HP Monitor 2311x cutting-out

When I use my 2311x as an external monitor for my Macbook Pro, the monitor will start up and work until I try to move a window from the screen of my MacBook to the monitor, at which point the monitor will become disconnected from the computer.
It will then reaquire the video signal to repeat the problem. The monitor will work as long as nothing but the mouse is moved onto the screen. If I do so much as right-click on the desktop on the external monitor, it will disconnect.
When I use the external monitor in clamshell mode, i.e. with the laptop shut, the display will disconnect immediately after connecting, displaying an image for less than one second.
I have used the same cables and computer with an Asus monitor without any trouble.
This problem has been going on for a few weeks, and I had performed no software or hardware changes of any kind when it started.
Troubleshooting steps so far:
Reset NVRAM on MacBook Pro
Reset monitor by unplugging from power and holding power button for 60 seconds
Details:
HP 2311x, part number XP598A
Connected via DVI to
2010 MacBook Pro 13", OS X 10.6

Hello Jack1633
Does the same problem occur if you connect the Mac to the HP Monitor with a VGA or HDMI cable? This will help isolate the problem.
Also does the HP Monitor work on another computer or if you connect a game console with HDMI to it? This will help further isolate the problem. We can test if other devices can properly display on the HP Monitor.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

H515 Desktop Monitor Power cuts out

Help Please. I have an H515 desktop. After a period of inactivity the power will go off to my monitor. The CPU is still on but I can't get the monitor on. All my power settings are set to never turn off the display. I am running Windows 8.1. I've tried multiple monitors and I've changed out the monitor cables. No luck
Any thoughts?

Welcome to the Lenovo Community !
Have you tried booting the computer into Windows Safe Mode to see if the inactivity causes the monitor to black out ? I'm not sure if Safe Mode will totally by-pass Windows Power Management, but it is worth a try. If the monitor stays on then I would suspect a power setting or driver problem with Windows. The link below is for a little tutorial on booting Windows 8.1 into Safe Mode if needed. Step #2 is probably the easiest.
http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81
Have you tried booting into the BIOS Setup and see if inactivity blacks out the monitor ? You can boot into the BIOS Setup on your model by shutting the computer completely off then press and hold the F1 key when powering it back on. When you see the BIOS screen then release the F1 key. This would be the true test to see if your black out problem is a hardware issue since the operating system isn't loaded.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

(PProCS4/CS4 Production Premium) Dual Screens Cutting Out

AAbout a month ago I got a new computer with Windows 8.1 (64 bit). I've loaded Production Premium CS4, but about 50% of the time my monitors will cut out (and bring up NO SIGNAL, and shove everything back to one monitor) and then come back on, and it seems to do it a lot when i've got PProCS4/EncoreCS4 Running, but it'll also do it sometimes when I turn on the computer and Windows is loading.
I'Ve tested all my connections to make sure they're not loose, including the DVI-D to VGA active converter (both monitors are VGA monitors, but one of my connections is DVI-I, so the analog is able to pass through, but my other connections are digital only), but with the converter if it was that, then it shouldn't be shutting down the other monitor. I've also lowered my resolution just in case my computer was sending to much and was overloading. (I've got a Radeon HD Graphics card on an AMD A6 6400K motherboard.). I've also disabled my computer and monitor's sleep modes, and it's still occurring.
i've asked my computer builder if they have an idea, and aside from a possible defective graphics card, they were wondering, to get all questions out of the way, if maybe there might be some issue with PPro/Encore or any other program in the Production Premium suite that is causing the monitors to cut out?

Arnold,
First, you're ranting to fellow Adobe product users, not Adobe. If this were the universal disaster you're claiming, there would be many posts to that effect in the Forums. So, you're pretty much in a minority here. Have you asked product-specific questions in those product forums? If you do, lose the attitude, no matter how bad the problem -- it won't win you any friends or much help.
You do make a point about the way Help has been restructured, as some folks are not happy with the change. But Adobe claims it is the best way to have the latest help information available. Help exists in multiple forms for each app, including searchable manuals as you've used before and knowledgebase and these Forums.
As for apps not working right, you haven't told us anything about your system hardware or software, how you installed the new software, how you prepared your system for installation and what maintenance you've done. So we can't comment or offer suggestions.
But if all you want is a refund, I suggest contacting Adobe directly by phone in your area.
Neil

Audio cut out and midi miss sync

Lately I have been getting audio cut out, and the missing, 'error while trying to sync audio and midi'.
I thought it was that I had too many instances of virtual instruments. So I mixed the song down. Imported that into a NEW song, with only one audio track, and then proceeded to try to do an organ overdub...Well Logic still drops out and gives me the message, even though there is NO midi information in this file...
Then I noticed that even AIF or mp3 files, didn't play properly from the desktop preview mode. They stop too. Activity monitor doesn't seem to be showing anything overworking..
Disk Warrior fixed some volume errors,
Anyone have any ideas to try?

I'm using a motu828. I disconnected the firewire connection, and ran audio from the headphone jack to the motu, and VOILA, no problems... Last year, I went thru two motu units, not really sure if they are the issue.
I think it might be LOGIC's firewire circuitry. Apple techs couldn't find the issue, I had the G5 motherboard replaced. Another factor was I had 3 Lacie firewire drives (2 firewire 800, 1 400) I have had 4 Lacie drives die on me in the last 3 years. They are the only firewire drives I have, so I don't know if the fault lies with them, or the again Apples firewire circuitry, stressing the drives out???
I also put a firewire 800 card in my system.
I have now switched to an external ESATA raid setup. No more firewire drives. So far so good. Since I had the whole motherboard replaced, I don't know what that means in terms of MOTU connected via firewire..
For now, I'm running audio out of headphone jack, using all virtual instruments, so I know it will sound better when I get firewire audio up and running, but I got tired of it cutting out every 3 - 30 minutes. I'm thinking about the apogee duet unit. But again if it's connected via firewire, I don't know where that leaves me..
My G5 is three and half years old, perhaps it's tired and wants to be retired....
The dark part of me wonders, if Apple computers don't start crapping out after three years of heavy use, or is it that technology, software, updates, push the hardware beyond it's capacity after a few years.

Music cutting out while using airplay

I just configured my Airport Express as a client to an existing wireless network. I don't know for sure but the existing network is probably not being provided by an Airport router.
I was successful but when I try to play songs via iTunes to my stereo, the songs are constantly interrupted. It will play fine for a few seconds or ten seconds or sometimes 30 seconds, but then it will stop for a while and then start up again.
I've tried reconfiguring the Airport Express, enabling Interference Robustness and restarting the Airport Express using the admin software and by unplugging. Nothing is working yet.
Any ideas would be much appreciated! Thank you!

i am reaching a breaking point. Things are going from bad to worse . . .
I moved my new AE into the same room where my other (main base) AE was, thinking that the issue may have been that the two were having a hard time "seeing" each other and thus were dropping connections. At first, this seemed to be an improvement; when playing songs through my remote (second) AE, the music was cutting out much less frequently. Instead of dropping the music every few seconds, it would only cut out about once a song. And it improved over time; by about the fifth song, it wasn't cutting out at all.
However, I then tried to play music through the stereo I have connected to my original (main base) AE, the problems started all over again. iTunes was totaly unable to establish a connection to the stereo on the main base AE. It would say "connecting to remote speakers", and when it was "done" connecting, nothing would happen. No music would play, and the status bar on the iTunes song would stay frozen and not move.
I'll note that at no time have I ever had significant problems playing music through my main base. We've had that main base for 6 months and been very happy with it's performance, except for not being able to get to cover the whole apartment with a reliable wireless signal (which is what I was hoping to remedy by buying a second one).
This also started affecting my internet connection! After having the two AEs in the same room for about a half hour, I suddenly could no longer get any web pages to load, and network speed in the OS X Activity Monitor dropped to below 10 KB/sec, even though I was trying to load several webpages at a time.
Thankfully, when I unplugged the second (non-main) AE, performance on my main base station returned to normal. I will continue to try and troubleshoot this, but the conclusion I am drawing at this point is that although the AEs work great individually, they don't work very well together. This is very disappointing, considering Apple touts how "easy" it is supposed to be to link these together.
I did read on another thread that sometimes the AE will just crap out and die over time. Perhaps my used ebay purchased AE is just shot.

HT6114 external display cutting out

since the new update every few minutes my external display keeps cutting out and have to unplug and re plug the hdmi cable back in

Hey there jamie0105,
It sounds like your external monitor is not funcitoning correctly with the computer after updating to Mavericks even after reseating your HDMI cable. I recommend these troubleshooting steps from the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Guitar cuts out while recording

Hi All,
I'm using Garageband and the Griffin guitar connect cable and when I try to record my guitar, the recording cuts out after a few bars. Useful stuff:
-original iPad and fully up to date iOS.
-cut out is random, though the most I've been able to record is 6 bars.
-when not recording, the audio is fine
-tried restarting my iPad - no difference.
Any help is much appreciated.

There is an improvement if you leave the amp setting alone when you start, turn of monitoring and the noise gate. About 3 times out of 4 I can record 8 full bars this way. I haven't tried recording any longer passages yet. Not really a solution, but slightly better. . . .

Sustained use of Cinema display audio results in noise, choppy audio, then cutting out

When I play a sustained audio stream through my 27" LED Cinema display – for example, listening to my music collection on iTunes – for a couple hours (since I powered on my computer), the audio suddenly gets very noisy and after a few seconds really choppy (+ noisy), and waiting another few seconds it's barely audible (just repeated hints of noise). After this happens, I can press Pause in iTunes, wait a few seconds, then press Play, and the audio is perfectly fine again.
Then, after only a half hour or less, the same thing happens, and I have to do the same thing to fix it. I am always able to fix the audio perfectly fine, but it inevitably craps out again after 5-30 minutes.
If I power off my computer or let it sleep overnight, then come back and play iTunes again, the audio will be fine for a few hours before this inevitably happens again.
I've followed the advice of an Apple support technician of resetting both my NVRAM and SMC, and that had no effect. The Cinema display audio continues to behave the same.
I have the USB for the Cinema display plugged directly into my MBP's USB port (no other USB hub in the way).
I have the latest version of OS X and thus the 27" Cinema Firmware 1.0 update has already been applied (I tried applying it by downloading the firmware update manually, but it refused, saying I do not need this update).
This should go without saying, but this never happens when I play music through my MBP's built-in speakers, or when I play music through external speakers plugged into the line-out port. It's behaviour that happens exclusively through the 27" Cinema display's audio interface.
Thoughts, anyone?
I'm especially curious whether anyone else has had precisely this kind of audio problem with their 27" Cinema display. I've seen many people post audio issues relating to their 27" Cinema display, but most of those problems were remedied by the 1.0 firmware update, and besides none of the problems were described quite like mine (specifically, audio that becomes noisy, then mostly cuts out - it never completely cuts out - and that can be reliably [temporarily] fixed by pausing and playing the audio again).

Can an MBP Sound preferences output to the display as opposed to through usb? I use a mac pro and have those two choices for my mini-displayport 27" apple display.
I am not suggesting this as a fix but only testing various other paths to try to diagnose the problem.
What first came to mind in your description was that you are having some kind of temperature problem. And I think the temp problem lies with the MBP and not the display. To that end you might consider adding one of the temp monitor utilities like iStat Pro, iStat Menus, Temperature Monitor, Temperature Monitor widget, Hardware Monitor, etc. See if there some correlation with the temps shown in some of the readings and your sound problem.

Mini cutting out after a few minutes

This problem has only developed in the past month or so. Basically my mini cuts out and shuts itself down entirely after only a few moments of running.
It did this once before when I was experimenting with iMovie years ago. I assumed it was the overheating safety measure kicking in as I was putting the machine under a lot of strain and the fan was going pretty loudly. As it didn't seem to have caused any major damage and it worked okay after cooling, I figured it was okay.
A couple of months ago I was running a few programs at the same time when the fan seemed to power up quite loudly again and it cut out again. Since then, the problem has become progressively worse. At first the fan would begin powering up for no real reason (running simple programs, machine temp monitor showing normal temperature) and now it will shut itself off after a minute or so of running regardless of whether I'm running any programs at all and before even the fan starts up. As such it is unusable and it is not even stable enough for me to do any real backup or get any of the important documents off the machine.
Things I've tried:
Cleared as much dust as possible from the vents that may be interfering with airflow
Made sure it's got plenty of space around it
Reset the PMU
Booted up from an external HD with a new minimal MacOSX install on it and booted up with as little connected or running as possible.
The problem has persisted.
Are there any other suggestions for things I might try? Thanks in advance.

Welcome to Apple Discussions!
The first part of your description certainly sounds like the protective shutdown due to overheating - particularly considering the increased fan speed immediately in advance of the shutdowns. However, the second part - where you describe shutdowns happening rapidly after booting the system up, and not seemingly associated with fan activity are not quite such classically clear protective shutdowns.
Even so, it seems pretty clear your mini is suffering overheating - and the fact it has done so before, and the problem not resolved, means that thermally induced shutdown is the most likely cause of the system behaviour you describe, and that it may be that the original problem was that the CPU heatsink may not have been firmly attached or that the thermal paste may have been misapplied or quickly degraded.
In this situation I'd open up the system and make sure that any and all debris inside is removed. even after you cleared the vents, there may be a considerable amount of dust and debris that has accumulated inside the system, and given there's not much room inside the casing for air to flow, even small amounts of extraneous material in there can cause problems. While the top is off, I'd also check that the fan is actually working.
Assuming all is clear and the fan running correctly, the next most likely problem is that the CPU heatsink is loose. After that, there is a possibility that the thermal pad needs replacing. This is a small pad that fits between the underside of the logic board and the base of the system with the purpose of draining some heat away from the processor to the base, and thus away to the surface on which the system sits. In itself, a failed pad would not be expected to cause the swift shutdown of the system you are experiencing, however, so disassembling the system purely to replace this is not likely to resolve the problem directly.
I would also be inclined to look at the power brick to see if there is an issue with that. If you know someone with a Mac mini (even a later Intel model), see if you can borrow their PSU for a brief test, or better yet, take your mini to their house and test it there. If the problem continues with a different PSU in a different location, and there is no problem with the heatsink or fan, then I suspect that over time your mini has been heating to higher temperatures than normal, and that eventually this had led to heat stressing of components that has now given rise to failure. You may find that if you run the system with the top casing removed and a fan blowing on it, that it will function long enough to rescue files. Trying this would be a good test to see if the problem is directly heat related.

Premiere Pro CC Audio Cuts Out

Okay,
So I've switched to the new Premiere Pro CC and now my audio drops out during playback. Doesn't matter if it's an aiff, mp3, whatever. I never had this problem with Premiere Pro CS6. All files are saved to an XServe Network on OS 10.8.4. I'll have to remain using Premiere CS6 for the time being.
Also, just tested this out. I had a TIFF sequence playing with this audio. It did NOT like that. I can play the audio by itself just fine. So it seems to be a problem with playing the video file WITH the audio.

This happens on nearly every project I start in Premiere Pro CC.
It's really frustating and makes editing very difficult. It is almost impossible to watch the flow of an edit.
I used Premiere CS6 and this never happened. In fact I got my entire office to switch from Final Cut 7 to premiere recently because CS6 was so great and chugged through footage without the hassle transcoding. I very much want this issue resolved.
I am typically working with multiple layers of video and 1 layer of audio - footage straight out of Canon 5D Mark III
This even happens when you quote un quote "render audio" which doesnt make sense to me.
Happens when you render the enite video video with render all effects.
I work on a decked out mac book pro at my office
and a fairly decked out mac mini at my house (though i realize it is still a mac mini)
This happens both when running on an internal drive or firewire 800
I just watched my activity monitor - it seems to happen when the free ram goes to less than 100mb -
however the ram fluxuates a lot when playing back.
I am currently working on a projcet that is 2:30 long. The only applications open are premiere, safari and the activity monitor.
I just opened premiere and flushed the preferences by holding option and shif
Watched the video once entirly with no issue (it was rendered mostly from last time I was working) my free ram started at about 3 gigs available the first time I watched. When it was done playing I had about 1 gig available
I stated playing the video again and the ram went down again to nothing and audio stopped - audio levels die (even though there is audio there) - video played okay. pressing play immediatly to start it fixes it temporarily but then it cuts out again
I went back to the begining again and this time deleted my render files. playback on both A/V were very poor.
I dont know too much about computers but it seems to be a ram issue - this being said my mac mini which i am on right now has 8 gigs and my mac pro at work has 24. Both should be sufficient ram.
Thanks for your help and look forward to Adobe's fix for this issue. I hope it is as pressing for your team as it is for all of us.

Sound Cuts Out During Playback-Sound Card/Audio Interface Necessary?-

I'm a voiceover artist with the following setup:
Sennheiser MKH 416 P48 U3 Microphone
Yamaha HS80M Reference Monitors
Mackie Onyx-i 1220 Mixer
Adobe Audition CS6
Dell Inspiron 1720 laptop (Intel Core2 Duo, CPU T5750 @ 2GHz, 32-bit)
Until recently, I could hear anything I recorded or pre-recorded items with no issues. However, now, as I listen to anything, the sound 'cuts out' (latency issues?). The meters on Audition will still be moving, but I'll get no sound from my monitors. I upgraded to Windows 7, hoping and thinking this would solve the issue, and that Audition would play nicely with Windows 7. This 'solution' seemed to have helped, but ultimately, it did not resolve my issue. At this point, I believe it's my sound card. My studio quality setup seems to be too much for my consumer grade sound card. Because my Mackie has an interface built into it, I did not believe that I needed an interface. However, I'm beginning to question that. So, that's part of my question. Is an audio interface necessary for me even though I have one built into my Mackie? If so, based on what I list for my system, does anyone have any recommendations for interfaces? If I do not need an interface, I'd appreciate any suggestions or ideas as to what's causing the sound to 'cut out' and how to resolve it. Any and all help, I thank you for it in advance!
E

Finally! I wrote a reply a few hours back but the fine folks at Adobe took the site down just before I hit send! Lucky I saved it elsewhere because the "recovered post" was only the first couple of paragraphs.
Anyhow, take 2.
Well, first off, your Mackie Onyx mixer has a firewire interface built in so it, in effect, becomes your sound card. The one in your computer isn't involved in the recording/playback process at all (at least not unless you're trying to do something like monitor via the computer card rather than the mixer). Therefore, buying another sound card/interface won't help at all.
Similarly, audio dropouts aren't a latency issue, at least not directly. Latency is the delay in the audio as it does the round trip via you sound interface (mixer) and computer. It's more of an issue for musicians trying to be beat accurate as they over dub tracks. However, the latency controls could be affecting your drop out problem. The latency control in Audition is effectively controlling the buffer size--and having a larger buffer (which increases latency) also gives you playback more protection against glitches when your computer gets busy doing something else. So...the first thing to try is increasing the latency/buffer size on the Edit/Preferences/Audio Hardware menu.
Another thing to check is that you're using the latest drivers from Mackie--check their site and download/install the latest if there are some available. If there's a choice, go for ASIO drivers rather than MME if there are some available.
Also, I mentioned your computer getting busy with other things--for serious sound work shut down everything else on your computer. Pay special attention to networking, wifi, and anti virus software, all of which are usualy prioritised to grab processor cycles over your sound work. Also make sure you shut down all system sounds.
Hope at least one of these suggestions works for you.

Motu 828 Keeps cutting out !!!

Hi All
My Motu 828 Mk I keeps cutting out and in turn this also removes my other Firewire device, an External Lacie Hardrive. Then if continue to play the track in Logic i get a loud nasty Audio signal and have to quicky turn down the monitoring.
If anybody knows whats going on here or have had similar experiences please do let me know....
Pulling my hair out at the minute
Many Thanks

Check the FAQs on the MotU site for how to reset your interface.

AirTunes sound constantly cuts out on Laptop

Both me and my roommate play our iTunes through the single house stereo via AirTunes, me on my iMac and her on her MacBook. I never have problems with my playback, but half the time she uses it the sound will cut out constantly. There will be a few seconds of sound, then a few seconds of silence, on and on.
It's very annoying.
Neither of us experiences any problems or cutting out with using the internet at all, even while this AirTunes problem is happening.
We've tried setting the iTunes streaming buffer size to large. I've lowered the security on the Express to WPA only, increased the multicast rate to 11 and enabled interference robustness. We've also tried closing all other apps on her machine and installing more RAM. none of which has helped the problem.
She's using a MacBook2,1 and OSX 10.4.11
Any help would be much appreciated as this is driving us both mad.

Thanks for the welcome!
And for the info. At first i thought this might be a good lead, since for the first time in the months since i bought the Express my iMac iTunes started having this problem as well (though this is probably just because i hardly use the AirTunes feature). But lowering the multicast rate doesn't seem to have any affect on the issue either. So i've effectively ruled out the multicast rate as any sort of cause/solution to the problem.
I've tried watching the network activity monitor when this is occurring, but see no correlation between the network activity and the periods of silence from the AirTunes.
The wiring doesn't seem to be a problem either, as i can hook up either computer to the jack going into the express and it plays just fine.
Maybe i just have a dud Express unit?

AirTunes Repeatedly Cuts Out...

Using an Airport Express exclusively for AirTunes; recently moved to a new place-- the distance between computer & stereo has increased, but still well within 150ft... The connection to the airport express is very spotty-- iTunes constantly loses the connection to the remote speakers-- a few seconds on, a few seconds off. Of course, as I'm writing this, it's maintained connection for a few minutes, but that's rare.
Is this a range issue or interference with some other source (from the neighbors perhaps)? Would a second airport express strengthen the signal or is this a lost cause?
Got the recent firmware updates, iTunes is up to date; have done the hard and soft resets of the airport express multiple times...

I had a similar problem with airtunes as Kumquat, I think. Airtunes repeatedly cut out. I seem to have fixed it with latest 6.3 firmware for Airport express, setting security to lowest 40WEP, turning on interference robustness, setting different channel, and setting maximum buffer in iTunes. This seems to hold even when microwave is in use, which is a first for my network.
However, I took the advice of downloading the Apple Airport management Tools which have given some interesting results.
I run two airport express unit on same network and have two Apples - one an iMac G4 (2.1) running 10.3.9 and 802.11b airport card, the other an iBook G3 (PowerPC 750) running 10.3.0 with airport 802.11b. AEs are set to 'b' only. (Computers are different software build because I forgot password for the G3)
Running airport client monitor on each gives:
G4 signal -40dB and noise -100dB with transmit rate steady at 11Mbps until I run iTunes (6.01) when transmit rate drops frequently to zero and trace looks like an irregular saw blade.
G3 shows signal strength positive ie +60dB and noise +5dB and when running iTunes (4.7) the transmit rate remains steady at 11Mbps.
I don't understand the difference between the signal strengths of each compute - why one is on positive scale and one negative.
And I don't understand why the transmit strength behaves so differently between each computer. I'm going to log on another G4 with similar hardware/software build in the next few days and see what the difference is.
You might ask why I'm bothering given that Airtunes seems to be fixed at the moment but no doubt, like many of you, I expect the problem will return and understanding more about the causes should help me when it does.
Incidently Airfoil 2.0 gave similarly varying transmit rates on the G4 so I guess that lets iTunes off the hook.

FMS Streaming Cuts Out and VOD restarts

I just purchased and installed FMS for my music streaming service. I got the streaming set up fine so that it streams mp3s using the VOD application, but quite regularly the stream will just cut out and the VOD application in the administration section will just disappear and restart with 0 clients. It doesn't even happen when I have that many connected clients, at times it's happened with just 15 users, and i've had Red5 running over 200 clients at a time. Does anyone know what the problem could be? This is a real pain as I have to monitor the server all the time!
Thanks in advance for help

Here is a the access log about a minute before and a minute after;
session disconnect      2010-03-07      16:07:47        2219    192.251.46.22   3152    2643314 -       -       -       -      200     -
stream stop    2010-03-07      16:07:47        2219    78.163.21.165   3156    352980 1254779183-hyphy-movement       348536 5877297 244.740000     408     -
session disconnect      2010-03-07      16:07:47        2219    78.163.21.165   3156    352980 -       -       -       -      200     -
session connect 2010-03-07      16:07:48        2219    78.163.21.165   3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:07:48        2219    78.163.21.165   3154    3433    1254894612-full-of-love 0       3118008 311.588000     200     -
stream stop    2010-03-07      16:07:49        2219    78.163.21.165   3154    66006   1254894612-full-of-love 62146   3118008 311.588000     408     -
session disconnect      2010-03-07      16:07:49        2219    78.163.21.165   3154    66006   -       -       -       -      200     -
session connect 2010-03-07      16:07:49        2219    78.163.21.165   3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:07:50        2219    78.163.21.165   3154    3433    1254894612-full-of-love 0       3118008 311.588000     200     -
session connect 2010-03-07      16:07:54        2219    76.110.144.163 3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:07:54        2219    76.110.144.163 3146    3433    1256177130-keys 0       5893141 294.452000     200     -
stream stop    2010-03-07     16:07:55        2219    76.110.144.163 3180    41911   1256177130-keys 125854 5893141 294.452000      408     -
session disconnect      2010-03-07      16:07:55        2219    76.110.144.163 3180    41911   -       -       -       -      200     -
session connect 2010-03-07      16:07:58        2219    67.167.64.133   3073    3073    -       -       -       -      200     -
stream play    2010-03-07      16:07:59        2219    67.167.64.133   3167    3433    1266936495-ciarra-new-school-r&b-hit    0       5195687 216.398000      200     -
stream stop    2010-03-07      16:08:00        2219    78.163.21.165   3252    159621 1254894612-full-of-love 155231 3118008 311.588000      408     -
session disconnect      2010-03-07      16:08:00        2219    78.163.21.165   3252    159657 -       -       -       -       200     -
stream stop    2010-03-07      16:08:04        2219    67.167.64.133   3167    232939 1266936495-ciarra-new-school-r&b-hit    228787 5195687 216.398000      408     -
session disconnect     2010-03-07     16:08:04        2219    67.167.64.133   3167    232939 -     -     -     -     200     -
session connect 2010-03-07      16:08:04        2219    41.226.28.173   3073    3359    -       -       -       -       200     -
stream play    2010-03-07      16:08:04        2219    41.226.28.173   3160    3433    1267131270-the-great-takeover   0       7147171 178.677000     200     -
session connect 2010-03-07      16:08:05        2219    74.208.17.122   3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:08:06        2219    74.208.17.122   3175    3433    1262724331-the-rain(rick-ross,trae,jadakiss)    0       5401516 269.871000     200     -
session connect 2010-03-07      16:08:21        2219    65.78.92.157    3073    3106    -       -       -       -       200     -
stream play    2010-03-07      16:08:23        2219    65.78.92.157    3159    3433    1267825844-(hott)pontificate    0       5496998 229.041000     200     -
session connect 2010-03-07      16:08:34        2219    99.188.116.177 3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:08:34        2219    99.188.116.177 3168    3433    1267678096-take-it-fast,-take-it-slow   0       3607949 180.192000      200     -
stream stop    2010-03-07      16:08:55        2219    41.226.28.173   3160    268371 1267131270-the-great-takeover   388292 7147171 178.677000     408     -
session disconnect     2010-03-07     16:08:55        2219    41.226.28.173   3160    268371 -     -     -     -     200     -
session connect 2010-03-07      16:08:55        2219    67.167.64.133   3073    3073    -       -       -       -       200     -
stream play    2010-03-07      16:08:55        2219    67.167.64.133   3167    3433    1266936495-ciarra-new-school-r&b-hit    0     5195687 216.398000     200     -
session connect 2010-03-07      16:08:56        2219    41.226.28.173   3073    3073    -     -     -     -     200     -
stream play    2010-03-07     16:08:57        2219    41.226.28.173   3160    3433    1267131270-the-great-takeover   0       7147171 178.677000     200     -
stream stop    2010-03-07      16:08:57        2219    74.208.17.122   3175    1111599 1262724331-the-rain(rick-ross,trae,jadakiss)    1104464 5401516 269.871000     408     -
session disconnect      2010-03-07      16:08:57        2219    74.208.17.122   3175    1111599 -     -     -     -       200     -
session connect 2010-03-07      16:08:59        2219    74.196.46.226   3073    3359    -     -     -     -     200     -
#Date: 2010-03-07
#Fields: x-category     x-event date    time    x-pid   c-ip    cs-bytes        sc-bytes        x-sname sc-stream-bytes x-file-size     x-file-length   x-status        x-comment
session connect 2010-03-07     16:09:07        17009   74.208.17.122   3073    3073    -     -     -     -     200     -
stream play    2010-03-07      16:09:07        17009   74.208.17.122   3175    3433    1262724331-the-rain(rick-ross,trae,jadakiss)    0     5401516 269.871000     200     -
session connect 2010-03-07     16:09:20        17009   195.202.232.59 3073    3073    -     -     -     -     200     -
stream play    2010-03-07      16:09:20        17009   195.202.232.59 3159    3433    1255111445-young-jeezy-style    0       2868224 179.200000     200     -
stream stop    2010-03-07     16:09:21        17009   195.202.232.59 3159    103043 1255111445-young-jeezy-style    99155   2868224 179.200000     408     -
session disconnect     2010-03-07     16:09:21        17009   195.202.232.59 3159    103043 -     -     -     -     200     -
session connect 2010-03-07     16:09:22        17009   195.202.232.59 3073    3073    -     -     -     -     200     -
stream play    2010-03-07      16:09:22        17009   195.202.232.59 3154    3433    1267734408-take-my-time 0     6694849 278.909000     200     -
session connect 2010-03-07     16:09:24        17009   65.204.3.114    3073    3073    -     -     -     -     200     -
stream play    2010-03-07      16:09:31        17009   65.204.3.114    3167    3433    1266936495-ciarra-new-school-r&b-hit    0       5195687 216.398000     200     -
stream stop    2010-03-07     16:09:38        17009   65.204.3.114    3201    302765 1266936495-ciarra-new-school-r&b-hit    298405 5195687 216.398000     408     -
session disconnect     2010-03-07     16:09:38        17009   65.204.3.114    3201    302765 -     -     -     -     200     -
session connect 2010-03-07     16:09:59        17009   217.171.129.67 3073    3073    -     -     -     -     200     -
stream play    2010-03-07      16:09:59        17009   217.171.129.67 3160    3433    1267131270-the-great-takeover   0       7147171 178.677000     200     -
I can't see anything out of place there but I could be wrong. This is the edge.00.log
2010-03-07     16:09:01        15375   (i)2581250     Edge disconnected from core (2219).     -
2010-03-07     16:09:07        15375   (i)2581252     Registering core (17009).     -
2010-03-07     16:11:18        15375   (i)2581250     Edge disconnected from core (17009).    -
2010-03-07     16:11:21        15375   (i)2641213     Connection rejected by server. Reason : [ Server.Reject ] : Virtual host is not available.     -
The connection rejected line repeats for a while until I start the VOD application manually. There don't seem to be any other error messages in other logs.

HP Monitor 2311x cutting-out

Similar Messages

Maybe you are looking for