HP ML310e ProLiant v2 Gen8 + Универсальное аудио устройство USB

К серверу HP ML310e ProLiant v2 Gen8 подключил аудио устройство USB - работает программа сигнализации объектов, встроенного аудио на материнке нет. Универсальное аудио устройство USB - из USB наушников, наушники отрезаны и перепаяно на настольные динамики.
Всякий раз после "Завершения работы" или "Перезагрузки" сервера значёк "Динамики" на панели задач перечёркнут красным крестиком и звук не работает, хотя в "Диспетчере устройств" в пункте "Звуковые и аудио... устройства" - "Аудио устройство USB" - "Состояние устройства" пишет что "Устройство работает нормально".
Чтобы звук заработал нада каждый раз заходить в "Диспетчер устройств" нажимать "Удалить устройство" потом "Обновить конфигурацию оборудования".
Но простому дежурному персоналу это сделать очень тяжело, они вызывают "компьютерщика" в 3 часа ночи...
Как решить эту проблему, кроме как купить PCI звуковую карту? а может и она так будет работать?

Hi @Konstantin2 ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
Thank you,
George
I work for HP

Similar Messages

HP ML310e ProLiant v2 Gen8 + Universal USB audio device

The server HP ML310e ProLiant v2 Gen8 connected audio device USB - works program alarm objects embedded audio on the motherboard is not. Universal Audio Device USB - from USB headphones, earphones cut and rewire on desktop speakers.
Whenever a "shutdown" or "reboot" server znachёk "Speakers" in the taskbar headlines with a red cross and the sound does not work, although the "Device Manager" in "Sound and audio devices ..." - "Audio Device USB" - "Device status" writes that "the device is working properly."
To the sound of nada earned each time to enter the "Device Manager" click "Remove Device" then "Scan for hardware changes".
But the simple duty personnel to do it very hard, they call "programmer" at 3am ...
How to solve this problem, but to buy a PCI sound card? and maybe she will work?

Hi:
You may also want to post your question on the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VNTXTHk5C9I

HP Proliant DL560 (gen8)

Please advise whom to contact if we need to purchase "HP Proliant DL560 (gen8) Server with the following specifications:
- HP PROLIANT DL560 (GEN8) INTEL XEON E5-4650 (2.7GHZ/8-CORE/20MB/130W) PROCESSOR 20MB(1X20MB) LEVEL3 CACHE, 32GB (4X4GB) PC3L 10600R (DDR3-1333) Registered DIMMS, HP SMART ARRAY P420I/1GB with FBWC(RAID 0/1/1+0/5/5+0/6/6+0), Hard Disk 5X 300GB SAS 10K, Redundant Supply
Qty.: 01
This is required in Saudi Arabia, the local number given for contact here is not being answered.
Please advise.
Thank You.

Hello mikigab,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you have questions about graphics cards and the HP ProLiant DL560 Server. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at HP Enterprise Business Community - ProLiant.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Performance with Dedup on HP ProLiant DL380p Gen8

Hi all,
it is not that i haven't been warned. It is just that i simply do not understand why write performance on the newly created pool ist so horrible...
Hopefully, i'll get some mor advise here. Some basic figures:
The machine is a HP ProLiant DL380p Gen8 with two Intel Xeon E5-2665 CPUs and 128GB Ram.
The storage-pool is made out of 14 900GB SAS 10k disks on two HP H221 SAS HBAs in two HP D2700 storage enclosures.
The System is Solaris 11.1
root@server12:~# zpool status -D datenhalde
pool: datenhalde
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
datenhalde ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c11t5000C5005EE0F5D5d0 ONLINE 0 0 0
c12t5000C5005EDBBB95d0 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
c11t5000C5005EE20251d0 ONLINE 0 0 0
c12t5000C5005ED658F1d0 ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
c11t5000C5005ED80439d0 ONLINE 0 0 0
c12t5000C5005EDB23F1d0 ONLINE 0 0 0
mirror-3 ONLINE 0 0 0
c11t5000C5005EDA2315d0 ONLINE 0 0 0
c12t5000C5005ED6E049d0 ONLINE 0 0 0
mirror-4 ONLINE 0 0 0
c11t5000C5005EDBB289d0 ONLINE 0 0 0
c12t5000C5005EDB9479d0 ONLINE 0 0 0
mirror-5 ONLINE 0 0 0
c11t5000C5005EDD8385d0 ONLINE 0 0 0
c12t5000C5005ED72855d0 ONLINE 0 0 0
mirror-6 ONLINE 0 0 0
c11t5000C5005ED8759Dd0 ONLINE 0 0 0
c12t5000C5005EE3AB59d0 ONLINE 0 0 0
spares
c11t5000C5005ED6CEADd0 AVAIL
c12t5000C5005EDA2CD5d0 AVAIL
errors: No known data errors
DDT entries 5354008, size 292 on disk, 152 in core
bucket allocated referenced
refcnt blocks LSIZE PSIZE DSIZE blocks LSIZE PSIZE DSIZE
1 3,22M 411G 411G 411G 3,22M 411G 411G 411G
2 1,28M 163G 163G 163G 2,93M 374G 374G 374G
4 440K 54,9G 54,9G 54,9G 2,12M 271G 271G 271G
8 140K 17,5G 17,5G 17,5G 1,39M 177G 177G 177G
16 36,1K 4,50G 4,50G 4,50G 689K 85,9G 85,9G 85,9G
32 6,26K 798M 798M 798M 277K 34,4G 34,4G 34,4G
64 1,92K 244M 244M 244M 136K 16,9G 16,9G 16,9G
128 56 6,52M 6,52M 6,52M 10,5K 1,23G 1,23G 1,23G
256 222 27,5M 27,5M 27,5M 71,0K 8,80G 8,80G 8,80G
512 2 256K 256K 256K 1,38K 177M 177M 177M
1K 4 384K 384K 384K 6,00K 612M 612M 612M
4K 1 512 512 512 4,91K 2,45M 2,45M 2,45M
16K 1 128K 128K 128K 24,9K 3,11G 3,11G 3,11G
512K 1 128K 128K 128K 599K 74,9G 74,9G 74,9G
Total 5,11M 652G 652G 652G 11,4M 1,43T 1,43T 1,43T
root@server12:~# zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
datenhalde 5,69T 662G 5,04T 11% 2.22x ONLINE -
root@server12:~# ./arc_summery.pl
System Memory:
Physical RAM: 131021 MB
Free Memory : 18102 MB
LotsFree: 2047 MB
ZFS Tunables (/etc/system):
ARC Size:
Current Size: 101886 MB (arcsize)
Target Size (Adaptive): 103252 MB (c)
Min Size (Hard Limit): 64 MB (zfs_arc_min)
Max Size (Hard Limit): 129997 MB (zfs_arc_max)
ARC Size Breakdown:
Most Recently Used Cache Size: 100% 103252 MB (p)
Most Frequently Used Cache Size: 0% 0 MB (c-p)
ARC Efficency:
Cache Access Total: 124583164
Cache Hit Ratio: 70% 87975485 [Defined State for buffer]
Cache Miss Ratio: 29% 36607679 [Undefined State for Buffer]
REAL Hit Ratio: 103% 128741192 [MRU/MFU Hits Only]
Data Demand Efficiency: 91%
Data Prefetch Efficiency: 29%
CACHE HITS BY CACHE LIST:
Anon: --% Counter Rolled.
Most Recently Used: 74% 65231813 (mru) [ Return Customer ]
Most Frequently Used: 72% 63509379 (mfu) [ Frequent Customer ]
Most Recently Used Ghost: 0% 0 (mru_ghost) [ Return Customer Evicted, Now Back ]
Most Frequently Used Ghost: 0% 0 (mfu_ghost) [ Frequent Customer Evicted, Now Back ]
CACHE HITS BY DATA TYPE:
Demand Data: 15% 13467569
Prefetch Data: 4% 3555720
Demand Metadata: 80% 70648029
Prefetch Metadata: 0% 304167
CACHE MISSES BY DATA TYPE:
Demand Data: 3% 1281154
Prefetch Data: 23% 8429373
Demand Metadata: 73% 26879797
Prefetch Metadata: 0% 17355
root@server12:~# echo "::arc" | mdb -k
hits = 88823429
misses = 37306983
demand_data_hits = 13492752
demand_data_misses = 1281335
demand_metadata_hits = 71470790
demand_metadata_misses = 27578897
prefetch_data_hits = 3555720
prefetch_data_misses = 8429373
prefetch_metadata_hits = 304167
prefetch_metadata_misses = 17378
mru_hits = 66467881
mru_ghost_hits = 0
mfu_hits = 64253247
mfu_ghost_hits = 0
deleted = 41770876
mutex_miss = 172782
hash_elements = 18446744073676992500
hash_elements_max = 18446744073709551615
hash_collisions = 12375174
hash_chains = 18446744073698514699
hash_chain_max = 9
p = 103252 MB
c = 103252 MB
c_min = 64 MB
c_max = 129997 MB
size = 102059 MB
buf_size = 481 MB
data_size = 100652 MB
other_size = 924 MB
l2_hits = 0
l2_misses = 28860232
l2_feeds = 0
l2_rw_clash = 0
l2_read_bytes = 0 MB
l2_write_bytes = 0 MB
l2_writes_sent = 0
l2_writes_done = 0
l2_writes_error = 0
l2_writes_hdr_miss = 0
l2_evict_lock_retry = 0
l2_evict_reading = 0
l2_abort_lowmem = 0
l2_cksum_bad = 0
l2_io_error = 0
l2_hdr_size = 0 MB
memory_throttle_count = 0
meta_used = 1406 MB
meta_max = 1406 MB
meta_limit = 0 MB
arc_no_grow = 1
arc_tempreserve = 0 MB
root@server12:~#
The write-performance is really really slow:
read/write within this pool:
root@server12:/datenhalde/s12test/Bild-DB/Testaktion# /usr/gnu/bin/dd if=Test.tif of=Test2.tif
1885030+1 records in
1885030+1 records out
965135496 bytes (965 MB) copied, 145,923 s, 6,6 MB/s
read from this pool and write to the root-pool:
root@server12:/datenhalde/s12test/Bild-DB/Testaktion# /usr/gnu/bin/dd if=Test.tif of=/tmp/Test2.tif
1885030+1 records in
1885030+1 records out
965135496 bytes (965 MB) copied, 9,51183 s, 101 MB/s
root@server12:/datenhalde/s12test/Bild-DB/Testaktion# /usr/gnu/bin/dd if=FS2013_Fashionation_Beach_06.tif of=FS2013_Test.tif
I just do not get this. Why is it that slow? Am i missing any tunable parameters? From the above figures the ddt should use 5354008*152=776MB in RAM. That should fit easily.
Sorry for the longish post, but i really need some help here, because the real data with much higher dedup ratio is still to be copied to that pool.
Compression is no real alternative, because most of the data will be compressed images and i don't expect to see great compression ratios.
TIA and kind regards,
Tom
Edited by: vigtom on 16.04.2013 07:51

Hi Cindy,
thanks for answering :)
Isn't the tunable parameter "arc_meta_limit" obsolete in Solaris 11?
Before Solaris 11 you could tune arc_meta_limit by setting something reasonable in /etc/system with "set zfs:zfs_arc_meta_limit=...." which - at boot - is copied into arc_c_max overriding the default setting.
On this Solaris 11.1 c_max is already maxed out to "kstat -p zfs:0:arcstats:c_max -> zfs:0:arcstats:c_max 136312127488" without any tunig. This is also reflected by the parameter "meta_limit = 0". Am i missing something here?
When looking at the output of "echo "::arc" | mdb -k" i see the values of "meta_used", "meta_max" and "meta_limit". I understand these as "memory used for metadata right now", "max memory used for metadata in the past" and "theoretical limit of memory used for metadata" with an value of "0" as "unlimited". Right?
What exactly is "arc_no_grow = 1" saying here?
Sorry for maybe asking some silly questions. This is all a bit frustrating ;)
When disabling dedup on the pool write performance is increasing almost instantly. I did not test it long enough to get real figures. I'll probably do this (eventually even with Solaris 10) tomorrow.
Would Oracle be willing to help me out under a support plan when running Solaris 11.1 on a machine which is certified for Solars 10 only?
Thanks again and kind regards,
Tom

Proliant DL380p Gen8 drivers

I'm trying to download the network adapter drivers for the proliant 380p gen8 from this link:
http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=DL380p&searchtype=s-002
no matter what I try it say that the site is not available. Please advise. Thank you
This question was solved.
View Solution.

Hi @Buckeyecu ,
I understand you are experiencing issues when trying to access the link you have provided in your post. Please retry this link.
http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=DL380p&searchtype=s-002
Regards,
George
I work for HP

ProLiant MicroServer Gen8 + 32GB RAM Bios Fix

Hi all. I have bought a ProLiant MicroServer Gen8 and wondering why the spec the ram is limited to 16GB RAM.
The chipset and CPU support up to 32GB RAM. The MicroServer has 2 DIMM Slots and 16GB RAM modul exsist.
I asked the memory company Intelligent Memory and asked if 32GB udimm will supported.
The Support answered me that the 16GB Ram limit is a restriction set by HP in the Bios.
Could you please remove this limitation / restriction from BIOS?
Lot of Customers have this wish because they use for Homelab for Study (Exchange, Sharepoint etc) Only Exchange already consume 8GB Ram and Sharepoint is recomend 12 GB)
Kind Regards
Rene

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP ProLiant Microserver Gen8 RAID 1 configuration

Hi all, I'm not sure If I post this message in correct topic of this forum, if not, I'm sorry. I've an HP MicroServer Gen8 and I'm very happy with. But for security reasons I want to mirrored the two drives to RAID1.It's for me along time ago to configuring RAID and I forget things quickly. I use this server for private and office use. I have two hard drive froms 500GB (I bought a new second disk). I saw that the HP Dynamic Smart Array was not enabled in the first boot sequence when I start the server. So I go to BIOS for setup. I followed this vid: https://www.youtube.com/watch?v=QSQWJCbvpAA (from HP, the uploader is someone else btw) When I was in the BIOS I go to:1 System options2 SATA Controller Options3 And then Embbed SATA configution4 I get an warning message pop-up, when I want to enable and I press on enter (I followed exactly the tutorial on youtube)5 Enable Dynamic HP Smart Array B120i RAID Support -> I press on enter6 Then I go to Advanced Options and press on Advanced System ROM Options and I enable the Virtual Install Disk7 I go look back on System Options if I see now that the Dynamic HP Smart Array B120i RAID Support is enabled, but I didn't see it. Small info: I see under PCI Device enable/disable that the Dynamic HP Smart Array is enabled. But Why I cant see it under System Options? In the video is ROM - BASED Setup utility, Version 3.00Copyright 1982, 2012 Hewlett-Packard Development Company, L.P.And in this server is :ROM - BASED Setup utility, Version 3.00Copyright 1982, 2014 Hewlett-Packard Development Company, L.P. Maybe it's changed. I don't know. I'm stuck. Missed I an feature that I need to enable in the Bios setting? I'm known well in BIOS. But the RAID configuration is a bit drained away...Can anyone help me further? Thanks in advance! Sincerly,Blusion.

Hi: You may also want to post your question on the HP Enterprise Business Community Support Forum -- Proliant Servers section. http://h30499.www3.hp.com/t5/ProLiant/ct-p/proliant

Problem during installation in HP Proliant DL380P Gen8

Dear All,
We have HP Proliant DL 380P Gen8 machine, i am facing some issue during installation oracle linux ver 5, please help me regaring the following points;
1. Is this machine compatible to install Oracle Linum Software?
2. If yes, then we have faced attached error; please guide me to resolve it;
Regards,
Akhtar

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VQGkMHl0y9I

HP ProLiant MicroServer Gen8 G1610T

Right now I`m trying to install windows server 2012 essentials .The Installation works on a single disk but whenever i configure a raid 1 I don`t see any storage device in the windows when I will be asked where to install the system a disk at all. Obviously the system has no driver installed for the above mentioned combination.How can I get a driver for the raid system ?As I bought the system via Ebay to replace another Server I dont have any disks etc.

Hi:
You may also want to post your question on the HP Business Support Forum -- Proliant Servers section.
http://h30499.www3.hp.com/t5/ProLiant/ct-p/proliant

ProLiant DL360p Gen8 problem with java/oracle

we are using OPERA PMS in a new single server , windows server 2008 r2 x64. From the first day we are getting these 2 weird errors ( attached )
I have tried re-install network cards,changing cables,re-installing java,disabling antivirus,changing networkretries=30 on oracle etc
is it hardware or software problem u think?
p.s. having problems uploading photos....
http://tinypic.com/r/a0gb9h/5
http://tinypic.com/r/2mqrfav/5

contact the software vendor

Installning Ubuntu 14.04 on Proliant Microserver Gen8 G1610T

I recently bought a HP Proliant Microserver Gen8 G1610T. I have outfitted it with one 500GB WD Black drive (slot 1) and one 6TB WD Red drive (slot 2) along with an extra 4 GB Kingston 1600 memory. Now I am trying to install Ubuntu Server 14.04 LTS without much success. I am new to both servers and Ubuntu.
I am installing Ubuntu through a USB since the server lacks a optical drive. I have made a USB installation stick through pendrive. I intend to install Ubuntu on my 500GB disk and use the 6TB disk as storage. In the future I will add additional 6TB disks as need arises.
Since I am new to both servers and Ubuntu, I would appreciate if someone could give me a detailed installation guide on a newbielevel on how to install and configurate Ubuntu. Once the operating system is installed, configurated and updated and all necessary HP drivers installed and updated, I intend to install Samba and Plex Media Server along with some program to facilitate remote administration from my windows 7 notebook.
I have tried installing Ubuntu on my own to the best of my ability and through googling but ran into trouble almost directly. I have not changed or fiddled with any of the BIOS-settings or other settings when trying to install. The installation attempts were made on "out-of-box"-settings. First I inserted the USB, then started the server. After booting (F11) to USB, I get the main installation screen, where I choose Install Ubuntu. As soon as I get to the automatic network configuration I run in to trouble. The installation fails to automatically configurate DHCP, no matter which Broadcom option (em1 or em2) I choose. At this point, I have aborted the installation. I have not managed to solve this issue. The installation attempt was done both with the network cable not attached and attached.
Also, during my googling, I have read that this particular server does not support Ubuntu 14.04 and that the B120i needs updating with special drivers in order to work and to reduce fan noise. I would like to know how to do this, preferably in an easy step-by-step solution. I have downloaded the hpvsa (trusty version) and tried to make a driver injector usb through Windows 7 and the diskpart program without success. Don't know how if the USB injector turned out OK and how, and in what order, to use it to update the drivers.
Phew. Lots to do and lacking in knowledge to do so I would appreciate all the help I can get! Thanks

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

ProLiant Gen8 freezes during installation

Hi all,
I just got a brand new Proliant Gen8 G1610T.
Tried to perform the initial system setup according to the ProLiant MicroServer Gen8 Setup Poster. As I came to step 6 to activate Intelligent Provisioning the system does not go any further than the splash screen.
The loading indicator is "full".
Can anybody tell me what's wrong?

Hi:
You may also want to post your question on the HP Business Support Forum - Proliant Servers section.
http://h30499.www3.hp.com/t5/ProLiant/ct-p/proliant

Having issues with getting SQL Server Express to start services and run.

Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

Microsoft Word 2013 Documents open as full version documents on two computers sporadically

Hello,
We have a customer site with a perplexing problem that occurs very sporadically.
Our customer has a large word document called “Green Book” that tracks all customer jobs, new, pending and completed in a large tabled document that can sometimes span up to 300 pages. Yes we are aware we probably should convince the customer to run an Access
database but have not had the expertise in-house to date to date to do this but that is off the scope of this topic for now….
The problem that is driving our customer (and us) nuts is that user A will open Green book quite happily, user B will turn up to work some 3 hours later and get a full read / write version of the document. If user B opens up the document immediately or within
a few minutes of user A the document will predicably come up with a “this document is in use by user xx” and give the end user an option to open the document as read only which would be fine if only this would work that way every time. Having a second
user open Green book inadvertently as read / write creates pandemonium when two users have conflicting edits to the document as they both think they have the original.
Every time our techs have been onsite we’ve been unable actually reproduce the problem for ourselves mainly because we seldom get three spare hours to wait and the office is flat out during business hours with end users reluctant to spare their machines
at the best of times…
The problem extends only to this file, no connectivity problems to other files, email or internet surfing have ever been reported so can only assume the core network is solid.
In a nutshell here is a summary of our customer’s network configuration that was part of a network upgrade done at the beginning of May this year:
N.B. all hardware (BIOS / firmware), operating systems and software has all been patched up to the latest possible versions both on desktop and server level.
HP Proliant ML350 Gen8 Server – 48 GB RAM, 2 TB RAID 10 10K SAS drives on a smart Array P400i
HP server runs Microsoft HyperV 2012 R2 (latest updates applied) and runs two guest OS:
SBS 2011 Server (32 GB RAM) that acts as File Server (that originally shared Green Book) / Exchange server
Windows Server 2012 R2 – RDS / Terminal Server (12 GB RAM) (this server now shares Green book)
Trend Micro Worry Free Advanced Version 9.0 in use with real time scan disabled on servers but enabled on desktops.
New late model HP Procurve Gigabit switch installed.
Desktop Computers are HP EliteDesk 8300 Computers running Windows 8.1 Pro / Office 2013 Home and Business on 4 GB RAM.
In a nutshell here is a summary of the troubleshooting steps / workarounds all unsuccessfully attempted to date:
Ensured Green Book from is saved in latest DOCX format not legacy .DOC format
Turned off server auto-disconnect (done on server not workstations) after 15 minutes feature on Windows server to rule out disconnected sessions giving User B’s computer a false impression it is the only user with access to Green Book
http:// Support.microsoft. com/kb/297684
With above setting in effect I’ve instructed an end user to leave a document open for over an hour and do a
net files command on the SBS file server to confirm that user A still had a session lock on that file (which they did) to rule out a disconnect giving user B’s computer a false impression it had an exclusive access lock on the file.
Opportunistic locking on server has been disabled.
Setup a dedicated server with a connection limit of one user at a time to each of these “sensitive files”. Quickly abandoned this as it was more trouble than it was worth getting user to close Word to release file lock despite document being closed.
Moving Green book from SBS server to a shared folder on Windows 2012 R2 terminal server (no auto disconnect parameter set). Still has the same problem!
In desperation I’ve setup remote desktops for all affected users and put shortcuts on desktop a local C drive copy of Green book. Because it looks different to their desktop and Word is slow anyway users objected and I was forced to allow end users again
to open green book again from their individual servers.
What did the customer run before and what were the issues with Green Book?
Customer ran a Dell PowerEdge T300 Server with 8 GB of RAM and 600 GB mirrored SATA drives on SBS 2008 and Dell workstations running Windows XP SP3 / Office 2007.
Green Book was always slow because of Word being very slow with 300 + pages of tabled information.
No file sharing / locking issue as reported above was ever reported.
If anyone can share any experiences on this or shed any light on the problem we would be eternally grateful…

I quoted this from your cross-post, by MVP Paul Edstein.
"Your description suggests a network problem, with the
networking software losing track of the fact the file is already
open.
That said, you might find it useful to store documents intended for
shared editing in a OneDrive folder. This is designed to allow two or more
people can edit a word document concurrently.
Once you have OneDrive
operational, click OneDrive in the header of a SharePoint or Office 365 site,
then click the ellipsis (…) to the right of the entry. Then click ‘Share’ and
invite the other user to view or edit the document, and click ‘Share’ once more.
To add to the list of people already sharing a document, click the ‘Shared with’
icon in the ‘Sharing’ column and invite the additional person to view or edit
the document, and click ‘Share’ once more.
When someone invites you to
share a document, you’ll typically receive an email notification with a link to
the document. Clicking the link opens the document. If you have edit permission,
your changes are automatically saved.
For more info, see:
http://office.microsoft.com/en-us/sh...102772333.aspx "

HP ML310e ProLiant v2 Gen8 + Универсальное аудио устройство USB

Similar Messages

Maybe you are looking for