HP Mini 110 with new SDD. Restore Fail to copy

Hello,
 My original HDD died, and so I purchased a new SDD, and the HP restore discs, Using an external CDROM I have begun the restore process. During the copying files required to restore the hard drive I get an error message that reads;
Copy File Fails
From: D:\PRELOAD\BASE.WIM
To: C\RM\Image\BASE.WIM
Press OK to Retry.
I have retried, I have tried a second restore disk, I have tried the other two discs. Any ideas??

Apparently 80Gig too small to copy files. loading on 120gig, then will clone C drive.

Similar Messages

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • Restore iphone would lose my data with new itune, restore iphone would lose my data with new itune

    I was updating spring somthing App then the phone froze on apple logo screen tried to turn it off it's not responding ... tried to restart it by holding the home button with the top button . the screen go black then the apple logo come again it been like that for 8 hours .. some messeges says that i should restore it from i tune but I have a new laptop now because my last one fried the motherboard can i restore it with new just downloaded i tune????

    Follow this: https://discussions.apple.com/docs/DOC-3141

  • Mayor Problems with new installation / restoring from time machine

    I encountered several problems while setting up my mac mini, 1,66 Ghz, 60 GB from the start. The following problems occured:
    1.) Installing 10.6 upon existing 10.6.4 caused scanner driver to fail. I was unable to reinstall it, so i decided to reinstall 10.6. from the start
    2.) clean install of 10.6., after finishing i could not install iWorks. There was an error like "com.apple.installer.pagecontroller" ant installation terminated. With MS Office 2004 I had a problem, too: An error with _ds.store occured, I could not even copy the files to my harddisk. I thought, it might be the optical drive, so i took an external one which caused the same problems. I proceeded to 10.6.4 by update, but that did not make it better.
    3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
    4.) tried to repair rights hat no effect. The harddisk is reportet to be functional.
    5.) Back to the roots, i thought, installing 10.4. which came on the grey disks with the mini. I encountered the same problems after installing, furthermore, on trying to install flash 10.1 it could not open the .dmg-file.
    6.) Installed Win XP. All seems funktional.
    So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.

    MathiasLeopold wrote:
    3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
    Did you use a Leopard Install disc to restore a Snow Leopard backup? If so, that's the problem. You must use a Snow Leopard Install disc to restore a Snow Leopard backup.
    If you did use the right disc, were you restoring backups from the same Mac?
    If so, were you having problems before all this started? If you were, it's possible those problems corrupted your installation of OSX, and that was copied to the backups.
    So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.
    Try running this: Intel-based Macs: Using Apple Hardware Test

  • Mini boots with new cloned drive externally, but not internally.

    Hi.
    I bought a new, bigger and faster HD for my early 2009 Mac mini (10.8.2) and cloned my original drive with Carbon Copy Cloner, making sure to include the hidden recovery partition. Using a USB to SATA adapter, I can boot from the new drive no problem. However, when I open up the mini and replace the old drive with the new one, all I get is the folder with question mark that blinks. I've tried holding down option when rebooting to get to the recovery partition, but all I get is the WiFi log in, no drives or any other options to choose from. If my Time Machine drive is connected, that does appear but fails to do anything if I click on it. (When the old drive is in, I can access the new drive just fine, and can even boot into the new drive's recovery mode.) Is there some step I'm missing, or some troubleshooting I can do that I'm not aware of?
    Thanks.

    RRFS wrote:
    It sounds as though the connector for your drive didn't get seated properly.
    If by that you mean it wasn't secure inside the computer, you could be right, but I pulled the drive in and out three separate times as I opened and closed the machine to exchange the old and new drives a few times and always tried to make sure it was nice and snug in there.
    Thanks for the response.

  • Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?

    Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?

    Mac Pro - Mid 2010
    Processor  2 x 2.66 GHz 6-Core Intel Xeon
    Memory  8 GB 1333 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5870 1024 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    This is a brand new machine that I just purchased from Apple. It was delivered yesterday
    The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
    I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
    Same issue - nothing but a grey screen when the system tries to boot from the DVD

  • Mirroring Mac Mini HD with new LaCie HD

    This may not be the right forum, but I'm trying to use RAID to mirror my HD with a new LaCie HD I purchased. The connection is via Firewire, so I'm thinking this may be the reason I can't seem to set RAID up for this. Apple support couldn't help either. Does anyone know how I can do this?

    Hey miniman,
    Since the hard drive located in the mini is different than what Lacie uses, chances are even if you tried to RAID the two and actually succeed, it wouldnt be too safe of a move to pull.
    Your best bet is to look into "rsync" or "ditto" which are OS based backup options via command line. There's a lot of documentation online that's pretty straight forward on how to set it up. Also, using "cron", you can set it up to back up hourly, daily, etc...

  • Time Machine restore failing with error code -43

    I have an external hard drive with a 1tb partition that I use for my time machine backups. I am trying to restore my system and I repeatedly get "an error occurred while restoring from the backup time machine...restart"
    I tried on several different backups, ranging from a few hours, a few days and a few months. All of them fail with exit code -43. Here is a sample log:
    Aug 15 03:21:54 heavenmac OSInstaller[384]: [RESTORE] failed to copy file '/Volumes/Macintosh HD/Users', critical, failing.
    Aug 15 03:22:04 heavenmac OSInstaller[384]: LSExceptions [0x7fce9c6ca9f0] unloaded
    Aug 15 03:22:10 heavenmac OSInstaller[384]: [RESTORE] copying /Volumes/TimeMachine/Backups.backupdb/HeavenMac/2014-08-10-114439/Macintosh HD/Users/.localized to /Volumes/Macintosh HD/Users
    Aug 15 03:22:10 heavenmac OSInstaller[384]: [RESTORE] failed to copy file '/Volumes/Macintosh HD/Users/.localized', critical, failing.
    Aug 15 03:22:10 heavenmac OSInstaller[384]: [RESTORE] Error enumerating directory: file:///Volumes/TimeMachine/Backups.backupdb/HeavenMac/2014-08-10-114439/Macint osh%20HD/Users/.localized
    Aug 15 03:22:10 heavenmac OSInstaller[384]: [RESTORE] _NodeOperation() failed with exit code -43.
    Aug 15 03:22:10 heavenmac OSInstaller[384]: [RESTORE] Restore operation was brought down successfully.
    I am desperately trying to restore my system. Any help would be greatly appreciated.

    A little search found this forum thread.
    http://discussions.apple.com/message.jspa?messageID=5976681
    It appears that Time Machine needs to have it's preferences reset. Apparently it's lost track of the drive you use for TM and probably set itself to use the new external drive you were working with.

  • Yoga 13 System Image Restore Fails Due To Excluded Disk

    Hello:
    I am trying to execute a restore from a system image disc created shortly after I installed my principal programs without destroying the OKR partition or files.  However, I  do not want to go all the way back to factory condition at this time.  The issue is that when I attempt to follow the reimage instructions in win 8.1, I am presented with a dialog box that has two check boxes.  The first asks "Format and repartition disk" and the second asks "only restore system drives".  
    Based on everything I've read about preserving the C:/ and D:/ drive partitions, I would have expected to check the second box and not the first.  But the system will not let me make this choice.  Instead, the first box is automatically checked, and greyed out, with a second dialogue asking me if there are any disks I want to exclude from repartitioning.  When following this second dialogue I am asked if I want to exclude Disk 0 (Samsung MZMTD128HAfV -00l1) which has 119Gb of capacity.  If I try to exclude this disk, the operation fails with following error:   "Restore failed because a disk that was critical at backup is excluded"  My question is, if I do not exclude this disk, will the restore operation still leave the D:/ partition intact so I can use OKR in the future.
    I have read quite a bit of imformation here and elsewhere about restoring system images and OKR, but have not seen any discussion about this disalogue, or the fact that I am being forced to reformat and repartition the disk without excluding the d:/ drive.  Other posters have stated that retsoringa  system image will only restore C;? drive, but this dialogue seems to conflict with those statements.  Anyone else have any experience with this operation?
    Thank you,

    Hello:
    I am trying to execute a restore from a system image disc created shortly after I installed my principal programs without destroying the OKR partition or files.  However, I  do not want to go all the way back to factory condition at this time.  The issue is that when I attempt to follow the reimage instructions in win 8.1, I am presented with a dialog box that has two check boxes.  The first asks "Format and repartition disk" and the second asks "only restore system drives".  
    Based on everything I've read about preserving the C:/ and D:/ drive partitions, I would have expected to check the second box and not the first.  But the system will not let me make this choice.  Instead, the first box is automatically checked, and greyed out, with a second dialogue asking me if there are any disks I want to exclude from repartitioning.  When following this second dialogue I am asked if I want to exclude Disk 0 (Samsung MZMTD128HAfV -00l1) which has 119Gb of capacity.  If I try to exclude this disk, the operation fails with following error:   "Restore failed because a disk that was critical at backup is excluded"  My question is, if I do not exclude this disk, will the restore operation still leave the D:/ partition intact so I can use OKR in the future.
    I have read quite a bit of imformation here and elsewhere about restoring system images and OKR, but have not seen any discussion about this disalogue, or the fact that I am being forced to reformat and repartition the disk without excluding the d:/ drive.  Other posters have stated that retsoringa  system image will only restore C;? drive, but this dialogue seems to conflict with those statements.  Anyone else have any experience with this operation?
    Thank you,

  • HP mini 110 operating system re-install

    I have a HP mini 110 netbook. It has lost its Windows XP, even though the HP operating system works. I hope I can download the full HP and Windows operating systems.
    This question was solved.
    View Solution.

    Hi,
    Please identify your HP mini 110 with its complete product name or product number. Look on the service tag on the bottom of the mini.
    Was Windows XP the original operating system?
    What do you mean by HP operating system? Are you perhaps referring to the BIOS splash screen that shows an HP image?
    I own an HP mini and use either a USB thumbdrive or a USB DVD drive to reinstall the operating system. The USB thumb drive install is much faster.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Resolve enter current password in my mh mini 110

    pls help me  to resolve my problem in my netbook.with product : hp mini 110/with s/n:cnu9245q94the problem of this is to enter current password

    You're welcome  All the best, DP-K

  • BIOS password reset for hp mini 110

    Hi,
    Please can someone help in resetting BIOS password for my hp mini 110 laptop. After 3 failed attempts, the following serial number is displayed :
    CNU9504B6H
    Many thanks in advance.
    -Roschki

    Hi,
    Please try:
      e9loq1vpgz (3rd char is a lower case of L).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have just installed itune again. now i sync problem of existing music will be replace with new itune which is empty. how can i keep my pervious files and sync new....

    i have just installed itune again. now when i sync it, it show me warning that all existing music will be replace with new itune which is empty. h
    ow can i keep my pervious files of music photos and other files and sync with new installed itune

    Use your backup copy of your computer to put everything back on the computer.

  • HT1386 when I first bought my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

    when I first got my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

    Have you copied your library over from your old computer : http://support.apple.com/kb/HT4527 ?
    There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

  • HT4157 All my texts on my iphone stopped working when I synced my new mini ipad with the same ID as my iphone. ATT said was that was the reasons my texts failed. How do I give my mini ipad a new apple ID and still be able to sync the iphone and iPad?

    My texts all failed when I synced my iphone 4S to my new mini ipad with cellular. ATT said I needed to create a separate ID for the mini ipad in order for texting to work. Will separate apple IDs still enable me to sync my iphone to my mini ipad?

    Go to Settings>Mail, etc.>iCloud and delete the account. Then add in a new account with the details you want.

Maybe you are looking for