HP Mini 210 - need Windows ISO after HD failure

Had a harddisk failure, so i dont have my recovery partition no more, microsoft said i had to talk to HP.
Is it possible to download the windows 7 starter iso??

HP restore discs are not available for a download online. Instead, you have to purchase the restore discs by contacting HP.
As your notebook is still under warranty, contact HP .
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
AntonyG1
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

Wiping hard drive on 2012 Mac Mini, but need install ISO

Hello everyone,
if I were to wipe out the hard drive on my Mac Mini (2.3ghz, i7 4g ram), how would i reinstall Mountain Lion, as there is no install disc? Would I need to pay to download it and then mount it to an external drive?
Thank you in advance for the help!

powerlaces wrote:
I assume that I can do this unlimted times as needed?
That's correct. Remember that you're downloading it. Some people have download thresholds with their ISP and there's a cost after they go over their limit. ML is approximately a 4GB download. If this isn't a concern, you're good to go.

Mac Mini late 2012 turns on after electrical failure

Hi. I bought a Mac Mini (late 2012 model) with OS X Mountain Lion in November 2013.
I upgraded to OS X Mavericks.
I have not changed any of my Mac's settings. They are all on default settings.
Under Energy Saver, only "Put hard disks to sleep when possible" and
"Wake for network access" are checked. Nothing else is checked.
Nothing is scheduled to turn on.
What happens is I always put my Mac to sleep when I'm not using it.
I have my Mac, speakers, cable modem and LCD monitor plugged
into an expensive name brand 500VA electromechanical voltage regulator
to prevent power spikes and surges from damaging my computer.
There are electrical blackouts a few times a month and this happens
when the Mac is either sleeping or being used.
The blackouts last about 30 to 45 minutes when they occur.
When the power comes back on, approximately 5 to 10 minutes later
the Mac Mini turns on by itself. I hear that familiar startup
sound from the speaker and then it boots until it reaches the login screen.
I'm confused why it would turn on by itself.
I use cable internet but my cable modem was unplugged at the time.
My internet connection is a wired ethernet connection using a Cisco 2100
cable modem.
Barring the paranormal, what would cause it to turn on by itself?
I'm not using a UPS.. just a voltage regulator (line conditioner).
Thanks for any help. I appreciate it.

Hi brody. I turned off printer and screen sharing.
I have a new problem related to sleep:
I put my Mac Mini to sleep using the menu and selecting "sleep".
Mac goes to sleep and you can see the LED on the front of the Mac
getting brighter and dimmer (as it always does when sleeping, no problem).
Problem was when I woke up 7 hours later the LED light was off, so
I thought there was another power failure but there wasn't because
my cable decoder box will switch from displaying the time to displaying
channel 1 if there's a power outage and power returns. However, it
still displayed the time so that meant there was no outage.
So, I figured it was not a power outage although we sometimes
get very brief (split-second) "brownouts" or blackouts.. they happen
so fast so I can't rule out that happening.
I tried pressing keys on the keyboard and clicking the middle button
of my Logitech mouse but no go.
Thinking the Mac had shut itself off, I briefly pushed the power button
on the back of the Mac.
Mac woke up with the login screen covered in a white haze with
|||||||||||||||||||||| at the bottom (like a progress bar).
That only lasted 15 seconds or so and finally the normal
login colors appeared and I could type my password.
So, the Mac was asleep but that behavior disturbed me.
1. Why did the LED turn off after being asleep for several hours?
2. Why couldn't I wake it from sleep using traditional methods (pushing a key/clicking middle mouse button)?
3. Why did the Mac wake up only by pushing the power button on the back?
4. What was the reason for the foggy white overlay that appeared when it woke up along
with a | | | | | | | | progress bar at the bottom of the screen for 15 seconds or so?
I ran an Apple Hardware Test by booting with the "D" key held down and it passed.
I also booted into Single User Mode and ran Memtest twice with no errors.
I really appreciate your help. My Mac is covered under AppleCare but I hope nothing
is wrong with it. I'd hate to be without my Mac even for a day. heh. :-)
Thanks.

Brightness doesn't work in Windows 7 on Mini 210 HD

Hi,
I've bought a Mini 210 HD a month or two ago, and i promptly removed XP to put Windows 7 Ultimate (32-bit) on it. This has worked more or less OK, but ever since upgrading i have been unable to use the brightness functions of the lap-top in any way. Not only can i not adjust the brightness with the hot keys, Windows will not dim the screen when i remove it from the mains or leave it to idle, and although i can move the brightness slider in the Power Options control panel, it has no effect. (Currently it is on the lowest setting in Windows, but the hardware is still on maximum brightness.)
I have re-installed the Intel chip-set drivers and the HP keyboard drivers a half-dozen times, these don't seem to be the problem. There is also nothing relevant listed in Windows Update, and there are no problem devices listed in Device Manager.
Is there anything i can do about this?
configuration:
HP Mini 210 HD
Windows 7 Ultimate (32-bit)
Intel GMA 3150 driver 8.14.10.1972
Microsoft x86 ACPI driver 6.1.7600.16385

Alrighty, Here ya go! I had this problem also. Got my HP mini 210HD and put Windows 7 on it right away. Brightness wouldn't change, function keys didn't work, brightness slider did nothing.
Solution:
Make sure you download the graphics drivers from HP's website, not Intel's. The brightness setting won't work with the Intel graphics drivers.
Get "Intel Mobile Graphics Driver for Microsoft Windows 7" from HP's website.
I have Windows 7 32bit, so I downloaded this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78614-1&lc=en&dlc=en&cc=us&...
This should work for you Ohkine.

Had forgotten administrator password on hp. Mini 210-1000 no reset disc

Hp mini 210-1000 windows 7 service pack 1 32 bit operating system windows activated. Workgroup. Product I'd . 00342-OEM-8992752-30008 loc I'd 1033

Please help, I only have a guest account that I can go into. I need to change settings but have forgotten administrator password and have no recovery disc or flash. Desperately seeking help

Disaster Recovery utility softpaq hp mini 210-1007sa

HP Mini 210-1007sa
Windows 7 starter
Laptop formatted due to not having disaster recovery utility softpaq, I need recovery CD or USB to start my mini laptop .
I'll appreciate for any help. Thank you

Hi,
Contact HP directly in your region and check if they still have it in their stocks:
http://support.hp.com/us-en/product/HP-Mini-210-1007SA-PC/4075896/model/4134408/document/bph07143
Contact HP:
https://support.hp.com/us-en/contact-hp/product/HP-Mini-210-1000-PC-series/4075896/model/4134408
Related: http://support.hp.com/us-en/product/HP-Mini-210-1007SA-PC/4075896/model/4134408/document/c02501173
If no joy, I've no other option for you unfortunately.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Install windows on my HP Mini 210-400, dont work because no driver?

Hello,
I tried to install a new Windows on my (titel) HP mini 210-4000, so if I start the installation and come to the Harddriver selection, pick a driver, windows said, that AHCI-driver are missing.
In the BIOS of this Netbook I can't change the Harddrivermode tho IDE, because I don't have this option......-.-
What have I to do now?

Try it again.
BTW..What is the complete product name and product number of your mini. At the end of what you posted there are characters missing. It helps us when we know the exact hardware configuration and we can get that from the product number.
This time use the installer to delete the existing partition create a new partition and format it as NTFS.
Download the Intel Rapid Storage software on another PC and extract the SATA AHCI drivers. You can use either Winrar or WinZip to do that. If you do this ,then you can install the AHCI drivers that you wanted to install before at the F6 install drivers stage of the installation. You will have to go into the registry and check a specific key later on after the install.
You may have to do this a couple of times til it works. Sometimes it takes practice. It is actually pretty simple to run a dual boot of Windows 7 (32-bit) and Linux (Ubuntu)
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Restore Windows 7 operating system on a new hard drive in HP Mini 210 1095NR

I have a HP Mini 210 1095NR that had its hard drive crash and is not recoverable. I have purchased a Seagate 320 gig hard drive to replace the original (160 gb I think) and I have ordered HP recovery disks. They came as a set of two disks. I used a free software (Daemon) to make ISO copies to two USB sticks one for each disk. However, in researching this further it appears that using a clean drive will not be compatible with the recovery disks sent by HP. There were mentions on the site that I visited, that I will need to purchase from HP some other media for a clean installation. Is that correct and/or can I format the hard drive myself and then use the recovery disks from HP?

you can format the harddisk first.
complete the installation of any os..
then keep your HP recovery disks and boot in..
now you can be capable of using recovery disks
Hope this helps
**Click the KUDOS star on the left to say 'Thanks'**
**---'Accept as Solution' ----**if it solves your problem and make it easier for other people to find solutions.

Need to Verify the Processor and Features on HP Mini 210-3000

Hi,
I recently bought an HP mini 210-3000 netbook directly from this HP website. According to what I read here, it's supposed to have GPS capability built into the processor, and come with HP Navigator software. I've looked everywhere on the netbook, and can't find the GPS or Navigator anywhere. I've spent literally hours on the phone and chat with HP, and the support hasn't been very helpful. For example, they ran a chkdsk scan on the netbook in one of the support sessions that I let them take control of the netbook. Chkdsk? What does that have to do with GPS? Perhaps someone can explain this.
Anyway, I need a way to independently verify whether or not these features actually are on my netbook, and, if they are, how to access and configure them. My order receipt say that the processor is an "Intel(R) Atom(TM) Processor N455 (1.66GHz, 512KB L2 + Intel(R) Graphics Media Accelerator 3150." This info is copied directly from my receipt.
So the way it's been left as of Tuesday aftenoon is that I was told that HP needs to do further research, and that I won't have an answer for one or two days. If they can't help me, I'm really stuck b/c I need the netbook to be working on Friday.
Can anyone help me query the netbook to find out if this is indeed processor I have, and then to find out if the GPS and Navigator are embedded?
Also, can someone help me verify that 210-3000 is a valid HP model number?. Most other listings for the 210 netbook that I have seen have letters after the 3000, like Mini 210-3000 XXX XX, and mine doesn't. I also don't find the model number 3000, but only model numbers like 300x or 30xx. The 3000 seems to indicate the series number, and not refer to a specific model number.
I do want to say that I'm not very technical, but my would appreciate any info anyone might be able to provide, even if it is technical. I'll do my best to sort it out.
I also want to say to anyone from HP who might be monitoring this forum, that I am very, very disappointed in the support I've received :-(, and I need to get this resolved by the weekend for a special project that I can't postpone. Can you assist me, or tell me where to go for assistance?
Can anyone help?
Regards,
Jaina

I cannot find specs for that specific model but did find this page, does not look like it has GPS,
http://h10010.www1.hp.com/wwpc/za/en/ho/WF06a/321957-321957-3329744-3832383-3832383-5082191.html
Look in Device Manager to see what hardware is listed.

Problem after ram update hp mini 210 1100

hp mini 210 1100, intel atom 475, win 7 starter 32 bit:
after upgrading to 2 giga ram computer does not work properly - win does not start or if starts freezes with black screen.
new memory stick is ok - works properly on another same computer.
when original 1 giga stick reinstalled computer functions well.
need help...
thanks

Hello yoyo5. I understand you're having trouble booting after installing new RAM.
What are the specifications of your new RAM? It is possible it is incompatible with the motherboard.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need Windows 8 ISO file

My hard drive is at the verge of failing me so I bought a new one and it seems I have an OEM version of Windows 8 that was pre-installed on my laptop.
I need the ISO file to install Windows 8 on my new HDD but can't seem to find a clean copy and don't want to use Torrent as it may contain malware, etc...
Does anyone know if Lenovo sends replacement disks in such cases? My laptop is only 1 year-old and I surely don't want to buy a new version of Windows 8.
Thank you,
Solved!
Go to Solution.

My Z40-70, purchased 2 weeks ago, did not give the option to backup to DVD-R, says can only use a 16GB Flashdrive for a recover drive. looked under the Maintenance folder, where the create a restore disc was suppose to be, and it's empty.
How much does Lenovo charge for a Win8.1 Recovery Disc(s)? Always like to have them on hand in case of a bad hard drive, more so for later on when the warranty is over.
Z40 Laptop • i7-4510U • 8GB RAM • 1TB Hybrid HDD • 14" FHD (16:9) • GeForce GT820M / 2GB • BGN WiFi • Win8.1 x64

HP Mini 210-2090NR malware and fatal error after update

Hi,
I have an HP Mini 210-2090NR with Win 7 starter. I had malware that kept trying to contact websites like adclick, etc. It tried an auto update and then got a one line "fatal error". Now it will boot to the quickweb but not the OS. I tapped ESC until I got a menu and tried F11 but the screen just goes completely blank. Is the recovery partition toast or is there another way to access it?
Thanks,
Matt

The error message- Replace hard Disk 1 is a clear indication that your hard drive has gone faulty on the Notebook and needs to be replaced.
I would strongly recommend you to back up your files if its possible and apart from replacing the hard drive with a new one, there is no other option to fix this issue on the Notebook
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

I can't, look at this image

HP Mini 210 - need Windows ISO after HD failure

Similar Messages

Maybe you are looking for