HP Mini 110 - No audio after replacing hard drive and installing XP

My wife's Mini 110 recently died and I had to replace the hard drive.  I got everything up and running fine except for the audio.  The driver on the HP site for the 110 will not install as it says that there is no device installed for that driver.  In the Hardware list, there is a PCI Device with a question mark and I cannot get it to find a driver.  Even after installing the chipset driver and flashing the bios there is not audio device working.
Can anyone out there help?  I'd really appreciate it!
This question was solved.
View Solution.

Try and install audio driver from here and check... ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44799.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

    How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

    You can download the trial installer directly. Find the appropriate link below.
    You must be on a trial download page to use the links, otherwise you get an error message.
    For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    before pasting the link into the address bar.
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
    You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

  • My iMovie 9 will not install after formatting hard drive and installing Mavericks what are my options?

    I have not used my iMovie ever since I formatted my Hard Drive and installed Mavericks. I went to put the disk in from when ilife was originally shipped with the computer and it just spits the disk right back out of the superdrive. Is there anything I can do to not have it just spit a disk out without asking for user input. Any help would be greatly appreciated, I don't want to buy the new version.

    Here are the original specs of your computer. The specs state that the original hard drive was 320GB. You have since replaced the factory drive with a 1TB (1000GB) hard drive. The HP recovery routine seems to have issues with hard drives that deviate from the original size. The partition issues you are experiencing may be a result of this. As for the rest of your issues, it sounds like the SP3 install went bad.
    If I were you, I would consider reinstalling the OS using your recovery discs by doing a complete "destructive" reinstall/recovery. Afterward, I would post the size of both the c: and d: partitions... and go from there.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • IMac won't boot after replacing hard drive and restoring from Time Machine

    I was having problems with my iMac but upgraded to Lion when it came out. Had a few good days and then my hard drive died.
    I had the drive replaced and the repair people put Snow Leopard on the new drive.
    I then tried to restore everything from my Time Machine backup. At first when I tried to log on the computer wouldn't accept my password (i know it was right).
    I decided to reinstall again using the snow leopard dvd i had. This time, the computer booted up (didn't ask me for a passord) and looked like it was in the process of setting things up. But Mail kept saying it was going to import messages but then quit and restarted a few seconds later. When i quit it it just came back again and again. I could see Chrome open behind it with my bookmarks in the toolbar and see other restored things, but the overall look was grey and not everything was there.
    When i restarted from the HD and not the dvd i could never get past various shades of grey and the circling progress indicator. Never booted up at all.
    I read about Lion having some restore hd functionality but it doesn't show up when i restart with option key. Am I in limbo between operating systems?
    Any advice as to steps to take? I don't know much about this stuff.
    Thanks for any help.

    Yes, if you picked a Snow Leopard backup, that's what you got. 
    You could pick a Lion backup, and it would restore it, but that wouldn't create the Recovery HD, which you will need, sooner or later.  See Using the Recovery HD.  You'll need to re-download Lion for that to be created.
    When you do that, after downloading but before installing Lion again, you might want to do this: Making a Lion Install disc or partition.  Then if you need to reinstall Lion again, you can do it from that, instead of having to download it again.

  • Replacing H/Drive and installing OS 10.5.6

    I'm planing to replace Hard drive and install Leopard 10.5.6, in same time.
    Is anybody has good tips for me on this project?
    My victim is; iMac G5 (iSight), 2.5 GB of Memory 2.1GHz 20-inch, S#; W8551*TAR, M#; ML064LL/A.
    New H/Drive; Western Digital Caviar Blue 640GB, M#; WD6400AAKS-00A7B2.
    New Mac OS X 10.5.6 Leopard Retail-Int.
    My fingers are etching to peel this mac a part. In this point fill to ask for advice, then describe color of smoke coming out of my mac and what it means.
    Oh, one think, i never took a part this iMac.
    I did replaced some parts on PC's.
    <Serial Number Edited by Host>

    ou can sind instructions [here|http://www.jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php], just b careful and be gentle, taking the screen off is a delicate job.
    Let us know how you make out,]

  • MacBook Pro does not boot past apple screen after replacing hard drive

    After replacing hard drive on MacBook Pro 13 inch early 2011 model, the screen only boots to the apple logo.  Do I need to re-install the OS?

    The problem is that the OS is not in any where else of the MacBook Pro than in the HD / SSD. If you replace the Hard Drive, then you will need to Re-install OSX into that hard drive, it's pretty easy.
    1) Power up your Macbook Pro, as fast as you can press and hold the Option key (ALT). You'll see that it opens the bootable-devices you have, you'll see a Recovery partition, click it.
    (If the Hard Drive contains data do the following)
    2) In the menu select Disk Utility.
    3) In Disk Utility go ahead and select the Hard Drive that is inside the MBP.
    4) Erase the content.
    (If the Hard Drive contains no data continue with the following jumping the last 3 steps).
    5) Select Re-install OSX.
    6) Select the Hard Drive in which you want to install it.
    Follow the steps of everything else (it should take approximately 1 hour to do the whole thing).
    Hope this helps!
    Later.

  • Hello, My computer crashed, I removed the hard drive and installed it into a hard drive enclosure and now I am trying to get my Thunderbird data off of it

    Hello,
    Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
    Thanks,
    AN

    lets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
    You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows.

  • Can I restore from Time Machine backup after replacing hard drive

    I'm planning on replacing the 250GB hard drive in my mid 2010 13 inch MBP with a larger one. My MBP comes with Snow Leopard, and I've installed Lion and recently Mountain Lion from App Store. Can I use my Snow Leopard disc to boot up the laptop after replacing the hard drive, and restore Mountain Lion and everything else from the latest backup in Time Machine without having to install Snow Leopard?

    Welcome to Apple Support Communities
    Press Command and R keys while your Mac is starting and restore your backup. You shouldn't use 10.6 to restore the Mountain Lion backup

  • HT201250 How to restore laptop from time capsule after replacing hard drive

    How do I reload all my programs and files from a time capsule after changing hard drive?  Also Apple store reloaded with Snow Leopard and not Lion.  Will that be a problem?  Thank you

    Plug the external drive into a computer by usb or whatever box you have available..
    When you say blank, is it correctly formatted.. we recommend HFS+ which is Mac OS Extended (jorrnaled)
    Make sure you use GUID type disk setup not MBR if it came from PC world.
    Copy the files via finder from TC to the external drive.

  • Recovering iWeb Files after replacing hard drive

    I had 5 functioning websites on iWeb. In April this year I replaced the hard drive on my Mac. I definitely backed up everything onto a new external hard drive, but I can't find my websites on this hard drive and can't work out how to recover them. They are all still live however. Any help would be much appreciated, but please bear in mind I'm not really up on the tech talk, so if you could dumb it all down that would be great!
    Thanks very much!

    You need the 'Domain' file which by default lives in (user)/Library/Application Support/iWeb (note that this is not the Library at root level and may be hidden - see below*).
    iWeb cannot import the HTML pages which are online, so if you are unable to retrieve the Domain file in which it keeps its data all you can do is to recreate the site from scratch, using the online pages for reference and as a source for the text and images.
    If you have to do this you may want to consider not using iWeb, which is no longer supported and may well stop working with any upcoming system upgrade. Everweb is designed to be very like, and to improve on, iWeb and is well liked.
    *Apple have hidden the user’s Library folder in Lion and above to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice. In Mavericks you can make it permanently visible - open your Home Folder the from the Finder's View menu, choose show View Options and check Show User Library.

  • How to replace hard drive and transfer everything over?

    I've looked everywhere but am unable to find a definitive guide on how to do this.
    Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
    The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
    Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Mac Mini Help Please!!! - Hard Drive and Time Machine

    Hello everyone,
    I return once more seeking your support if I may...
    I went down to the Genius Bar today, as my Mac Mini was having the multi-colour circle not-responding icon showing an awful lot, and it was struggling to perform simple tasks.
    I bought my mac mini 2 years ago (12-Mar-11), and I was told there was an I/O error; and i needed a new hard drive.
    I am currently backing up my machine, onto a WD My Passport 500gb.
    When a new hard drive is installed by Apple, can I restore my files with my 'My Passport' backup?
    I do also store other items on 'My Passport'; does this make a difference when trying to restore my files to my new hard drive?
    One more question if I may...
    Has anyone here had a new hard drive installed by Apple before, and if so, has the hard drive 'stood the test of time'
    Many thanks in advance for your help
    James

    What utility are you using to backup your drive?
    Apple buys hard drives from major manufacturers like Toshiba, Samsung, Seagate, and Western Digital. The drives will last as long as any drive you would purchase from them. Some last long and some don't.
    Suffice to say the drives carry a specific warranty. That should give you an idea how long the manufacturer thinks it will last on average.
    You can restore files from your backup pretty easily in Mountain Lion. If you are using Time Machine then you can actually boot from a Recovery HD image that it places on your backup drive. To boot from it you must connect the backup drive, then restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD and then click on arrow button beneath the icon.

  • G5 Tower, replaced hard drive and now can not get it to work- HELP

    My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
    The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
    I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

    Did you reset your PRAM?
    command-option- p-r
    Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
    If it works be sure to check your date and time settings (the system will tell you)
    You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
    Hopefully that will take care of the problem.

  • Replacing Hard Driver and RAM

    Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

    Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
    See this knowledge base article for your migration question.
    http://support.apple.com/kb/HT1177
    Hope this helps
    Message was edited by: leroydouglas

  • Music on hard drive, replaced hard drive and now library won't match up

    I put all my cd's on a hard drive (9000 or so songs) and had a hard drive failure, so I moved all the songs to a new hard drive and now I can't use the Itunes library to connect with that hard drive, except one song at at a time.
    Is there any way to get these two to communicate?
    David

    Is the rest of your music located in a different folder? You'd need to know where those files are in order to add them to iTunes. If you're not sure of their location, try a Spotlight search. Are you not able to locate the files to add them to iTunes, or are you selecting them but they are not appearing in the iTunes library?
    I have all the actual music files located on a external hard drive, but the itunes file name(s) are located on the computer. The problem started when I got a new computer and switched all the stuff over, and then got a new hard drive because the old one was making noises. I copied one hard drive directly over to the other and now am trying to connect the two so they talk together.
    The fix you sent me semed to work great until I noticed that I did not have any music after the letter "a" (namely 1/36 of the music). I ried it again with another copy I had and lost that too. Now, I am working with the copy I had on the other computer, which doesn't have all the data, but does have most of it, and I can survive adding the other stuff later somehow by re-copying the music and getting the data over again, but I do want to somehow get the other 35 letters worth, if possible.
    David Molony

Maybe you are looking for