Hp monitor 2207h won't display when tower is turned on

When tower is turned on the monitor will not display. I know it's on as it flashes the pictures & goes competely black. Even
then Iit makes the usual sounds.

Try hooking up the monitor to a different computer to establish if the problem is with the monitor or the computer's graphics card.
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you.

Similar Messages

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

FCP two monitors, 2nd won't display playback anymore

I have two Cinema monitors specifically for working with FCP. The second monitor played what I see on my canvas for two weeks. When I started FCP the second monitor went black ready to play the canvas.
It no longer does this. The first indication of trouble was when I brought a motion template to FCP which was an HD clip. The second monitor would not play it, when I stop the playback I can see the frame it was on. Then today, the second monitor will no longer work with FCP.
Any suggestions would be greatly appreciated. FCP6.

try pressing Cmd-F12 (thats View menu *> External Video > All Frames*)
also check that your second monitor is correctly assigned for preview playback
eg View menu *> Video Playback > Digital Cinema Desktop Preview - Full-Screen*

SSRS 2008 R2 Map doesn't render (won't display when you preview it)

I'm trying to create a map where it displays the count of people in my DB for each state. There are 126,000 records in the dataset. I've looked at a dozen videos and gone through step by step instructions to make sure I'm not missing something.
The map will never render when I preview it. It stays gray and no data displays. I can't for the life of me figure out what is wrong!! Can anyone point me in the right direction? I'm using the Map Gallery and doing a Color
Analytic map. I'm trying to display count(state) - but have also tried counting the id of the person. It's driving me nuts!

Hi Cfiller,
According to your description, you create a Color Analytic map using Map Gallery. When previewing the report, the map stays gray and no data displays.
In Reporting Services, a Color Analytic map must include the spatial data and the analytical data. In your scenario, since you design a Color Analytic map using Map Gallery, the spatial data is already embedded in reports located in the map gallery, then
you should add analytical data to the map. As you mentioned the analytical data for count of people comes from the database, you must specify match fields to relate the spatial data and the analytical data when designing the map. If there is no match fields
in the map, it’s expected that no data will display when previewing. So please check if you specify the match fields correctly.
Reference:
Maps (Report Builder and SSRS)
SSRS R2 Map Control Item Does Not Render in Preview
or when Deployed to Report Server
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Img alt="text" not displayed when images are turned off in Safari

I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?

It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)

HP monitor doesn't rotate display when monitor rotated

I am using a new (to me) HP Optiplex with windows 7 professional installed. I installed the drivers for the existing HP w2408h 24" Monitor from the HP website. It is supposed to rotate the display to the vertical position when the monitor is rotated, as it used to do with the HP computer it was previously attached to. An attempt to reinstall the drivers resulted in a message that the reinstallation is denied. Has an one else had this problem?

Hello Adirondaker,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having some issues with the rotation of the display on your monitor, and I would be happy to assist you!
Since you are getting an error message that states "reinstallation is denied", this may indicate that you do not have adminstrative rights on your computer. And because your Optiplex desktop is a Dell Computer, you will need to speak with their tech support in order to further troubleshoot the issue on your computer.
In regards to the software needed for your monitor, you can get your issue more exposure by posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Marker Won't Display When Y Axis in Descending Order

I'm using an RTF to create charts. I'm using bi-publisher desktop version 11.1.1 and have Office 10 loaded.
If I add markerDisplayed="true" to my line chart, the markers display on the line and in the legend. But, when I add
<Y1Axis axisMinAutoScaled="false" axisMinValue="1" majorTickStepAutomatic="false" majorTickStep="2" ascending="false" />
the markers disappear from the lines but stay in the legend.
For instance, this works (displays markers on lines and legend):
<Graph markerDisplayed="true" depthAngle="50" depthRadius="8" seriesEffect="SE_AUTO_GRADIENT" graphType="LINE_VERT_ABS"><LegendArea visible="true" /><LocalGridData colCount="{count(xdoxslt:group(.//G_2, 'PERIOD'))}" rowCount="{count(xdoxslt:group(.//G_2, 'BRAND'))}"><RowLabels><xsl:for-each-group select=".//G_2" group-by="BRAND" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="current-group()/BRAND" /></Label></xsl:for-each-group></RowLabels><ColLabels><xsl:for-each-group select=".//G_2" group-by="PERIOD" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="current-group()/PERIOD" /></Label></xsl:for-each-group></ColLabels><DataValues><xsl:for-each-group select="//G_2" group-by="./BRAND" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><xsl:variable name="G1" select="current-group()" /><RowData><xsl:for-each-group select="//G_2" group-by="./PERIOD"><Cell><xsl:value-of select="sum($G1[(./PERIOD=current()/PERIOD)]/RANKING[.!=''])" /></Cell></xsl:for-each-group></RowData></xsl:for-each-group></DataValues></LocalGridData></Graph>
Add the code to sort the Y axis in descending order and start at 1, not o, and the markers disappear from the lines but still show up in the legend:
<Graph markerDisplayed="true" depthAngle="50" depthRadius="8" seriesEffect="SE_AUTO_GRADIENT" graphType="LINE_VERT_ABS"><LegendArea visible="true" /><Y1Axis axisMinAutoScaled="false" axisMinValue="1" majorTickStepAutomatic="false" majorTickStep="2" ascending="false" /><LocalGridData colCount="{count(xdoxslt:group(.//G_2, 'PERIOD'))}" rowCount="{count(xdoxslt:group(.//G_2, 'BRAND'))}"><RowLabels><xsl:for-each-group select=".//G_2" group-by="BRAND" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="current-group()/BRAND" /></Label></xsl:for-each-group></RowLabels><ColLabels><xsl:for-each-group select=".//G_2" group-by="PERIOD" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="current-group()/PERIOD" /></Label></xsl:for-each-group></ColLabels><DataValues><xsl:for-each-group select="//G_2" group-by="./BRAND" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><xsl:variable name="G1" select="current-group()" /><RowData><xsl:for-each-group select="//G_2" group-by="./PERIOD"><Cell><xsl:value-of select="sum($G1[(./PERIOD=current()/PERIOD)]/RANKING[.!=''])" /></Cell></xsl:for-each-group></RowData></xsl:for-each-group></DataValues></LocalGridData></Graph>
I'm new to bi-pub so please excuse anything that might seem obviously right or wrong to you !
Krys

the kext may have gone funky on the Mac. see:
iPod Updater reports iPod nano or Fifth Generation iPod must be connected using FireWire
iTunes: No Photos or Videos tab in the iPod preferences pane in Mac OS X
iPod does not appear in iPod Updater or iTunes in Mac OS X

Settings won't display when opened

Hi all
When trying to pen 'settings' app. It opens but only displays a blank white screen. No information is seen.
Thanks

Press home button twice quickly, then slide the window panes upwards to delete from background memory, all of them. Then try the Settings App again. If still problem, Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself.

The jigsaw widget won't display when project is published

Hi all,
I am having trouble with the jigsaw widget. It will run when I just preview 5 slides but when I publish my project or preview in a browser it doesn't work. I just see the time and reset button but the puzzle pieces do not appear. I am using Captivate 7.
Thanks in advance for any help.
Chris

Thanks for the quick responce. I have tried deleting all of the opjects on the page just incase they were hindering it and that did not make a difference unfortunately. I should add that my project was created by importing slides from PowerPoint. Not sure if that makes a difference or not. I am new to this so I couldn't find any animation accordion or alpha settings. Here is a screen shot of my timeline though. As I said it works fine when I just preview 5 slides but but when published it doesn't seem to start playing and I just get the Reset button and the table with the time and score at the bottom of the screen.

JOptionPane Won't Display When ResultSet = null

I wrote the following method to connect to an Access database via JDBC. Everything works properly except for the dialog box. It doesn't show up when the SQL query doesn't return anything. I've tried using the JOptionPane as an if, an else if, and an else without any luck. I know the syntax of the JOptionPane statement is correct, as it works in other parts of the program. Can anyone help? Thanks, Scott
P.S. I know I should use a do while loop to populate the text fields...this is just a quick and dirty beta program.
     public void database(String query)
          try
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          String dataSourceName = "testdatabase";
          String dbURL = "jdbc:odbc:" + dataSourceName;
          Connection con = DriverManager.getConnection(dbURL,"","");
          Statement s = con.createStatement();
          s.execute(query);
          ResultSet rs = s.getResultSet();
               if (rs != null)
               while ( rs.next() )
               field2.setText(rs.getString(2));
                    field3.setText(rs.getString(3));
                    field4.setText(rs.getString(4));
                    field5.setText(rs.getString(5));
                    field6.setText(rs.getString(6));
                    field7.setText(rs.getString(7));
                    field8.setText(rs.getString(8));
                    field9.setText(rs.getString(9));
                    field10.setText(rs.getString(10));
                    field11.setText(rs.getString(11));
                    field12.setText(rs.getString(12));
               if (rs == null)     JOptionPane.showMessageDialog(null, "UPC not found!");
               s.close();
          con.close();
     catch (Exception err)
          System.out.println("ERROR: " + err);
     }

I changed the line to:
if(! rs.next()) JOptionPane.showMessageDialog(null,
"UPC not found!");
...and now the dialog box pops up every time, even if
there is data. Did I do something wrong with the
syntax?Well no.. except that by the time you check you have already iterated through the result set and next returns false.
I was thinking about something like this (and please in future use the code tags for pretty formatting like below... it makes it easier to read and the forum software will "eat" some of your code without it sometimes)
boolean hasResults = false; // new line
while ( rs.next() )
    hasResults = true; // there was at least one row
    field2.setText(rs.getString(2));
    field3.setText(rs.getString(3));
    field4.setText(rs.getString(4));
    field5.setText(rs.getString(5));
    field6.setText(rs.getString(6));
    field7.setText(rs.getString(7));
    field8.setText(rs.getString(8));
    field9.setText(rs.getString(9));
    field10.setText(rs.getString(10));
    field11.setText(rs.getString(11));
    field12.setText(rs.getString(12));
if (!hasResults) JOptionPane.showMessageDialog(null, "UPC not found!");

Flash files won't display when using DW CS3

Anyone else have this problem? The source shows there's a
flash file on my html page but it doesn't appear at all. When I
made a new page using Dreamweaver MX, I added a flash file,
uploaded it, and all was fine (except there was that annoying 'you
must click to activate' message in IE). When I open that same html
page in Dreamweaver CS3, it says that DW will fix the 'object tag'
(to get rid of that message). So it adds the code, then when I look
at the page on the Web, there's no Flash file there at all. Is
there something else I need to do when inserting a .swf file in
CS3? Thanks.

Sure it does. You forgot to upload the Scripts folder that DW
alerted you
to do.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"skimmin" <[email protected]> wrote in
message
news:f3nn2s$oio$[email protected]..
> Placement of the files isn't a problem, as the different
pages I've tested
> are all in the same directory, and I'm linking to the
same Flash file. It
> makes no sense, really. .

Mail Messages won't display on iphone 4

I have a .mac and a gmail account set up on my phone. I can see the messages in my inbox for all accounts but the individual emails won't display when I go to read them, the message portion of the email is blank. I can see the "from" an "to" and just the message is missing! Any thoughts?

Rebooting the phone seems to have solved this for the time being. I will let everyone know if it recurs.

Photos won't display

I recently bought a refurbished 80g iPod classic. Everything appeared to be in working order except that photos won't display when clicked on. When I click on a photo the screen just goes black like the photo won't load. I don't really want to return it and go through all the warranty ordeals so if anyone knows how to fix this problem please let me know.

To create and populate a new library:
*Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.*
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Webhelp topics won't display on servername with multiple hyphens

Hi
I have several webhelp topics generate with RoboHelp 8 whose html topics won't display when launched from servers whose hostnames contain more than one hyphen. We have multiple servers in the test environment. The servers with zero or one hyphens can launch the help project or individual topics with not problem. The servers with two or more hyphens can launch the project and display the nav pane, but the topics show a File Not Found error. The topics also show this error when launched independent of the frameset. Can anyone help?

William,
I have gone thru my project now and, as I stated in my May 1 mail to you, I have made duplicates of all of the "bad" topics and all of these new topics are now displaying correctly.
Now I have a related, but different issue.
Only one topic is causing that same error msg to display (refer to my original April 27 post: IE script error/syntax error; Line 13, character 1).
The only topic that throws that error msg is the initial topic that displays when the .chm file is opened (i.e., the topic that is specified as the "Default Topic" in the HTML Help Options window when I click the Generate Layout button in the SSL pod.)
Furthermore, the topic that throws the error message will only do so if it is the one specified as the Default Topic.
As an example, if I have the topic Apple specified as the Default Topic, when the .chm file is opened the error msg window will display; when the user clicks either Yes or No to the "Do you want to continue running scripts?" query, the Apple topic will display normally. Each time that topic is selected it will throw the same error msg. window.
If I go back to my project in RH and change the Default Topic to the Pear topic, re-compile the project, when the .chm file is opened the error msg will display; when you click Yes/No the Pear topic will display normally (until it's selected again). The Apple topic now displays fine at all times.
This tells me that the problem seems not to be with the Apple topic, as I'd suspected, but with something that's going on with RH and how it displays the initial topic in a compiled project. I think.
Any ideas on how I can remedy this issue?
Thanks in advance.
Dennis

IPhone4 iOS 4.0.1 won't charge when turned off

I had a 3GS that when placed in the dock (connected to my iMac which is always on) and was turned off (the iPhone that is) would charge normally and was completed in the normal amount of time (a few hours for a complete charge). When I upgraded to iOS 4.0.1, the iPhone would only charge in the dock if it was left on.
I upgraded to the iPhone4 (4.0.1) and the same thing is occurring: the iPhone won't charge when it is turned off; only when it is left on will it completely charge.
Because it happened with my 3GS after upgrading to iOS 4.0.1, I am assuming that it is a software issue with the new operating system.
I have tried a restore as recommended by tech support, but that did not resolve the issue. Has anyone else had the same problem? Any idea how to fix it so that the iPhone4 can charge when placed in the dock and is turned off? Thanks.
Message was edited by: acmd1633
Message was edited by: acmd1633
Message was edited by: acmd1633

1) stop being impatient.
We are all users like yourself... reposting one minute later is not going to get a lot of sympathy from us.
2) Clean the dock connector with a soft, dry brush
3) Try a different sync cable or charging device.

Hp monitor 2207h won't display when tower is turned on

Similar Messages

Maybe you are looking for