HP Mini 311 1037 that is having sound issues.

have an HP Mini 311 1037 that is having sound issues. It sounds as if it is going through a spring reverb effect. Is this something that can be corrected? Can the sound card be replaced on this mini? please help.

Try the following steps.
1. Open up device manager.
2. Locate your audio driver.
3. Right click and uninstall the driver.
4. Go to the toolbar in device manager and select "scan for hardware changes."
5. After it completes, reboot the computer.
Try the audio now and let me know if it continues to have the same issue.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

What is a packet problem? I'm having sound issues.

I'm at my wit's end. I am having sound issues. I've run diagnostic tests and everything comes back as OK, but it's not OK! Something somewhere is messed up and I can't figure it out.
I have been to the help rooms on paltlak and opened up support tickets and everything they told me to try has not helped. They suggested I change the sound tuning on my chat program, change exceptions on my firewall, uninstall and reinstall chat program, uninstall and install earlier version, download drivers for sound card, and etc. Nothing is helping this problem.
Someone mentioned that it may be router problems or packet problems. I'm not sure what that means, and that is why I'm on this forum asking for help. I have no other sound problems on my computer. My music and videos play fine. It's just when I'm in a voice enabled chat, do I experience these problems, or if I'm on a website that has videos, the video will not load all the way, so I only get 30 seconds of a video. Does anyone know what could be causing this?
I have used this chat service for over 5 years and up until a week or so ago, it worked fine. I did a complete reformat of my computer in hopes that it would help, but I'm still having the same problems. I lose sound within 5 seconds of entering the chat room. Then it takes between 3-5 minutes before I hear sound again, but then I only hear it for a few seconds. Then it goes away for another few minutes. Repeat. Over and over again.
I'm running Windows Vista on an Acer Aspire 380 with wireless cable modem. I keep losing sound in any voice/sound enabled chat and on any site that has videos. I have 1gig of ram, 300 gb hard drive, 32 bit operating system, 2 processor cores, directx version 9, realtek sound card. Everything is up to date, and firmware is up to date. My speed test is: download: 6.162 mbps and upload: 926 kbps.
When I do the ipconfig/all, it shows
Tunnel adapter local aera connection* 6: Media State: Media disconnected
description: teredo tunneling pseudo-interface
dhcp enabled: no
autoconfiguration enabled: yes
I don't know if this has anything to do with my sound issues on the chat program or not. ??
Also shows:
node type: hybrid
dhcp enabled: yes
autoconfiguration enabled: yes
default gateway: 192.168.1.1
dhcp server: 192.168.1.1
netbios over tcpip: enabled
If by chance it is a packet problem, how do I fix that?

Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
Message Edited by nightrider7000 on 01-22-2008 12:44 PM

I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section. Any ideas?

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

Having sound issues with Mid 2011 iMac 27"

Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X. Could this the issue and if so how do I revert to 10.7.3

It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
Failing hard drive sounds

Trying to backup iPhone 5 that is having screen issue.

Hi Folks,
iPhone 5, MAC iTunes 11.1.5 (5) version
iPhone having hardware issues. Trying to backup and try a restore but unable to get iTunes to accept iPhone.
iPhone screen is blackened. Itunes message pops up asking for response from iPhone to allow access but unable to view screen to respond to iTunes question.
Any tips.
Thanks-Mike

CLICKY CLICK----> http://support.apple.com/kb/PH10929 OS X Mountain Lion: If your computer stops or delays while starting up
and http://support.apple.com/kb/PH11044 OS X Mountain Lion: If you see a gray screen at startup

Mac Mini Late-2012 5.1 Surround Sound Issue

Hey guys, I'm running into some issues setting up 5.1 Surround sound on my mac mini. Heres my setup:
- Mac Mini -> HDMI -> Projector
- Mac Mini -> Digital Output (Toslink) -> Surround sound (Logitech Z906)
No matter what settings i try i cannot get 5.1 surround sound working. I've downloaded test tracks from dolby and all. Logitech is set to 5.1 and all. I've attempted to change the setup in audio MIDI to 48khz + 2ch-24Bit Integer , with no success. The 5.1 option inside of configure output is greyed out. Is there something i'm doing wrong? I've tried the 5.1 test tracks from Dolby through VLC.
Please help me, i've been working at this for nearly 2 days now. I've checked other answers with no sucess.
Thanks in advance.

Unfortunately, there is no configuration option for the S/PDIF interface. The following are the supported output formats:
2.0 (Stereo L/R)
5.1 (Dolby Digital - DVD bitstream or AC3 encoded containers only via QuickTime or VLC)
5.1 (DTS - DVD bitstream only)
To configure for proper 5.1 use, you need to set DVD Player to use Digital Out (Optical), not the Digital Out (HDMI). To configure VLC you need to set it to use Digital Out also, though you may have to fiddle with it to figure out which digital output is which as VLC's advanced configuration options aren't the most user friendly out there.
Once again, for the S/PDIF interface there are no configuration options available other than Stereo. 5.1 tracks will not play properly unless the apps used to play them back are capable of sending encoded digital audio. Dolby Digital and DTS are bitstream formats (encoded), and as such require that the app can work with those tracks.
Audio MIDI Setup does have the option to manually select Encoded Digital Audio in the format menu, but you should not do so as that disables regular stereo playback. The aforementioned apps will automatically switch between Encoded Digital Audio and Stereo, usually reverting to Stereo when playback is concluded.

I'm having sound issues with my iphone 3gs

Ok, so the speaker sound on my iphone 3gs has stopped working. The only sound I do get is my ringtone and if I play a voicemail. I also do get sound when I plug headphones in. However, whenever I get a text message or an email, my phone vibrates even though my ringer is on. I don't hear the click sound when I unlock my screen or type anything. If I push the volume side buttons, the small, black volume/ringer box does not appear and if I play music the volume adjustment setting is missing. I've reset my phone, I've backed it up, I've messed around with the sound settings, my software is up-to-date, I've tried cleaning my headphone jack with a q-tip and nothing has worked. I have no idea why the sound stopped working since the speaker sound worked earlier today, I haven't dropped it, and I've only had this phone for about a year. Any help and/or advice would be greatly appreciated.

I'm sad to report that I have the same issues between three to four times a day. Before I got my iPhone 4S (first iPhone I've owned, btw) I used to have a Sony Ericsson C902 that I operated along with a bluetooth headset HBH-DS205 that used to work perfectly together. Now, with the headset and the iPhone 4S I keep noticing that the connection breaks and all I can do to restore it is to turn the headset off and on every time. I listen to music all day long on the headset and this issue can get to irritating levels. Also sometimes I feel stupid as at work I'm one of the few 4S owners and, the iPhone being a state of the art device, my coworkers get to see me scrambling to figure out whether I need to bring the phone up to my ear or just one of the earpieces to my ear. The headset also has a answer/hang-up button that as of late, for the same reason, I cannot know for sure will start or end a call. I would hate to be forced to drop the headset as I really love it too.

Razr M having sound issues after 4.4.2 update.

So I turned my phone screen on and I saw that I had a update to do the 4.4.2 update and I left it while it updated. I came back and saw that everything was new but the sound keeps making this clicking noise. So when I get a text I hear an odd click followed by my text message tone. It's not just for notifications either, it does it before ringtones and even on the screen lock sound. I was wondering if anyone else had this, I haven't had the phone itself too long either.

PLEASE STOP posting useless "safe mode/master reset" crap in here. It's obvious that these problems are happening to people RIGHT after the software update, and many have already said that they have already reset, etc, and done all this, and it doesnt help. Also, if you actually read, the Motorola forum post I linked to, people have reported similar and nothing fixes it. The update itself caused it. NOT any other apps running. If you have nothing productive or actual troubleshooting to add, please remain silent. Anything else, and you just post in here looking like robotic ******. That's my 2 cents.

Still having Sound issues/ Individual parts too Quiet

After following advice graciously given by TP2GO, to use BatChmod to modify the music folder containing iTunes music files, many of my MP3s continue to have grave sound problems. Main parts of a given song will be inexplicably quieter than they should be, while the rest of the accompanying instrument parts will play as normal. An entire rythm guitar part, for example, has nearly dissappeared into the background. Entire piano parts have nearly vanished from the foreground.
I have tried to play and then import CDs with which I am very familar, especially in consideration to the sound of each instrument on a chosen track. Both the CD and the imported track play perfectly well without any such drastic alteration to the sound. Only music files imported previous to a recent iTunes or Quicktime update, possibly the most recent, however I remain unsure of that, are affected in this way. I am truly not sure of whether this problem is a direct result of iTunes, or Quicktime, or anyupdate thereof, but the the MP3 files are stored exclusively in my iTunes directory and makes these two closely interwoven programs my primary suspects.
Another strange phenominon: I've downloaded from a filesharing program some of the same MP3s which are affected on my computer. When playing these newly downloaded MP3s, the song remains the same, as it were. I thought perhaps, since my download directory was the iTunes music folder that the same thing affecting my other files stored there could be at play in this case as well. So I deleted the file and changed my download directory to the desktop. After downloading the file again the results were the same. Perhaps this is a problem affecting a my computer on a larger scale.
David Babsky has suggested:
"Sounds like 'phase reversal' ..that's to say that instead of things which may be on both stereo tracks appearing to come loud and clear from the centre, they're now "inside out", and have disappeared towards the background: they're subtracted from the overall sound instead of being added together. [..Similar to what happens when the two images of a 3-D film get out of sync, and 3-D images appear "inside out" instead of protruding from the projection screen..]."
I followed his advice to revert to an earlier version of Quicktime, but to no avail.
I've seen one other post about this same problem from Vic Williams.
I had no problems upgrading with iTunes or any other problems with the program itself. It runs perfectly well, no random startups or otherwise weird stuff going on. My computer seems to be quite clean of curruption in the file structures and so forth. No viruses, etc. I recently downloaded MainMenu 1.4.4 from MacUpdate.com and did a full sweep of my computer with it.
Any suggestions? Anyone?
Thanks...Will

go to control panel and them device manager. when the window comes up go down to sound and open it so you can see realtek. highlight realtek and click on the icon at the top of the window for update driver.(one with a green arrow pointing up) if there is a newer driver it will tell you. if not it will say you have the best one.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Anyone else having sound issues after updating? Sound doesn't work.

Ever since I updated to Maverick my sound isn't working. Help!

If you plug-in the headphone, does the sound come through
and the volume buttons work?
If so, remove the headphone and check.
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Having sound issues after recent IOS 6.1.2 update

After updating my Iphone 4s with IOS 6.1.2 the phone does not make any sounds. The headphones work but no sounds of any kind (keyboard, notification, games, music) nothing

Try a hard reset. press the home button and the power button for 30 seconds. once you see the whit apple let it go.
Also, isolate the issue by creating a video and a voice memo. (If theres no sound on either restore as new and then if the issue persists get a replacement.)
lastly, check to make sure the mute button is not on at the top left of the device( no red should be showing)

TS5150 Having sound issues.

Please help! I have sound (effects) when navigating ATV, but no sound when anything is started. Purchased items, YouTube, Netflix, iTunes movies... nothing plays sound. Also, same problem when mirroring a device iPhone or iPad. Any thoughts?
PS: History - Has been working fine for over 1 year. About 2 months ago, remote went out. Thought it was the batteries because it would intermittenly work and then died. Replaced batteries and remote still did not work. Downloaded app for iPhone remote and have been using app to operate ATV. About 1 week ago could not get sound to play as described above. BTW, remote control still not working and I tried the hold down the < and MENU thing.
Any help much appreciated.
Staci

Hi sebdumai,
Thanks for visiting Apple Support Communities.
It sounds like the basic steps in the article above (Apple TV (2nd and 3rd generation): Troubleshooting audio issues) did not resolve the situation. If you were not able to restart the device using the remote, I recommend doing so using one of these methods:
Restart your Apple TV by selecting Settings > General > Restart.
Unplug the Apple TV power cord for three seconds, and then plug it back in.
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
If you continue to experience the issue after completing the above steps, try these steps:
Set the audio output mode for the Apple TV:
With your Apple Remote, select Settings > Audio & Video.
Change the Audio Output setting from Auto to 16 bit.
Turn off the Dolby Digital Out setting (your TV or receiver may not be properly detecting a Dolby Digital signal):
With your Apple Remote, select Settings > Audio & Video.
Change the Dolby Digital Out setting from On to Off.
Regards,
Jeremy

HP Mini 311 Blue Screen

I am on my second HP Mini 311 netbook running Windows 7 Home, with a Verizon internal wireless card.
Both machines have the exact same problem. Blue Screen.
I found the following on the Verizon blog.
The problem is identicle to mine. Help please!
"I have an HP Mini 311-1037 netbook running windows 7, with a Verizon internal wireless card (HP un2400). I'm having intermittent crashes (BSOD) which always happen immediately after I terminate a wireless connection and then shut down VZ access manager. Basically, when I exit the program, the program window goes away, I see a smaller dialog box showing that the wireless card is powering down, and then the dreaded blue screen pops up. The error message code is BUGCODE_USB_DRIVERS. That error message seems odd since the internal card is not a USB device. However, when it powers up, I see a driver loading that is called "Qualcomm HS_USB_QDLoad So far, I've had 8 of these crashes. The event log always shows the same error message as the cause of the unexpected shutdown: bugcheck 0x000000fe (0x00000008,0x00000004, 0x852f05d4, 0x00000000) After the crash screen, windows tries to restart and fails. It then offers me the option of running a startup repair. That always fails. So then I have to do a system restore (roll back to an earlier restore point). That works, but it totally hoses up my A/V software. It then takes about 20 minutes to get that fixed. On balance, a real horror show. After the last two crashes, I discovered that if I decline to run startup repair, and just keep trying to do a normal reboot, then after the second or third try, it will start up OK without doing any repair or system recovery. That is also hard to figure out. HP technical support hasn't been very helpful so for. The HP support forum shows messages from a couple other owners of the same model net book who are reporting the same problem, so there may be a generic problem here. I tried updating the wireless modem firmware, using the latest download from HP. I was OK for 4 days, and then had 2 more crashes." .

I have had the same issue since I purshased the netbook last March. I have called both Verizon and HP in regards to the issue. First Verizon has told me that it is a HP issue and then i get connected to HP. I am on the phone with them for 5 hours cuz they want be to do re-do my network and other stuff. After a couple of days samething. Call back and the samething. I have called 5 times already until I talked to someone two days ago in Verizon IT department. The rep told me not to use the VZ access program due to some issues they are having with Windows 7. I tried to use my netbook this morning and I got the blue screen again without using the VZ access program. So I dont know anymore. You really have to pull your teeth out to get the right help from both companies. I am gonna try and call again later today and see what happens. Why can't us the customers get the proper help and no wasting our time.

My first HP Mini 311 experience. (horror story)

Service Order number:
AQB780 - 01
Well this all started the 20th of April when I purchased a 311 from Ecost.com: http://www.ecost.com/Detail.aspx?edp=55 ... =155441519
I then received it on the 22nd, opened it up from the sealed HP box and upon first firing it up while charging the battery, I discovered it was getting very hot. So I downloaded some temp monitor utilities only to find out that it was hovering around 87c on the CPU!! Then upon doing more research on this very site, I found that there is supposed to be a fan working, and clearly mine did not work at all!
I was so mad! So I contacted Ecost to return it and they tell me: "Dear Valued Customer,
Thank you for visiting eCOST.com.
We received the request for Return Authorization for the HP Mini 311-1037NR 1.60GHz Intel. Please be advised that we are in strict policy that should you find problems with the HP unit, DOA or defective, you are to contact the Manufacturer (HP) directly."
So I contacted HP and created a support ticket, they shipped me out an overnight fedex box that arrived the next morning, I thought great, this should be quick... I avidly check my Repair Status on HP and they say it will be returned on the 30th of April, only 6 days from when it was received. About 5 days in I notice that my status had not changed, so I called support up and they told me there is a delay on a part and 2 calls later and one request to bump it up to a Case Manager, they update my status to this: "Hewlett-Packard is awaiting the arrival of a part to complete your product repair.
Expected Delivery Date:05/14/2010"
THREE FRIGGIN WEEKS!?!? So today I finally talk to a Case Manager on the phone after returning her call, Nice lady named Jeanette or Jennifer (I think) tells me that there's nothing they can do in terms of shipping me out another refurb/new unit but she will talk to the service department to try and escalate the repair and let them know it is a high priority repair.
So now I'm sitting here, without my Mini, not even 1 hours worth of use, with 10 more days to go ALSO with the chance of it being delayed yet again...
This is ridiculous, how does HP techs miss the fact that the fan is not even working, what kind of half-assed diagnostics do they do???? And how is a simple 20 minute fan replacement job taking over 3 weeks to fix, all because of a backorder.
I really, really hope this case manager pulls through for me.
HP needs to really get their QC in check.
/end rant

*FINAL UPDATE!!*
Just got off the phone with Jennifer my case manager, who did an amazing job. I'm getting a brand new HP Mini 311-1037 spec for spec match as my old one send to me in a few days! It's confirmed, the 2 and a half week wait was worth it.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Now I have an extra battery as well And a 1gb stick of DDR 1066 to sell (if anyone is interested)
Hp support was a little gruesome on the wait times, but in the end I am a happy satisfied customer. Thanks HP!

HP Mini 311 1037 that is having sound issues.

Similar Messages

Maybe you are looking for