HP Notebook 1000-1227TU Recovery - Error code: 0xc0000225

Hi there,
Model: HP 14" Notebook 1000-1227TU
OS: Windows 8
I ran into a serious issue with my newly bought HP Notebook. I used EASEUS Partition Master software to resize C: drive from 275GB to 70GB, then allocate the new partition 205GB to F: drive (D: is recovery, E: is DVD). After clicking apply, the system reboots (and downloading windows updates).
Upon reboot, the following error message is shown. I can not choose to boot from recovery etc.
===========================================
Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your administrator or PC manufacturer.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware Settings
===========================================
This laptop is a gift to my parents and I am heading to my hometown in 2-days (in overseas). Pls help and provide assistance asap. Tks.
Rgs,
CK

Hi,
Press the power button and immediately tap the Esc key to enter the Strtup menu. In the Startup menu choose diagnostics and test the hard disk and the test the memory.
Post your results here in your thread.
If the results are a hard disk fail then the hard disk must be replaced with a new one.
Is your notebook still in warranty?
If the results are hard disk passed then the following procedure should help you.
You can download and create a live usb version of Gparted.
Boot to the USB flashdrive you used when creating the utility. Enter the Gparted partition editor and mark the recovery partition as active. Once that is done, restart the PC and it should boot right into the Recovery manager.
In the Recovery manager you can perform a Factory Image recovery to return your notebook to the state it was delivered to you.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Error code 0xc0000225

hi there,
model:Hp Pavilion 17 Notebook pc
os:windows 8.1
If i do partion in my Hp laptop using partion manager the pc will restarting and i got following error:
and i have not make any recovery cd
so plzz.. help me urgently what can i do now
Recovery
Your pc needs to be repaired
A required device isn't connect or can't be accessed.
Error code:0xc0000225
You'll need to used recovery tools on your installation media. If you dont have any installation media(like a disk or usb device),contact your system administrator or PC manufacturer.
Press Enter to try again
Press F8 to start up setting
Press esc for UEFI Fireware Settings

1. Please try F11 Key during startup
2. Select Internal CD/DVD Drive
3. Select System Recovery under Recovery Manager
4. Follow the On-Screen Steps to complete the installation
Hope this step will help you resolve the issue
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

DV-7 Recovery - Error Code 105

Hello, I'm having an issue rebooting my dv7-1130us laptop (OS is Windows Vista) from the recovery discs and the hard drive is brand new since I thought that was the issue. It gets to 30%-50% and shows error code 1005 but the discs are in good condition. I have spent hours researching this and tried everything recommended in BIOS settings. Please let me know of the possible causes of this issue.
Thank you!
Jason

Which version and type(32 or 64-bit) of Vista is installed?
There are download links for the ISO image files in the following thread as well as an explanation of how to use it to reinstall the operating system.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Windows-Vista-7-and-8-ISO-Image-file-Download-Links/t...
Installing the OS this way is the least expensive option. You can still download the drivers from the web support portal for your notebook on the drivers page.
Drivers for your notebook
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=3795...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Recovery Error Code 100a

Hi
I Have the Pavilion dv5 Laptop and out of the blue it just stopped loading Windows instead it keeps stalling on the HP Recovery Screen and no matter how many times i try re-booting it just keeps halting on this screen. So I tried doing the System Recovery and as soon as i click next to begin a message box comes up saying "Error Code 100a if this keeps occuring contact HP". I've tried Googling this error code and have found different reasons for the error ranging from Hard Drive Failure to Motherboard Failure. I have run the diagnostics tool and the Hard Drive passed all tests as did the Memory. Has anybody else encountered this error or have any idea what it could be.
Thanks

Hello,
Please make sure that there are no USB drives or external devices attached. _if the problem continues and you cannot run the F11 recovery - Call HP @ 1800 HP Invent and they will send you a free set of recovery disks if you are still in warranty.
thanks!
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

Pavilion A6430f recovery error code

Hi,
I have a Pavilion a6430f desk top and I just replaced both hard drives on it. I inserted my recovery disk and began the recovery process when I received an error code of 0x400 100 130000 1002 as the hard drives were just beginning the reformatting of the Windows partition of the hard drive. I checked to make sure the hard drives were installed properly and it appears they are installed correctly. I have not been able to find any information online on how to solve this issue. Any suggestions for solving this problem would be greatly appreciated. Thanks in advance for your assistance.

I think you have a bad hard drive, it needs to be replaced.
Did you make the HP recovery discs when you got the PC?
If not you will need to order a set, then replace the hard drive and use the recovery set to install the Operating System.
You can order recovery media here if you do not have them
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have important data on the old hard drive I can show you how to save it once the new hard drive is installed and recovery has been performed, do not throw away the old hard drive

HP Notebook breakdown/ Ask for recovery / Error code 0xc0000034 HELP

Hello,
Last week my PC broke down after I turned it off manually. Since then, when I turn it on I fell directly on the 'Recovery' blue page. Saying
'Your PC need to be repaired. The Boot configuration data file is missing some required information...'
Then if I press Esc for UEFI Firmware settings, I can select 'Actualize my PC', but when I select that it tells that the windows lector is locked, so basically I cannot do anything.
Also I don' have any installation CDs because these 'new' PCs come with nothing.
In advance thanks, I think its manageable but I just dont know anything about PC and I really dont know what to do. Also I would like not to loose my data if possible.
S

Hi @nanotsong
Welcome to the HP Forums! I see that you are getting a Boot Configuration Data file is missing error message. Did you happen to create a set of recovery CDs when you first got your notebook? You will need either those or an installation disk to repair the file. Try seeing if you can borrow an installation CD if you didn't create the recovery CDs.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

need help please...
I used EASEUS Partition Master software to resize C: drive from 290GB to 50GB, then allocate the new partition 240GB to F: drive
when i try to boot from partition recovery by pressing f11 the following error message is shown

Hi,
Changing the partition sizes or deleting a partition fomr the original partition scheme causes the loss of the ability to access the recovery manager from the normal method. That ability can be resored by preformaing a factory image recovery. Be aware that a recovery is a destructive process and that makes it very different from Windows system restore. It is also an irreversible process.
You will have better results in your attempt to execute a recovery if you use a recovery disk set or usb recovery media.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Internet recovery error code "4403f"

i searched for solution for this issue and no one answer it. and i wish someone well..
so my problem is that i don't have an recovery HD so when i use the internet recovery it gives me ("apple.support" with code 4403F) and stuk ..
plz don't just read my probelm .. find me an answer plz .. thank you very much

tee144.. first that just isn't a nice answer..   Bashing someone for not knowing something is just wrong. and I was always told if your not part of the solution your part of the problem.
Second..   Alex's post was just about worthless as yours..   Because Googling some words and posting other responses.. ah dah don't mean anything especially when its incorrect
Lastly.. all the other posts on solutions for this PROBLEM - are just wrong and plain shots in the dark. because it is NOT a firewall or port blocking problem.. period.
I have perfect internet - no firewall.. Spent time on this issue (as I am working on it for a client) by trying several different internet provides at different locations that I own.. result was always the same
So I went further by checking the traffic with a packet capture.. Apple just is NOT answering back..    the only resolve can come from Apple because my traffic goes out to them and gets no replies..

Iphone recovery error code 1602

How recover a iphone 3 without itunes. There is no back up made of this phone.

was kinda hoping would be able to get it sorted without doing that as there isnt a store that close to me :-/ ive booked a call back so hopefully they might be able to help

Error code 0xc000025, cannot install or recover windows

Hello,
I have ENVY 15-j002ex laptop and unfortunately I didn't recover the windows on an external device or disk. I was trying to partition the hard disk but it failed and after I restarted, I got the following error.
Your pc needs to be repaired
A required device isn't connected or cannot be accessed.
Error code:0xc0000225
you will need to use the recovery tools on your installation medi. if you don't have any installation media, contact your system administrator or pc manufacturer.
Press Enter to try again
press F8 for startup settings
press ESC for UEFI Firmware setting
And F8 doesn't work at all.
What I tried so far is:
1- I formatted the C: parition (seems to be a wrong move) but I still get the same message
2- boot from internal disk (since the recovery partition is there) but it gets the same error.
3- I changed the bios to boot from external CD and booted another Windows 8.1 Cd but it says " the product key entered does not match any of the windows images available. I tried to get my OS rpoduct key (I know it is in the bios) but couldn't reach it.
4-When installing OS fails, I have an option to totally reset the PC, I tried it but it didn't work
PS. I found a solution through microsoft that includes OS product key but I couldn't reach it.
PPS. I managed to copy my personal data from the hard disk. So I only want to install a new OS.
Thanks.

Looks like the only way to get you system back is to perform a factory restore using the recovery disks hopfully you created when you got the computer, if not see below
If you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks.
Otherwise the WorldWide site:
http://welcome.hp.com/country/w1/en/support.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Error Code 0xc000185

Two weeks ago I purchased a brand new HP notebook HP 15-p091-sa as a Christmas gift for my son. I'm dismayed to find that it is already displaying the following message on a blue screen: "Recovery - Your PC needs to be repaired. A required device isn't connected or can't be accessed. Error code: 0xc000185. You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device) contact your system administrator or PC manufacturer". Having searched the internet, there is nothing that I can find about how to fix this error code and the HP website isn't proving to be of much help either as it doesn't give any indication as to what the problem is. To make matters worse, I didn't get any installation media with the notebook so don't have a clue as to how to fix the problem. Any ideas on how to fix much appreciated.

Sandie
Usually first thing to try out is to do a quick and extensive hard drive tests:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=c03467259
Then if no failure occur on completion, you could use Recovery partition in your laptop hard drive or order a Recovery media directly from HP for repairing the Windows.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=c03489643
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=bph07143
Please go through this thread for steps on repairing:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Error-code-0xc0000185/td-p/...
But since the laptop is new and only 2weeks old, I suggest you contact the dealer directly informing them of the problem & get replacement unit if you can.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

My Pavillion G6 - 1a52nr gets error code (ks.sys) upon startup

My computor keeps restarting because of error code (ks.sys), it then restarts auto and I can not do anything. Any suggestions. And I am not able to troubleshoot since I can not keep it on long enough. thx

Hi @SeaDog90 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g6-1a52nr Notebook and issues with error code (ks.sys) upon startup. This error is linked to either software that you have just installed or new Hardware that is connected. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 8.
If you installed new hardware try to remove it from the Notebook to see if this helps.
Can get to safe mode with command prompt?
F11 upon startup choose safe mode with Networking.
Then you can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I recommend doing this for at least 2 weeks prior to this happening.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Error Code 0x116 when recovery install for dv6-3120ew is made - HELP !!

Hello!!
I have a problem with HP DV6-3120ew with Windows 7 Home Premium 64 and ATI ARDEON 5470 HD.
I decided to preinstalled system to new, so I start recovery procedure.
1) I formatted disk C:
2) recovery start unpack files to disk
3) instalation was start, one reset done
4) after restart HP INstallation start install drivers
So right now Blue Screen swhow with code error 0x00000116 and after that sytem restart - loop !!
all the time restart and blue screen ...
I start procedure recovery two times and this same happend.
I used command line and read that system use ATI drivers 8.741.1.1000.
If I start system in Safe Mode Windows can't finished installation and ask me for start sytem as normal.
When I replace atikmpag.sys for vga.sys for standard VGA drivers I receive info that windows can't finished installtion and I have to start installation again.
When after F8 button I try to use VGA resolution - I see black screen without any errors. But system still using I think ATI drivers just resolution is VGA.
So System doesn't work at all.
Right know I want to replace drivers from ATI to standard VGA, how I can do this ?
BR
Zbigi

Hi @Zbigi ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3120ew Entertainment Notebook and system recovery failing. Here is a link to the Graphics driver for your system.
You will have to recover the system with your recovery disks that you created. Here is a link to obtaining recovery discs.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Recovery disc error code: 0xe0ef000e

Back in December I started getting warning messages about my SMART Drive failing and was told to create recovery disks for my Pavilion dv-7 Notebook, which I did. A few weeks ago the hard drive crashed and I replaced it. When I went to recovery page my disks did not work and I received the following error code: 0xe0ef000e. I looked on HP support website and saw where I could order new recovery disks which I attempted to do and they are not available. So I have a 2 year old $1000 laptop for which I just bought a new $100 hard drive and it's unuseable. Any suggestions on what to do next?

Hi,
There are a couple of options.
1. You could try the reliable 3rd party reseller Here.
2. Here's an alternative ( and cost free ) option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found by entering either your Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 8 Recovery failed; Error code: 0xc000000f

Hi,
I am having some trouble with my HP Envy m6 laptop.
I was using Windows 8 pro for almost a year without having any problem. After installing Win8.1 Pro, I had trouble booting and called in HP support and conducted a System Recovery. Everything was good but system was slower.
So, I backed up all data and then proceeded to do a Factory Reset (with HP Recovery Manager) with my HP Recovery DVDs which I have burned earlier. Everything seems to be working fine however the restoration failed (Incomplete restoration)! Tried couple of times but same problem.
While conducting some self-tests, 'Memory Test' (under Run-In Test) failed with "FAILURE ID: RGCD5F-6G56SV-XV7X0K-406803".
At the end, got following error:
"Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture."
I tried to reach HP Support since still have warrenty but unfortunately I just wasted my time talking to them. I purchased my laptop from Canada but currently living in Australia which made it really difficult to communicate with them.
Can anyone please give me some idea what I needed to do to resolve this issue? I went through several articles in here but failed to get the correct ones. Most of them are for Windows 7 and there are many differences in Windows 8!
I am urgently requesting some assistance from a HP expert who has experience dealing similar issues.
Thank you.
Best Regards,
Suranjit

The failure ID that you have provided for the memory test means that the Checksum has failed. This means that it is not finding a part that should be available, but is not showing. After taking a look into the issue of the memory test failing, the most likely cause of the failure is one memory modules has failed. I have included a link to another HP Forum thread here. Please follow the steps that DavidPK has outlined.
For the recovery error message that you are getting, this means that an integral component used during startup can not be found. This error should resolve itself once the memory Checksum error is resolved.
If your notebook has two memory modules, you should be able to boot from the one memory module until the other one is replaced.
Please let me know the outcome of the troubleshooting, thank you.
I worked on behalf of HP

HP Notebook 1000-1227TU Recovery - Error code: 0xc0000225

Similar Messages

Maybe you are looking for