Hp mini will not boot from usb and USB not listed as a choice

I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
Also when it kinda starts im at the DOS screen....system32.exe???????
I dont know what this means

Hi cathy69:
 Thank you for your inquiry.   I am pleased to assist you!
I hope you had a great weekend!
I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Imac 27 will only boot from internal and from factory install DVD?

    I was trying to create a bootable external source for my iMac 27 and came across a pretty odd scenario. One that Apple iteslef says they have never seen before. Love any feedback on how to create a external bootable source. Below are my notes from the 45 minute conversation I just had with Applecare.
    My iMac 27 purchased in December, 2010 Will not boot from:
    Apple Factory Install DVD (white printed with Snow Leopard)
    TechTool Pro 5.06 DVD
    SD Card with Bootlable installation
    EXT HDD with previous bootable (Leopard 10.5.9) system on it
    eDrive on an EXT HDD
    I had a 45 conversation with Applecare and the tech has never heard or seen a situation like this one.
    Every source shows up if I hold the "option" key down upon power up.
    Every source shows up in the System Prefs Startup window (though there was one oddity that he had not seen before. I have to authenticate each and every time I try to change my startup disk in the Startup Disk Prefs)
    Every source other than the internal has the same result if I try to boot into it, gray screen with dark gray Apple logo, no gears running, no optical accessing, just the gray screen forever.
    We reset my PRAM and tried again. No change
    Then the Applecare tech had to get off the phone in order to do some further research.
    He came back and we tried to startup from the DVD that shipped with my iMac, not the white factory Snow Leopard I got from Amazon, but the gray install DVD from Apple.
    This one booted.
    We repaired permissions and checked the internal disk from the Apple Gray Install DVD.
    That is as far as the tech could go. He is sending me out a new copy of Snow Leopard, but is unable to support me in my quest to boot from an external source.
    I am going to try and create a bootable external source using the gray install dvd instead of the commercial Now Leopard one and see what happens.
    Thanks,
    Henry

    The point is that V.K. is correct.
    You cannot create a bootable disk for your iMac from the factory Snow Leopard DVD because your machine was released after Snow Leopard was and as such relies on operating system changes and drivers that exist solely on the disc that came with your machine.
    I'm really surprised if an AppleCare agent didn't know that.
    To create a bootable external drive either use your Software Restore disc or create a bootable clone of your internal drive using an app like Carbon Copy Cloner.

  • HT1414 my ipad mini will not charge from wall socket and it will not show itself on i tunes via my pc... i have also substituted my power charger from my i-phone to no avail.

    my daughter's i-pad mini will not charge up from the wall socket and it will not show itself on i-tunes via my pc... i substituted the power charger from my i-phone to no avail with the wall socket... seems like i read that the earlier i-pads have some problems with the lightning socket but can not remember exactly...there is no apple retail shop in the small city where i live but would travel to one if the fix is relatively quick or easy...otherwise, what can i do for diagnosis and repair?

    Most likely your cable is bad and you need to get a replacement.
     Cheers, Tom

  • HP Pavilion 11 x2 not booting from USB

    I have tried everything I can think of but my HP Pavilion 11 x2 will not boot from USB...I have Windows 10 currently installed on it and need to boot from USB to allow me to install a new OS on the machine.
    I have gone into hte bios...(which I can see is a locked bios with very limited options)....I have turned off the Secure Boot option and have set the USB has the first boot device.
    But when I hit F9 on startup...it just gives me 2 options:-
    OS Boot Manager
    Boot From EFI File
    I have tried Boot from EFI File...but this does not work..
    I know the USB is configured correctly as I can boot from it on my desktop computer.
    How can I get this to work?
    Thanks in advance

    hi,
    i stumbbled into your thread while i was looking for a similar answer for my Pavilion X2 10".
    mine was delivered with win 8.1 with bing. it was alright to use, but i was unable to bring this machine to connect to my office domain. due to the lack of networking features which is only available in the pro or enterprise version of win 8.1.
    i tried many ways to load in a win 8.1 pro os. the disc is authentic, keys are authentic, usb stick or optical drives; it makes no differences. the machine just refuse to boot into the usb disc / stick like all other previous system does.
    there isnt an option for the bios to go into legacy mode. however there is an option to turn off the secure boot, but that does not gives legacy support to the make the system boot to usb.
    i had probably done the same things you tried, no matter what setting is done to the bios, there is always only 'os boot manager' and 'ueif' when i hit boot sequence (f9).
    had tired everything that i can think of, talking to HP was like talking to an answering machine, and they were asking the most bacis questions ... "were you able to select 'legacy boot' from the bios menu?" ... even when i tell them there isnt a legacy boot option in the bios ... they were too amature .
    i concluded that the only way to boot to usb is to do it in uefi with secure boot off and encryption turn off in win 8.1 (else it will bring u to bitlocker).
    but i am still unable to boot into the usb media to install win 8.1 pro today. i gave up.

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • Boot from floppy and install arch from flash stick - NO CDR - USB 1.1

    MY PREVIOUS POST BELOW BECAME A HARD DRIVE INSTALL POST WHICH HAS HELPED THOUGH ISN'T ON SUBJECT CURRENTLY AND I STILL NEED SOLUTION  - Now at day 3 :-) - sorry!
    I have old laptop with a very broken CDR... so just a floppy and a hard drive and 2 USB 1.1 ports.
    [Need commands and which floppy is best]
    The USB install WIKI
    http://wiki.archlinux.org/index.php/Ins … _USB_stick
    says to write the .img file to flash stick...
    --- that I can do!
    Though trying a similar process:
    I've had no luck with a hard drive install (also on wiki) as I believe that once I write the .img file to the hard drive it WILL boot though can't create mount points as the drive's in use!
    Anyways...
    IF I have the flash stick with the .img file on it as per the wiki instructions
    what commands would I use and what boot floppy would work for:
    - booting from floppy
    - mounting? the flash stick with arch core on it
    - then installing from there to single hard drive partition.
    thing is I'm just barely ok with using
    dd   fdisk and mke2fs
    So: I need to know what command to mount USB stick... then HOW do I get arch installer on the img file to boot up??
    Any guru tips really needed ....thank you!
    Last edited by yvonney (2009-01-28 08:44:59)

    nice Kirurgs
    doesn't boot from usb... and CDR very broken... good though as I've learned a lot....
    dell inspiron 2500 1 ghz pentium III
    method 1) used puppy after booting off wakepup2 floppy ....very handy that wakepup flopppy though be advised there's several versions of wakpup2 and try the second boot option on the aug or sept 2008 version it WILL find your USB device even if like me I had an old 128 meg one.  also, Crash, a guy at the puppy forums has a 3 floppy set that's specific to whatever puppy version you're running... try that as a last resort
    UN-NECESSARY BLATHER COMMENT: The way those puppys are created weird me out., the more I looked around, Yes, I've read a wee bit about Aufs, and what goes into the whole persistent thing.... seems like lotsa almost impossible  to ever 'really' know stuff is going on it there.... Consider the source of that comment of course... I have huge blank spots in my knowledge and skill and am actually only a relentless year one linux'r... [not counting 6 years of hum and haw] though I'd wanna build my own live arch usb with tips from here before I ever tried to REALLY figure out what goes into creating puppy. I'm saying that at one or two points I thought.. hmnmm... perhaps puppy on this old laptop.... though concluded that ARCH for ALL things is really the only option. puppy's a great boot and hunt around thing though (for me, and in my current opinion).
    method 2) eldamar and eldamar's guide which started me towards success .. which I basically now just do the dd command to an empty partition after booting from puppy .... THEN thrown in a supergrub floppy .... have it 'bring alive' the partition I've just dd'd the arch .img to.... and reboot.... oh, and from puppy I can create partitions as well.. gparted I think.
    method 3) untested also can use plop floppy  it's a boot loader... you may be able to get slitaz distro to create one for you through the 'bootfloppybox' terminal command... not sure if it uses the old floppy linux version of PloP or the win version or what.... dunnno dunno!!! gotta go! :--)
    crazy busy so writing to say... pretty much all fine! :--)
    for me this move was 3-4 days of lots of WONDERFUL bad luck... with everything from puppy hell, my partial-dumbness and back..
    thing is.... I'm real good at it now.... hehehehe
    gotta love problems!
    Last edited by yvonney (2009-02-03 17:27:56)

  • Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen, Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen

    Hello, My mac mini will not boot. When I turn it on, I get the chime, then the white screen, then the apple symbol, then a file symbol with a question mark, then the white screen and then it stays like that.
    Is this a bad hard drive?

    Sounds like it.  Try booting from your OSX restore DVDs - startup and hold down "C".  This will take AGES! Then run Disk Utility from the menu. 
    The flashing ? means your system is corrupt, dead, not there, on a dying HD, etc...

  • Cannot boot from USB HD on T61 & T61P Why not?

    Have bootable WD and Hitachi HDs in external USB enclosures.  Have successfully cloned one of these WD) using Acronis.  When trying to boot from the USB attached drive using PF12 and selecting the recognized drive on the boot menu get either BSOD or message unable to boot operating system.  What gives?  Know the WD will boot internally as it was the disk that came with the system.  Get the BSOD with this disk in USB port.
    Hitachi give me the unable to boot operating system message when trying to boot from USB drive.
    Using a TrekStor HD enclosure pn D260U20P10-3 which works fine if I boot the internal HD.  Can copy and even backup internal drive to external HD but can not boot from it. 

    Hello,
    As I understand it, Microsoft Windows 7 and earlier operating systems do not support booting natively from a USB Mass Storage Controller interface.  The installers do from things like USB-attached optical disc drives and flash drives, but that's not the full operating system.
    Support for booting from USB in the main operating system environment might be introduced in Windows 8—I thought I read something about this, but cannot seem to find a reference right now.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Ipad mini will not boot up after charging

    ipad mini will not boot up after charging

    Hi luckysue,
    If your iPod mini isn't booting up or responding after charging, you may find the troubleshooting steps outlined in the following articles helpful:
    Reset your iPod - Apple Support
    iPod only shows an Apple logo and doesn't start up - Apple Support
    Regards,
    - Brenden

  • Iphoto on my used mac mini will not open my photos from my new macbook air, it says to update software but there arent any available.. please help

    iphoto on my used mac mini will not open my photos from my new macbook air,  it says something about updating the software, but i checked and there arent any updates available... please help

    Sorry for the second post..
    I currently do not have an older version of iPhoto to test this on, but you might also try coping the Originals from the iPhoto Library of iPhoto 11.
    To do that;
    1. Right (control) click on the iPhoto Library in the Picture Folder on the MacBook Air
    2. Select Show Package Content.
    3. Click on the Originals Folder
    4. Navigate to the disired Event or photos and copy those images to your Flash or External Drive, then copy those to the older version of iPhoto.
    Beware do not move, add or delete anything in the iPhoto Library, Apple has intensionally hidden it in later versions to prevent people from messing things up.

  • Mac Mini will not boot OS, can I get to files with another Mac?

    My mac mini will not boot the OS proserly, it goes to a screen that tells me that some root folder can not be found.
    The install CD works and I can boot to it. The disk utility reports no problems, all disk repairs done and OK.
    The computer still will not boot to the OS.
    How can I get the files I need off the drive before I reinstall the OS?
    I have other Macs and fire wire cables, cross over cables, regular eithernet cables. What can I do?
    Thanks!

    How can I get the files I need off the drive before I reinstall the OS?
    Connect it to another Mac with a FireWire cable and start it up with the T key held down.
    (40535)

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

  • Mac mini will not complete shutdown-closes desktop, goes to blue screen, and spinning icon just spins forever, so  must power off to reboot.

    Recently, My Mac-mini will not complete the "shutdown" or "restart" routine; it closes the desktop screen, goes to the light blue screen, but then the spinning indicator (not the "wheel of death") just keeps spinning forever with no shutdown (I've let it spin for >2 hrs.).  Have run disk/permissions verifications and repairs from applejack, disk utility, Mactuneup.app & all report ok.  Any suggestions, please?
    Doug

    Have you tried with
    Control Option-Command-Eject

  • ThinkCentre m58 did not start booting from usb!!

    heloo ..
    i have ThinkCentre m58 , i tray to format it by usb bootable windows but the pc did not start booting from usb!!
    my usb have windows insid it.

    Thanks for your effort!!
    I deleted solaris and I'll continue to use Debian

  • Can all macbooks boot from usb(stick,hdd) and firewire(hdd) an os: linux, win, mac os x, opensolaris, etc

    Subject: BOOT FROM EXTERNAL STORAGE DEVICE - After this setup properly
    Can all macbooks boot from usb(stick,hdd) and firewire(hdd) an os: linux, win, mac os x, opensolaris, etc?
    what about:
    Apple MacBook Pro MB133LL/A 15.4-inch Laptop(OLD VERSION) (4GB RAM 120G HD 2.33 GHz Core 2 Duo processor, 15.4" Matte Screen, 4GB memory, 120 GB 7200 rpm hard drive) White

    Yes,
    Disconnect everything hooked up to the PC except the keyboard, mouse and monitor.
    Then use this method to flash the BIOS.  It is the safest way to go.
    USB Device BIOS Flashing in DOS
    DOS Flash  (DOSFlash.exe, FlshUefi.cpu) is the DOS-compatible System BIOS flash utility that can be used from a DOS bootable storage device (where "DOS" refers to any of a number of compatible operating systems such as FreeDOS, MS-DOS or DR-DOS). FlshUefi.cpu is the required driver for DOSFlash.exe. To flash the System BIOS from a bootable USB storage device, you will need to copy the contents of the DOS Flash folder to the USB device, boot the PC from the USB device, and execute the DOSFlash application. To see a more complete description of the DOS flash utilities, view DOSFlash.txt located in the DOS Flash folder. This folder also contains the required binary image of the BIOS.  The binary image file is named xxx_MMmm.bin where "xxx" is the BIOS family, "MM" is the major version number, and "mm" is the minor version number.  This file can be copied to the root directory of any USB removable medium for use with the F10 setup "Flash System ROM" option 
    View Contents of DOS Flash Folder
    The links on this post don't work. I copied the section from the BIOS flashing instructions for the specific section you need.
    Paul

Maybe you are looking for