HP Mini Boot problems
My brother has come to me for help with his HP Mini which will not startup.
The model number is HP Mini 210 - 1012sa. It is just under 2 years old.
I dont know what version of Windows he was running.
Shortly after powering on, I get to the "Windows Recovery Screen" which gives the options to "Launch Startup Repair(recommended)" or "Start Windows Normally".
When I go into startup repair, I get to the blank windows startup screen (blue sunshine image), but no text. I can hear the hard drive is active (and can see the hard drive light is on). after maybe 30 minutes it will progress onto a system repair dialog (I think - speaking from memory there). Only option I can select is "Cancel" (mouse is active). At this stage though the hard drive is no longer active. I left it like this for over 12 hours (overnight) to be sure that it wouldn't progress any further, and it didn't. It seems I cannot get anywhere with this option.
If instead I select "Start Windows Normally", then unsurprisingly startup fails. I just get returned back to the initial "Windows Recovery Screen".
If I hit ESC and F2 (System Diagnostics), then the System Memory Test is Passed. The Primary Hard Disk Self Test fails at 15%, witht the error message "Replace Hard Disk 1". The Hard Disk SMART is passed.
If I hit ESC and F4 (Hard Disk Self Test), then the System Diagnostic results are replicated for the Hard Drive
If I hit ESC and F11 (Error Log) then I see 5 lines of data:
Result: 0303 Time 12082011-085138
Result: 0303 Time 12072011-062828
Result: 0305 Time 12072011-061856
Result: 0303 Time 12072011-061856
Result: 0303 Time 12072011-061056
The problems for him are twofold.
1) He has important data on the failed hard drive (Wedding photos and business data) that has not been backed up for 2 months (Foolish I know!). The priority is to recover as much of this data as possible.
2) Of secondary importance is replacing the hard drive to get his netbook working again.
With regards to the first problem (recovering data). What options do I have?
Some thoughts I had on possible options are:
- Can I boot from USB and then see directly if any of the data is recoverable?
- Can I remove the hard drive and connect it directly to the motherboard of my desktop (It doesnt seem immediately obvious to me how the drive could be removed, or I can get access inside the case)
- Should it just be sent to an HP agent for them to sort out? (It is out of warranty, so want to avoid costly options if at all possible)
With regards to the second problem (repairing machine). I can see that USB recovery files can be downloaded, so I guess that isnt a problem to return to factory state. I imagine that the issue is simply to swap the Hard Drive. Is this an end user achievable task, similar to in a desktop (within the context of not seeing how to get inside the case as highlighted above)?
Many thanks for any assistance.
Connect a usb hard drive to it and copy the files to it while in Ubuntu, instead of accross the network.
I would advise against installing anything to the hard drive.
Safest thing to do is remove the hard drive and use either a hard drive enclosure or usb to hard drive adapter to connect the drive to another Windows PC.
Similar Messages
-
My mac mini has developed a problem starting up. The computer turns on and goes to the gray screen but on the gray screen the apple logo does not appear. After a few minutes the screen just goes gray with a folder flashing from a question mark to a finder logo. I tried the reinstall disks but nothing happend. Any ideas??
jesseThe timing of holding down the C key to boot from the install disk can be tricky. You may have to experiment.
Force the Mini to turn off by holding down the power button for 5 seconds. Then restart and hold down the C key as soon as you hear the startup chime or beep. (Again, you may have to experiment with the timing slightly -- and you have to have a wired USB keyboard for this to work. Borrow one if you don't have one.)
If none off this works, you can usually eject the CD during the startup process by holding down the mouse button, assuming you have a wired mouse. -
Mac Mini boot problem - Debugger called: panic ?
after i push the start button, the first page shows "Your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up." it was written in six languages... secondly, the page i show in this picture appear for just a few second, but i manage to snap a picture on it using my ipad2. after that it repeats the same thing from the first page again and again for several times until it shut down by itself... i do not know what could possibly wrong with that, before it happen i was just finished installing Xcode from itunes store. please help me, i just bought this mac mini 2 weeks ago.
Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
I have a mid 2007 1.83ghz Mac mini that will not recognize the hard drive.It powers on,bongs,shows apple logo,sees optic drive,but can't see the hard drive.It will see a remote hard drive through USB,and snow leopard install disc when powering up using option key but will not boot when pressing shift key,goes into kernal panic.What are the chances of the interconnect board being at fault? Any other help would be MUCH appreciated.
I don't understand that, in your earlier post you said
It will see a remote hard drive through USB,and snow leopard install disc when powering up using option key
If you can get it to boot from either an external volume or disc then:
a) The motherboard is fine
b) You can re-install the OS and start over
If not then the visit is in order ... -
Hi. I have a mac mini that has performed flawlessly for 14 months. 2 days ago we had a power interruption and when I restarted it, it seemed to start up fine, but it would not recognize the mouse clicks. I can move the pointer around the screen with the mouse but it dosen't respond to the clicks or any keystrokes for about 10 minutes. After about 10 minutes of sitting idle, what ever app or menu that was clicked on opens and then the computer works fine. Since it doesn't recognize mouse clicks or keystrokes until approx. 10 minutes after boot up, this precludes me from using any startup key combinations such "C" to reinstall the OS. Anyone have any ideas what could be causing this? Any help would be greatly appreciated.
Hi John, tried to follow your instruction but I feel I don't have the confidence to continue. I booked an appointment with the local Apple shop and had the guy at the Genius Bar check it over. He did the checks you recommend and memory and hardware looked Ok. He did find some permissions incorrectly set, he thought these were stopping the boot. These permissions seemed mainly to be printer operating programmes that are pre loaded in the OS for plug and play service.
These were automatically corrected and the mac rebooted without further work. This took about 30 minutes and there was no charge so all's well that ends well.
Thank you so much for your assistance
Neil -
Recently, I started to come across a rather annoying problem. Whenever I start my mac mini, boot menu comes up as if "alt" key was pressed. I choose HD and then mac mini boots normally. I suspected an imminent HD failure and checked the HD for errors with OSX built in disk utility and third party SMART utility. Nothing seems to be wrong with volume and smart tests are OK. While the OSX is running, I don't see any unusual problems like stalls, beach ball or so. Any ideas appreciated.
Mac mini 3,1 OSX SL 10.6.8.No, I doubt it's a hard drive failure although that cannot be ruled out yet. I would first consider doing a reinstallation of OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Let's see if that fixes the problem. Any chance you have another keyboard you can try? In case this doesn't help.
BTW, are you really a physicist? If so what specialty? -
MSI P45 Neo-f with intermittent boot problems
Current system:
*CPU: Intel core2duo 4300 1,80GHz
Mobo: MSI P45 Neo-F LGA775
*Memory: 1 Kingston 1GB PC2-5300 667MHz DDR2 and 1 Dane-Elec 1GB PC2-5300 667MHz DDR2
Videocard: Club3D Nvidia 8800GT 512MB GDDR3
*Hard drive: 120GB IBM deskstar 7200rpm Ultra-ATA/100 (yes I realize it is known as the deathstar, but it hasn't failed so far, I do back-up because I'm paranoid
PSU: Real Silent Nexus NX-5000 500 watt
*Soundcard: Soundblaster Audigy
OS: Windows XP home, service pack 2
*Lite-on IT dvd-rom drive
*floppy disk drive
I also have 3 case fans spinning away in a marginally large Chieftec Dragon tower.
The parts I marked with an asterisk (*) are parts that I removed from my old rig and re-used.
I'll try to give a clear rundown of my problem and the steps I've taken so far.
3 days ago I acquired the P45 Neo and installed it into my system, together with the 8800GT videocard. I was still using my old PSU, a Chieftec 360watt. This PSU served me well for 7 years, but it was starting to build up noise while trying to keep up games on my old rig.
I had some trouble getting the system to boot, I tried changing some of the 4 pins wires going to the hard drive and the dvd drive. I don't know if it was luck or if I managed to divide the load properly for the system to boot. But I succeeded into booting up, got into the bios and eventually installed WinXP.
As soon as it was time to install the videocard drivers, it stopped responding. I assumed it was a power issue, since I could only install the 20pin and 4pin cpu, but my Chieftec PSU didn't have a 24pin plug to the mobo - and it needed replacing anyway! So I bought a new 500watt PSU that had all the required plugs and more wattage.
I installed the new PSU, checked every connection and pressed the power button. 'Lo and behold, the computer starts up. I install the videocard drivers and it proceeds with no problems. I try to install the soundcard, but the cd says I don't have one installed. I fix that by going to the System list and install the drivers from there. I install a firewall. By then I have successfully rebooted the computer 3 or 4 times. I decide all is well and turn off the computer. But I realize I wanted to check up something on the internet.
I press the powerbutton. The PC power light go up for just a fraction of a second. I can see the blue LED of one of the case fans switching on just as briefly - then it goes out. The computer keeps trying to turn itself on. It looks like it's hickupping to try and boot!
I turn off the PSU power on the back-side because the computer keeps trying and wait for a bit. After 10 minutes, it still doesn't work. I leave the computer for a bit and return an hour later. The computer then starts up with no problems. I turn it off after a few hours, do a reset, start it up, no problems. But then the next day it happens again.
It's pretty tough figuring out what the problem is because it looks..almost random. I considered it could be a heat issue, but sometimes it *does* start up just after it's been turned down. Checking the bios shows no strange temperature shifts.
Hope anyone can help me, because I do not want to go back to my old Asrock moboWhile powered down I cleared the cmos data, removed the Dane Elec DDR2 module and set the bios to optimized defaults. Computer restarted to WinXP with no problems (it has been off the whole night). I shut down WinXP, wait a few moments and then turn the computer back on. Alas, it won't start and starts hick-upping. I turn power off at the PSU again, so it stops.
Now I try switching out the Kingston module instead. By now the computer has been off for 10 min (while I write this entry on laptop). I press the power button on the PSU and then the power button on the front. There is a short pause, lasting a second. The computer turns on, longer now, but it only lasts 2 whole seconds before it turns off again and goes on again (I believe now you can call it powercycling). It repeats this process until I shut off the PSU.
I check to see if I have installed it properly and try again but it starts powercycling again.
15 min pass, I put the Kingston module back in, press the power button and voila, this time it does start. WinXP shows up, no problems. I leave it on for a bit and then shut down. And when I press the power button again - the feeling of dread returns, when it starts hickupping again.
I'm going to see if I can install one of the memory modules from my housemate. Then hopefully tommorrow, I'm going to try if I can test a different PSU, since I see someone else on the forum - who recently posted, has the exact same power supply and also has boot problems, coincidence... or not ^^;. -
My mac Mini has problem rendering images and video
THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty. -
WONK,BONZ , i thinki got the answer for the boot problem :)
hi there wonk and bonz
well mine i think u will be suspecting the psu bcos u have told me that my psu combined watt is lesser than 160
hmmm well now ia around 2am here in singapore..
no choice, i need to setup new computer for my friend , yet i have not settle my own one first...
so i just cant wait and i take allthe tools out, and modify the L11 bridge to 1.7 volt by default...
and guess what? when i set to 166 fsb , it manage to boot up normally without using the reset button , i think 20 out of 20 times that i have tried
i am just suspecting why if the default voltage work so good while if i modify the voltage to non hw default, my pc will not boot up without the a press on the reset button .... , hmm i wonder is it bios problem or the board itself ?(
another thing is , my pc wont be stable at first, then i plug in the 4pin 12volt plug onto the board, and it boot up fine and running win Xp at 11.5 x170 now : )
manage to finish super pi 1mb using 44 seconds
Hmmm well hope all this can help anyone out there with the booting problem and of course, they must be willing to connect the L11 bridge on their athlonXP
Well of course i Hope Msi will look into these problem in order to fix that , hmmm dont tell me that i am lucky to fix it in such a way? Well hope Msi will regain its reputation back )
Thanxx Wonk and Bonz and everyone out there who helped me with advice :D
here is my specs again
tBred A 1800 @2400(11.5X170)
vcore 1.7 default(modified using L11)agp clock 85 ,
PCI autodetect disabled
2x kingston 512 333DDR at 2.5 6-3-3
Wd800JB, Samsung 48x24x48x 8mb buffer
Inno3d geforce4MX@300core x440memhi backwoodz : )
ohh its because if i alter the voltage through the bios, it wont boot up normally , just like what others complaining about , it wont boot up when u press the power button , but after u pressed the reset button , it will boot up if u a re lucky , sometimes i have to press more than 20 times of reset in order to have it boot up
so i doubt that this msi board do have some flaw in terms of Vcore voltage management.
its like if u pull out the power chord( which means your comp lose power completely) then u put it back and u push the power button , it wont boot up , the D Bracket will get stuck at random order sometimes cpu faulty and mostly its memory checking hang.....
so in order to overclock my cpu without altering the BIOS vCore, i can only mod the athlon chip :P
ohh dont worry about the bump, last few days i set up a pc for my friend , its a new chip , same to have kinda a thick black line on one side of the cpu DIE, i think its normal one
maybe u guys never encounter the boot problem bcos :
a)lucky :P
b) u guys having good type of memory?
c) good psu??
but among all the user having boot problem i have seen in their specs having antec power supply, and corsair memory? so i dont think thats the main problem , i still suspect the way this board work out with the bios Vcore setting :P
hopefully someone can confirm with me ab out this : ) -
Random Freezing and booting problems
My MBP (4 years old) randomly freezes and the only button works is the power button. It has booting problems as well
Done already
clean install of snow leopard
PRAM reset
Safe Boot (boots again after using safe boot but still freezes after a couple of minutes)
AHT hardware test with no result
Still freezes after 1 to 15 minutes.
Anything else I cab do?Wow my first time i use this forum and a fast reply.
Unfortunately not at home at the moment so can not give exact answers.
When my mac book freezes the fan still works, keyboard and touch pad do not work anymore. I don't think caps lock light works but not sure.
Have original ram and a retail SL disc.
When I have booting problems I can see the spinning wheel and after that only blue screen. If I power off and start in safe mode and then restart again mbp will boot again for 2,3 or 4 times and then stop booting again but still freezing after a couple of minutes.
The funny thing with the booting is after I see the blue screen I can still connect from my mac mini and browse my MBP from my mac mini.(screen sharing does not work though).
And do not know what smart status is
But thank you for your quick reply. -
Mac Mini boots very slow with Mavericks (after security update)
Hi,
my Mac Mini boots very slow after I've installed Maveriks. I did two clean installs by now, seemed to work OK after the second one but after the latest safety update (2014-002) the boot time is up to 5+ minutes. Starting Safari or other software takes addtional time. See below for system specs, Etrecheck and log. Any ideas what could cause this? According to the update history I did install the security update 2014-002 twice on the same day although I cannot remember doing such a thing.
Thanks Joerg
Hardware Information:
Mac mini (Late 2009)
Mac mini - model: Macmini3,1
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 0:42:32
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (225 GB free)
OPTIARC DVD RW AD-5670S
USB Information:
Mitsumi Electric Hub in Apple Extended USB Keyboard
Mitsumi Electric Apple Optical USB Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
Mac App Store and identified developers
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
AdBlock: Version: 2.6.28
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
1% fontd
0% Console
0% coreservicesd
0% imagent
Top Processes by Memory:
213 MB Safari
90 MB com.apple.IconServicesAgent
90 MB com.apple.WebKit.WebContent
82 MB mds_stores
49 MB Console
Virtual Memory Information:
5.33 GB Free RAM
1.60 GB Active RAM
211 MB Inactive RAM
627 MB Wired RAM
230 MB Page-ins
0 B Page-outs
28.04.14 09:48:09,000 bootlog[0]: BOOT_TIME 1398671289 0
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
28.04.14 09:55:31,000 kernel[0]: Longterm timer threshold: 1000 ms
28.04.14 09:55:31,000 kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
28.04.14 09:55:31,000 kernel[0]: vm_page_bootstrap: 1867682 free pages and 147550 wired pages
28.04.14 09:55:31,000 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
28.04.14 09:55:31,000 kernel[0]: zone leak detection enabled
28.04.14 09:55:31,000 kernel[0]: "vm_compressor_mode" is 4
28.04.14 09:55:31,000 kernel[0]: standard timeslicing quantum is 10000 us
28.04.14 09:55:31,000 kernel[0]: standard background quantum is 2500 us
28.04.14 09:55:31,000 kernel[0]: mig_table_max_displ = 74
28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Sandbox
28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Quarantine
28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
28.04.14 09:55:31,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
28.04.14 09:55:31,000 kernel[0]: The Regents of the University of California. All rights reserved.
28.04.14 09:55:31,000 kernel[0]: MAC Framework successfully initialized
28.04.14 09:55:31,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
28.04.14 09:55:31,000 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
28.04.14 09:55:31,000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
28.04.14 09:55:31,000 kernel[0]: ACPI: sleep states S3 S4 S5
28.04.14 09:55:31,000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
28.04.14 09:55:31,000 kernel[0]: [ PCI configuration begin ]
28.04.14 09:55:31,000 kernel[0]: console relocated to 0xf80010000
28.04.14 09:55:31,000 kernel[0]: [ PCI configuration end, bridges 5, devices 18 ]
28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
28.04.14 09:55:31,000 kernel[0]: NVEthernet::start - Built Sep 19 2013 22:20:06
28.04.14 09:55:31,000 kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
28.04.14 09:55:31,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
28.04.14 09:55:31,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
28.04.14 09:55:31,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 34159efffe270ccc; max speed s800.
28.04.14 09:55:31,000 kernel[0]: rooting via boot-uuid from /chosen: 289A3125-09B8-376B-ACE3-38D61384202E
28.04.14 09:55:31,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
28.04.14 09:55:31,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS545032B9SA02 Media/IOGUIDPartitionScheme/Customer@2
28.04.14 09:55:31,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
28.04.14 09:55:31,000 kernel[0]: BTCOEXIST off
28.04.14 09:55:31,000 kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
28.04.14 09:55:31,000 kernel[0]: 5.10.131.36
28.04.14 09:55:31,000 kernel[0]: hfs: mounted Macintosh HD on device root_device
28.04.14 09:48:39,817 com.apple.launchd[1]: *** launchd[1] has started up. ***
28.04.14 09:48:39,817 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
28.04.14 09:55:30,438 hidd[43]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
28.04.14 09:55:30,439 hidd[43]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
28.04.14 09:55:30,602 com.apple.SecurityServer[25]: Session 100000 created
28.04.14 09:55:31,684 fseventsd[44]: event logs in /.fseventsd out of sync with volume. destroying old logs. (3 442 34362)
28.04.14 09:55:31,738 fseventsd[44]: log dir: /.fseventsd getting new uuid: 4D96DE92-DF6A-4074-A734-C058ACC67177
28.04.14 09:55:33,000 kernel[0]: VM Swap Subsystem is ON
28.04.14 09:55:33,000 kernel[0]: Waiting for DSMOS...
28.04.14 09:55:36,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
28.04.14 09:55:36,000 kernel[0]: IO80211Interface::efiNVRAMPublished():
28.04.14 09:55:36,000 kernel[0]: NVDAStartup: Official
28.04.14 09:55:36,000 kernel[0]: init
28.04.14 09:55:36,000 kernel[0]: probe
28.04.14 09:55:36,000 kernel[0]: start
28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe
28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8216 FirmwareVersion - 0x0207
28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xe000 ****
28.04.14 09:55:36,000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xe000 ****
28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xe000
28.04.14 09:55:36,000 kernel[0]: NVDANV50HAL loaded and registered
28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
28.04.14 09:55:36,000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
28.04.14 09:55:36,000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
28.04.14 09:55:36,000 kernel[0]: Previous Shutdown Cause: 5
28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x6280 -- 0x3800 -- 0xe000 ****
28.04.14 09:55:36,000 kernel[0]: DSMOS has arrived
28.04.14 09:55:37,000 kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
28.04.14 09:55:38,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
28.04.14 09:55:38,142 configd[54]: setting hostname to "Susannes-Mac-mini.local"
28.04.14 09:55:38,147 configd[54]: network changed.
28.04.14 09:55:38,368 com.apple.SecurityServer[25]: Entering service
28.04.14 09:55:38,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
28.04.14 09:55:38,000 kernel[0]: 05f5e100 00500026 NVEthernet::setLinkStatus - Active
28.04.14 09:55:39,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
28.04.14 09:55:39,000 kernel[0]: 05f5e100 00500026 NVEthernet::setLinkStatus - Active
28.04.14 09:55:41,920 digest-service[63]: label: default
28.04.14 09:55:41,921 digest-service[63]: dbname: od:/Local/Default
28.04.14 09:55:41,921 digest-service[63]: mkey_file: /var/db/krb5kdc/m-key
28.04.14 09:55:41,921 digest-service[63]: acl_file: /var/db/krb5kdc/kadmind.acl
28.04.14 09:55:42,335 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
28.04.14 09:55:42,768 loginwindow[38]: Login Window Application Started
28.04.14 09:55:43,026 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
28.04.14 09:55:43,278 airportd[61]: sandbox cache error 3850
28.04.14 09:55:43,423 digest-service[63]: sandbox cache error 11: database disk image is malformed
28.04.14 09:55:43,851 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
28.04.14 09:55:44,005 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
28.04.14 09:55:44,942 digest-service[63]: digest-request: uid=0
28.04.14 09:55:45,441 airportd[61]: airportdProcessDLILEvent: en1 attached (up)
28.04.14 09:55:45,729 awacsd[57]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
28.04.14 09:55:46,356 awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
28.04.14 09:55:46,370 stackshot[21]: Timed out waiting for IOKit to finish matching.
28.04.14 09:55:47,289 configd[54]: network changed.
28.04.14 09:55:47,291 configd[54]: network changed: DNS*
28.04.14 09:55:47,318 systemkeychain[82]: done file: /var/run/systemkeychaincheck.done
28.04.14 09:55:47,593 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
28.04.14 09:55:47,723 mDNSResponder[35]: D2D_IPC: Loaded
28.04.14 09:55:47,723 mDNSResponder[35]: D2DInitialize succeeded
28.04.14 09:55:47,727 mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
28.04.14 09:55:48,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe000 ****
28.04.14 09:55:48,846 networkd[98]: networkd.98 built Aug 24 2013 22:08:46
28.04.14 09:55:48,926 digest-service[63]: digest-request: netr probe 0
28.04.14 09:55:48,927 digest-service[63]: digest-request: init request
28.04.14 09:55:49,050 digest-service[63]: digest-request: init return domain: BUILTIN server: SUSANNES-MAC-MINI indomain was: <NULL>
28.04.14 09:55:49,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
28.04.14 09:55:55,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
28.04.14 09:55:55,395 WindowServer[80]: Server is starting up
28.04.14 09:55:55,554 WindowServer[80]: Session 256 retained (2 references)
28.04.14 09:55:55,554 WindowServer[80]: Session 256 released (1 references)
28.04.14 09:55:55,619 WindowServer[80]: Session 256 retained (2 references)
28.04.14 09:55:55,689 WindowServer[80]: init_page_flip: page flip mode is on
28.04.14 09:55:56,015 mds[34]: (Normal) FMW: FMW 0 0
28.04.14 09:55:56,075 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
28.04.14 09:55:56,238 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
28.04.14 09:55:56,569 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
28.04.14 09:55:56,571 WindowServer[80]: mux_initialize: Couldn't find any matches
28.04.14 09:55:56,572 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
28.04.14 09:55:56,778 locationd[40]: Location icon should now be in state 'Inactive'
28.04.14 09:55:56,964 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
28.04.14 09:55:56,995 WindowServer[80]: WSMachineUsesNewStyleMirroring: false
28.04.14 09:55:56,997 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
UUID 0x6077c6f135c4c44ddc359cba2050401d
28.04.14 09:55:56,997 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
28.04.14 09:55:56,998 WindowServer[80]: WSSetWindowTransform: Singular matrix
28.04.14 09:55:57,421 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
UUID 0x6077c6f135c4c44ddc359cba2050401d
28.04.14 09:55:57,421 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
28.04.14 09:55:57,421 WindowServer[80]: CGXPerformInitialDisplayConfiguration
28.04.14 09:55:57,421 WindowServer[80]: Display 0x764bdc00: Unit 0; Vendor 0x4dd9 Model 0x2f70 S/N 0 Dimensions 13.31 x 10.63; online enabled, Bounds (0,0)[1280 x 1024], Rotation 0, Resolution 1
28.04.14 09:55:57,422 WindowServer[80]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
28.04.14 09:55:57,592 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C560 Susannes-Mac-mini.local. (AAAA) that's already in the list
28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C9F0 C.C.C.0.7.2.E.F.F.F.E.9.5.1.6.3.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E160 Susannes-Mac-mini.local. (Addr) that's already in the list
28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E5F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
28.04.14 09:55:59,615 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x0000428b, unit 0, caps QEX|MIPMAP, vram 256 MB
28.04.14 09:55:59,715 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
28.04.14 09:55:59,716 WindowServer[80]: GLCompositor enabled for tile size [256 x 256]
28.04.14 09:55:59,716 WindowServer[80]: CGXGLInitMipMap: mip map mode is on
28.04.14 09:55:59,726 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
28.04.14 09:55:59,801 loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
28.04.14 09:56:00,154 configd[54]: network changed: v4(en0+:192.168.178.24) DNS+ Proxy+ SMB
28.04.14 09:56:00,166 configd[54]: setting hostname to "susannes-mini.fritz.box"
28.04.14 09:56:01,357 awacsd[57]: Exiting
28.04.14 09:56:02,738 WindowServer[80]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fc9bb513090) - enabling OpenGL
28.04.14 09:56:03,337 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
28.04.14 09:56:03,383 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
28.04.14 09:56:03,397 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
28.04.14 09:56:03,448 ntpd[106]: proto: precision = 1.000 usec
28.04.14 09:56:03,489 launchctl[126]: com.apple.findmymacmessenger: Already loaded
28.04.14 09:56:03,785 com.apple.SecurityServer[25]: Session 100004 created
28.04.14 09:56:04,311 digest-service[63]: digest-request: uid=0
28.04.14 09:56:04,312 digest-service[63]: digest-request: init request
28.04.14 09:56:04,316 digest-service[63]: digest-request: init return domain: MACMINI-270CCC server: SUSANNES-MINI indomain was: <NULL>
28.04.14 09:56:04,363 digest-service[63]: digest-request: uid=0
28.04.14 09:56:04,364 digest-service[63]: digest-request: init request
28.04.14 09:56:04,368 digest-service[63]: digest-request: init return domain: SUSANNES-MINI server: SUSANNES-MINI indomain was: <NULL>
28.04.14 09:56:04,370 UserEventAgent[127]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
28.04.14 09:56:05,219 loginwindow[38]: Login Window Started Security Agent
28.04.14 09:56:05,648 SecurityAgent[142]: This is the first run
28.04.14 09:56:05,649 SecurityAgent[142]: MacBuddy was run = 0
28.04.14 09:56:05,672 SecurityAgent[142]: User info context values set for susannescherwinski
28.04.14 09:56:06,399 loginwindow[38]: Login Window - Returned from Security Agent
28.04.14 09:56:06,427 loginwindow[38]: USER_PROCESS: 38 console
28.04.14 09:56:06,000 kernel[0]: AppleKeyStore:Sending lock change 0
28.04.14 09:56:06,970 com.apple.launchd.peruser.501[145]: Background: Aqua: Registering new GUI session.
28.04.14 09:56:06,996 com.apple.launchd.peruser.501[145]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
28.04.14 09:56:06,998 com.apple.launchd.peruser.501[145]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
28.04.14 09:56:07,002 launchctl[147]: com.apple.pluginkit.pkd: Already loaded
28.04.14 09:56:07,002 launchctl[147]: com.apple.sbd: Already loaded
28.04.14 09:56:07,029 distnoted[149]: # distnote server agent absolute time: 479.663146784 civil time: Mon Apr 28 09:56:07 2014 pid: 149 uid: 501 root: no
28.04.14 09:56:07,530 UserEventAgent[148]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
28.04.14 09:56:07,732 com.apple.SecurityServer[25]: Session 100006 created
28.04.14 09:56:07,760 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
28.04.14 09:56:07,793 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
28.04.14 09:56:07,820 sharingd[170]: Starting Up...
28.04.14 09:56:07,954 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
28.04.14 09:56:08,649 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
28.04.14 09:56:09,364 com.apple.IconServicesAgent[201]: IconServicesAgent launched.
28.04.14 09:56:09,577 accountsd[202]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
28.04.14 09:56:09,719 com.apple.SecurityServer[25]: Session 100009 created
28.04.14 09:56:10,587 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
28.04.14 09:56:10,588 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
28.04.14 09:56:10,847 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68855c320 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
28.04.14 09:56:10,864 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68847aab0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
28.04.14 09:56:12,097 imagent[189]: [Warning] Services all disappeared, removing all dependent devices
28.04.14 09:56:12,122 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
28.04.14 09:56:12,123 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
28.04.14 09:56:12,163 soagent[184]: [Warning] Services all disappeared, removing all dependent devices
28.04.14 09:56:12,181 soagent[184]: No active accounts, killing soagent in 10 seconds
28.04.14 09:56:12,184 soagent[184]: No active accounts, killing soagent in 10 seconds
28.04.14 09:56:12,417 secd[207]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
28.04.14 09:56:12,417 secd[207]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
28.04.14 09:56:12,639 secd[207]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
28.04.14 09:56:12,639 secd[207]: securityd_xpc_dictionary_handler WiFiKeychainProx[182] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
28.04.14 09:56:12,944 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
28.04.14 09:56:22,465 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
28.04.14 09:56:23,038 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
28.04.14 09:56:23,156 soagent[184]: Killing soagent.
28.04.14 09:56:23,156 NotificationCenter[181]: SOHelperCenter main connection interrupted
28.04.14 09:56:23,159 NotificationCenter[181]: SOHelperCenter main connection interrupted
28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:184)
28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:184)
28.04.14 09:56:23,314 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
28.04.14 09:56:23,316 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
28.04.14 09:56:24,403 parentalcontrolsd[216]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
28.04.14 09:56:33,245 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
28.04.14 09:56:33,310 soagent[217]: [Warning] Services all disappeared, removing all dependent devices
28.04.14 09:56:33,318 soagent[217]: No active accounts, killing soagent in 10 seconds
28.04.14 09:56:33,467 com.apple.dock.extra[212]: No endpoint returned trying to load UnreadCountController.bundle, suspending
28.04.14 09:56:33,493 soagent[217]: No active accounts, killing soagent in 10 seconds
28.04.14 09:56:33,494 soagent[217]: No active accounts, killing soagent in 10 seconds
28.04.14 09:56:44,319 soagent[217]: Killing soagent.
28.04.14 09:56:44,320 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
28.04.14 09:56:44,322 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:217)
28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:217)
28.04.14 10:00:56,532 WindowServer[80]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
28.04.14 10:00:57,256 WindowServer[80]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.72 seconds (server forcibly re-enabled them after 1.00 seconds)
28.04.14 10:00:59,103 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x42d] flags: 0x8 binding: FileInfoBinding [0x1f3] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
28.04.14 10:00:59,104 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:64 scale: 1
28.04.14 10:00:59,143 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x3df] flags: 0x8 binding: FileInfoBinding [0x2e5] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
28.04.14 10:00:59,144 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:64 scale: 1
28.04.14 10:00:59,208 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x1f5] flags: 0x8 binding: FileInfoBinding [0x42f] - extension: mp3, UTI: public.mp3, fileType: MPG3.
28.04.14 10:00:59,208 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: mp3, UTI: public.mp3, fileType: MPG3 request size:64 scale: 1
28.04.14 10:01:03,377 mds[34]: (Normal) Volume: volume:0x7f9c5c863000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.S2FNIL
28.04.14 10:01:17,708 System Events[269]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
28.04.14 10:01:17,709 System Events[269]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
28.04.14 10:01:24,175 Safari[219]: ERROR: ForceShrinkPersistentStore_NoLock -delete- We do not have a BLOB or TEXT column type. Instead, we have 5.Anybody?
Did I something wrong? Too many lines of log? Wrong category? Enlighten me. Thx. -
K7N2 Delta-L: Strange cold boot problem & solution
My K7N2 Delta-L has a problem cold booting when the vcore is set in the bios at 1.65v of higher. After a cold boot, you get a blank black screen. I noticed that even if you run at default speeds but set the vcore to 1.65v of higher the problem still occurs. There is no problem rebooting however.
I found the following solutions:
1. After you power up and get a blank, hit the reset button.
2. Don't unplug your PC. My PC is connected to a AVR and after I power down the PC I usually turn the AVR off. If i do this, than the computer will have a booting problem if I try to boot it up 30 minutes later or so. Now if I don't unplug it/power off the AVR than everything is fine.
I don't understand why it acts the way it does though.
Does anyone know of any other solutions?Have you cleared the cmos. If you do be sure you have the power turned off don't move the cmos jumper with the power on.
I found that turning off power at power supply and unpluging, than turning on the computer the fans will spin just a little this drains all the power. Clear cmos 2-3 than return to
1-2 position.
Than plug the power back in and turn it back on, than try the computer again. -
Mid 2006 iMac Boot Problem (Since latest firmware update)
I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!Actually, I think it'san early 2006.
-
1st series iMac G5: Booting problems, kernel panics, waking from sleep...
Specifications of the iMac described: 1.8 Ghz, 1GB, 80GB, 64 Mb Nvidia VRAM, Airport, 10.5.5
Back in August 2004 my dad bought us kids an iMac G5 for ‘family use’. It had a fresh install of 10.3.5 on it and compared to the (1999) iMac G3 it replaced it was amazingly fast.
The iMac never showed any signs of probable issues, until we decided to upgrade to Leopard in January 2008. Initially, this upgrade was only meant to be able to sync with the latest iPod nano (who demanded a newer version of iTunes).
After the installation the first thing I noticed was a high CPU usage, the machine seemed slower than ever and that with 1 Gb of RAM (the minimum sys. req. for Leopard are 512 Mb of RAM). Anyway, then the real thing started, it wouldn’t turn on anymore. We brought it to an Authorized Apple Reseller, the Tech department said the Logic board had failed. The costs of the fix weren’t the worth the computer anymore, so...end of story. The iMac was indeed one of the bad series, although it hadn’t any swollen capacitors.
My dad already made up his mind and bought himself a Macbook. He then told me that if I was able to get the broken iMac fixed, I could keep it. And so, I bought an ‘as-is’ logic board on Ebay. Last weekend I installed it, and it actually seemed to work! Yet, the problems are during the startup: the first thing I see is a screen full with horizontal lines flickering all the time, like an old TV with bad signal. Mostly it won’t boot and I get the message to restart the computer (kernel panic, I got dozens of logs already!). Sometimes it got stuck during booting (grey apple screen with gear in the middle) making the fans go crazy (after a while) and sounding what others describe as a ‘jetliner taking off’ sound. Sometimes the screen remains black. Generally it takes me 5 to 10 minutes to start up properly. Maybe it’s just me but it seems like when the computer has warmed up a little (by turning on and off on and on) starting up gets smoother. I mean the startup screen suffers from less horizontal flickering lines.
During the use of Leopard, I again get high CPU usage, especially when I use multiple programs at the same time, or when starting multiple programs. My iStat Pro said once that the fans were running at 4700 rpm and the heat of the CPU was about 70 Celsius. If I really want to **** my iMac off I should play a racing game. That just totally freaks him out! These problems could probably be solved by adding more RAM. Right?
The iMac also has a sleep problem. Sometimes after lets say an hour or so, you can’t get it out of sleep mode (by manipulating keyboard and/or mouse, the sleep light stops, but the screen stays off --> only solution is to restart). What happened to me once was that it slept so long that it just got into a deep sleep by turning itself off completely!
Here’s a list of what I tried so far:
- Disk Utility: Resetting the permissions, no problems were found.
- Resetting the SMU, both on the logic board itself as by pressing the power button 5 - 8 seconds, no improvements.
- Resetting the PRAM, no improvements.
- Did the Hardware test of the original install CD, nothing was found, all good.
- Did Archive and Instal, this actually messed my system entirely, cause it wouldn't boot at all and when starting up from the Leopard installation DVD it wouldn't recognize the Macintosh HD.
- Did Archive and Instal with the original disks, this disk did recognize Macintosh HD and so I installed the original system, 10.3. Booting problems and those flickering lines are still there though.
Next phase will be erase and install, but first I want to know what you guys think about all this.
Oh eh, One more thing; The guys at Applecare (phone support) told me that the replaced logic board was also out of warranty and so they couldn’t help me. But as the man on the phone was kind, he told me to go look for a special ‘driver’ on the net. He said that the driver should be able to resolve some of the issues described. He said that I had to give in the name of the LB on google and look for results. Is this bogus? Because I haven’t found anything useful on google so far. What’s the name (rather than a number) of the LB in the first place?
I hope you guys can give me some answers. I'm kinda desperate. But I still feel there's hope...The symptoms of a flakey power supply are sleep problems and you have done all the right things as far as resetting the SMU and PRAM. Your CPU usage can be tracked by going to Utilities>Activity Monitor - look and see what is hogging the memory. The flickering lines could also be an optical system going south.
The other thing you can do is run DiskWarrior or TechToolPro to see if you have corrupted directories. Preferential Treatment will let you check for corrupted preferences. -
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
While will my photoshop elements 5.0 no longer download photos from my Canon T2i camera?
Just recently my Photoshop Elements 5.0 will not download from my Canon T2i camera. - It connects properly, finds and counts the photos on the card, but when I click on "get photos" to download the photos, I get an error message saying it cannot find
-
How to make a button as a default if ENTER key it hit
Hi, Currently (may be the default behavior), pressing an enter after entering the search text for example, doesn't work. I typically get the following error message: ERR-1777: Page 33 provided no page to branch to. Please report this error to your ap
-
Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Lib
-
I set Crystal Reports 2008 as a prerequisite when deploying a Visual Studion 2008 application. With the original 2008 .msi file this worked great. The Crystal Reports runtime installed as expected. Since CR 2008 is now up to SP1, I replaced the ori
-
Itunes redeem gift cards & sign in password question
two questions: 1) my kids have gathered multiple itunes gift cards. is it possible to just load all the card numbers into the itunes redeem section, and use those for some other date, or do you have to download items immediately after listing each ca