, most likely it is a hardware issue, in which case you should check your warranty and call HP.
Warranty:
http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
Contact HP:
http://welcome.hp.com/country/us/en/contact_us.html
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

My HP Mini 110-1050NR will not start. Power LED, WiFi LED and Hard drive LED Flash

My Mini 110-1050NR just died... When I try to turn it on the Power Switch LED, the WiFi Switch LED and the Hard Drive LED just flash on and off. There's no specific count. They continue to flash until I disconnect the battery.

Hi there
I sent you 1 link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&tmp_task=solveCategory&cc=us&dlc=en&la...
Check this out and let me know
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

My Hp mini 110-3860sd keyboard not working

My Hp mini 110-3860sd keyboard not working

Hi rishabh_pandit,
Thank you for your query, I will do my best to assist you!
I understand that your keyboard is not working. Here is a document to assist with that.
Notebook Keyboard Troubleshooting (Windows 7)
If you connect an external keyboard, does it function?
Have you run The HP Support Assistant to help with updating drivers and resolving issues.
Has there been any recent changes to you system?
Did you upgrade to Windows 8 or 8.1?
Have you tried the Windows troubleshooter?
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP Mini 110 battery on 2133 Mini-Note

Similar Messages

Maybe you are looking for