HP Mini110-1192EO will not get passed F9/F10 boot screen

This problem relates to an HP MINI110-1192EO purchased in Sweden little over a year ago and is therefore out of store warranty.
1) The HDD crashed and has been replaced.
2) Installation by recovery from HP Partition is thuis impossible and installing Windows 7 Starter from install media fails.
3) Windows XP Retail install fails with BSD (Blue Screean of D.)
4) Installing Linux Ubuntu 11.04 LTS 32 bit worked, then failed on language install hanging on boot screen as described above AGAIN.
5) Replaced and checked disk, and now I cannot select F9 to boot from CD/DVD or USB
6) Nor can I select F10 to enter bios.
7) Unplugged battery to CMOS / BIOS and reset the whole thing. Got the time reset and now it still hangs on boot screen showing F9/F10 all the time without the 5 sec. timer ever coming up.
Had to unplugg battery pack and run ONLY on main power cord to be able to get this far even.
Before this it only showed the HP circular logo and not even F9 / F10 option.
So is this now nothing more than a piece of gloryfied plastic sinker or is there a recovery for the machine at all in sight?

Its a hardware issue, possibly memory but may be a bad motherboard.

Similar Messages

  • My iphone will not get off the apple logo screen. it also will not let me reset it and won't restore when plugged into my mac. what should i do?

    my iphone 4 will not get off the apple logo screen.
    I've been trying to rest it for several hours with no luck.
    It also doesn't do anything when plugged into my mac,
    itunes will not recognize it at all.
    what should i do?
    thank you !

    Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button, for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then click the Restore button of iTunes.

  • T/X will not get pass the palm screen

    TX froze,
    tried to reset, however it keep going from the orange palm  screen to the gray palm screen.
    i can not get it to reset.
    Post relates to: Palm TX

    I would recommend checking to see if you're performing the reset correctly. But, in regards to your particular issue, I would suggest that you perform a hard reset(performing a hard reset will erase all data thats currently stored on the device). If you would like to do a hard reset please click or paste the following URL into your browser: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=42094
    Post relates to: Treo 800w (Sprint)

  • Will not get pass set up

    when I turn on My nano it will not let me select lanage. or move pass that

    Been through these?
    The Five Rs.

  • Mac will not login and will not get past start up blue screen

    I installed a new security update and then I clicked for the computer to restart after it did it would not login into the computer, it just stays on the blue screen and says starting Mac OS X... Also before I had to login with my username and password and it just automatically skipped that step and tried to login. I have tried using the disk utility in the install disk, I have also tried the fsck and nothing seems to be working. Please help with any ideas or thoughts you might have.
    thanks
    sean

    Hi table,
    I had the bluescreen thing happen to me a while back. I too tried to login as 'safe-mode'. The first time I tried it I must have gotten the timing wrong because the login window did not appear. I did eventually get the timing right and it worked, however prior to that while I was sitting there looking at a blank, blue screen I hit the enter key. The login window just 'popped' in at that point. It may not work for you but it couldn't hurt to try it.
    Jrsy

  • After upgrading to iOS 5, my iPad will not get out of the "configure" screens.

    After the set up screen where I checked "Restore from iTunes Backup" it requests that I connect to iTunes. Once connected to iTunes I can see the iPad on the iTunes screen and it appears to be synching just fine but the iPad just sits on the "Connect to iTunes" screen. I have tried restarting both the iPad and the computer to no avail.

    what happened . I seem to be having the same problem.

  • Nano will not get off ok to disconnect screen, brand new have never used before. is charged and synched.

    help

    Hi,
    I have the same problem. Have you figured out how to fix it? My son has all of his stuff on the ipod.
    Thanks

  • I used the wrong password for my belkin wifi. Now that I know the correct password I can not get pass the unable to connect or join message. I have turned off all the options such as wifi and join and also put my touch to sleep.. but nothing seems to work

    I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message.  I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page.  Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password.  I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that?  Thanks for any input anyone has.

    Yes.  Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
    B-rock

  • I have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page?? please help :-(

    i have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page??
    I do not know the log in details and no longer have that icloud email address !!
    please help :-(

    That's Activation Lock. You will need to remember the Apple ID and password you used to set up the phone.
    If you can't remember them, you can go to iforgot.apple.com to try to recover the information.
    If you are the original owner of the phone & have proof of purchase, you can try calling Apple to see if they can assist also.
    ~Lyssa

  • HT201407 Can not get passed the screen where it asks me for Apple ID and password

    Dear Apple,
         My father and I recently switched our phones because he needed a better phone for business. I now restored the phone and i can not get passed the screen where i need his Apple ID and Passcode. The problem with this is that it would be easy if i knew the Apple ID and password, but my father does not remember any sort of info about his Apple ID or password! Please help me ASAP! Thank you so much for taking the time out of your day for me.
    Sincerely, Paresh
    <Personal Information Removed by Host>

    Do not post your personal information on a public thread - not a good idea.
    If your father does not remember his Apple ID that he set up iCloud and Find My iPhone with, have him go to: FORGOT APPLE ID to retrieve the Apple ID.
    Then follow the prompts to reset the password.
    If he doesn't remember the answers to the Security Questions, contact Apple Support to have them reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Once you know the Apple ID and the password, you will be able to proceed.
    Cheers,
    GB

  • Value in a EIT segment(From Update Page)not getting passed to the Next Page

    Hi
    We have a extended CO to populate an EIT field as per the calculation in CO, on a custom button click.
    Calculated value is stored/displayed in the EIT Update Page.
    On clicking Apply, value is not getting passed to the next page, EIT Main Page and further to store the calcualted value in the EIT table.
    Anyone have faced such problem ?
    Thanks
    Arun

    Hi Gaurav
    Facing problems with put/getSessionValue.
    For the first time in a session, we do not have any issues.
    For next transaction in the same session,
    Variable has the same value even if we go for a next EIT transaction, and replaces this value for the field, without pressing the custom button.
    Thanks
    Arun

  • Urgent help req : work item id not getting passed in the method

    Hi ,
    I have created a subtype zcats of business object CATS and delegated it .
    I have created a new method Approve1 ( with attributes  SYNCRONUS & DIALOG )  in zcats which is similar in coding  to Approve method of CATS ( DIALOG) .
    I have include the method Approve1 of business object zcats in a standard task .
    The problem is that when the eorkflow gets triggered ,  the workitem id is not getting passed in the method APProve1 of zcats.
    Can someone please help me with this .
    Points would surely be awarded .

    BEGIN_METHOD APPROVE1 CHANGING CONTAINER.                 
      DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.              
      DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.                     
      DATA: WORKITEM TYPE SWC_OBJECT.                           
       <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.                     
        SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.         
        SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
        IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.          
          WORKITEMID_IMP = WI_CHCKWI.                           
        ENDIF.                                                  
        CALL FUNCTION 'CATS_WF_APPROVAL'                        
          EXPORTING                                             
            WORKITEMID_IMP = WORKITEMID_IMP                     
          TABLES                                                
            CONT_IMP = CONTAINER.                               
      END_METHOD.                                               
    hi ,
    the above is the code in the method .
    At the first step of execution underlined above , the work item id is appearing blank .
    I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

  • Filters not getting passed in MDX query while using SAP BW with OBIEE

    Hello,
    I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
    Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
    Thanks,
    Rocky

    Hello Sainath,
    We tried those things. But it is still giving same error.
    State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
    The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
    Thanks in advance for help.
    Regards,
    Rocky

  • Pages 2.0 will not get past the "getting started" screen

    i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
    has anyone else experienced something similar?

    Had the same problem. This sovled it for me:
    Just let it load.
    In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
    For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

  • I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore.  If there another way for me to do this?

    I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore.  If there another way for me to do this?  I've tried everything I can find online and of course my coverage has expired and can't call the support team.

    Hello Lara,
    have you already called Apple and explained your current situation, because I don't see a way to downgrade your storage plan with a Mac only running Snow Leopard and without a iOS device running at least iOS 5.
    Best regards.

Maybe you are looking for