Hp mobile workstation hardware upgrading

Does hp elite 8540w Intel® Core™ i7 CPU Q 740 @ 1.73GHz can support 3ds max 2011, 2012 and 2013 for rendering job???
If this mobile workstation labtop can be able to upgrade to Intel® Core™ i7 CPU Q 820 @ 1.73GHz or higher speed /more GHz...???
Please let me know and what will be the cost for upgrading the parts and details
Thanks a lot.

Thanks for the reply; appreciate it.
I will rephrase, just to clarify my understanding.
So, you are basically saying that:
1. Volts should always match (No More/No Less or else components are in danger)
2. Amperes should at least meet the minimum requirement (More amperes would not cause any issues)
Thanks for sharing the Maintenance Guide. You also shared the Part Numbers of Adapters that are supported. I did a little search and found following against each Part Number:
613158-001
613159-001
Although, I could not find anything with respect to above Part Numbers on HP Site which would have made it very easy to match the Volts and Amperes of the Adapter that I have, but above were shown as results of respective Part Numbers in ebay. My Adapter matches perfectly with the second Part Number (19.5 Volts/11.8 Amperes), so would it be safe to conclude that my Adapter is supported by the Notebook.
With respect to Battery, 14.8 V/5200 mAH and 14.8V/4800 mAH are supported for this Notebook. Would a 14.4V/4400 mAH be supported or workable on this Notebook? (Please note the difference of 0.4 V)
Thanks in advance.

Similar Messages

(Resolved) HP ZBook 17 Mobile Workstation problems

Unable to encode video pass 14 minutes. File, Qt reference or Quicktime same as source yeilds the very same results. I have also tried TMPGENC with the same results. I am using Sorenson Squeeze 9 pro and Avid Media Composer 8.3. I have 16gigs of memory. Could there be something wrong with the computer? I purchased it several weeks ago refurbished.
I resolved the issue I worked on for a minimum of 6 hours per day for the last week. It turned out to not be hardware related, but Sorenson Squeeze 9 pro.

I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
HP ZBook 15 Mobile Workstation Support
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

About Hardware Upgrades on EliteBook 8560w

Hi. Can I use the HP 1TB SATA 7200rpm Hard Drive(L3M56AA) or only the HP 256GB SSD M.2 2260 PCIe drive(L3M57AA) to upgrade my laptop. Thanks !

Hello According the specifications you could use both. In both specs HP ZBook 14/15/17 Mobile Workstations is showed, in your 8460w only in L3M57AA. The official info the suggests parts are:750 GB, 7200 rpm 633252-001
500 GB, 7200 rpm 634926-001
320 GB, 7200 rpm, Self Encrypting 626978-001
320 GB, 7200 rpm 641672-001256 GB solid-state drive 653435-001
128 GB solid-state drive 653434-001 Your notebook will loose battery autonomy with 1TB HDD. I suggests you to use low capacity HDD/SSD and buy an external HDD due is better keep the data (personal) out of notebook for safety proposal, HDD could fail, notebook could be stollen... Resume: The best solution is HP 256GB SSD M.2 2260 PCIe drive(L3M57AA) plus external HDD (not SSD) Regards

MSI mobile workstation is solution partner of Solidworks.

MSI is officially certified solution partner with Solidworks now.
MSI Mobile Workstations is dedicated to delivering astonishing performance and reliability for professional software applications providing graphics performance with NVIDIA Quadro GPU, innovative features and fast storage configurations. Solidworks delivers powerful products cover the design process—from design and validation to technical communications and data management.
MSI works together with Solidworks to deliver solutions that leverage hardware compute power and software functionality. We believe we can generate synergy in MSI mobile workstation solution.
For more information:http://www.solidworks.com/sw/products/details.htm?productid=5204

Just had a try in the only MSI Gaming flagship store in Sytrend. WS60 is just beautiful, glad there's one stylish powerful workstation in the market.

Design logo for MSI Mobile Workstation (Congrats to all contest winners )

•Object : Design logo for MSI Mobile Workstation
•Eligibility : Open to all creative artists
•Deadline : Dec. 19, 2013.
•Prizes :
Winner will be selected by MSI Jury. Facebook fans can vote for their favorite artwork from Dec. 20, 2013 to Feb. 5, 2014. Announcement of the winners: on Feb. 6, 2014 via MSI workstation website, facebook page and by direct contact to winner’s email address; therefore please provide your real name and valid email address. Contest winners will receive notice of his or her win within thirty (30) working days after the event ends. MSI reserves the right to change the prizes to any products which have equivalent market value. Should the winners fail to abide by the terms and conditions of these Complete Official Rules, MSI reserves itself the right not to pay the Grand Prize winner for his/her submitted and accepted pieces of art, and shall disengage itself from all commitments relating to the winners and their prizes, in its discretion.
o1st prize : MSI Chosen Logo, picked by MSI Jury.
o2nd prize : Facebook fans favorite pick, calculated by Facebook “likes” each logo receives.
o3rd to 5th prizes : Winner of the week, pick one winner bi-weekly by MSI jury & MSI partners.
P.S
1、MSI reserves the right to amend the Rules of the Event without further notice or interpretation, but will make a public announcement in advance.
2、MSI Mobile Workstation Facebook: https://www.facebook.com/msiworkstation
3、MSI Mobile Workstation official site: http://workstations.msi.com/

[MSI Workstation Announcement]
Thanks everyone's contribution! The final round winner announcement is released today. Congrats to all contest winners
1st: No. 67 Carbon Fiber MSI: completely represents MSI Workstation spirit with high quality design element under the contest design guideline
2nd: No. 209 MSI Core Shield: with almost 8k strong Facebook fans like power
3rd: No. 135 Empowered Your Victory
4th: No. 150 MSI Firebird
5th: No. 10 The Hive
MSI will contact all contest winners after the contest finishes. All contest winners must provide a correct ID copy and sign an intellectual property rights guarantee letter guaranteeing originality and non-infringement of submitted work to MSI after MSI announces contest winners. MSI reserves the right to not select a winner if the winner cannot provide the above mentioned documents. Further question please refer to: http://event.msi.com/nb/2013/logo/

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

Mac Pro Thunderbolt, USB3, etc. hardware upgrades...

Feeling a bit left out in 2 years since I bought my Mac Pro with no real hardware upgrades for my Mac Pro.
Can anyone comment on what they've done to keep their Mac Pro updated with the latest?
- Thunderbolt. I was surprised this wasn't in the updated 2012 Mac Pro. Has anyone heard of any third party thunderbolt cards? I've gone ahead and purchased a Thunderbolt hard drive for my Mac Book Air that also has a FireWire 800 port. I'm planning on using Apple's Thunderbolt to FireWire adapter (intended for MBA and MBP laptops) in reverse and use the adapter on the Thunderbolt hard drive to connect it to my Mac Pro tower's FireWire 800 port. At least this way when Thunderbolt does arrive for us I can just stop using the adapter. Apple genius said this should work, but I guess the proof will be when I go to copy lots of data (something Macs already struggle with) http://store.apple.com/us/product/MD464ZM/A
- USB 3.0. Has anyone found a good reliable USB 3.0 card for the Mac Pro? Again I was surprised Apple left this out of the 2012 refresh. I like the faster speeds over FireWire 800 and if folks have found a good working USB 3.0 card that works I'll gladly put one in my tower. I looked at the La Cie USB 3 PCI add on card, but haven't heard anything about native support for it from Apple. http://www.lacie.com/products/product.htm?id=10493
- Display card. Anyone have recommendations on a better display card than the default one Apple shipped? Apple's original ATi Radeon HD 5770 works like crap with HDMI (mini display port or DVI), especially to my new Samsung 27" HDMI monitor. I'd love to get a new Apple Thunderbolt Display and refuse to buy the antiquated Apple Cinema Display. Seeing Apple's new Mac Mini with both HDMI and Thunderbolt gives me hope, but the Intel HD Graphics 4000 chipset seems pathetic. I did like that Apple gave the new iMac a NVIDIA Kepler GPU so maybe there is hope for the Mac Pro yet.
- Anyone find anything useful to put in the extra optical drive slot? The dream of a BlueRay recorder with Lightscribe support and Mac drivers seems long dead. I'd love to see some innovation like a removable SSD drive bay or something better than the coffee cup holder it has become.
Ramblings on what has and hasn't been working for me...
If there are Mac Pro users who like to work in the dark I would highly recommend the Moshi Luna backlighted keyboard. It works great and allows me to video edit without having to strain my eyes with uncessary room lights in order to see the keyboard. It sure beats the USB powered LED I was using to shine a light on Apple's extended keyboard! I still have to switch from Apple's Magic Trackpad to Magic Mouse when I bootcamp to Windows 7 (the trackpad drivers are not robust enough under Windows unless someone has found a solution).
I also ran into a horrific issue with Paragon's HFS+ Win 7 drivers hosing my Mac drives when I tried to use Sony's PMB software to copy HD movies to my Mac drives (NEVER AGAIN).
Any thoughts you have I'd love to hear!

Asus makes a card but it only works with certain motherboards made by them. Doesn't exactly have to be installed 'at the factory' but could be interpreted as such.
Until I start seeing PCIe graphics cards that support Thunderbolt either directly with a Thunderbolt connector on the card or an internal Display Port to Thunderbolt connector I'm not sure I would want a display that connects only with Thunderbolt.
HDMI and Display Port is well tested technology. Many displays are available.
Limited (i.e. none to my knowledge) options at this time for discreet graphics cards that support Thunderbolt. So either you use either the Intel integrated graphics chipset (low performance) for video or a non-Thunderbolt display with a discreet graphics card.
If you daisy chain devices you have to share the bandwidth much like you do with Firewire.
Thunderbolt is great for laptops a small footprint computers because it extends the PCIe architecture outside of the computer giving you the option of using higher data capacities associated with PCIe. But since Mac Pros already have four PCIe slots why would you want to use up 4 PCIe lanes for a dedicated interface that is still in it's infancy?

Mobile workstation needs

Hello all, Im new to the Adobe forum and have some questions regarding mobile workstation needs. I have grown very accustomed to using laptops and in the next month going to acquire a new machine.
First off all, I dont want to offend those that use Macs, but I love Windows based systems. I have used both, but I am the most comfortable with with win 7.
He is s a little background, I have used Alienware MX17 and DELL MX17 XPS for a few years, the Alienware crapped out a year or so ago and the XPS is still running well, but Im finding its slow. I do a lot of post editing for others and a lot of my own images. My files are averaging 300MB + and sometimes up to a GB. I use mostly PSCS6 and some NIK software and a couple Alienskin plugins.
I have all my files kept on ext drives, so my needs are to maximize performance and stability.
I was thinking of another Alienware, but looking into EUROCOM , Malibal, Lenovo, HP, Origin, Sager.   My main concerns are fast processors : Intel i7 extreme or the Xeon. I want to max out the RAM at 34gb. I also know I need the best NVidia graphics , such as the 8800 SLI cards.
If anyone has suggestions that I am not looking at, or help in deciding on a machine. I am mostly concerned with customer service/ after purchase care, good construction, and last but not least, I like a nice , simple, elegant, black case. I know it will be a beefy machine, and I need 17" displays.
Thank you, for any help !!!

Well, I thought Id update, just in case there is "anyone" that has been sitting on the edge of their seat. (sure)
After a lot of "loving ridicule" from my Sons, I decided on the Eurocom.
What I have now:
Dell XPS MX 1730   Mobile Workstation
4GB RAM
2 X 512GB 800 series graphics
Intel core 2 Duo
2 x 750GB 7200 RPM Seagates HD
Win 7 home premium
BLAH, BLAH etc
Coming next week:
EUROCOM Panther 5 Mobile Workstation
Intel i7 4660 Extreme
32GB RAM
Nvidia 8GB GTX 980M 1536 CUDA
2 x 1TB SSD Samsung EVO
Win 7 home Prem
BLAH, BLAH
Now, Im hoping that Im not expecting too much of a difference in Photoshop performance. I hope its not " Oh, this kinda faster"....... Im not expecting to have my "mind blown" but I just hope I dont feel like I spent so much and get a mediocre experience.
I should see a good amount of difference?
Now a bit of backstory as to WHY Im being so extravagant.
Ive been living in a financial, physical, emotional and psychological HELL these last 5 years..... Im finally seeing a bit of a light, got in some money, nothing outrageous, certainly nothing compared to what I used to make ( technically, poverty level, but an income, none the less)
I have been dealing with second hand systems after my beloved Alienware died. So I felt since Ive been in the same clothes, nothing new to wear, tattered everything, I DESERVED this.   I just hope I made a good decision on the company. I care about "aftercare" a LOT. Since I tend to constantly buy the 1 in a billion whatever item that will be defective.

Can I make any hardware upgrade to make my Mac Pro1,1 compatible with OS X Mavericks?

Hi!
I have got a Mac Pro1,1 Dual-Core Intel Xeon, 2,66 GHz, 11 Gb RAM running OS X 10.7.5.
I would like to know if there is any chance to make any hardware upgrade to make my Mac Pro compatible with Mavericks, maybe a Processor upgrade.
I miss all the synchronization features, iMessage and all the goodies Mavericks brought
Thank you very much!

I'm sorry you can't. Because it has a 32bit EFI. To run Mountain Lion or Mavericks the Mac needs a 64bit EFI.

Windows 7 prof 64bit , EliteBook 8540W Mobile Workstation not detecting all my expandable RAM

Recently (2 week back) I got my hp Elitebook 8540w mobile workstation,
by dafault came with
Windows 7 professional 64Bit,
iCore 7 Q740 @1.73Ghz
4GB Ram
nVidia QFx 880M
this week I have received two RAM(4GB each) from hp.
I have placed those RAMs on expandable memory board and restarted the laptop but laptop didnt recognize both the RAMs (4 GB x 2 ).
Please help to resolve this issue.

I've paid for support from Apple for same issue. No solution yet. It's about a month.

Compaq hw9440 mobile workstation recovery

HiI need recovery for my Compaq hw9440 mobile workstation with XP Professtional.Operation system on drive c: not working properly.I dont have recovery CD.I downloaded sp37632.exe, but installation process cancelled with error==============TITLE: HP Backup and Recovery Manager for Windows XPVERSION: 2.4.3 REV: G
DESCRIPTION:
Hp Backup and Recovery Manager provides end-user backup, and one-touch
recovery. This is an end-user installable version that is also suitable for
pre-install delivery. This version features support for the HP 3 in 1 Docking
SystemPURPOSE: Routine
SoftPaq NUMBER: SP37632
EFFECTIVE DATE: 15 October 2007
CATEGORY: Software - Solutions
SSM SUPPORTED: YESDEVICES SUPPORTED: N/A
ENHANCEMENTS:
This release integrates DVD Dual Layer burning support for end-user install and preinstall only.FIXES:
PREREQUISITES: NoneHOW TO USE:
1. Download the SoftPaq .EXE file to a directory on your hard drive.2. Execute the downloaded file and follow the on-screen instructions.Copyright (c) 2007 Hewlett-Packard Development Company, L.P.=================================== Package extraction - OK ====ERROR MESSAGE====Код ошибки: -5003 : 0x20
Сведения об ошибке:
>SetupDLL\SetupDLL.cpp (1057)
PAPP:HP User Installer mPC - on air
PVENDOR:Hewlett-Packard Company (http://www.hp.com)
PGUID:3F9F7336-6DF8-476F-ABF6-C70A17FAF619
$10.1.0.238
@Windows XP Service Pack 3 (2600) BT_OTHER 232.64============Can I recover my HW9440 by another way ? With best regards Andrey

Hi,
This is a list of processors supported from day one:
Intel Core 2 Duo Processor T9500 (2.60 GHz, 6 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T9300 (2.50 GHz, 6 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T8300 (2.40 GHz, 3 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T7800 (2.60 GHz, 4 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T7700 (2.40 GHz, 4 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T7500 (2.20 GHz, 4 MB L2 cache, 800 MHz FSB)*
Intel Core 2 Duo Processor T7300 (2.00 GHz, 4 MB L2 cache, 800 MHz FSB)*
The T9900 appeared after that but it is in the same family and this should fit.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Macbook Pro hardware upgrade limitations ?

I have a Macbook Pro model A1211, 15inch, 2.33Ghz. I am very happy with the performance, but I was wondering what hardware upgrades may be possible in the future, such as the ATI video, audio, HD, etc.
Regards,
David Mitchell

Your only upgrades are RAM (user replaceable) and HD (not user replaceable) as well as anything you can stick in the ExpressCard/34 slot.

Are UCS hardware upgrades service disruptive?

Hi Community,
Is fabric interconnect hardware upgrade from dual (clustered) 6120XP to dual 6248 service disruptive?
Is adding a new 5108 chassis to the existing UCS configuration with dual 6120XP service disruptive?

Thanks Kenny.
1). I have actually been using this document for my project, and I think I worked out a pretty good migration plan based on it, but there are some grey areas/questions, MARKED IN BOLD CAPS. Could you clarify them for me?
Step 1 Upgrade UCS firmware across all the devices to the same version - 2.1(1f). THE NEW 6248S CAN BE TEMPORARY CONFIGURED AS STANDALONE OR IN A CLUSTER FOR THE FIRMWARE UPGRADE, AND THEN THE CONFIGURATION SHOULD BE WIPED OUT AND THE FABRIC INTERCONNECTS POWERED OFF.
Step 2 Using either the UCS manager CLI or GUI, verify the state (subordinate or active) of the existing (production) fabric interconnects.
!!! Step 3 Back up the software configuration information and the UCS Manager software !!!
Step 4 Disable the server ports on the subordinate fabric interconnect – NEW or EXISTING? THIS STEP IS CONFUSING AND IT IS REFERENCED IN STEP 17.
Step 5 Power down the EXISTING subordinate fabric interconnect by unplugging it from the power source. If you are monitoring the upgrade using a KVM session, you may need to reconnect the KVM session when you power down the fabric interconnect.
THE NEW FABRIC INTERCONNECT(S) SHOULD BE POWERED OFF AT THIS POINT
Step 6 Disconnect the cables running from the chassis IO Modules to the subordinate fabric interconnect ports in slot 1 (the old EXISTING fabric interconnect).
Step 7 Connect these cables into the corresponding ports in slot 1 on one of the new Cisco UCS 6248 UP fabric interconnect, using the connection records to preserve the port mapping and the configured server pinning.
See Fabric Interconnect Port Connection Record, on page 7.
See Fabric Interconnect Upgrade Considerations, on page 1.
Step 8 Disconnect the L1/L2, M1 management, and Console cables on the old fabric interconnect. The ports for these connections are on the opposite side of the interconnect, so if your cables are just barely long enough to connect two rack-adjacent UCS 6120 interconnects you will probably need new cables.
Step 9 Connect the M1 management, and Console cables to the new Cisco UCS 6248 UP.
Step 10 Connect the L1/L2 cables that were disconnected to the new Cisco UCS 6248 UP. L1 connects to L1, L2 connects to L2.
Step 11 Disconnect the Ethernet or FC cables from slot 2 of the old fabric interconnect.
Step 12 Connect the Ethernet or FC cables to the corresponding ports in slot 2 of the new Cisco UCS 6248 UP. Some may go to slot 1, depending on the mappings planned out earlier in the process
I HAVE NO SLOT 2 ON THE NEW FABRIC INTERCONNECTS ON THE OLD ONES, SIX PORTS IN SLOT 2 ARE CONFIGURED AS FIBER CHANNEL PORTS. WILL I NEED TO MANUALLY CONFIGURE LAST SIX PORTS AS FC PORTS? IF YES, AT WHAT STEP IS THIS CONFIGURATION DONE, AND ARE THE FIBER CHANNEL CABLES SUPPOSED TO BE PLUGGED IN BEFORE OR AFTER THE PORTS ARE CONFIGURED AS FC PORTS?
Step 13 Connect the power to the new Cisco UCS 6248 UP, it will automatically boot and run POST tests.
Important: Directly connect the console cable to a terminal and observe the boot sequence. You should at some point see the Basic System Configuration Dialog, where you will configure the switch as a subordinate interconnect. - IS THIS THE WIZARD THAT RUNS ON EVERY UNCONFIGURED FABRIC INTERCONNECT WHEN YOU POWER IT ON, WHEN YOU HAVE TO GIVE IP, NAME, DNS, ETC.? CAN I USE THE SAME IP THAT WAS ON THE OLD FABRIC INTERCONNECT?
If you do not see this dialog, you either have different builds of software on your old primary and new subordinate, or the new subordinate has previously been part of a cluster and will need to have all configuration information wiped before it can be added to a cluster as a subordinate. In either case, immediately disconnect the L1 and L2 connections and complete the bringup as a standalone fabric interconnect, then correct the issue before proceeding further.
I AM NOT SURE IF THE NEXT STEP IS APPLICABLE TO ME AT ALL, AS I DO NOT HAVE N10-E0440, I HAVE N10-E0060. COULD YOU COMMENT ON THIS?
Step 14 (Optional) Remap UCS 6100 fabric interconnect FC ports 2/1 to 2/4 on a N10-E0440 expansion module or any slot 3 ports onto the new fabric interconnect expansion module.
a) Use UCS Manager to delete the ports on the subordinate fabric interconnect that you will need to move within the configuration - WHERER DO I DELETE THE PORTS - ON THE NEW ONE?
b) For each port you have just deleted, create new ports on either slot 1 or slot 2. These ports must use the same port type definitions as the old ports, but will use different port numbers.
c) For recently moved Ethernet server ports, reconfigure the associated service profile to use the new port number for the appropriate LAN pin group.
d) For recently moved uplink Ethernet ports, reconfigure the port channel settings to use the new ports.
e) For recently moved uplink FC ports, reconfigure the associated service profile SAN pin group to use the new ports.
f) Re-acknowledge chassis for blade servers and fabric extender for rack servers.
This will be disruptive to traffic, but is necessary in this specific scenario. DO I LOOSE CONNECTIVITY FOR THE ENTIRE CHASSIS, OR JUST ONE FABRIC?
Step 15 The new subordinate fabric interconnect will automatically synchronize the configuration and database/state information from the primary fabric interconnect. Synchronization between primary and subordinate fabric interconnects can take several minutes. The port configuration is copied from the subordinate switch to the new hardware.
Step 16 Verify that the data path is ready.
See Verifying that the Data Path is Ready.
Make sure all faults are resolved before proceeding.
a) Verify and if necessary reconfigure the SAN pin group for FC ports in the associated service profile.
b) Verify and if necessary reconfigure the LAN pin group for Ethernet ports in the associated service profile.
c) Verify and if necessary reconfigure the port channel for uplink Ethernet ports.
THE FOLLOWING STEP IS ALSO CONFUSING. IF IT IS TALKING ABOUT THE OLD SUBORDINATE FABRIC INTERCONNECT THAT IS BEING REPLACED, WHY DO WE NEED TO ENABLE THE SERVER PORTS ON IT, THERE IS NOTHING CONNECTED TO IT. IF IT IS TALKING ABOUT THE NEW ONE - 6248, THEN, IT MEANS THEY HAVE TO BE DISABLED IN STEP 4, BUT IT MAKES NO SENSE, BECAUSE THEY ARE NOT SUPPOSED TO HAVE ANY CONFIGURATION ON IT. CAN YOU CLARIFY?
Step 17 Enable the server ports that had been disabled in Step 4. -
a) If you have changed port mappings, you may need to re-acknowledge the chassis or rack server connected to the subordinate fabric interconnect. DOES IT APPLY TO ALL TYPES OF PORTS – FC, SERVER, UPLINK ETHERNET PORTS?
b) Verify and if necessary reconfigure Ethernet ports as server ports.
Step 18 Promote the subordinate fabric interconnect to active, and repeat the process on the second Cisco UCS 6248 UP. Cable the second new fabric interconnect identically to the first, and allow the reconfiguration done to be applied to the second new fabric interconnect as well. DOES THE SECOND NEW 6248 NEED TO BE OFF OR ON WHEN CABLING IT? DO I NEED TO GO THROUGH THE WIZARD AT THE POWER ON TO MAKE IT A PART OF THE CLUSTER?
See Forcing a Fabric Interconnect Failover.
2). Does CISCO have a document outlining the steps for adding a chassis?
Regards,
Maxim.

I have hp compaq nw9440 mobile workstation the white screen appear and contain an error

i have hp compaq nw9440 mobile workstation the white screen appear and contain an error:
uoy computer has suffered from a non - recoverable system error please call our support line for assistance
713-634-2494

sneakypete1 a écrit:
I use Photoshop Elements 12 for my photos. I have a constant problem where my photos don't print like they appear on the screen. They come out darker than the screen shows. If brighten them in the program, I have to almost make the photo appear "white" in order to look good printed. ?????? What can I do to fix this problem??
I am ready to bet that your display is much, much too bright (like all displays at factory settings.
Why Are My Prints Too Dark

What hardware upgrades can i do on my pavilion dv6700?

what hardware upgrades can i do on my pavilion dv6700? such as ram, cpu, hard drive, etc?

Hi,
As you already mentioned above, 2 items you can upgrade for your machine:
1. CPU: Please refer to the following book to find out processors supported from day 1:
h10032.www1.hp.com/ctg/Manual/c01295877.pdf
2. RAM & HDD: Please check this:
http://h30434.www3.hp.com/t5/Notebook-Hardware/HP-pavillion-dv6700-hard-drive-and-RAM/td-p/95023
Probably spending a bit more money for a new machine is much better than upgrading the old machine.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp mobile workstation hardware upgrading

Similar Messages

Maybe you are looking for