HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!

HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
[edited Serial Number by Moderator]
plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..

Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th  and  7th letter lowercase Q.  Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

Similar Messages

  • HP MINI 110 FATAL ERROR SYSTEM HALTED

    Hi, I have a HP MINI 110 and I forgot the password for bios.
    After three unsuccessful attempts on the screen appears:   FATAL ERROR SYSTEM HALTED CNU9459FB0
     s/n(Personal information removed by Moderator)  - p/n: VJ205EA#UUZ 
    Thank you
    Text translated with google
    This question was solved.
    View Solution.

    Hi,
    Enter:     e9lovqo8p1     ( 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp Compaq Mini 700-Fatal Error System Halted CNU9122NHV

    Hi I us in my computer Linux Mint i think so but now i start my computer and get this message..
    Fatal Error System Halted CNU9122NHV.
    I am not so good in english are from Sweden..And i hope someone can help me..
    Thank you!!

    CNU9122NHV IS THE CODE FATAL ERROR. I am not from USA Or London..I can read and write better in Swedish my english is ok not to good! I hope someone here give rigth code to my computer...

  • Password check failed fatal error system halted CNU9384PJY

    BOOTING ENTER CURRENT PASSWORD THREE TIMES GOES TO PASSWORD CHECK FAILED FATAL ERROR SYSTEM HALTEDCNU9384PJY AFTER NETBOOK SET UP FOR A WHILE THANKS FOR ANY HELP

     Enter:    e9lofuv2wi     ( 3rd character is a llower case L ) Regards, DP-K

  • Password Check Failed, Fatal Error, System Halted, CNU949701P

    Hello!
    I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
    I recently went to turn it on to recover some important documents and this error message shows up;
    Password check failed
    Fatal Error... System Halted
    CNU949701P
    Canu anyone PLEASE HELP ME! I would be so grateful!
    Thank you!
    x
    This question was solved.
    View Solution.

    Try >> e9lovox132
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HELP! Fatal error system halted CNU00974PL in compaq mini CQ10

    The Bios is not working, it only shows that I need a password! but i don't have any.. someone, please help me!!

    Please try this password:  e9l11oxv2k Steps to be followed after you reset the password:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting Steps:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,KNRKAlthough I am an HP employee, I am speaking for myself and not for HP

  • Re: hp mini fatal error system halted. CNU9363XZL NEED PASSWORD HELP????

    Thanks you for help!! Godbless.....
    This question was solved.
    View Solution.

    Hi,
    Try entering:    e9lofgf40k      ( Note that in both cases, the 3rd character is a lower case L and the 9th is Zero )
                                          or
                                  e9lofgfr0k
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp mini 110 fatal error passcode

    My s/n is CNU0074LL6 and i need the passcode it wont let me on it without it. Please help it will be greatly appreciated!!
    This question was solved.
    View Solution.

    Hi,
    Please try (lower case)
         e9l11xvkkg
    or try 3 times and post the error code back
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp mini 110 fatal error CNU902222G

    When i try to enter my bios, i am asked for a password, which i didnt put on there myself. The code it gives me is CNU902222G and i cant find anything on that code. How can I bypass it and fix the issue.
    This question was solved.
    View Solution.

    Please try this Password = e9lo17777h
    Steps to be followed:
    1. Use the unlock code posted above to enter the BIOS
    2. Disable all passwords that are enabled
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.
    6. Then leave the BIOS by saving & exit option to save the changes.
    Troubleshooting:
    Incase if the Password doesn’t work please try a Hard Reset as follows.
    1. Shut down the notebook
    2. Unplug the AC Adapter and then remove the battery
    3. Hold  down the Power button for 30 seconds
    4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
    5. If you now see a password box, Please type the same Password I shared before and press enter
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Compaq mini 700 enter current password fatal error system hatled

    Compaq mini 700 laptop fatal error system halted. 
    CNU9192NQN
    Can you help me plz ? 
    This question was solved.
    View Solution.

    Hi
    Try this : e9lo3o7959
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Hp mini 110-1126NR error fatal

    porfavor ayuda mi pc hp mini 110-1126NR no arranca me pide un passwerd no se q hacer m sale error fatal sistem halted

    Hi,
    Please try (all lower cases)
        e9lo7vgb7v  (3rd char is a lower case of L)
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Getting Fatal error system Haulted........Message code CNU9318J82

    When I turn on my Laptop that I bought from a pawn shop, I get an error message below...
    Password check failed.
    Fatal Error.....System Halted.
    CNU9318J82
    This question was solved.
    View Solution.

    Hi:
    Reboot and enter the code:
    e9lof3uwu7

  • Hardware error system Halted

    Bought 30 computers with Windows 7 to replace XP machines. Made the initial install of all the software needed and assigned static ip addresses and to make sure I didn't have any DOA machines.
    When reattaching a client computer to the network the server 2008 r2 domain controller, has a hardware fault and halts.
    I'm trying to figure out what would cause that to happen. I'm already pulled it and going to re-install windows 7 on it. I'm just want to know what is causing it.
    Anyone with an idea why?
    Thx,
    Bill

    Thanks for the reply.
    The 7 computer itself isn't freezing. It causes the server to blue screen, "Hardware fault" "System Halted". It happens every time it is turned on while connected to the network.
    It has a static IP address. I moved it to another office to test the wiring and it halted the server from that office too. This machine was connected before when I initially set it up with name, IP address and the default software we use and make to make
    sure it wasn't DOA.
    Needless to say I've taken this machine out of service. I'm going to reinstall Win7 on it and then try it again.
    Any other ideas?
    Bill

  • Hp mini laptop fatal error code

    I keep getting fatal error code CNU9277JZ I don't know the password and can't get in it and my mother doesn't remember it.

    Hi,
    Please try (all lower cases):
        e9lo7xxw07 (the 3rd char is lower case of L and 9th char is a zero).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Mini 110 password error CNU9516LST

    Need Help with the BIOS Password
    <script id="overlay_tmpl" type="text/html">//<div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> //</script><script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>

    Try the following:
    e9loq3gkna
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • How to configure SQL*Net to survive minor dropouts?

    Hi, We have recently started developing over a VPN to our server. The VPN is not brilliant and we get minor dropouts for a second or so. This is causing SQL*Net to dropout and we need to re-connect and re-start all our Apps (SQL*Plus, Forms Builder,

  • Backup Problem in both offline+redo and online+redo

    Dear Experts, When i am taking online+redolog backup to my tape i am getting the error. BR0203I to /dev/rmt0.1 ... BR0278E Command output of 'LANG=C dd obs=64k bs=64k if=/oracle/XP3/sapdata1/sr3_1/sr3.data1 of=/dev/rmt0.1': dd: /oracle/XP3/sapdata1/s

  • Error message when try to access instruments in the library

    xs24 instrument insert name of instrument.exs audio file insert file name.aif not found. This message is coming up with a fair number of instruments, and i was wondering how to remedy it. Thanks

  • Printing PDF document

    Hi. Who knows how to send to printer PDF document???

  • Updating XML file

    Hi all, I have this idea of running a program that accepts user's input and replacing some parameters in the xml file. For e.g. The XML file have this tag <database username=@username@ password=@password@> The program would get the user's input and r