Hp mini 110 RAM

im thinking of upgrading the ram on my hp mini 110-3601 sa but it got a choice of 2 the first one is : 2GB, 1600MHz, 240-pin, PC3-12800, shared DDR3 SDRAM Small Outline Dual In-Line Memory Module (SODIMM) andthe second one is: 2GB 1600Mhz PC3-12800 memory module (SHARED) i want toknow whats the diference between them and which one is better as im running w7 home premium can anyone help?
This question was solved.
View Solution.

Hi,
For RAM we need the machine is going to work, doesn't matter more expensive or faster. Please get the proper specs using the following scan:
   http://www.crucial.com/systemscanner/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Mini 110-3150CA - RAM Upgrade?

    I just picked up a HP Mini 110-3150CA - I have 1gb Ram - But I would like to upgrade to 2GB ram -- can this be done? And what type of Ram do I buy?

    Here is the Manual.
    Manual
    Instructions for upgrading memory are on page 51.
    It uses DDR2 laptop memory 667 mhz which is commonly available even at a store like Best Buy. It only has one module so you have to replace the 1 gig module in it with a 2 gig module. You will be glad you did. It will run much better on 2 gigs.

  • HP Mini 110-3616 RAM Upgrade

    My Father in law is looking to buy a HP Mini 110-3616, they come with 1GB RAM (and Windows 7 Starter), I haven't ssen one of these, is it easy to increase the RAM, will it make it a lot faster?
    Thanks
    Steve

    Here is your spec. sheet again and it says that you are running a 32 bit OS, so the max that you are going to use is 2 to GB.
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02780828&tmp_task=prodinfoCategory&lc=en&dlc=en...
     A 4 gig stick will probably work in there, but the BIOS may not see it and as Paul suggested, try to get one from a friend to test it out.
     As for the HP compatibility listing, I think it's wrong, HP has printed the wrong information before.
     Run this scanner from Crucial and it will tell you how much memory for sure it will handle.
     http://www.crucial.com/systemscanner/
     Is that 71 £ for the 2 GB stick, if it is, that's an outrageous price.   Shop around a little more, a 2 GB DDR3 stick at 1333 MHz is common as dirt and should be around 20 to 30 dollars US. I am sure you could find something on e-bay.co.uk that will work fine at a fraction of the cost.
     Forget e-bay, just get it direct from Crucial.
     http://www.crucial.com/uk/store/listparts.aspx?model=HP%20Mini%20110-3105sa&Cat=RAM
     It's still expensive, but better then HP's price.

  • Hp mini 110-1100 ram

    I was wondering if the ram can be expanded to 2 gigs

    Hi,
    Yes you can. Your machine has only one slot therefore you have to throw away the existing 1Gb piece and buy a new 2Gb piece of RAM. You can buy from the following link or use this info to buy elsewhere:
      http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+Mini/HP+Mini+110-1100-upgrades.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to upgrade RAM on the HP Mini 110-313?

    It says the HP Mini 110's are user-upgradable RAM to 2gig.
    How would I do this?

    There should be a little door on the bottom of the machine where the memory chip is. Just order the memory and pop the old one out and put the new one in.
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • 2 GB Memory upgrade for HP Mini 110-3025tu

    I recently bought this laptop HP MINI 110-3025tu
    Specs
    -atom n475
    -1gb DDR2
    My problem/our problem is this.
    When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
    then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
    Please tell me if i can do something to fix this problem
    Much thanks!
    Joe

    Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Compaq Mini 110 won't start after cleaning Think Point virus

    Hi
    I'm helping my daughter with the following problem with her Compaq mini 110.
    After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
    Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
    Thanks,
    Per
    FACTS:
    Computer model: Compaq Mini 110c-1100SO
    OS is Windows XP as supplied with the computer and was never changed.
    Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
    RAM diagnostics in BIOS setup performed without error reports (1 GB)
    Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
    I have set the delay for the user to press F10 to 5 seconds.
    The display/screen works properly during BIOS setup
    Power adaptor connected, and charging LED lights constantly (as I expect it to do)
    Power on LED lights constantly
    Wireless network LED lights constantly
    Caps lock LED flashes briefly at start up, then gets dark.
    When booting stops, background light on display is on, no text or symbols are shown at this state.
    BIOS password has never been activated
    BIOS Administrator Password has never been activated
    Internal Network Adapter Boot never enabled

    Hi,
    On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk.  Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
    http://www.techmixer.com/kaspersky-rescue-disk-loa​d-kaspersky-antivirus-2009-using-dos/
    Let me know how you get on.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP mini 110- 3500 laptop fails to boot after SSD upgrade

    Hello,
    I recently bought a "crucial 250gb 2.5 " SSD and 2gb RAM (also by crucial), to upgrade my HP mini 110-3500 laptop, which was exceedingly slow. But unfortunately, the laptop has refused to boot when powered on. What can I do? I am very worried.
    Enkay1

    You answered. That is what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will run at the higher voltage (1.5 volts) but it is just not the ideal memory for the older hardware. You need DDR3-1333 memory as HP specified for the laptop. You can confirm or refute my diagnosis by putting in the old memory and see if she boots.  This is the part mumber you need: 621567-001 http://www.ebay.com/itm/2GB-COMPAT-TO-621567-001-A3803335-A4100445-A4427375-/230655741975?pt=LH_DefaultDomain_0&hash=item35b4275017  Does your memory have 8 black blocks on the side or just 4? You want 8. Also if you have Windows 7 Starter you cannot use 2 gigs of RAM. If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • HP Mini 110-3000 is anything upgradable ?

    Hello HP experts, I need some help. Can I somehow upgrade my video card or RAM on my HP Mini 110-3000 ? Im looking forward to have a good gaming experience so that I dont have to buy any expensives laptop.

    I'm not going to say that you can't upgrade your graphics card. but I would guess that if you had the tools and skill needed to sodder a new graphics chip into this system you wouldn't be here. so short answer for video upgrade, no. not going to happen on a notebook, let alone a mini. 
    but you can upgrade you RAM.. 
    check this out for the dirty details 
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00820047&tmp_task=useCategory&cc=us&dlc=en&jump​...
    you want to play games on this? are we talking minesweeper? maybe the HP image of the device doesn't do it justice but it looks tiny.. more like a netbook. these things just aren't made to crank out the big games. 
    This country, with its institutions, belongs to the people who inhabit it. Whenever they shall grow weary of the existing government, they can exercise their constitutional right of amending it, or exercise their revolutionary right to overthrow it.
    Abraham Lincoln

  • Mini 110 Bios Password

    i have a Hp mini 110 & I need a bios password My code is:CNU9252M4K
    Hi Friend.
    This question was solved.
    View Solution.

    First thing I need to know from the forums Admin. or a Moderator that I can give out master passwords on this forum???
    I do not want to be blacklisted for doing so.
    Would a PM be acceptable???
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Damaged touch pad ribbon cable on HP mini 110 4100ea, replacment wanted

    Hi
    I recently let a friend try do up grade the ram on my HP Mini 110 4100ea but in the process he damaged one of the ribbon cables on the curcit board strip contaning the touch pad buttons specifically the one conecting it to the motherboard rendering the touch pad inoperative.
    I Have tried looking on the internet and ebay for a replacment part without any luck, does any one on this forum know where I could get one?
    I live in the UK and would prefer to get any part from the UK but would be ok to get from abroad.
    My computer is a HP MINI 110 4100ea
    Product Number: A9E58EA#ABU
    Serial Number: [Personal Information Removed]
    Many thanks for your time.

    hi
    you need to look for technical assistance with the information below:
    Top cover
    NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.
    Description Spare part number
    In gloss black finish 663677-001
    In Pacific blue finish 658515-001
    In Sonoma red finish 658513-001
    I work for HP. Click the white star in the purple rectangle KUDOS to the left of the post to thank good answers and say thank you. If the answer was helpful or clarified and solved the problem please mark the topic as solved. So, you also help other users.

  • [HELP] PROBLEM WITH KEYBOARD HP MINI 110 - 1017TU

    I have HP MINI 110-1017TU.
    warranty expired since 2 years ago.
    my problem is, while i'm type letter
    "p" its show "p0" or "0" its show "0p"
    "q" its show "q1" or "1" its show "1q
    its happen when i pressed
    w,e,r,u,i,o
    i try replace the keyboard with the new one, but it doesn't work
    if i use usb keyboard it working normally.
    i try to take off the batt and plug it again
    now the second problem appears with my password bios
    password check failed
    fatal error system halted
    CNU93330P9
    any solution for this 2 kinds of problem.
    many thank's for help
    note:
    i'm from indonesia, apologize for my bad engslih.

    Dinasty.
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    When asked for the CURRENT password use that code.
    When asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    REO
     I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Mini 110 3000

    anyone know how to access the ram sodimm in a hp mini 110 3000 netbook? No ram door on the bottom of the machine.

    I found the solution after much research, so I want to put it here in case anyone else finds this thread via google.  The problem was the HP Support Assistant software.  I got suspicious when it did some updates yesterday and took almost 2 hours to complete four simple driver updates.  As an experiment I uninstalled it and instantly performance fell within normal levels.  As I write this my CPU is fluctuating between 2 and 12%, and even running games now through DOXBOX or STEAM my CPU doesn't get over 65% or so.
    HP, fix your broken software or don't put it on your machines!

  • Hp mini 110 parts needed

    Is it possible for me to still buy a cheap official battery for my HP mini 110 because its battery right now only charges to 5 Percent and then dies after 10 min

    Dany try here.
    http://www.ebay.com/itm/Original-HP-Compaq-Mini-11​0c-1100-110c-1100DX-110c-1105DX-Battery-BX03-/2214​...
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP Mini 110 BIOS Passowrd

    Hello,
    I dont remmember the passowrd. Can anyone tell me what the default password is?
    I have a...
    HP MIni 110 S/N-CNU9445CWK P/N VF704AV
    I'd also like to know if anyone has tried to install Win 7.
    Thanks,

    Corona welcome.
    Try.
    e 9 l o v v q e d s
    Third letter lowercase L.
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

Maybe you are looking for

  • Importing Holidays into iCal 4.0.3?

    How do I import U.S. holidays into iCal 4.0.3? I can't seem to find this anywhere, not even in iCal support and this is very standard with calendaring software.

  • ABAP server proxy-External Debugging

    I have a server ABAP proxy implementation in a R/3 where i m sending message from XI, I want to debug the the ABAP Proxy using External debugging (http breakpoint), Pls tell me if it is mandatory to: 1. login in R/3 (for debugging) using the same use

  • Maintain local in-house jar files while java plug-in is upgraded

    I have some in-house developed jar files which are kept at C:\Program Files\Java\jre_xxx\lib\applet. However, starting from Jre 1.4.2, there is an "autoupdate" feature which allows auto-download and installation of newer version of JRE to the client

  • How Do I Get This Patch To Work?

    I'm struggling to get my iDVD 5 to be able to work on DVD projects over the 4.75 GB (2 hour) limit. I'm using an eMac G4 w/a LaCie external dual layer DVD burner on OS X 10.3.9. All the research I've done so far has led to this French patch at: http:

  • Plan cost & Actual cost in KKBC_ORD for CO Prdn Order

    Dear Experts, We are not able to findout the why difference is appearing during T code KKBC_ORD order analyse for Raw materials, please suggest wht may be the wrong thing in the order? Before this i would like to brief you on the process. Raw matls a