Hp mini 2140 bios

Hello 
I purchesed this HP mini 2140 from a school auction and the BIOS password was nate. So I got the notebook home changed the password and have no idea as to what I set it as. Can anyone please help me get past this?

Hi
If you have forgetten the Bios password the option to clear it to remove the CMOS \ RTC battery. If you are comfortable reseating it see the link given below you need to remove the battery & keep it out for atleast 15minutes. Check page Component replacement procedures 65.
Manual Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Hp 2140 bios pasvord

    merhaba 
    hp mini 2140 bios paswort 
    s.n CNU9164B34
    PLACE

    I  have the same issue tryed removing cmos battery but it only clears the date and time. I tryed to enter BIOS and it asks for Setup Password. After repeated failed password attempts it does not show a hash code any help would be greatly appreciated.
    Thanks

  • Can anyone help with my Mini 210 Bios Password

    Can anyone help with my Mini 210 Bios Password
    master password after enter 3x comes CNU9491VLG
    Thanks in advance

    Hi,
    Please try (all lower cases):
       e9lovo36kh   (3rd char is lower case of L).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Could anyone help me with an HP mini 1000 bios password

    Can anyone help me with an HP mini 1000 bios password
    I did not remember that ever set one but it pop out out of blue.
    The S/N is below:
    CNU926623M
    I'm pretty much sitting ducks here.
    Any help will be greatly appreciated.
    Thank you very much.
    This question was solved.
    View Solution.

    Hi,
              Try the below code
    e9lo7gg7f4
    Use the unlock code posted above to enter the BIOS
    Disable all passwords that are enabled
    If asked for current password - type the unlock code
    For new password, just press ENTER key
    Repeat the same for verify password column.
    Then leave the BIOS by saving & exit option to save the changes.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • I need to unlock compaq mini cq10 bios password code is CNU027599F, please help

    i need to unlock compaq mini cq10 bios password code is CNU027599F, please help

    Ash.
    Check your other post.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Hp mini 2140 new battery

    Dear people
    I bought a HP mini 2140 at this store:
    www.computeroutlet.nl  for the price of 169 euro
    Woudenbergseweg 19 Unit C4
    3707 HW Zeist
    T 0343-491149
    Holland
    second hand ofcourse. It had a bad battery, but they said
    for 30 euro more you can have a new battery.
    So i bought the new battery, came home, put it in the HP mini 2140
    let it charge for over 4 hours and it gave 7% was done.
    Is this the normal way with new batteries?
    Should we leave it on the charger/powersupply for 24 hours or so?
    Or is there something wrong with this battery, and maybe it is
    not a new battery?
    Hope you can help me out.
    Bartmans

    Just to let you know, like i said, i would give feedback.
    We now have a new battery and a new hp mini 2140.
    The battery that was not ok, is now ok, because the problem was the hp mini
    not the battery and the charger. The battery charges within 4 hours full and
    works for 2 hours. It took some very long time to find out what was wrong,
    but the company fixed the problem and we now have a good working HP Mini 2140
    Thank you Computeroutlet.nl
    And thank you hp forum members for your feedback wich helped us to get to
    a good solution.
    Bart from Holland

  • Adobe CS4 on HP mini 2140 models

    Hello, we are using the HP mini 2140 and 5101 and 5102 models with CS4 Web premium. The machines are pretty close in spec the 5102 and the 5101 have better graphics. Basically they are atom 1.6 machines with 2 Gig of ram. and 160 gig hard drives. We are connecting them over wireless and are working out of network folders. I have started seeing error messages on some of the machines. the event log shows DR. Watson   event 4097.
    Just wondering if anyone had any leads to this. I am concerned that it may be due to the underpower of the machines. We are also running the machines on the max battery mode.
    Thank you

    The Dr Watson debugger that you are referring to is a component of Windows.  If that is crashing could it be related to DW, yes, does it mean DW is the cause it depends.  The error will say something like "the application, [app name], has failed".  If it is DW it is possible that it is forcing a memory error on your system.  The atom processor was really not intended for more this type of application, but based on the system requirements, DW should work although other elements in the suite will not be supported by Adobe on your machine because it is below the 2ghz requirement for the suite.
    I would check your system monitor and see if all the memory in your system is being read.  Other than that I have to ask that if you have any of the applications are installed and whether they are causing the debugging error, and if so, when does it happen.

  • Mini 2140 shutting off with any kind of movement or jarring rendering the battery useless

    Hello, I have about 260 of these devices and I am running into an issue with the 6-cell extended life batteries.
    We have replaced the 3 cell standard life battery with the 6 cell extended life battery. Now for the issues. I have had several of these come to me with the same problem. When a using sets the machine down it will instantly power off. Almost as if you pulled the battery out. Now, once the machine shuts down you can power it back up just fine. Of course it will shut down instantly again if you touch or jar the battery at all.
      Now some of them get so bad that the machine will not power on and I have to replace the battery with a new one. Does anyone know what cause this? Is there a fix for this?
    I am running
    HP Mini 2140
    XP Pro SP3
    6 cell extended life batteries
    I do have 3 cell batteries that we use as back ups. I have never had one of these go bad so far.
    They have been in use since August of 2009
    Please let me know if anyone else has seen these issuses.
    If you need any more info just let me know.

    wouldn’t be concerned with this if it wasn’t wasting the battery.
    The battery is not being wasted.
    Apparently this mini ipod is suppose to have 14 hour battery life
    That is the "estimated" time of battery life.
    Depends on a lot of different factors.
    As a matter of fact, last night ~11 PM, I turned on my fully charged Mini, set it to Repeat All and hit play. I turned on Hold, set it on my dresser & let it go. on & let it go.
    It was still running tonight at 8:30 PM. It finally died within the last 1.5 hours or so. 21-23 hours is how long I got out it.
    but mine is much less since it doesn’t properly shut off.
    It is properly shutting off. Your battery is probably going bad.
    Your iPod is working exactly as it is supposed to work.
    iPod: About Sleep, Deep Sleep, Hibernation, and Sleep Timer

  • How to recover compaq mini 110c bios password.

    Hi, Please help unlock compaq mini 110c bios password.
    Fatal error code generated CNU9313F9X
    Thanks

    Hi,
    Please try this (under HP or Compaq),
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp 2140 mini reset bios

    s/n CNU9115M5T
    PLEASE help
    thx thx
    This question was solved.
    View Solution.

    Hi
    It is a business series, I think it does not work the unlock code try:
    e9lo33q4qa
    For support contact:
    Contact HP Worldwide

  • HP Mini 110 bios is asking for a password after MoBo battery got unplugged !!??

    I just got the "suprise-we-gave-you-bios-password" error after I was trying to fix a hard drive & keyboard for a HP Mini 110 1116ca.  The on-board battery got unpluged and now it asks for a bios password.. grrrr!
    Why does HP do this!!??  re-seating a mobo battery & jumper is suppose to reset bios passwords not  give you one.
    Much thanks if you can help!
    error: 
    CNU9425WSM
    This question was solved.
    View Solution.

    Hi,
    Try entering:       e9lofxu0hp        ( Note that the 3rd character is a lower case L and the 8th is Zero )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Need Mini 110 BIOS (binary version)

    Hi,
    I'm hoping someone from HP is monitoring this forum and is willing to assist. 
    I'm attempting to repair a Mini 110 (VF704AV, mobo #579568-001) for a friend of mine who, after attempting to upgrade the machine, could no longer get past the HP logo.  Like others I've found on various forums who have had this exact problem, this one refuses to go past POST and hangs on said logo, allowing no further input from the user (a brief AMI screen confirms "CMOS checksum error" before this occurs). 
    After hours of trying to get around this error, I've concluded a new BIOS chip to be the only solution.  However, I need the binary (.ROM) version of the file as contained with HP's SP47135.exe package.  I've found a few close renditions of this file on the 'net, but prefer to have the correct version before committing to have an IC flashed.
    As an electronics/computer person who dates back to the Atari days (first job), I must say I've seen more robust upgrade processes.  But being unable to extract the binary file is what pushed me over the edge here.  I expect better from a company of your stature.  
    If someone at HP can e-mail this critical file to me, I would greatly appreciate it.  Thank you.

    M-dog,
    Thanks very much for taking the time to write.  I had tried Winrar with no success, and just for yuks tried 7zip now.  Same result:  Both will expand the SP47135.exe file, but inside (along with a couple of .sys and .vxd files) is ANOTHER executable (308F0F19.exe) which cannot be decompressed.  
    As for what I've tried...everything I could find on the 'net.  I had near success using a DOS-bootable USB flash drive containing a generic version of the binary file, renamed AMIBOOT.rom to supposedly trick the BIOS into some sort of "limp mode" using CTRL+Home upon power up.  However, in each of 4 tries doing this, the BIOS file attempted to load and claimed to have done so successfully.  But the promised "rebooting now" never occurs; rather, the fan speed goes into a gradual ramp up and nothing more.  Next power cycle leads to the exact same HP logo and locked keyboard.  (I've read of this scenario at least twice on other forums.)
    Not caring and having nothing to lose at this point, I decided to pull the power midway through the 5th attempt at flashing in this manner.  Well, that did it.  I now have a totally black screen and can no longer access the flash drive.  What this leads me to believe is that the others who have had this problem did not (necessarily) lose power during their failed flash attempt, hence my "less than robust" comment originally.  I think the process is flawed and HP knows it.
    A BIOS chip company on eBay will sell me the IC, but I have to provide the ROM data file in binary format, which is proving disgustingly difficult.  Hence, my presence on this forum.
    But again, thanks for your post.

  • Mini 110 Bios Password

    i have a Hp mini 110 & I need a bios password My code is:CNU9252M4K
    Hi Friend.
    This question was solved.
    View Solution.

    First thing I need to know from the forums Admin. or a Moderator that I can give out master passwords on this forum???
    I do not want to be blacklisted for doing so.
    Would a PM be acceptable???
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Hp mini 1000 bios password reset

    Hello, i got a hp mini 1000 from a freind but it is wont open it always ask for password at boot and after three trial it said
    Password check failed
    Fatal error. . , system halted
    2MC84545YP
    I hope someone can help me .
    regards
    This question was solved.
    View Solution.

    Hi,
    After you tap f10 to access the bios menu, enter the code from my first post to gain access to the bios menu - you can then use the method I described to remove the power-on password.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp mini 1000 bios password recovery

    I have an HP mini 1000 that a friend gave me. It is asking for a password at the startup before windows kicks in. My friend doesn't remember the password and after 3 failed attemps it has the error code of
    [edited Serial Number by Moderator]
    How do I get the bios password based on this error code?
    Thanks Tremendously!!
    This question was solved.
    View Solution.

    Hi @Dirtythirty30 ,
    Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

Maybe you are looking for